Answer:
[tex] \huge{5.77 \times {10}^{ - 5} m}[/tex]
Explanation:
The wavelength of a wave can be found by using the formula
[tex]\lambda = \frac{c}{f} \\[/tex]
where
c is the speed of the wave
f is the frequency
From the question we have
[tex] \lambda = \frac{3 \times {10}^{8} }{5.2 \times {10}^{ 12} } \\ \\ \\ \\ \large{ = 5.77 \times {10}^{ - 5} m}[/tex]
Hope this helps you
the factor that governs the formula of an ionic compound such as ca3n2 is
Answer:
the charge or oxidation number on the cation and anion.
Explanation:
The factor that governs the formula of an ionic compound such as Ca3N2 is the charge or oxidation number on the cation and anion.
In the example, Ca has a +2 charge, N has a -3 charge
So we need 3 x ( +2) to balance 2 x (-3) and have an electrically neutral compound, so
+6 -6 =0
The factor that governs the formula of an ionic compound such as Ca₃N₂ is charge.
What are ionic compounds?Those compounds in which ionic bond is present between the cation and anion is known as ionic compound.
The most important factor that is essential for the formation of ionic compounds are charge i.e. positive charge and negative charge. In the given compound Ca₃N₂, Calcium (Ca) is present in the +2 oxidation state and Nitrogen is present in the -3 oxidation state. So due to attraction between these charges they make a ionic compound.
Hence charge is important factor.
To know more about ionic compounds, visit the below link:
https://brainly.com/question/11638999
An unknown element sample has 2 isotopes present. The first isotope has a mass of 6.017 amu and is
7.30% abundant. The second has a mass of 7.018 amu and an abundance of 92.7%. Calculate the
average atomic mass of this element
Answer:
Calculating Atomic Mass
Change each percent abundance into decimal form by dividing by 100. Multiply this value by the atomic mass of that isotope. Add together for each isotope to get the average atomic mass.
Explanation:
have a nice day
How are mitosis and meiosis similar? How are they different? Provide 1 way the two processes are the same and 2 ways the 2 processes are different.
Answer:
Similar: both processes of cell division; both processes take place in the nucleus of the cell
Different: mitosis divides into 2, meiosis divides into 4; one is the division of body cells and the other is of specifically sex cells
Explanation:
https://byjus.com/biology/mitosis-and-meiosis/
^ this has more info!
Add 2 teaspoons of baking soda and 2 teaspoons of citric acid to the foam cup. Add the half cup of water to the cup and stir. What is the temperature?
Answer:
Test for carbon dioxide gas.
The reaction between baking soda and citric acid will form sodium ions, citric acid ions, carbon dioxide gas, and water. So all you have to do is add the gas produced (by gas displacement method or something) and test whether the gas is carbon dioxide, with lime water or other methods like hydrogencarbonate indicator. Hope this helped!
Explanation:
Answer:
depends on amount, but the reaction's endothermic (meaning its cold, absorbs heat from surroundings)
I hope it helps.
What mass of water absorbs 6700 J of heat to raise the temperature from 283K to 318K?
Answer:
you did not give the specific heat like formula like it takes 1kj to raise 28grams of water by 10 grams
Explain how magnesium is produced at the negative electrode from molten magnesium chloride
Answer:
being cation it migerates to cathode to be reduced to elemental magnesium
Explanation:
Mg+2. +2e -----------Mg
what word describes when tiny droplets of one liquid are finely dispersed within another liquid?
When tiny droplets of one liquid are finely dispersed within another liquid it is called emulsion.
Emulsion can be defined as the process by which two liquids that are not miscible come together to form a mixture.
The emulsion mixture usually consists of an oil phase and a water phase.
The oil phase appears as droplets when dispersed (mixed with) the water phase.
The uses of emulsion include:
It is used in chemical industries for production.It is used for production of medicine.Digestion of fatty food components in the intestine takes place through the process of emulsion.Learn more here:
https://brainly.com/question/17288119
Calculate the molecular mass of the element
They give:H=1,AI=27,S=32,0=16,Cu=64,P=31,Mg=24,N=14,Na=23
Answer:
Mg (NO3)2
24 + 2×(14+ 3×16)
24+2×(14+48)
24+2×(62)
24+ 124
=148g
Complete the sentence.
Atoms form chemical bonds to satisfy the ______
rule and to become _______
Solid calcium hydroxide is dissolved in water until the pH of the solution is 11.44. The hydroxide ion concentration [OH–] of the solution is:______.A. 1.1 * 10-11 M.B. 3.06 M.C. 8.7 * 10-4 M.D. 1.0 * 10-14 M.E. None of these.
Answer:
c the answer is c that is the answer
2. What mass of water absorbs 6700 J of heat to raise the temperature from 283K to 318K?
Answer:
Q = mcT ...you can either substitute the molar heat capacity of water in the place of c or the specific heat capacity of water.
Explanation:
You have a sealed 2 liter flask that contains nothing but water and carbon dioxide. The flask is half-filled with liquid water, has a temperature of 25°c, and the overall pressure within the flask is 0. 1 atm. How many moles of co2 are in the flask? at this temperature, you may take the kh value for co2 as 0. 033 m / atm.
In this exercise we want to calculate the amount of moles, so this is going to be:
[tex](4.6)(10^{-3}) \ mols \ CO_2[/tex]
Knowing that Henry's law is given by:
[tex]C = KHP[/tex]
Where constants are given by:
C = Concentration KH = Henry's law constant = [tex]0.033 m/atm[/tex]P = partial pressure = [tex]0.07 atm[/tex]Before we can find the concentration of CO2 (and hence the moles of CO2), we first need to find its partial pressure. We look up the vapor pressure of water at 25º and find it to be 0.03 atm. Since the total pressure is equal to 0.1 atm, this mean the partial pressure of:
[tex]CO_2 = 0.1 \ atm - 0.03 \ atm = 0.07 \ atm[/tex]
Now using Henry's law, we find the concentration:
[tex]C = (0.033)*( 0.07) = (2.31)*(10^{-3})[/tex]
Converting to moles of CO2, we have:
[tex](2.31)*(10^{-3})*( 2) = (4.6)*(10^{-3})[/tex]
See more about concentration at https://brainly.com/question/3045247
I NEED THE ANSWER ASAP! Its science btw
Which statement describes conditions in which a mineral can form?
A. Crystals of minerals dissolve in the groundwater in caves.
B. Materials dissolved in seawater crystallize on an ocean bottom.
C. Molten materials are cooled in a netalworks factory
D. Materials are mined from deposits deep underground.
Answer:
b
Explanation:
una pieza de hierro de 25cm3 tiene una masa de 195g cual es su densidad?
Answer:
Pretend you are a TV producer. Think of ideas for new TV shows. Your objective is to create ideas that will be successful, regardless of whether this is quality programming or not. Think of an idea of a copy. Explain the basics of what this show will be like and what show it is copying. Explain why you feel this show will be popular. Think of an idea of a spin-off. Explain the basics of what this show will be like and what show it is spinning off from. Explain why you feel this show will be popular. Think of an idea for a TV show that falls into one of the genre categories listed in the genre chart. Describe the basics of the show and how it falls under the genre’s expectations for characters, plots, and aesthetics. Explain why you feel this show will be popular.
what is the periodic trend for electronegativity
Answer:
mark me brainlest
Explanation:
Electronegativity values generally increase from left to right across the periodic table. Electronegativities generally decrease from top to bottom of a group. The highest electronegativity value is for fluorine.
Answer:
"Electronegativity increases as you move from left to right across a period because the number of charges on the nucleus increases." (sstudy30 on Quizlet)
Explanation:
It explains itself haha!
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
DO the postulates of daltons atomic theory explain the law of consrevetion of mass and thelaw of constant composition
Answer:
see answer
Explanation:
DO the postulates of Daltons atomic theory explain the law of conservation of mass and the law of constant composition.
Dalton's Atomic Theory Postulates1. Everything is composed of atoms, which are the indivisible building blocks of matter and cannot be destroyed or divided any further.
2. All atoms of a single pure element are the same in size and mass
3. Atoms of different elements vary from each other in size and mass.
4. Compounds are produced through different simple whole-number combinations of atoms to produce molecules.
5. Anywhere a compound exists, it will have the same atoms in the same ratio.
6. A chemical reaction between compounds is a re-arrangement of atoms
The law of conservation of mass is shown in 2, 4. and 5.
The law of constant co,position is shown in 2, 4, 5, and 6
What is the agent that causes frost wedging?
Answer:
Freeze wedging is caused by the repeated freeze-thaw. Frost wedging occurs as the result of 9% expansion of water when it is converted to ice. Cracks filled with water are forced further apart when it freezes.
Will the things dissolve by themselves over time?
When a substance dissolves, it looks like it disappears. But in fact it has just mixed with the water to make a transparent (see-through) liquid called a solution. A solution has two parts. The solute is the solid that gets dissolved.
Answer:
it really depends what they are
Explanation:
The burning of fossil fuels contributes to the addition of greenhouse gases to the atmosphere. These gases trap thermal energy in the Earth’s atmosphere. Which of the following would be the most reasonable changes that could result from an increase in the burning of fossil fuels?
Explanation:
The burning of fossil fuels contributes to the addition of greenhouse gases to the atmosphere. These gases trap thermal energy in the Earth's atmosphere.
The materials which contain hydrocarbons which are generated from the remains of decay of plants and animals that are buried underground for many years are called fossil fuels.
What causes by burning fossil fuels?The burning of fossil fuels can affect the environment, climatic conditions and human health. The burning of fossil fuels produces large amount of green house gases like CO₂, CH₄, etc. The increase in the amount of green house gases increases the heat and temperature of the earth's surface which leads to global warming.
The increase of temperature due to global warming can cause rise in the sea level, the glaciers of the earth will melt and coastal areas will be submerged under water due to this.
The burning of fossil fuels also releases toxic gases like SO₂, NO₂ which can cause acid rain and the emission these gases causes air pollution.
Thus the burning of fossil fuels has adverse effects.
To know more about fossil fuels, visit;
https://brainly.com/question/29770775
#SPJ6
Infrared waves travel at a speed of 3.00 x 10^8 m/s. What is the frequency of an infrared wave
that has a vacuum wavelength of 5.5 micrometers?
(1 micrometer= 1x10^-6 m)
O 5.5 X 10^12 Hz
O 5.5 x 10^10 Hz
O 5.5 X 10^11 Hz
O 5.5 X 10^13 Hz
The frequency of the infrared wave at the given speed and wavelength is [tex]5.5 \times 10^{13} \ Hz[/tex].
The given parameters;
speed of the wave, v = 3 x 10⁸ m/swavelength of the wave, λ = 5.5 μmThe frequency of the infrared wave is calculated by using wave equation as shown below;
v = fλ
where;
f is the frequency of the wave[tex]f = \frac{v}{\lambda} \\\\f = \frac{3\times 10^8}{5.5 \times 10^{-6}} \\\\f = 5.5 \times 10^{13} \ Hz[/tex]
Thus, the frequency of the infrared wave at the given speed and wavelength is [tex]5.5 \times 10^{13} \ Hz[/tex].
Learn more here:https://brainly.com/question/18477700
Which type of dry-chemical fixed application method introduces a concentration of agent into a closed area
Actuating mechanism is the dry-chemical fixed application method which
introduces a concentration of agent into a closed area.
The actuating mechanism is commonly used in piping systems and
involves the transport of a control member in automatic or remote control
systems.
The closed system makes manual navigation very difficult which is why the
actuating mechanism in automatic systems are usually used to make it less
tedious and accurate.
Read more on https://brainly.com/question/19914723
what is the difference in chemical energy between organic and inorganic materials?
Answer:
the difference is the presence of a carbon atom
Explanation:
why does helium fusion require higher temperatures
Answer:
Nuclear fusion of hydrogen to form helium occurs naturally in the sun and other stars. It takes place only at extremely high temperatures. That's because a great deal of energy is needed to overcome the force of repulsion between the positively charged nuclei.
Explanation:
hope it helps
22) Calculate the energy of a photon of radiation with a frequency of 9.50 x 1013 Hz.
The energy of the photon with a frequency of 9.50×10¹³ Hz is 6.29×10¯²⁰ J
From the question given above, the following data were obtained:
Frequency (f) = 9.50×10¹³ Hz
Planck's constant (h) = 6.626×10¯³⁴ Js
Energy (E) =?The energy of the photon can be obtained as follow:
E = hf
E = 6.626×10¯³⁴ × 9.50×10¹³
E = 6.29×10¯²⁰ JTherefore, the energy of the photon is 6.29×10¯²⁰ J
Learn more: https://brainly.com/question/7957705
What is q in chemistry.
Answer:
The reaction quotient!
Explanation:
hope this helped :D
mr. garcia uses magnets to hold a poster on a steel filing cabinet because a main component of steel is iron. carbon. plastic. glass.
Mr. garcia uses magnets to hold a poster on a steel filing cabinet because a main component of steel is iron.
What is iron?The chemical element iron has the atomic number 26 and the symbol Fe. It is a metal that is found in group 8 of a periodic table and the first transition series. It makes up a large portion of the planet's outer or inner core and is the most prevalent element on Earth by mass, just ahead of oxygen.
It is the fourth most prevalent element in the crust of the Earth, having been mostly deposited by meteorites inside its metallic state, along with its ores. Iron ores must be processed in kilns or furnaces that may reach 5000 °C (2,730 °F) and higher, which is approximately 500 °C (932 °F) greater than the temperature needed to smelt copper. Mr. garcia uses magnets to hold a poster on a steel filing cabinet because a main component of steel is iron.
Therefore, mr. garcia uses magnets to hold a poster on a steel filing cabinet because a main component of steel is iron.
To know more about iron, here:
https://brainly.com/question/3299672
#SPJ7
Part 1. After learning about the different parts and functions of a meroscope you will now reflect on the importance of ench part citeit significance of each parts by naming it and answering the guide question
Explanation:
after learning more about the position and would
What is carbon? What does it do?
Compared to the energy of an electron in the second shell of an atom of sulfur, the energy of an electron in the
1
first shell is lower
2
first shell is the same.
3
third shell is lower
4
third shell is the same.
Answer:
First shell is lower
Explanation:
The electron has to absorb energy to excite and go to higher energy levels/ shells and should release energy to go to lower energy levels/ shells. This means higher the shell , more energy is required and vice versa
How can you improve your ability to see the indicator color change at the endpoint of a titration?.
Answer: Place a piece of white paper under the analyte flask throughout the titration
Explanation:
The end point of titration can be made easy by the use of indicators. But we have to be keenly observe for each drop from the burette because, the colour change will be sudden for a drop.
What is titration?Titration is an analytical technique used to determine the unknown concentration using a standard reagent of known concentration. The standard reagent of known concentration is called titrant and the one to be determined is called analyte.
Usually analyte is taken in a conical flask and titrant in a burette. The end point of titration is the point at which the reaction is completed in perfect stoichiometry.
In acid-base titrations, the indicators used having different colors in different pH. Hence, the indicator in the analyte will change in color when the acidity of the medium changes. We have to observe keenly for the color change because it happens for any drop.
The adding of titrant from the burette must be dropwise and thus we can get a time to notice the sudden colour change of indicator.
To get more about titration indicators, refer the link below:
https://brainly.com/question/27419598
#SPJ5
