What is the purpose of the part of the male reproductive system that is
highlighted below?
A. Mixes sperm and semen
B. Creates the fluid in semen
C. Manufactures sperm cells
D. Stores sperm cells until they mature
O
Answers
Answer:
A
Explanation:
Unlike the female reproductive system, the most parts of the male reproductive system are located outside the body. The mentioned part in the given diagram is urethra and it Mixes sperm and semen. The correct option is A.
What is male Reproductive system?The male reproductive system includes the testes, scrotum, spermatic ducts, male accessory glands and phallus. All these organs work together to produce sperms, the male gamete, male sex hormones and other components of semen.
The phallus and urethra are the parts of both the reproductive and urinary systems. Scrotum, seminal vesicles, vas deferens, testicles and prostate constitute all the remaining male reproductive system.
The urethra is a tube like structure which is the region included in the urinary tract that takes the urine from the bladder where the semen is ejaculated.
Thus the correct option is A.
To know more about male reproductive system, visit;
https://brainly.com/question/940283
#SPJ7
Related Questions
Which of the following is most likely a homogeneous mixture?
O A. A tossed vegetable salad
B. Chunky peanut butter
O C. Chocolate chip cookies
OD. A vanilla milkshake
Answers
Answer:
D)A vanilla milkshake
Explanation:
That’s the case because you can’t physically separate the different posts that make up the mixture.
If a buffer has an initial pH of 6.34 and the acid has a Ka of 3.46 × 10-4, what is the ratio of conjugate base to weak acid in the buffer system?
Answers
Answer: The ratio of conjugate base to weak acid in the buffer system is 758 : 1
Explanation:
The dissociation constant for acid = [tex]K_a=3.46\times 10^{-4}[/tex]
pH = 6.34
First we have to calculate the value of [tex]pK_a[/tex].
The expression used for the calculation of [tex]pK_a[/tex] is,
[tex]pK_a=-\log (K_a)[/tex]
Now put the value of [tex]K_a[/tex] in this expression, we get:
[tex]pK_a=-\log (3.46\times 10^{-4})[/tex]
[tex]pK_a=3.46[/tex]
Now we have to calculate the ratio of conjugate base to weak acid in the buffer system
Using Henderson Hesselbach equation :
[tex]pH=pK_a+\log \frac{[\text {conjugate base}]}{[Acid]}[/tex]
Now put all the given values in this expression, we get:
[tex]6.34=3.46+\log \frac{[\text {conjugate base}]}{[Acid]}[/tex]
[tex]\frac{[\text {conjugate base}]}{[Acid]}=758[/tex]
Therefore, the ratio of conjugate base to weak acid in the buffer system is 758: 1
Answer:
A. 1:0.46
Explanation:
I took the test
Which planet do scientists believe prevented the asteroids in the asteroid belt from forming a planet? Earth Jupiter Mars Neptune
Answers
Answer:
Jupiter
Explanation:
Jupiter prevented any planetary bodies from forming in the gap between Mars and Jupiter, thats why asteroids collide today.
sorry if its wrong .
Answer:
Your answer is Jupiter
Explanation:
I TOOK THE TEST AND I LEARNED THIS
In the reaction N2 + 3H2 - 2NH3, how many
grams of H, are needed to produce exactly I mole
of ammonia?
A. lg
B. 2g
C.3g
D.4g
Answers
Answer:
B. 2g
Explanation:
So first you have to find the mole to mole ratio then convert it to grams if that makes sense. So the mole to mole ratio is 2 ammonia to 3 hydrogen gas. So then after you do that conversion you can solve for grams then. Sorry I am not that great at explaining.
I need the correct answer
Answers
Answer:
d.
Explanation:
They can be spread through contaminated surfaces.
Answer:
d
Explanation: pathogens csnnot be spread be sontaminated surfesec
Is amylopectin a straight chain polysaccharide
Answers
Answer:
hey friend, Amylopectin is a branched chain.
Identity the anode and cathode
Answers
Answer:
Pb(s) ---> Pb+2 + 2e- is the anode
Cu+2(aq) + 2e- ---> Cu(s) is the cathode
What does a dissolved salt look like?
A. The salt crystals are surrounded by water molecules.
B. The salt crystals separate into salt molecules in the water.
C. The salt separates into ions that settle to the bottom
D. The ions in the salt are surrounded by water molecules.
Answers
Answer:
I want to say your answer is B)
The answer is D because the ions in the salt will be surrounded by water molecules
Dissolution in water occurs as a result of ionic interactions. This means that the ions (charged atoms) of the solute has to interact with the ions of water for the solute to dissolve. Based on this principle, only polar compounds can dissolve in water.
According to this question, salt is polar because it contains positive (+) and negative (-) ions. Hence, when placed in water, these ions will interact with the ions of water i.e. H+ and OH-. This causes dissolution of salt in water to form salt solution.
Hence, a dissolved salt will look like "ions in the salt are surrounded by water molecules".
Learn more: https://brainly.com/question/8620871
Which formula represents an alkane?
1.
C2H2
2.
C2H4
3.
C3H4
4.
С3Н8
Answers
Answer: Option 4) is correct.
Explanation: It is correct because alkanes have a general formula CnH2n+2. So, all we need to do is substitute and find out how many hydrogens are needed to make the formula an alkane. I am not really good at explaining. I am sorry If I confused you.
Alkanes are the organic compound which has general formula [tex]C_{n}H_{2n +2}[/tex] which satisfies the formula [tex]C_{3}H_{8}[/tex]. Hence [tex]C_{3}H_{8}[/tex] represents an alkane.
AlkaneAlkanes are simplest saturated hydrocarbon. Alkanes are also known as paraffins wax. Alkanes which contains only carbon and hydrogen atoms.
General Formula of AlkaneThe general formula of alkane is [tex]C_{n} H_{2n + 2}[/tex] where n = 1, 2, 3, 4.......
Consider Option 1, [tex]C_{2}H_{2}[/tex] here n = 2 now put the value of n in above formula, we get: [tex]C_{2} H_{2 \times 2 + 2}[/tex] = [tex]C_{2} H_{4 + 2}[/tex] = [tex]C_{2} H_{6}[/tex] , so option 1 does not satisfies the above formula. Hence it is incorrect. Consider Option 2, [tex]C_{2} H_{4}[/tex] here n = 2 now put the value of n in above formula, we get: [tex]C_{2} H_{2 \times 2 + 2} = C_{2} H_{4 + 2} = C_{2} H_{6}[/tex], so option 2 does not satisfies the above formula. Hence it is incorrect. Consider Option 3, [tex]C_{3} H_{4}[/tex] here n = 3 now put the value of n in above formula, we get: [tex]C_{3} H_{2 \times 3 + 2} = C_{3} H_{6 + 2} = C_{3} H_{8}[/tex], so option 3 does not satisfies the above formula. Hence it is incorrect. Consider Option 4, [tex]C_{3} H_{8}[/tex] here n = 3 now put the value of n in above formula, we get: [tex]C_{3} H_{2 \times 3 + 2} = C_{3} H_{6 + 2} = C_{3} H_{8}[/tex], so option 4 satisfies the above formula. Hence it is correct.Thus, from the above conclusion we can see that option 4 [tex]C_{3}H_{8}[/tex] represents an alkane.
Learn more about the alkane here: https://brainly.com/question/16837399
#SPJ2
I need simple answers that a 14-year-old would understand.
What are valence electrons?
What is the difference between the Rutherford and Thompson plum pudding model?
What relative scale for atoms do chemists use? Why do they use this?
Compare and contrast alpha, beta and gamma decay of radionuclides.
Explain why radiation is dangerous for living cells but can be applied to treat people with some forms of cancer.
Explain why oxygen atoms ionise to form the oxide ion with a charge of –2. Identify if oxide is an anion or a cation.
Answers
Answer:
1. The Nummber of electrons present in the outermost shell is called Valence electrons.
2. Thomson model:
Thomson model of atom is the model which states that electrons are embedded in a positively charged solid material which is spherical in shape.
Rutherford model
Rutherford model of atom is the model which explains that there is a nucleus in the center of the atom and electrons are located around the nucleus.
3. Relative atomic mass. Atoms have very little mass , so they're difficult to measure accurately. Instead, chemists use a scale. On this scale the mass of a 12C atom is exactly 12.
4. Difference between Alpha, Beta and Gamma radioactive decay:
Alpha decay forms new element with two fewer protons and two fewer neutrons;
Beta decay forms new element with one more proton and one fewer neutron.
Gamma decay forms NO new element, but now the element has less energy because energy is released as gamma rays.
Gamma radiation has the highest penetration power, Beta decay goes the second, alpha decay the last. However, alpha particles make the most damage even if it has the lowest penetration power among the three.
5. This species has a 2− charge on it, so it is an anion. Anions are named using the stem of the element name with the suffix -ide added. This is the oxide anion.
Hope it helps....Pls Mark as Brainliest!! I Have answered all your question in the Simplest way i could...
Question 3 of 10
5 Points
Match the approximate percentage of the world's water to where it is stored.
Salt water
97 percent
Ice caps and
glaciers
2 percent
Fresh liquid
water
1 percent
Answers
Answer:
salt water 97%
fresh water 1%
frozen 2%
Explanation:
Describe the interactions with the Sun, Earth and Moon system that result in Lunar Cycle / Phases.
Answers
Answer: The tides are another interaction in the sun-earth-moon system. The tides happen because the moon and sun pull on the oceans, causing them to rise and fall each day. The moon has a bigger effect than the sun because it is closer. The angle of the sun as the earth orbits over the course of a year causes the seasons.
Explanation:
Static electricity is
a closed conducting path
when electrons move easily through objects
build up of electrical charges by friction
Answers
The answer is C. build up of electrical charges by friction
Static electricity is a stationary electric charge, typically produced by friction, which causes sparks or crackling or the attraction of dust or hair.
Hope this helps !
EMERGENCY: I WILL FAIL: PLS HELP WILL MARK BRAINLIEST JUST PLS HELP
Answers
Answer:
condensation: moisture builds up on window; dew forms on blades of grass
deposition: snow is made inside a cloud; frst froms on window?
Explanation:
A gas has a volume of 3.00 L at 65.0 C. The same gas has a volume of 11.4 L at 105 C and 1725 mmHg. What was the original pressure of the gas?
Answers
what two factors does elastic potential energy depend upon
Answers
Answer: Spring constant k as well as the distance stretched
Explanation:
Elastic potential energy is Potential energy stored as a result of deformation of an elastic object, such as the stretching of a spring. It is equal to the work done to stretch the spring, which depends upon the spring constant k as well as the distance stretched.
To measure the volume of a washing machine, use:
liters
kiloliters
kilograms
tons
Answers
Answer:
kg
Explanation:
Answer:
You should use tons or kilograms because a washing machine is very heavy.
(Hope this helps)
An insulator,
Keeps electrons inside the nucleus of an atom
Allow electrons to move easily through an object
Is when electrons cannot move through objects easily
Answers
The answer would be C. Is when electrons cannot nice through objects easily.
Any material that keeps energy such as electricity, heat, or cold from easily transferring through is an insulator. Wood, plastic, rubber, and glass are good insulators.
Hope this helps !
CAN SOMEONE HELP ME?!?! IM CONFUSED
Answers
Answer: Solar winds have an influence all the way to about 160 AU from the Sun. About how many kilometers is that?
24,000,000,000 km
48,000,000,000 km
240,000,000,000 km
480,000,000,000 km
Explanation:
Which of the following best summarizes photosynthesis?
A.A chemical reaction involving nitrogen and other atmospheric gases
B.An adaptation of plants that allows them to add nutrients to the soil
C.A process by which plants produce sugar using the energy of sunlight
D.An exchange of gases between animals and the air or water of their habitat
Answers
Answer:
c. a process by which plants produce sugar using energy of sunlight
What are two scientific fields that utilize facial reconstruction?
Answers
Answer:
The facial reconstruction problem arises in various application fields like forensics, anthropology, archeology or history. In forensic science, facial reconstruction comes in the process of identification of deceased people
Explanation:
As the kinetic energy of particles of matter increase, the distance between the particles?
Answers
1-Which reaction shown below is carried out by nitrifying bacteria? I will mark you as brainlist
Choose:
A.{ammonium} to {nitrate}
B.{nitrate} to {nitrogen gas}
C.{nitrogen gas} to{ammonium}
Answers
Answer:
ammonium to nitrate.
Explanation:
they tie em together
a put question in screen shot
Answers
Answer:maybe 2
Explanation:
Answer:
2
Explanation:
A(n)
image cannot be projected and forms where light rays appear to originate.
Answers
Answer:
Eu não sei o que você está dizendo, mas boa sorte
Answer: Virtual
Explanation: A virtual image is an image that can not be formed on a screen. This type of an image is formed when the rays of light appear to meet at a point after reflection or refraction. Virtual images are always erect or upright.
Mosquitoes lays eggs that must hatch in water. The young, called larvae live their first few days in water
Which sentence best describes where you will most likely find mosquitoes and their eggs during the dry season in the Florida Everglades?
A.They will be spread out because water is everywhere.
B.They will be mainly in one area because water is everywhere
C. They will be in fewer areas because water is scarce
D. They will be everywhere because water is scarce.
Answers
Answer:
Explanation:
I believe he is C
NEED ASAP WILL MARK BRAINLIEST ON TIMER
A student determines that she used 0.0665 mol of sodium hydroxide (NaOH) to completely titrate 25.00 mL of sulfuric acid solution (H2SO4). What is the molarity of the sulfuric acid?
0.00131 M
0.00262 M
1.31 M
2.62 M
Answers
hope this helps :)
A student determines that she used 0.0665 mole of sodium hydroxide (NaOH) to completely titrate 25.00 mL of sulfuric acid solution. The molarity of the sulfuric acid is 1.31 M. Therefore, option C is correct.
What is molarity?Number of moles of solute per liter of solution is known as molarity.
The balanced chemical equation for the reaction between sodium hydroxide and sulfuric acid is:
2 NaOH + H₂SO₄ → Na₂SO₄ + 2 H₂O
According to the balanced equation, one mole of sulfuric acid reacts with two moles of sodium hydroxide. Therefore, the number of moles of sulfuric acid in the titrated solution can be calculated as:
moles of H₂SO₄ = (moles of NaOH) / 2
moles of H₂SO₄ = 0.0665 mol / 2
moles of H₂SO₄ = 0.03325 mol
The volume of the sulfuric acid solution used in the titration is 25.00 mL, which is equivalent to 0.02500 L. The molarity (M) of the sulfuric acid can be calculated as:
Molarity of H₂SO₄ = moles of H₂SO₄ / volume of H₂SO₄ solution in liters
= 0.03325 mole / 0.02500 L
= 1.31 M
Thus, option C is correct.
To learn more about the molarity, follow the link:
https://brainly.com/question/8732513
#SPJ3
According to plate tectonics, the continents.
do not move at all
are drifting on a sea of magma
will one day be joined together
"float' on top of the crust
Answers
The answer would be B. are drifting on a sea of magma.
The crust is broken up into giant tectonic plates that ride atop the magma, hot melted-rock material that makes up much of the interior of the Earth. Convection in the molten rock of Earth's mantle drives the movement of the plates. Hotter material rises to the surface, while cooler material sinks toward the core.
Hope this helps !
Answer:
are drifting on a sea of magma.
Explanation: Please mark brainliest.
60.0 g of NH Cl are dissolved in 100 grams of water at 60.0° C. This solution is
A
supersaturated
B
saturated
С
unsaturated
D
none of the above
Answers
Answer:
B) is the correct answer
1. What are the trends for atomic size across a period and down a group for the
main group elements?
2. Draw the following Lewis structures:
a) ammonium ion b) sulfur trioxide c) hydrogen cyanide
3. Using formal charge formula (or electronegativity differences), to determine
the following the best structure, OCS, COS or CSO.
Answers
Answer:
Here's what I get
Explanation:
1. Trends in atomic size
Atomic size tends to decrease from left to right across the Periodic Table.
You are adding one electron at a time. the electrons repel each other, so the size should increase.
You are also adding a proton to the nucleus. The additional attraction should pull the electrons closer to the nucleus.
The nuclear pull wins, so the atoms get smaller from left to right
Atomic size increases from top to bottom of a Group.
You are adding electrons to an extra shell, so the size should increase.
You are also adding protons to the nucleus, so the size should decrease.
The size of the outer shell wins, so the atomic size increases going down a Group.
2. Lewis structures
(a) Ammonium ion
N is the central atom. The N atom has the positive charge.
(b) Sulfur trioxide
S is the central atom, with a double bond to each of the three O atoms.
(c) Hydrogen cyanide
C is the central atom, with a triple bond to the N atom.
3. COS
The best structure is that of O=C=S. It has no formal charges.
The Lewis structures for the other arrangements have formal charges.
The correct answers of this question is given below.
1. The atomic size increases going down a Group.2. (a) Ammonium ion : The N atom has the positive charge. (b) Sulfur trioxide : Having double bond to each of the three O atoms. (c) hydrogen cyanide : Having a triple bond to the N atom.3. COS and it has no formal charges What is Periodic table?A table in which the chemical elements are arranged in order of increasing atomic number.A periodic table has 118 known elements The chemical elements are arranged from left to right and top to bottom in order of increasing atomic number.What is the explanation for this answers?1. Trends in atomic size : Atomic size tends to decrease from left to right across the Periodic Table.You are adding one electron at a time. the electrons repel each other, so the size should increase.You are also adding a proton to the nucleus. The additional attraction should pull the electrons closer to the nucleus.The nuclear pull wins, so the atoms get smaller from left to right.Atomic size increases from top to bottom of a Group.Adding electrons to an extra shell, so the size should increaseAdding protons to the nucleus, so the size should decrease.The size of the outer shell wins, so the atomic size increases going down a Group.2. Lewis structures :
(a) Ammonium ion : N is the central atom. The N atom has the positive charge. (b) Sulfur trioxides : S is the central atom, with a double bond to each of the three O atoms.(c) Hydrogen cyanide: C is the central atom, with a triple bond to the N atom3. COS
The best structure is that of O=C=S. It has no formal charges.The Lewis structures for the other arrangements have formal charges.Learn more about atomic size below,
https://brainly.com/question/25003370
#SPJ2
