They can do different surgery on people. One is called cataract total and hip replacement surgery which is what can be expected
fill in the blanks Pasaline could ----- and ------- very easily.
Answer:
Hot you too friend's house and be safe and have a great time to take care of the following is not a characteristic it was a circle whose equation oCreate and configure databases in oracle database management system operation administration
Answer:
You typically create a database during Oracle Database software installation. However, you can also create a database after installation.
Reasons to create a database after installation are as follows:
You used Oracle Universal Installer (OUI) to install software only, and did not create a database. You want to create another database (and database instance) on the same host computer as an existing Oracle database. In this case, this chapter assumes that the new database uses the same Oracle home as the existing database. You can also create the database in a new Oracle home by running OUI again. You want to make a copy of (clone) a database.
Select the correct statement(s) regarding DCE and DTE interfaces.
a. DTE and DCE describes the device types (e.g., computers, switches, routers, etc.)
b. distinguishing between DTE and DCE is only required for half-duplex communications
c. DTE and DCE describes the interface and direction of data flow between devices; a single device may have both types of interfaces
d. all statements are correct
Answer:
The correct statement regarding DCE and DTE interfaces is:
c. DTE and DCE describes the interface and direction of data flow between devices; a single device may have both types of interfaces.
Explanation:
DTE stands for Data Terminal Equipment. It is a device that initiates or controls a device's serial connection. The term DCE stands for Data Communications Equipment. It is a device that is used to a modem or other communication interfaces to the DTE device. DTE is a communication receptor, while DCE is a communication broadcaster or distributor.
Write a recursive function that returns 1 if an array of size n is in sorted order and 0 otherwise. Note: If array a stores 3, 6, 7, 7, 12, then isSorted(a, 5) should return 1 . If array b stores 3, 4, 9, 8, then isSorted(b, 4) should return 0.int isSorted(int *array, int n){
Answer:
Here the code is given as follows,
Explanation:
Code:-
#include <stdio.h>
int isSorted(int *array, int n) {
if (n <= 1) {
return 1;
} else {
return isSorted(array, n-1) && array[n-2] <= array[n-1];
}
}
int main() {
int arr1[] = {3, 6, 7, 7, 12}, size1 = 5;
int arr2[] = {3, 4, 9, 8}, size2 = 4;
printf("%d\n", isSorted(arr1, size1));
printf("%d\n", isSorted(arr2, size2));
return 0;
}
Output:-
Computer data that is suitable for sound
Answer:
Answer:In this context sound data is stored and transmitted in an analog form. Since computers represent data in digital form, (as bits and bytes) the
While configuring a wireless access point device, a technician is presented with several security mode options. Which of the following options will provide the most secure access?
Answer:
Bro this is my area the answer is WPA2 and AES
Explanation:
its because AES is a more secure encryption protocol introduced with WPA2. AES isn't some creaky standard developed specifically for Wi-Fi networks, either. It's a serious worldwide encryption standard that's even been adopted by the US government.
There are many possible variations in wireless network design depending on the surroundings.
What is wireless network?Even in a complicated single site, different wireless networks running on the same hardware as part of the broader wireless LAN environment can have different network configuration fundamentals needed for a successful deployment.
At the same time, a number of essential network configuration activities are part of any successful wireless project's typical chores. Let's look at the broad and specific procedures that wireless experts should take while setting up enterprise-grade Wi-Fi networks.
Therefore, There are many possible variations in wireless network design depending on the surroundings.
To learn more about wifi, refer to the link:
https://brainly.com/question/6145118
#SPJ5
Use NAND operator to write; P or Q, and P -Q make an everyday implication sentence using only NAND
Answer:
Hence the answer is given as follows,
Explanation:
By using the NAND operator:-
P or Q and P -Q make an everyday implication sentence using the only NAND is given as,
Carl is planning for a large advertising campaign his company will unveil. He is concerned that his current e-commerce server farm hosted in a public cloud will be overwhelmed and suffer performance problems. He is researching options to dynamically add capacity to the web server farm to handle the anticipated additional workload. You are brought in to consult with him on his options. What can you recommend as possible solutions
Answer:
Cloud Bursting
Explanation:
One of the best possible solutions for this scenario would be Cloud Bursting. This is a solution of using Cloud Server services to handle the server farm workload. The difference is that Cloud Bursting allows the company to use the Cloud services only when their own personal web server farms hit peak demand and can no longer handle the incoming demand. The excess demand is outsourced to the Cloud Server and lets them handle it dynamically without the company having to add any additional hardware to their server farm.
You work in an office that uses Linux and Windows servers. The network uses the IP protocol. You are sitting at a Windows workstation. An application you are using is unable to connect to a Windows server named FileSrv2. Which command can you use to determine whether your computer can still contact the server?
Answer:
PING
Explanation:
To check if there's still connectivity between the computer and server, I would use the ping command.
The ping command is primarily a TCP/IP command. What this command does is to troubleshoot shoot. It troubleshoots connection and reachability. This command also does the work of testing the name of the computer and also its IP address.
Being the Sales Manager of a company you have to hire more salesperson for the company to expand the sales territory. Kindly suggest an effective Recruitment and Selection Process to HR by explaining the all the stages in detail.
Answer:
In order to sales company to expand the sales territory in heeds to target those candidates that have long exposure in sales profile.
Explanation:
Going for a sales interview for the profile of a sales manager in a company. The HR department may require you to answer some questions. Such as what do you like most about sales, how to you motivate your team and how much experience do you have. What are philosophies for making sales Thus first round is of initial screening, reference checking, in-depth interview, employ testing, follow up, and making the selection. This helps to eliminate the undesired candidates.Add (total) all the number in the list (below) using a for loop, but skip over the number at index 3.
numbers = [10,20,30,40,50,60,100]
Answer:
The program in Python is as follows:
numbers = [10,20,30,40,50,60,100]
total = 0
for i in range(len(numbers)):
if i != 3:
total+=numbers[i]
print(total)
Explanation:
This initializes the list
numbers = [10,20,30,40,50,60,100]
Set total to 0
total = 0
This iterates through numbers
for i in range(len(numbers)):
This ensures that the index 3, are not added
if i != 3:
total+=numbers[i]
Print the calculated sum
print(total)
Program to calculate series 10+9+8+...+n" in java with output
Answer:
import java.util.Scanner;
class Main {
public static int calcSeries(int n) {
int sum = 0;
for(int i=10; i>=n; i--) {
sum += i;
}
return sum;
}
public static void main(String[] args) {
Scanner reader = new Scanner(System.in);
int n = 0;
do {
System.out.print("Enter n: ");
n = reader.nextInt();
if (n >= 10) {
System.out.println("Please enter a value lower than 10.");
}
} while (n >= 10);
reader.close();
System.out.printf("sum: %d\n", calcSeries(n));
}
}
Database multiple-choice question don't bs pls
Which of the following is not a common factor for database management system selection?
a. Cost
b. Features and tools
c. Software requirements
d. Hardware requirements
e. All of the above
f. None of the above
(D and F are wrong)
Answer:
f. None of the above
Explanation:
Considering the available options, the right answer is option F "None of the above."
Common factors for database management system selection are the following:
1. Cost: various DBMS vendors have different pricing, hence, interested buyers will consider the price before selections
2. Features and Tools: different types of DBMS have varied features and tools in carrying out the work.
3. Software requirements: there are various software requirements in various DBMS, such as encryption support, scalability, application-level data recovery, etc.
4. Hardware requirement: various DBMS vendors have different hardware requirements to consider, such as sizeable RAM, CPU value, etc.
Hence, in this case, the correct answer is option F.
A recursive method may call other methods, including calling itself. Creating a recursive method can be accomplished in two steps. 1. Write the base case -- Every recursive method must have a case that returns a value or exits from the method without performing a recursive call. That case is called the base case. A programmer may write that part of the method first, and then lest. There may be multiple base cases.Complete the recursive method that returns the exponent of a given number. For e.g. given the number 5 and the exponent 3 (53) the method returns 125. Note: any number to the zero power is 1. Note: Do not code for the example. Your method must work for all given parameters! Use this as your method header: public static int raiseToPower(int base, int exponent)
Answer:
Explanation:
The following code is written in Java. It creates the raiseToPower method that takes in two int parameters. It then uses recursion to calculate the value of the first parameter raised to the power of the second parameter. Three test cases have been provided in the main method of the program and the output can be seen in the attached image below.
class Brainly {
public static void main(String[] args) {
System.out.println("Base 5, Exponent 3: " + raiseToPower(5,3));
System.out.println("Base 2, Exponent 7: " + raiseToPower(2,7));
System.out.println("Base 5, Exponent 9: " + raiseToPower(5,9));
}
public static int raiseToPower(int base, int exponent) {
if (exponent == 0) {
return 1;
} else if (exponent == 1) {
return base;
} else {
return (base * raiseToPower(base, exponent-1));
}
}
}
g 1-4 Which piece of network hardware breaks a network up into separate collision domains within a single broadcast domain
Answer:
A switch
Explanation:
A local area network (LAN) refers to a group of personal computers (PCs) or terminals that are located within the same general area and connected by a common network cable (communication circuit), so that they can exchange information from one node of the network to another. A local area network (LAN) is typically used in small or limited areas such as a set of rooms, a single building, school, hospital, or a set of well-connected buildings. Some of the network devices or equipments used in a local area network (LAN) includes an access point, personal computers, a hub, a router, printer, a switch, etc.
In computer networking, a switch is a network hardware (device) that breaks up a network into separate collision domains within a single broadcast domain. Thus, it's commonly configured with virtual local area network (VLAN) to break up and interconnect multiple networks.
Write a function int checkBalance(char exp[]); that can take an expression as input and check whether the parenthesis used in that expression are valid or invalid. It returns 1 if it is valid, and returns 0 if it is not valid.For example, the following expressions are valid: [ A * {B (C D)}] and [{()()}]The following expressions are invalid: [ A * {B (C D})], [ { ( ] ) ( ) }
Answer:
Explanation:
The following code is written in Java. It uses for loops to loop through the array of characters, and uses IF statements to check if the symbols in the expression are balanced. If so it returns true, otherwise it breaks the function and returns false. Two test cases have been provided in the main method and the output can be seen in the attached image below.
import java.util.ArrayList;
class Brainly {
public static void main(String[] args) {
char[] exp = { '[', 'A', '*', '{', 'B', '(', 'C', 'D', ')', '}', ']'};
char[] exp2 = {'[', 'A', '*', '(', 'C', '}', ']'};
System.out.println(checkBalance(exp));
System.out.println(checkBalance(exp2));
}
public static boolean checkBalance(char exp[]) {
ArrayList<Character> symbols = new ArrayList<>();
for (char x: exp) {
if ((x =='[') || (x == '{') || (x == '(')) {
symbols.add(x);
}
if (x ==']') {
if (symbols.get(symbols.size()-1) == '[') {
symbols.remove(symbols.size()-1);
} else {
return false;
}
}
if (x =='}') {
if (symbols.get(symbols.size()-1) == '{') {
symbols.remove(symbols.size()-1);
} else {
return false;
}
}
if (x ==')') {
if (symbols.get(symbols.size()-1) == '(') {
symbols.remove(symbols.size()-1);
} else {
return false;
}
}
}
return true;
}
}
If we have a book object but we do not give it a "subtitle" property, the following code will return undefined. bar len = book.subtitle.length;
a) true
b) false
Answer:
The answer is "Option a"
Explanation:
In the given question, this statement is true because in this bar len as a reference is declared that creates a book class object that calls the subtitle length method, that's why it is true.
Which statement is NOT a source of threats?
a.
Poor management decisions, accidents and natural disasters.
b.
Data recovery
c.
financial mistakes
d.
loss of customers
Answer:
B
Explanation:
because data is phone business
9.17 LAB: Acronyms An acronym is a word formed from the initial letters of words in a set phrase. Write a program whose input is a phrase and whose output is an acronym of the input. If a word begins with a lower case letter, don't include that letter in the acronym. Assume there will be at least one upper case letter in the input.
Answer:
Hence the code is given as follows,
import java.util.Scanner;
public class LabProgram {
public static String createAcronym(String userPhrase){
String result = "";
String splits[] = userPhrase.split(" ");
for(int i = 0;i<splits.length;i++){
if(splits[i].charAt(0)>='A' && splits[i].charAt(0)<='Z')
result += splits[i].charAt(0);
}
return result;
}
public static void main(String[] args) {
Scanner scan = new Scanner(System.in);
String s = scan.nextLine();
System.out.println(createAcronym(s));
}
}
A computer with a five-stage pipeline deals with conditional branches by stalling for the next three cycles after hitting one. How much does stalling hurt the performance if 20% of all instructions are conditional branches
Answer:
The stalling hurt the performance by 60%.
Explanation:
This can be calculated as follows:
Value of CPI ideally taken by pipeline = 1
From the question, we are given:
Stall frequency = 20%,
Number of frequency = 3
Therefore, we have:
Cycles per instruction (CPI) of the architecture = Value of CPI ideally taken by pipeline + (Stall frequency * Number of frequency) = 1 + (20% * 3) = 1.60
Amount by which the stalling hurt the performance = Cycles per instruction (CPI) of the architecture Value of CPI ideally taken by pipeline = 1 - 0.60 = 0.60, or 60%
Therefore, the stalling hurt the performance by 60%.
CPT (Current Procedural Terminology) codes consist of 3-4 numbers representing a unique service. True False
How would you type the word floor
Answer:
f l o o r
Explanation:
A technician is configuring the static TCP/IP settings on a client computer.
Which of the following configurations are needed for internet communications?
a. DHCP server address
b. DNS server address
c. Default gateway address
d. WINS address
e. APIPA address
f. Alternate IP address
g. IP address including a subnet mask (IPv4) or subnet prefix length (IPv6)
Answer:
The answer is below
Explanation:
Considering the situation and the available options above, the following configurations are needed for internet communications:
B. DNS server address: this matches the domain name to the IP address of a website such that browsers can bring internet resources.
C. Default gateway address: this uses the internet protocol suites and serves as a router to other networks in the absence of other route specifications that could match the destination IP address of a packet.
G. IP address including a subnet mask (IPv4) or subnet prefix length (IPv6): this is used by the internet-connected device to receive messages.
Which information can you apply to every page of your document with the page layout options?
header
conclusion
body
footer
introduction
Answer:
Header and footer
Explanation:
The page layout tab usually found in document programs such as Microsoft Word hold options used to configure several page options which is to be applied to a document. The page layout option gives users options to set page margins, orientation, page numbering, indentation and the other page layout options which is primarily how we would like our document to look like when printed. The page layout option also allows the insertion of a header and footer which is a note which can be written at the topmost and bottomost part of the document. Once, a header and footer option is selected, it is applied to every page of the document being worked on at the moment.
Why is OS important in every data processing system?
Please Answer Fast!
Answer:
Functions of an operating system. An operating system provides three essential capabilities: It offers a UI through a CLI or GUI; it launches and manages the application execution; and it identifies and exposes system hardware resources to those applications -- typically, through a standardized API.
Explanation:
The values of existing data can be modified using the SQL ________ command, which can be used to change several column values at once.
Answer:
The values of existing data can be modified using the SQL ___Update_____ command, which can be used to change several column values at once.
Explanation:
However, if you are interested in modifying some columns, then you must specify the columns of interest by using Update (table name) Set column1, column2, etc., which assigns a new value for the columns that you want to update, with each column value separated by a comma. The SQL (Structured Query Language) Update command is used to update data of an existing database table.
Program is set of instruction written in programming language.
Answer:
Program is set of instruction written in programming language.
program is a collection of instructions that can be executed by a computer to perform a specific task
Resize vector countDown to have newSize elements. Populate the vector with integers {newSize, newSize - 1, ..., 1}. Ex: If newSize = 3, then countDown = {3, 2, 1}, and the sample program outputs:
#include
#include
using namespace std;
int main() {
vector countDown(0);
int newSize = 0;
int i = 0;
newSize = 3;
STUDENT CODE
for (i = 0; i < newSize; ++i) {
cout << countDown.at(i) << " ";
}
cout << "Go!" << endl;
return 0;
}
Answer:
Following are the code to the given question:
#include <iostream>//defining header file
#include <vector>//defining header file
#include <numeric>//defining header file
using namespace std;
int main()//main method
{
vector<int> countDown(0);//defing an integer array variable countDown
int newSize = 0;//defing an integer variable newSize that holds a value 0
int i = 0;//defing an integer variable i that initialize with 0
newSize = 3;// //use newSize to hold a value
countDown.resize(newSize,0);// calling the resize method that accepts two parameters
for (i = 0; i < newSize; ++i)//defining a loop that reverse the integer value
{
countDown[i] = newSize -i;//reverse the value and store it into countDown array
cout << countDown.at(i) << " ";//print reverse array value
}
cout << "Go!" << endl;//print message
return 0;
}
Output:
3 2 1 Go!
Explanation:
In the given code inside the main method an integer array "countDown" and two integer variables "newSize and i" is declared that initializes a value that is 0.
In the next step, an array is used that calls the resize method that accepts two parameters, and define a for a loop.
In this loop, the array is used to reverse the value and print its value with the message.
_________________________ are the countable products resulting from a program, while ________________________ are the changes in clients that are achieved as a result of program participation.
Answer: Outputs; Outcomes.
Explanation:
Program refers to the collection of instructions which the computer can execute in order to perform a certain task.
Outputs are are the countable products resulting from a program, while on the other hand, outcomes are the changes in clients that are achieved as a result of program participation.
Which line could be added to the lesson plan to strengthen the teacher’s point?
Different languages and communication styles might hinder your ability to benefit from global learning.
The digital divide will likely prevent you from having a major impact in the global communications environment.
Language and cultural differences will likely make it too frustrating to have an effective learning experience.
Learning in a global community enables you to expand your horizons and learn new languages.
Answer:
ムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダムダ
Answer:
Learning in a global community enables you to expand your horizons and learn new languages.
Explanation:
Im not sure what the teacher's point is, but the other options seem to hinder students from wanting to learn in a global community. If her goal is to convince students to learn globally then option D is your answer :)
