Answer:
i think it is D
Explanation:
i dont know what you are learning but ecological succession is the change of enviroment pretty much.
The reaction of hydrogen with nitrogen to produce ammonia is shown below. If there are 3 moles of nitrogen, how many moles of hydrogen are needed to react completely with the nitrogen?
Answer:
9
Explanation:
I took the same test :)
The stoichiometry is important in chemistry which helps us to use the balanced equation to calculate the amount of reactants and products. Here the moles of hydrogen needed is 9. The correct option is B.
What is stoichiometry?The quantitative study of the reactants and products involved in a chemical reaction is known as the chemical stoichiometry. The stoichiometric coefficients can be fractions including the whole numbers. It helps to establish the mole ratio.
The stoichiometric coefficient is basically the number which is present in front of the atoms, molecules or ions. The stoichiometric calculations are also used in gravimetry and volumetry.
Here the balanced equation for the reaction is:
N₂ + 3H₂ → 2NH₃
Number of moles of H₂ = 3 mol N₂× 3 mol H₂ / 1 mol N₂ = 9 mol H₂
So the number of moles of H₂ is 9.
Thus the correct option is B.
To know more about stoichiometry, visit;
https://brainly.com/question/29775083
#SPJ7
A student is provided with a sample of iron pyrite and a sample of gold. Suggest how the student could distinguish between the two substances
Answer:
Gold and pyrite both have a brilliant metallic luster, but are different tones of yellow. Gold is golden to silvery yellow, whereas pyrite is a pale to medium brassy yellow that sometimes tarnishes.
Explanation:
Which process, in order, would be necessary for this sequence of the rock cycle:
rock → metamorphic rock → igneous rock
Heat and pressure → melting → cooling
Weathering and erosion → compaction → weathering and erosion
Melting → cooling → melting → erosion
Cooling → melting → cooling → weathering and erosion
Answer:
may be the answer is Heat and pressure - melting - cooling
What makes plants the beginning of the food chain?
please answer my question aswell as my last one!
Answer: A
Explanation:
i just took the quiz and it was right!
Which BEST describes how the genetic color variation within the beetle population helps them to survive? A. The color variation helps them to locate food B. The color variation helps them avoid predators C. The color variation helps them compete for resources D. The color variation helps them find mates for reproduction
Answer: B
Explanation: The beetles would be able to use their genetic color to learn how to adapt to the environment and hide from predators.
The statement, that describes the genetic color variation within the beetle population helps them to survive is "the color variation helps them avoid predators."
What is genetic variations?Genetic variations that can exist in a human population include skin color, hair color, dimples, freckles, and blood type. Human skin tone is a classic changeable characteristic that is regarded to be adaptive. Natural selection can result in major changes in the appearance, behavior, or physiology of individuals in a group in a matter of generations.
What is color variation?Meiosis and sexual reproduction combine various alleles in novel ways to generate genetic variety once new alleles emerge. Because of natural selection, green beetles outnumber red beetles. Color diversity can involve camouflage, and beetles could utilize their genetic color to learn how to adapt to their surroundings and hide from predators.
Because this feature has a genetic foundation, the surviving beetles have progeny of the same hue. Brown coloring, which permits the beetle to have more offspring, becomes increasingly prevalent in the population.
Hence the correct option is B.
Learn more about genetic color variation here
https://brainly.com/question/9983861
#SPJ2
Calculate how many methane molecules and how many carbon and hydrogen atoms are there in 25 g of Methane?
From the formula of methane it is clear that one mole of methane has 4hydrogen atoms. So, 37.6×1023 hydrogen atoms are there in 25.0 g of methane. Therefore, 9.4×1023methane molecules and 9.4×1023 hydrogen and 37.6×1023carbon atoms are there in 25.0 g of methane.
mark me brainliestt :))
will give brainliest. In the Solubility lab, sugar was the and water was the solute / solution O solution / solute solute / solvent solvent/solute
Answer:
Sugar was the solute and water was the solvent.
Pure hydrogen (H₂) is a hazardous substance. Thus, safer and more cost effective techniques have been developed to store it as a solid for shipping purposes. One such method is the reaction below, which occurs at 200 °C.
Answer: hello your question has some missing details attached below is the missing details
answer : 25.5% ( B )
Explanation:
Determine percentage yield
molar mass = 35 g/mol
mass of Li₃N(s) = 70 g
product LiH(s) = 8.0 g ( actual yield )
theoretical yield ( LiH ) = 4 * 7.95 = 31.8 g
percentage yield = actual yield * 100 / theoretical yield
= 8 * 100/31.8
= 25.5%
can someone answer this please
Suppose that you want to make 12 g of lithium oxide.
What are the minimum masses of lithium and oxygen you will need?
A. Li= 5.6 g O2= 6.4 g
B. Li 6.5 g O2= 4.6 g
C. Li= 0.6 g O2 46.4 g
D. Li= 15.6 g O2 6.4 g
Answer:
A. Li= 5.6 g O2= 6.4 g
Explanation:
Lithium oxide, Li2O, is an oxide that contains 2 moles of Li and 1 mole of O per mole of oxide. To solve this question we must find the mass of each atom in the molecule as follows:
2Li = 2*6.941g/mol = 13.882g/mol
O = 1*16g/mol = 16g/mol
Molar mass Li2O:
16+13.882 = 29.882g/mol
The mass of lithium is:
12g * (13.882g/mol / 29.882g/mol) = 5.6g Li
And the mass of oxygen:
12g * (16g/mol / 29.882g/mol) = 6.4g O
Right answer is:
A. Li= 5.6 g O2= 6.4 gPorrrrrrffffffaaaaaavvvvvvooooorrrrrrr
Answer:
2.2)solido
2.3)Sólido cristalino
2.4)Sólido amorfo
Please somone help me with a chemistry question brainliest to whoever answers correctly and 20 points
Answer:
Polar
Explanation:
Electronegativity Difference:
0.7 Non-Polar Covalent = 0 0 < Polar Covalent < 2 Ionic (Non-Covalent) ≥ 2
What chemical reaction happens when water breaks down into hydrogen and oxygen
Answer:
bldg licking no-good also
Answer:
Water splitting is the chemical reaction in which water is broken down into oxygen and hydrogen: 2 H2O → 2 H2 + O. Efficient and economical water splitting would be a technological breakthrough that could underpin a hydrogen economy, based on green hydrogen.
An inverse relationship can be represented by what?
Answer:
1/....
Explanation:
If we say acceleration 'a' is inversely proportional to mass 'm', then
a=1/m.
a force of 29 N and acceleration is 0.4 m/s what is the combined mass
Answer:
72.5Kg
Explanation:
that is the procedure above
Given the translation (0,5), translate ordered pairs (9, 0) and (2,-4).
Answer:
(9,5) and (2,1)
Explanation:
1. What is the volume of 4.00g of aluminum at STP?
Answer:
22.4cm³
Explanation:
Avogadro's law shows that Avogadro's volume is 22.4
Fossil fuels are considered to be:
a.
irreplaceable resources
c.
renewable resources
b.
nonrenewable resources
d.
hazardous wastes
Please select the best answer from the choices provided
A
B
C
D
Need help for this answer
Answer:
animals that live in the desert hibernate in winter
am not sure
How or why does lead affect bones and teeth?
Answer:
Lead can harm production of blood cells and the absorption of calcium needed for strong bones and teeth, muscle movements, and the work of nerves and blood vessels. High lead levels can cause brain and kidney damage.
thanks
Once lead enters the body, it is distributed to organs such as the brain, kidneys, liver and bones. The body stores lead in the teeth and bones where it accumulates over time. Lead stored in bone may be remobilized into the blood during pregnancy, thus exposing the fetus.
helo in this please I'm so kunfused
OPTION C is the correct answer.
Question: (02.01 MC) Which state of matter does this image represent?
O Solid
O Liquid
O Gas
O Plasma
Cells can regulate different processes in two ways. They can turn on and off the genes that make enzymes, or they can
A)
increase the activation energy of a reaction.
B)
increase the amount of energy needed to carry out the preferred process.
C)
regulate the enzymes that are already made.
D)
decrease the amount of energy needed to carry out the preferred process.
Answer:
im pretty sure its d
Explanation:
How many moles are in 2.11 x 1014 molecules of LiBr?
Answer: There are [tex]12.71 \times 10^{-9}[/tex] moles present in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr.
Explanation:
According to the mole concept, there are [tex]6.022 \times 10^{23}[/tex] molecules present in 1 mole of a substance.
Hence, moles in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr are calculated as follows.
[tex]Moles = \frac{2.11 \times 10^{14}}{6.022 \times 10^{23}}\\= 12.71 \times 10^{-9}[/tex]
Thus, we can conclude that there are [tex]12.71 \times 10^{-9}[/tex] moles present in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr.
calculate the mass m of 6.50 moles n of kbr m
Answer:
773.51495 grams
Explanation:
1 moles KBr to grams = 119.0023 grams
6.5*119.0023 = 773.51495 grams
A chemist mixed two substances together: a blue powder with no smell and a colorless liquid with a strong smell. Their repeating groups of atoms are shown below on the left. After they were mixed, the chemist analyzed the results and found two substances. One ending substance had the repeating group of atoms shown below on the right. Is the ending substance the same substance as the blue powder? What happened to the atoms of the starting substances when the ending substances formed
Answer:
Vanished completely.
Explanation:
The atoms of starting substances are transformed into the ending substances because the starting substances mixed with each other and turn into new substances. The starting substances i.e. reactants vanished completely when the ending substances means products are formed completely so we can say that the vanishing of ending substance happened when the ending substances are formed.
3 upper M n upper O subscript 2 (s) plus 4 upper A l (s) right arrow 2 upper A l subscript 2 upper O subscript 3 (g) plus 3 upper M n (s). What is the enthalpy of the reaction?
Answer: The enthalpy of the reaction is -1791.31 kJ.
Explanation:
Enthalpy change is the difference between the enthalpies of products and the enthalpies of reactants each multiplied by its stoichiometric coefficients. It is represented by the symbol [tex]Delta H^o_{rxn}[/tex]
[tex]\Delta H^o_{rxn}=\sum (n \times \Delta H^o_{products})-\sum (n \times \Delta H^o_{reactants})[/tex] .....(1)
For the given chemical reaction:
[tex]3MnO_2(s)+4Al(s)\rightarrow 2Al_2O_3(s)+3Mn(s)[/tex]
The expression for the enthalpy change of the reaction will be:
[tex]\Delta H^o_{rxn}=[(2 \times \Delta H^o_f_{(Al_2O_3(s))}) + (3 \times \Delta H^o_f_{(Mn(s))})] - [(3 \times \Delta H^o_f_{(MnO_2(s))}) + (4 \times \Delta H^o_f_{(Al(s))})][/tex]
Taking the standard heat of formation values:
[tex]\Delta H^o_f_{(Al_2O_3(s))}=-1675.7kJ/mol\\\Delta H^o_f_{(Al(s))}=0kJ/mol\\\Delta H^o_f_{(MnO_2(s))}=-520.03kJ/mol\\\Delta H^o_f_{(Mn(s))}=0kJ/mol[/tex]
Plugging values in the above expression:
[tex]\Delta H^o_{rxn}=[(2 \times (-1675.7))+(3 \times 0)] - [(3 \times (-520.03))+(4 \times 0)]\\\\\Delta H^o_{rxn}=-1791.31 kJ[/tex]
Hence, the enthalpy of the reaction is -1791.31 kJ.
Which of these is correct?
Answer:
1.89 nol Cu(NO3)2
Explanation:
if you calculate it it will be 1.89
what is the digiMelt Start Temp and the digiMelt Stop Temp for Formic Acid Acetic Acid Propionic Acid
Explanation:
Melting is defined as the physical process where a solid state of a substance converts into its liquid state. No change of chemical composition takes place, just the physical state of water is changing.
[tex]\text{Solid}\rightleftharpoons \text{Liquid}[/tex]
There are given carboxylic acids. The melting point of these acids increases to its second group member which is ethanoic acid due to prevalent hydrogen bonding. To break this bonding, a high amount of heat needs to be applied.
But as we move forward, the melting point decreases sharply as an increase in the number of carbon atoms decreases the hydrogen bonding.
Melting point of Formic Acid = [tex]8.3^oC[/tex]
Melting point of Acetic Acid = [tex]16.6^oC[/tex]
Melting point of Propionic Acid = [tex]-21^oC[/tex]
How many milliliters of 5.0 M NaOH are needed to exactly neutralize 40. milliliters of 2.0 M HCl?
Answer:
16mL
Explanation:
Using the following formula;
CaVa = CbVb
Where;
Where
Ca = concentration/molarity of acid (M)
Va = volume of acid (mL)
Cb = concentration/molarity of base (M)
Vb = volume of base (mL)
According to the information provided in this question;
Ca (HCl) = 2M
Cb (NaOH) = 5M
Va (HCl) = 40mL
Vb (NaOH) = ?
Using CaVa = CbVb
Vb = CaVa/Cb
Vb = 2 × 40/5
Vb = 80/5
Vb = 16mL