WHAT IS THE STOCK NAME FOR FeSO^3

Answers

Answer 1
Feso3 compound name

Iron(II) Sulfite FeSO3 Molecular Weight

Hope this helps!

Have a great day :)

Related Questions

A compound being used in experimental medicine is 78.14% boron (B) and 21.86% hydrogen (H). The empirical formula of the compound will have a boron to hydrogen ratio of

Answers

Explanation:

I did it step by step so It would be easier to understand:)

A child sits on a partially filled balloon and decreases the volume by half. What happens to the pressure inside of the balloon?
It increases

It decreases

It stays the same

Answers

Answers to the whole assignment:

**Check for proof photos at the bottom.**

**Answers are in bold.**

__________________________________________________________

A child sits on a partially filled balloon and decreases the volume by half. What happens to the pressure inside of the balloon?

A. It increases

For the same balloon, how does the density inside the balloon change?

A. increases

A scientist takes a small, partially inflated balloon out of liquid nitrogen (at a very low temperature). As the balloon rests on the table, it begins to grow in size. Which statement(s) best explains why the balloon grows?

B. The air warms and increases particle movement. Increased particle movement leads to increased volume.

C. Increased temperature means increased volume as long as the container is flexible.

__________________________________________________________

Answer the following questions with or without using a calculator.  

A balloon contains 1.00 mol helium gas at STP. What will the volume of the balloon be if the pressure increases to 2.00 atm?  

✔ 11.2 L

A syringe contains 0.10 mol neon gas at STP. What volume does the syringe indicate?  

✔ 2.24 L

A chemist adds 0.10 mol argon gas to the syringe. The pressure and temperature remain constant. What will be the volume on the syringe after the argon is added?  

✔ 4.48 L

__________________________________________________________

Acetylene gas (C2H2) reacts with oxygen gas (O2) to produce carbon dioxide (CO2) and water vapor (H2O). How many liters of C2H2 are required to produce 75.0 L of CO2?

37.5  L

What volume of H2O is produced?

37.5  L

What volume of O2 is required?

93.8  L

When making the calculations, did you need to find the number of moles?  

✔ no

Liquid carbon disulfide (CS2) reacts with 44.8 L O2 gas to produce the gases carbon dioxide (CO2) and sulfur dioxide (SO2).  

What is the mass of carbon dioxide produced?

29.3  g

What is the mass of sulfur dioxide produced?

85.4  g

When making the calculations, did you need to find the number of moles?  

✔ yes

__________________________________________________________

Explanation:

The child is putting pressure on the balloon, and squishing particles together when he/she sits on it, thus increasing pressure. Since particles are being squished closer together, density also increases.

Inflated objects will grow in size when the air inside is hotter. This is because particles move more rapidly. An example would be bike tires being more inflated under hot conditions.

One mole of any gas at standard temperature and pressure (STP) will occupy 22.4 L. If pressure increases, the volume decreases, and vice versa. If moles decreases, so will the volume, and vice versa.

Here are photos of Edge just incase.

The pressure inside of the balloon will Increase. Hence The correct option is (A).

What is Boyle's Law ?

According to this law, the pressure (p) of a given quantity of gas varies inversely with its volume (v) at constant temperature; i.e., in equation form,

pv = k

Where K = constant.

Initial pressure = P₁Initial volume = V₁Final pressure =P₂Final volume = V₂

If we consider that temperature of the gas which filled inside the balloon is constant.

We know that , at constant temperature

P₁V₁ = P₂V₂

Given that

V₂ = V₁ / 2

P₂ = P₁V₁/V₂

P₂ = P₁V₁/V₁/2

P₂ = 2P₁

Therefore, the pressure inside the balloon will become double.Hence The correct option is (A).

Learn more about Gas Law here ;

https://brainly.com/question/12669509

#SPJ2

Valence electrons are important when drawing molecular structures because
a. They are closest to the nucleus of the atom and do not participate in chemical
bonding
b. They are closest to the nucleus of the atom and participate in chemical
bonding
c. They are farthest away from the nucleus of the atom and do not participate in
chemical bonding
d. They are farthest away from the nucleus of the atom and participate in
chemical bonding

Answers

Answer:

d

Explanation:

Valence electrons are in the outermost shell. They form chemical bonds with other elements, not any other electrons. Hope this helps!

existen mas de 10 millones de cmpuestos organicos o inorganicos

Answers

so dfhhdjdjjfjfjjdjdjdj

The electronegativities of carbon and sulfur are almost the same. Both elements form covalently bonded compounds with hydrogen. Why is hydrogen sulfide a polar compound while methane is a nonpolar compound?
a.Sulfur has a stronger attraction for electrons than does carbon
b.A hydrogen sulfide molecule has lone pairs of electrons
c.Sulfur forms ionic bonds with hydrogen while carbon forms covalent bonds
d.Sulfur ions are larger than carbon ions

Answers

Answer:

b. A hydrogen sulfide molecule has lone pairs of electrons

Explanation:

The presence of lone pairs indictates that the molecule will be polar unless its molecular geometry is linear or square planar. In the case of H2S, its shape is bent due to the lone pair and it is a slightly polar molecule.

Which statement about the mass of an electron is correct? A The mass of an electron is equal to the mass of the proton. B The mass of an electron is less than the mass of the proton. с The mass of an electron is equal to the mass of a neutron. D The mass of an electron is greater than the mass of a neutron.​

Answers

Answer:

B

Explanation:

because mass of an electron is 1/2000.

The statement about the mass of an electron which is correct is: B. The mass of an electron is less than the mass of the proton.

An atom refers to a smallest, indivisible unit that comprises the matter that forms all chemical elements. Therefore, atoms are typically considered as the fundamental building blocks of matter which determines the structure of a chemical element.

Basically, an atom consists of three (3) distinct particles and these include;  

Protons. Neutrons. Electrons.

Electrons are the subatomic particles of a chemical element that are negatively charged with a magnitude of -1.

On the other hand, protons can be defined as the subatomic particles of a chemical element that are positively charged.

All of these subatomic particles of a chemical element has a mass. However, the mass of an electron is significantly less than the mass of proton, as a result of its extremely small size.

In conclusion, the mass of an electron is approximately 2000 times smaller than that of a proton and as such contributes almost nothing to the total mass of an atom.

Find more information: https://brainly.com/question/18214726

What is a natural disaster?

Answers

Answer:

Explanation:

A natural disaster is a major adverse event resulting from natural processes of the Earth; examples include floods, hurricanes, tornadoes, volcanic eruptions, earthquakes, tsunamis, storms, and other geologic processes

Answer:

A natural disaster is a natural, major harmful event resulting from natural processes of the Earth such as floods, earthquakes, or hurricanes, tornadoes, volcanic eruptions, tsunamis, storms, and other geologic processes that causes great damage or loss of life.

Detecta cuál de las siguientes fórmulas estructurales no cumple con la tetravalencia del carbono (formar cuatro enlaces)

Answers

El ejercicio completo con las formulas es el siguiente:

cuál de las siguientes fórmulas no cumple con la tetravalencia del átomo de carbono.

a. CH3-CH2-CH2-OH

b. CH3-CH=CH2

c. CH3-CH2=CH2

d. CH3-CH2-CH3

Answer:

La respuesta correcta es la opción C

Explanation:

En la formula C, podemos ver claramente que no se cumple con la tetravalencia del carbono pues al sumar el total de las valencias del carbono nos da 5

CH3 - CH2  =   CH2 = Total de valencias del carbono 5

         1 + 2+  2   =  5

Para que la formula sea correcta debe eliminarse un hidrogeno quedando la formula de la siguiente manera:

                      CH3   -  CH   =   CH2

                                 1 +  1  + 2 =  4

Lime is added to a lake to neutralize the effects of acid rain. The pH value of the
lake water rises from 4 to 7. What is the change in concentration of H+ ions in the
lake water?

Answers

Answer:

The change in concentration of H+ ions is -9.99×10⁻⁵

Explanation:

When pH rises, we talk about neutralization and, there is a decline in proton's concentration.

pH lower than 7 is acid

pH higher than 7 is basic

Protons are neutralized by hydroxides to make water as this:

H₃O⁺   +  OH⁻  ⇄   H₂O

pH = - log [H₃O⁺]

[H₃O⁺] = 10^-pH

In conclussion: [H₃O⁺]₁ = 10⁻⁴ → 1×10⁻⁴

[H₃O⁺]₂ = 10⁻⁷ → 1×10⁻⁷

1×10⁻⁷- 1×10⁻⁴

The change in concentration of H+ ions is -9.99×10⁻⁵

What is the empirical formula of a compound containing 5.03 g carbon, 0.42 g hydrogen, and 44.5 g of chlorine

Answers

Answer:

CHCl₃

Explanation:

We have the following data:

C = 5.03 g

H = 0.42 g

Cl= 44.5 g

First, we divide each mass by the molar mass (MM) of the chemical element to calculate the moles:

MM(C) = 12 g/mol

moles of C = mass/MM(C) = 5.03 g/(12 g/mol) = 0.42 mol C

MM(H) = 1 g/mol

moles of H = mass/MM(H) = 0.42 g/(1 g/mol) = 0.42 mol H

MM(Cl) = 35.4 g/mol

moles of Cl = mass/MM(Cl) = 44.5 g/(35.4 g/mol) = 1.26 mol Cl

Now, we divide the moles by the smallest number of moles (0.42):

0.42 mol C/0.42 = 1 C

0.42 mol H/0.42 = 1 H

1.26 mol Cl/0.42 = 3 Cl

Thus, the C:H:Cl ratio is 1:1:3.

Therefore, the empirical formula is CHCl₃

Answer:

CHCl₃

Explanation:

Describe the formation of calcium chloride (4 marks)

Answers

Answer:

It is an ionic compound that consists of one calcium cation Ca2+ and two chlorine anions. The bivalent calcium metal forms an ionic bond with two chlorine atoms. The formation of cacl2 happens mainly by reacting limestone (CaCo3) with hydrochloric acid (HCl).

identify water resevoirs as usuable or unusuable on their current state

Answers

Oceans :unusable
Rivers :usable
Glaciers :usable
Freshwater: usable
Lakes :usable
Groundwater :usable
Answer: An usable form of water can be defined as the water that can be used for the commercial purposes and drinking purposes.
The water that cannot be used for the commercial purposes and drinking purposes is known as unusable water.
Explanation:
usable: Groundwater, freshwater lakes and rivers.
unusable: Glacier and ocean
The fresh water can be used for drinking purposes and the salty water is suitable for the drinking or commercial purposes

what is neutralisation reaction? why is it named so? give one example.​

Answers

Answer:

In chemistry, neutralization or neutralisation is a chemical reaction in which acid and a base react quantitatively with each other. In a reaction in water, neutralization results in there being no excess of hydrogen or hydroxide ions present in the solution.Neutralization reactions are the reaction between acid and base. The products formed are water and salt. It is called so because the acid and base neutralize each other to form water and salt.Hint: The neutralization reaction is the one in which an acid reacts with an equimolar amount of base to give salt and water. The example could be a reaction between any strong acid and a base. The sodium chloride formed is a result of neutralization reaction.

Trust me mark me as brainliest trust me

6. Which of the following represent kinetic energy? *
(1 Point)
the water behind a dam
O a boulder hug from a net over a pit
a calculator falling to the floor
the string on a bow before being released

Answers

Answer:

weter

Explanation:

Which substance is a binary acid?
hydrochloric acid
phosphoric acid
nitrous acid
sulfuric acid

Answers

Answer:

A) Hyrdrochloric Acid

Explanation:

This is because binary acids are molecular compounds in which hydrogen is combined with a non-metal element. Hydrochloric acid has hydrogen present in it's compound, therefore identifying it as the only binary acid amongst the answer choices.

Yep he or she is right have a nice day

any of ya'll good at chemistry?????​

Answers

Answer:

i good at chemistry

Explanation:

not all but i try

How many atoms are in 9.8 moles of NaCl?

Answers

Answer:

a lot but im pretty sure if u just take avogadros number and multiply it by 9.8 u get the answer

Explanation:

There are 5.89 × 10²⁴ atoms in 9.8 moles on NaCl. Details about number of atoms can be found below.

How to calculate number of atoms?

The number of atoms of a compound can be calculated by multiplying the number of moles of the substance by Avogadro's number.

no of atoms = no of moles × 6.02 × 10²³

According to this question, there are 9.8 moles of NaCl.

no of atoms = 9.8 × 6.02 × 10²³

no of atoms = 5.896 × 10²⁴

Therefore, there are 5.89 × 10²⁴ atoms in 9.8 moles on NaCl.

Learn more about number of atoms at: https://brainly.com/question/8834373

#SPJ2

What is the limiting reactant in a reaction where 10.0 mol of iron is treated with 12.0 mol of bromine? The product that forms is FeBr3. First, write and balance the chemical equation. Next, calculate the moles of FeBr3 that can be made from 10.0 mol of Fe. Then calculate the moles of FeBr3 that can be made from 12.0 mol of bromine. The smaller amount of FeBr3 reveals the limiting reactant.

Answers

Answer: The limiting reagent in the reaction is bromine.

Explanation:

Limiting reagent is defined as the reagent which is completely consumed in the reaction and limits the formation of the product.

Excess reagent is defined as the reagent which is left behind after the completion of the reaction.

Given values:

Moles of iron = 10.0 moles

Moles of bromine = 12.0 moles

The chemical equation for the reaction of iron and bromine follows:

[tex]2Fe+3Br_2\rightarrow 2FeBr_3[/tex]

By the stoichiometry of the reaction:

If 3 moles of bromine reacts with 2 moles of iron

So, 12.0 moles of bromine will react with = [tex]\frac{2}{3}\times 12.0=8moles[/tex] of iron

As the given amount of iron is more than the required amount. Thus, it is present in excess and is considered as an excess reagent.

Hence, bromine is considered a limiting reagent because it limits the formation of the product.

Thus, the limiting reagent in the reaction is bromine.

What is the general form of a synthesis reaction?
O A. AB + CD → AC + BD
B. A + B → AB
O C. AB + C → AC + B
D. AB → A+B
Be

The answer is B

Answers

Answer:

B. A+ B → AB

Explanation:

general form of a synthesis reaction

In a nonpolar covalent bond, electrons are
a. Located in a mobile "sea" shared by many ions
b. Transferred from one atom to another
c. Shared equally between two atoms
d. Shared UNequally between two atoms

Answers

Answer: c. Shared equally between two atoms

Electrons are shared equally because the atoms have the same electronegativity.

Hydrogen and nitrogen react to form ammonia. The chemical equation for this reaction is shown here. 3 H2(g) + N2(g) 2 NH3(g). What amount of hydrogen will produce 44.0 mol of ammonia?
66.0 mol
88.0 mol
132.0 mol
29.3 mol

Answers

Answer:

someone already answered but i think it's 132.0 mol too

How do countries with different currencies trade goods with each other?

A.
They trade actual physical products to avoid confusion over currency differences.
B.
They negotiate to determine which country's currency will be used for the whole exchange.
C.
They create a new shared currency, such as the European Union countries' euro.
D.
They use the exchange rate to convert one country's currency to another's.

Answers

Answer:

D- They use the exchange rate to convert one's Country's currency to another's

Explanation:

will give u brainliest plzz help

Answers

Answer:

4.76 mol / L

Explanation:

The process that takes place is:

Sc₂(C₂O₄)₃ → 2Sc⁺³ + 3C₂O₄⁻²

Assuming we have 1 L of the solution, we would have 2.38 moles of Sc₂(C₂O₄)₃.

We then convert 2.38 moles of Sc₂(C₂O₄)₃ into moles of Sc⁺³, using the stoichiometric coefficients:

2.38 mol Sc₂(C₂O₄)₃ * [tex]\frac{2molSc^{+3}}{1molSc_2(C_2O_4)_3}[/tex] = 4.76 mol Sc⁺³

Finally we calculate the concentration of scandium ion (Sc⁺³) in mol/L:

4.76 mol Sc⁺³ / 1 L = 4.76 mol/L

what's the chemical formula for salt, like is it NaCl??
the salt we eat???????​

Answers

yeah it's NaCl, I just looked it up

Answer:

Yes

Explanation:

NaCl is table salt

Also known as sodium chloride

(04.03 MC)

The table shows the nature of the reactants and products formed in a certain type of chemical reaction.

Nature of Reactants and Products

Reactants

lonic compound + lonic compound

Products

lonic compound + lonic compound

Which of the following is true about this type of chemical reaction?

It is a single replacement reaction, and all four compounds are different.

It is a double replacement reaction, and all four compounds are different.

It is a single replacement reaction, and each compound has the same set of ions.

It is a double replacement reaction, and each compound has the same set of ions.

Answers

Answer: The given type of chemical reaction is a double replacement reaction, and each compound has the same set of ions.

Explanation:

When two different compounds chemically react with each other and their ions get exchanged with each other then it leads to the formation of two new compounds. This type of reaction is called double displacement reaction.

For example, [tex]KBr + AgNO_{3} \rightarrow KNO_{3} + AgBr(\downarrow)[/tex]

Here, both KBr and [tex]AgNO_{3}[/tex] are ionic compounds that leads to the formation of two new ionic compounds which are [tex]KNO_{3}[/tex] and AgBr.

Thus, we can conclude that the given type of chemical reaction is a double replacement reaction, and each compound has the same set of ions.

Compare the following in the three states of matter
a) inter particle space
b)inter particle force of attraction
c)particle motion

Answers

Explanation:

Anything that occupies space and has mass is called matter.

(a) Inter particle space

Solids - Atoms of a solid substance are closely packed with each other due to which there is very less or no inter particle space.Liquids - Atoms of a liquid are little loosely packed due to which there is some inter particle space.Gases - Atoms of a gas are very loosely packed due to which there is large inter particle space.

(b) Inter particle force of attraction

Solids - Atoms of a solid are attached to each other by strong force of attraction.Liquids - Atoms of a liquid have slightly less force of attraction as compared to a solid substance.Gases - Atoms of a gas have Vander waal forces. Hence, there is no inter particle force of attraction between atoms of a gas.

(c) Particle motion

Solids - There is low or negligible particle motion between atoms of a solid.Liquids - There is high particle motion as compared to that present in a solid.Gases - There is very high particle motion as compared to solids and liquids.  

Different between organic fertilizer and inorganic fertilizer ​

Answers

Organic fertilizers are made from mined rock minerals, and natural plant and animal materials. They include ingredients like manure, guano, dried and powdered blood, ground bone, crushed shells, finely pulverized fish, phosphate rock, and wood.

Inorganic fertilizer is synthetic, comprised of minerals and synthetic chemicals. Most of the minerals in inorganic fertilizer are mined from the earth, and balanced inorganic fertilizers are high in all three macronutrients and can contain ammonium sulfate, magnesium sulfate, and potassium chloride.

mark me brainliesttt :))

Organic fertilizer is better for the environment than inorganic

Q.does salt make water boil at a higher temperature?

Answers

Answer:

Yes

Explanation:

The salt increases the boiling point, meaning it make water boil at a higher temperature, and it decreases the specific heat capacity, meaning it will heat up quick.

The table below gives some characteristics of element Y.

Characteristics of element Y Values
Mass number 11
Number of neutrons in a single atom 6
Average atomic mass (grams/mole) 10.81

What is the identity of element Y?

Answers

Answer:

Boron B

Explanation:

According to the periodic table, Boron is the element with atomic mass of approximately 11 [i.e 10.81]

To calculate Neutrons

Neutrons = Mass number - Protons

Number of protons in Boron is same as atomic number which is 5

Thus, N = 11 - 5 = 6

what is an earthquake's epicenter found​

Answers

Answer:

an epicenter is where an earthquake first hit

Answer:

The epicenter

Explanation:

The location below the earth's surface where the earthquake starts is called the hypocenter, and the location directly above it on the surface of the earth is called the epicenter. ... These are smaller earthquakes that occur afterwards in the same place as the mainshock.

Other Questions
Selective observations are chosen because they are not in accord with the preferences or beliefs of the observer.a. Trueb. False A capitalist/free enterprise economy is often characterized by -J)blend of public and private ownership and some government interferenceK)private ownership and limited government interferencepublic ownership and total government interferenceL)Public ownership and limited government interferenceM)trading goods and services for other necessities you need Michael wants to be the most popular fellow on campus. He spends a lot of time planning activities for his buddies, and makes a great effort to get to know the students in all his classes. He spends hours every day on social network sites, trying to get connected to every acquaintance he has had since childhood. Under McClelland's approach to Needs, Michael would be judged as What is the value of this number in decimal form?Three hundred sixty-seven thousandths. A landscaper needs to rent tree-trimming equipment. The graph shows the rental costs for the equipment at two different stores. Choose the ordered pair that best estimates the time and cost at which the two stores charge the same amount. Can you explain it if you could I dont get it Use the Pythagorean theorem and the following diagram to help you find the area and perimeter of the following triangle. Please show your work and steps, so partial credit may be given: If you are just given the two points it is the same formula. Find the midpoint between the points (4,-5) and (-4,5) Find the distance between the two points in simplest radical form. (0,7) and (6,1) 1.2 Give two ways that somebody could get Salmonella food poisoning. an arrow is shot vertically upward from a platform 33ft high at a rate of 174 ft/sec. when will the arrow hit the ground? Based on your understanding of how bond types influence a materials properties, identify each of the following compounds as being made of ionic, covalent, or metallic bonds.ANSWERSteel: MetalicPropane: CovalentCalcium chloride: ionicWater: CovalentEdge 2021 During July at Pool Company, $65,000 of raw materials were requisitioned from the storeroom for use in production. These raw materials included both direct and indirect materials. The indirect materials totaled $4,000. The journal entry to record this requisition would include a debit to Manufacturing Overhead of: Multiple Choice $65,000 $4,000 $0 $61,000 Find an equation of the circle that satisfies the given conditions. (Use the variables x and y.)Center at the origin; passes through (4, 6) Approximately how many sentences should your summary contain Find the second derivative of the function. Loops spaced further apart create a stronger electromagnet. True or False Find the 23rd term of the arithmetic sequence whose common difference is d=4 and whose first term is a^1 = 3. What is a two-column proof An example of computer hardware is ? A. keyboard B. app C. web browser D. operating system