The floor plan is a drawing that shows the layout of the structural elements that make up the floor system of a building.
What are the contents of floor plan?It typically includes the location of floor joists, rim joists, beams, headers, posts, and stair openings, as well as any other elements that make up the floor system.
The floor plan is an important part of the overall building plan, as it shows the layout of the structural elements that support the weight of the floor and the loads placed on it. It is used by architects, engineers, and contractors to understand the layout and design of the floor system, and to ensure that it is structurally sound and meets the requirements of the building code.
To Know More About floor plan, Check Out
https://brainly.com/question/2486619
#SPJ4
general motors is offering a rebate on pickup trucks purchased this month. this activity involves the _______ ingredient of the marketing mix.
General motors is offering a rebate on pickup trucks purchased this month. this activity involves the pricing ingredient of the marketing mix.
What is marketing mix?As a component of an all-encompassing marketing strategy, a marketing mix includes various areas of emphasis. The phrase frequently alludes to the classification known as the four Ps, which originally stood for product, price, placement, and promotion.
Instead of focusing solely on one message, effective marketing touches on a variety of topics. This makes it easier to connect with more people, and by remembering the four Ps, marketing professionals are better able to keep their attention on the things that really matter.
When launching new products or updating current ones, organisations can make more strategic decisions by concentrating on the marketing mix.
Learn more about marketing mix
https://brainly.com/question/859394
#SPJ4
Assignment 1."Value chain analysis is not a very difficult exercise conceptually"Clarify 2.Supply Chain Management drives supply chain members to have a customer orientation, Explain 3.A typical supply chain may involve a variety of
A typical supply chain may involve a variety of stages such as:
(i) Customers.
(ii) Retailers.
(iii) Wholesalers/Distributors.
What is a supply chain?A supply chain is a group of people and businesses involved in producing and distributing goods to customers.
The supply chain is the network of all the people, businesses, resources, tasks, and technological advancements involved in the production and distribution of a good. An entire supply chain, from the delivery of raw materials from the supplier to the manufacturer to the final delivery to the customer, is included.
Therefore, the typical supply chain may involve a variety of stages such as Customers, Retailers and Wholesalers.
Learn more about supply chain on:
https://brainly.com/question/25160870
#SPJ
The employee time card for John Winter indicates that he spent last week performing routine maintenance on factory machinery. Payments made to Winter for last week's work should be
If his employee time card shows that he spent last week performing normal maintenance on industrial machinery, payments for last week's labour should be charged to the Manufacturing Overhead account.
What is a timecard for employees?A time card, often known as a timesheet, is a tool for keeping track of how much time an employee spends on each task. Utilizing a time card enhances project execution, decision-making, and labour and governmental regulations compliance.
What does a time card serve as?The time an employee starts and stops working is often printed on the card when it is entered into a time clock. The payroll team uses it to determine how many hours an employee will be paid for.
To learn more about payments visit:
brainly.com/question/15136793
#SPJ4
While preparing a software inventory report, a security analyst discovers an unauthorzed program installed on most of the company's servers. The program utilizes the same code signing certificate as an application deployed to only the accounting team. After removing the unauthorced program, which of the following mitigations should the analyst implement to BEST secure the server environment? a. Revoke the code signing certificate used by both prograrns.
b. Block all unapproved file hashes from installation. c. Add the accounting application fite hash to the allowed last. d. Update the code signing certificate for the approved application
The least expensive certificate for servers that only have internal access is one that is self-signed.
What ought to be listed on a software inventory?Detailed information about the installed software, such as the version number and patch level, should be included in inventories at the very least. For each type of device, resource custodians should compile a list of approved software. The only software required to fulfill company needs should be included in authorized software.
What distinguishes the inventories of hardware and software?Information on memory, operating systems, manufacturers, device kinds, peripherals, and other items are included in the hardware inventory details. Information on the software found in the network is provided by the software inventory, which is organized by volume and software vendors.
to know more about software here:
brainly.com/question/985406
#SPJ1
A feeder circuit with no motor lead has a continuous load of 5A and a noncontinuous load of 5A. the feeder overcurrent protective device should be sized at
11.25A
Electric illumination, process pumps and compressors needed to meet the design flow conditions, and either space heating or air conditioning, whichever is larger, are examples of continuous loads.
What A feeder circuit with no motor lead has continuous?An ampere rating for circuit breakers is often noted on the operational handle's end. The breaker can handle this amount of continuous current up to its rating without failing. Generally speaking, the ampere rating of the circuit breaker should match the capacity of the line.
Therefore, the feeder overcurrent protective device should be sized at
11.25A
Learn more about feeder circuit here:
https://brainly.com/question/28314982
#SPJ1
refer to the exhibit. an engineer issued the ping 192.168.3.100 command from r1, and the ping was successful. are there any routes that would not be verified as working by that successful ping?
Yes, the static route for 192.168.2.0 is incorrectly configured.
What is a static route?Static routing is a routing method that requires manual configuration. The majority of network managers follow static routing. In areas with consistent network and environmental characteristics, this routing will be heavily used.
Static routing is fixed and unaffected by network changes, in contrast to dynamic routing. It is used on a router to increase routing effectiveness and to act as a fallback in case other data cannot be shared.
It takes advantage of the routes that connect the two routes, which are not immediately updatable. As a result, whenever the network changes, static routes must be manually reconfigured. Compared to dynamic maps, it takes little bandwidth. It can be applied to situations where network traffic is planned and predictable.
To know more about static route refer:
https://brainly.com/question/6783973
#SPJ4
when recovering cfc, hcfc, or hfc refrigerant into a non-pressurized container from a household refrigerator with an inoperative compressor it is; a. helpful to heat and strike the compressor with a rubber mallet. b. only necessary to recover as much refrigerant as will naturally flow out of the system. c. not necessary to recover since the refrigerant is probably contaminated. d. necessary to chase refrigerant from the oil with pressurized dry nitrogen.
When recovering CFC, HCFC, or HFC refrigerant into a non-pressurized container from a household refrigerator with an inoperative compressor it is helpful to heat and strike the compressor with a rubber mallet.
What is refrigerant compressor?The refrigeration system's beating heart is the compressor. The compressor serves as the system's pump, distributing refrigerant.
The compressor operates as a result of temperature sensors. Recurrent refrigeration cycles are used in refrigeration systems to cool items.
As implied by its name, the compressor takes low pressure gas from the evaporator and compresses it into high pressure gas. The temperature increases when the gas is compressed. The condenser receives the hot refrigerant gas after that.
It is beneficial to heat the compressor and hit it with a rubber mallet when recovering CFC, HCFC, or HFC refrigerant into a non-pressurized container from a home refrigerator with an inoperative compressor.
Thus, the correct option is a.
For more details regarding refrigerant compressor, visit:
https://brainly.com/question/13389697
#SPJ1
You have a dashboard and you want to add a feature so that selecting an element on one of the worksheets on the dashboard causes a change on another worksheet in the same dashboard. What features will do this? (select all that apply) a. Filter Action b. Url Action c. Highlight Action d. Drilldown Action
The feature that will select an element on one of the worksheets is Filter Actions. The correct option is a.
What is a filter action?A filter operation often transmits data from a chosen mark to a different sheet that displays relevant data. Filter actions convey information values from the appropriate source fields as filters to the target sheet invisibly.
The low-pass filter, high-pass filter, band-pass filter, and notch filter are the four main categories of filters. Information is sent across worksheets via filter operations. A filter operation often transmits data from a chosen mark to a different sheet that displays relevant data.
Therefore, the correct option is a, Filter Action.
To learn more about filter action, refer to the link:
https://brainly.com/question/28196961
#SPJ1
f the hubble plots in figures 2-4 represented three universes that are the same size, which hubble plot belongs to the youngest universe? explain your reasoning
Figure 3. The fastest expansion rate means it would have taken the least amount of time to reach that size is hubble plot belongs to the youngest universe.
What can we infer about the cosmos from Hubble's law?One of the most significant quantities in cosmology is the Hubble constant because it informs us how quickly the universe is expanding, which may be used to calculate the age and history of the universe.Utilizing data from instruments that detect the cosmic microwave background, which is thought to represent light released shortly after the Big Bang, is one method. With an error rate of just 0.5 km/s/Mpc, these analyses have determined the Hubble Constant to be 67.4 km/s/Mpc.In essence, Hubble's Law implies that a galaxy recedes from ours quicker the farther away it is.The complete question is page 158 11. If the Hubble plots in figure 2-4 represented three universes that are the same size, which Hubble plot belongs to the youngest universe>
To learn more about Hubble's Law refer to:
https://brainly.com/question/19819028
#SPJ4
Code example 22-1
import java.util.List;
import java.util.ArrayList;
public class ProductsApp {
public static void main(String[] args) {
List products = new ArrayList<>();
products.add(new Product("java", "Murach's Java Programming", 57.50, 5000));
products.add(new Product("cshp", "Murach's C#", 57.50, 2451));
products.add(new Product("mysql", "Murach's MySQL", 57.50, 473));
// call the filterProducts() method
}
public static List filterProducts(List products, TestProduct condition) {
List filteredProducts = new ArrayList<>();
for (Product p : products) {
// test the product and add to the list if it meets the condition
}
return filteredProducts;
}
}
(Refer to code example 22-1) Given the declaration for the TestProduct() interface that follows, which statement would you use to test the condition specified by the lambda expression that's passed to the filterProducts() method?
public interface TestProduct {
boolean test(Product p);
}
The statement that I would use to test the condition specified by the lambda expression that's passed to the filterProducts() method is:
if (condition.test(p)) {...}
What is lambda expression?Java 8 introduced lambda expressions. A lambda expression is a brief segment of code that accepts input parameters and produces a result. Lambda expressions are similar to methods in that they can be used directly within the body of a method and do not require a name.
It offers a concise and clear method for expressing a single method interface. It is very helpful in a library's collection. It aids in data extraction, filtering, and iteration from collections.
An interface that has a functional interface is implemented using the Lambda expression. Lots of code is saved. We don't have to define the method again to provide the implementation when using a lambda expression.
Learn more about lambda expression
https://brainly.com/question/23693370
#SPJ4
Computer Science question
Answer: а в г
Explanation:
Many sites have been penalized for automating the creation of what kinds of links?
O Editorial links
O Manual links
O Manufactured links
O Both A and B
Note that many sites have been penalized for automating the creation of Manual Links. (Option B)
What is a manual link?Simply said, a manual link-building campaign is an activity of deliberately attempting to increase connections to a website.
There are three sorts of linkages in general:
Internal links are hyperlinks that lead from one page on your website to another.External links are hyperlinks that take you away from your website and to another resource.Backlinks are hyperlinks that go from one site to another.Manual links, also known as hyperlinks, are used to link one webpage or document to another. They allow users to easily navigate from one web page or document to another by clicking on a link. Manual links can be created in HTML by using the tag, which stands for "anchor." When a user clicks on a manual link, their web browser will automatically open the linked webpage or document.
Manual links are an essential part of the World Wide Web and are used to connect web pages and documents together in a way that allows users to easily navigate and access information.
Learn more about the links:
https://brainly.com/question/29809523
#SPJ1
T/F when labeling a k-map, it makes no difference if adjacent vertical and horizontal squares differ by more than one variable since the end result will be correct
It doesn't matter if adjacent vertical and horizontal squares differ by more than one variable when labeling a k-map because the outcome will still be accurate. false
All the elements that could change throughout an experiment are considered variables. The variable that you alter and control in your experiment is known as the independent variable. The dependent variable, over which you have no control, is impacted by the responses of the independent variable. Imagine you are doing an experiment to determine how the density of cupcakes is impacted by various sweeteners. Because you get to choose the type of sugar you add, it would be the independent variable. Given that it depends on the type of sugar utilised, density would be the dependent variable. A variable is a quantity that could change depending on the circumstances of an experiment or mathematical problem.
Learn more about variable from
brainly.com/question/82796
#SPJ4
The front rotors are removed from a vehicle. The surface face on both rotors have small cracks and appear to have a blued finish. The brake rotors should be:
The front rotors are removed from a vehicle. The surface face on both rotors have small cracks and appear to have a blued finish. The brake rotors should be: discarded
When should brake rotors be discarded?Only around 1 or 2 millimetres of rotation of a rotor is possible before it is too thin to be used safely and must be discarded and replaced. Repeatedly overheated brake rotors may deform and cause a vibration in the wheel. Your tyres and suspension system will endure substantial wear and tear from this warping.The thickness at which a rotor should be changed is its discard thickness. Discard thickness is often understood to be a parameter that is connected to heat. It is commonly accepted that a rotor cannot disperse heat if it is at or below the discard thickness.Learn more about Brake unit refer to :
https://brainly.com/question/10162789
#SPJ4
he hybridization of the carbon atom labeled x in the molecule below is 10: HH 1 1 II H-N-C-0-0-H HC-H H A) sp B) sp2 C) sp3 D) sp3dE) sp3d2
The hybridization of the carbon atom labeled x in the molecule below is 10: HH 1 1 II H-N-C-0-0-H HC-H H is sp2
What is meant by carbon atom?It is a non-metal and is denoted by the letter C. It has six protons, six neutrons, and six electrons, clearly. Because it can form virtually infinitely strong bonds with other carbon atoms, a carbon atom is regarded as remarkable and unique.
Carbon is a chemical element with the symbol C and atomic number 6 (from the Latin carbo, meaning "coal"). Its tetravalent atom allows for the formation of covalent chemical bonds using four of its electrons. It isn't made of metal. The periodic table's group 14 includes it.
In actuality, proteins, DNA, RNA, carbohydrates, lipids, and many other significant compounds in your body are supported by carbon atoms. These intricate biological entities are categorized as organic molecules and frequently referred to as macromolecules.
To learn more about carbon atom refer to :
https://brainly.com/question/13255170
#SPJ4
A value-returning method must specify this as its return type in the method header.
A) an int
B) a double
C) a boolean
D) any valid data type
By examining the data type, the compiler, or interpreter can determine how the programmer plans to use the data.The majority of programming languages allow the fundamental data types of characters, Booleans, floating-point numbers, and integer numbers (of various sizes). Thus, option D is correct.
What value-returning method type in the header?A method that returns a value to the caller code also performs a task and returns a value.You must write a definition, which consists of a header and a body, in order to construct a method.
Therefore, any valid data type value-returning method must specify this as its return type in the method header.
Learn more about method here:
https://brainly.com/question/13160882
#SPJ1
Linux help
You've experienced some network connectivity issues, and you suspect the issue may be one of the NICs in your computer.
In this lab, your task is to:
Stop the enp2s1 NIC as the first step to isolating the problem.
Verify that enp2s1 is down.
Linux command will be: sudo ifdown enp2s1
Why to use enp2s1?This command will stop the enp2s1 NIC and disable it from sending or receiving data on the network.
To verify that enp2s1 is down, you can use the following command:
ip a
This command will display the status of all network interfaces on the computer. You should see enp2s1 listed as "DOWN" if it has been successfully stopped. You can also use the following command to check the status of a specific interface:
ip a show enp2s1
This command will show the status and other information about the enp2s1 interface. If it is down, the status will be listed as "DOWN".
Alternatively, you can also use the following command to check the status of the enp2s1 interface:
ifconfig enp2s1.
This command will show the status and other information about the enp2s1 interface. If it is down, the status will be listed as "DOWN" and there will be no information about the interface's IP address or other network connectivity details.
To Know More About network connectivity, Check Out
https://brainly.com/question/21442494
#SPJ4
Which expression follows the practice of using parentheses to make the intended order of evaluation explicit?x > y && !a == bGroup of answer choices(x > y) && (!a == b)(x > (y)) && ((!a == b))((x > y) && !a == (b))((x > y)) && ((!a == b))
It is to be noted that the expression that follows the practice of using parentheses to make the intended order of evaluation explicit is; (x > y) && (!a == b) (Option A)
What is an expression in programming?In programming, an expression is a piece of code that represents a value or produces a value. Expressions can be used to perform calculations, assign values to variables, or control the flow of a program.
Expressions can be simple, such as a single number or a string of text, or they can be more complex, involving multiple values, operators, and functions. Expressions can also involve variables, which are used to store values in a program. Expressions can be used in various ways in a program, such as to control the flow of the program using conditional statements, or to perform operations on data.
Learn more about expressions;
https://brainly.com/question/14368396
#SPJ1
while discussing ei service, technician a says the crankshaft sensor may be rotated to adjust the basic ignition timing. technician b says the crankshaft sensor may be moved to adjust the clearance between the pickup coil and reluctor on some ei systems. who is correct?
It is true what technician b said about some ei systems allowing the clearance between the pickup coil and reluctor to be adjusted by moving the crankshaft sensor.
What mechanism is in charge of indicating when the coil is being switched on and off, or most often only on?A device that manages a bank of switches is a relay controller. Logic-controlled magnetic coils are turned on and off using relay controllers.
What occurs when the switching device interrupts the low voltage current flow in the coil primary winding?The magnetic field quickly collapses and a high voltage is induced in the primary winding when the primary current flow is stopped (CEMF Counter electromotive Force).
To know more about technician visit:-
https://brainly.com/question/14290207
#SPJ4
9.6 design the circuit in fig. p9.6 to obtain a dc voltage of 0 v at each of the drains of q1 and q2 when vg1
Integrated circuit transistors down to large electronic systems can all be included in the circuit design process.
What does circuit design entail?The step of the design cycle where the integrated circuit's schematics are produced is frequently referred to as "circuit design" in integrated circuit design automation. Between logic design and physical design, this is typically the next stage.Integrated circuit transistors down to large electronic systems can all be included in the circuit design process. For simple circuits, one individual can frequently complete the design process without the requirement for a planned or systematic design procedure.
The complete question is,
P9.6 will produce a dc voltage of +0.1 V at each of Q 1's and Q 2's drains when V G1 = V G2 = 0 V. Start all of the transistors.
To learn more about Circuit design process refer to:
https://brainly.com/question/15052137
#SPJ4
For the full-bridge inverter, the dc source is 125 V, the load is a series RL connection with R = 10 Ohm and L =20mH, and the switching frequency is 60 Hz. (a) Use the switching scheme bellow and determine the value of a to produce an output with an amplitude of 90V at the fundamental frequency. (b) Determine the THD of the load current.
(a) Using the switching scheme given we have determined the value of ∝ to produce an output with an amplitude of 90V at the fundamental frequency i.e. ∝ = 36.96°
(b) The THD of the load current is = 1.6919
What is amplitude?The maximum displacement or distance made by a point on a vibrating body or wave relative to its equilibrium position is known as the amplitude in physics. It is equivalent to the length of the vibration path divided in half. A pendulum's amplitude is therefore equal to half the distance that the bob travels when swinging from one side to the other. Vibrating sources produce waves, whose amplitude is inversely proportional to the source's amplitude.
The maximum deviation of any point on the string from its position when the string is at rest is used to determine the amplitude of a transverse wave, such as the wave on a plucked string. The maximum displacement of a particle from its equilibrium position is used to determine the amplitude of a longitudinal wave, such as a sound wave.
Learn more about amplitude
https://brainly.com/question/3613222
#SPJ4
Which three forms of energy are used or produced when you run an ordinary lawn mower?
Electrical energy is converted into motion by the motor. Energy used for mechanical motion. The engine converts mechanical energy into chemical energy when a person operates a gas-powered lawn mower.
Why is energy so crucial?Energy is a major factor in our everyday lives as Energy is used to heat and cool the structures that people have built. You need energy to move one fingers, get up from bed, or even walk down the street.
What is the primary energy source?The sun is among the most significant energy sources. The majority of energy on earth comes from the sun, which is where it all began. We receive solar thermal energy.
To know more about energy visit:
https://brainly.com/question/1932868
#SPJ1
Five telemetry signals, each of bandwidth 240 Hz, are to be transmitted simultaneously by binary PCM. The signals must be sampled at least 20% above the Nyquist rate. Framing and synchronizing requires an additional 0.5% extra bits. A PCM encoder is used to convert these signals before they are time-multiplexed into a single data stream. Determine the minimum possible data rate (bits per second) that must be transmitted, and the minimum bandwidth required to transmit the multiplex signal.
To determine the minimum data rate and minimum bandwidth required to transmit the multiplex signal, we need to first determine the minimum sampling rate required to sample each of the telemetry signals. The Nyquist rate is defined as half the bandwidth of the signal, so the Nyquist rate for each telemetry signal is 120 Hz. To sample at least 20% above the Nyquist rate, we need to sample at a rate of at least 120 Hz * 1.2 = 144 Hz.
Since there are 5 telemetry signals, the total number of samples per second is 5 * 144 = 720 samples/s. Since the signals are being encoded using binary PCM, each sample will require 1 bit to represent it. This means that the minimum data rate required to transmit the multiplex signal is 720 samples/s * 1 bit/sample = 720 bits/s.
To determine the minimum bandwidth required to transmit the multiplex signal, we need to consider the bandwidth required for the 5 telemetry signals as well as the additional bandwidth required for framing and synchronization. The total bandwidth required for the telemetry signals is 5 * 240 Hz = 1200 Hz. The additional bandwidth required for framing and synchronization is 1200 Hz * 0.5% = 6 Hz. The total minimum bandwidth required to transmit the multiplex signal is 1200 Hz + 6 Hz = 1206 Hz.
The maximum pace of data flow along a particular path is referred to as bandwidth in computing. Network bandwidth, data bandwidth, and digital bandwidth are three different types of bandwidth.
Contrary to this definition, bandwidth is used to refer to analog signal bandwidth measured in hertz, which is the frequency range between the lowest and highest attainable frequency while meeting a well-defined impairment level in signal power in the fields of signal processing, wireless communications, modem data transmission, digital communications, and electronics.
The actual bit rate that may be obtained is influenced by the channel noise as well as the signal bandwidth.
Learn more about bandwidth, from:
brainly.com/question/28436786
#SPJ2
a gravity fuel system requires that the fuel line be able to carry 150% of the fuel necessary for fuel power operatioing. t/f
Because an injector system is built with gasoline storage above engine and motor system and lines flowing fuel first from container to the engine through gravity, this statement is accurate.
Describe a fuel.When a material comes into touch with atmosphere at a temperature similar to or higher than fuel's ignition temperature, the substance will ignite and release energy. Any flammable objects may be used as fuel. The calorific value of a material is a measure of how much energy it produces.
What materials make up fuel?Fuels called as oil products are created from petroleum and the hydrocarbons found in natural gas. Coal, oil and gas, nor biofuel can also be employed to make petroleum products.
To know more about Fuel visit:
https://brainly.com/question/29220785
#SPJ4
The blade of a framing square is how many inches long
Answer:
The framing square BLADE or body: this is the wider and longer arm of the "L", normally 2" in width and 24" long.
Explanation:
I hope this helps! :) If it does could you please mark me brianliest?
why are stresses or impacts to the side of the shaft of long bone more dangerous than stress applied along the axis of the shaft?
The long axis of the shaft, which is parallel to the osteons and does not bend when forces are applied to either end, is rigid. A fracture might occur as a result of stresses or blows to the shaft's side.
How can a long bone's structure withstand pressure?
Trabeculae, which are thin bone plates aligned with the potential stress imposed, support the long bone by being present in it. The flexible plates spread the pressure throughout the bone to contain it and get thicker toward the core.
What is a bone stress reaction?
A deep bone bruise that develops from trauma or overuse is comparable to a stress reaction. Upon diagnosis, stress injuries can be divided into two categories: early (stress reaction) and late (stress fracture). A stress fracture will form from an untreated stress reaction.
To know more about stress reaction visit;
https://brainly.com/question/10677606
#SPJ4
Number the DOFs and form the stiffness matrix for the show bar system (which has DOFs in the horizontal direction only). Develop the force vector and solve the stiffness equations to find the tip displacement under the given force. Compare your answer to RISA
When a force is applied, stiffness, which is defined as the resistance of an elastic body to deflection or deformation, can be represented as
k = F /[tex]$\delta$[/tex] (1), where k = stiffness (N/m, lb/in).
What is the formula for stiffness?Where F is the load and is the bending deflection, it has a stiffness of
S = F/[tex]$\delta$[/tex]. When a force, F, is applied to an item, its stiffness, k, is calculated as the product of the force's magnitude and the object's deformation,. The slope of the elastic portion of the stress-strain curve for a particular material is taken into consideration when calculating it by dividing the longitudinal stress by the strain. A material's stiffness is primarily categorized by its modulus of elasticity.
A material's stiffness can be summed up by its Young's modulus, also known as elastic modulus. To put it another way, it is how easy it can be bent or stretched. To be more precise, the mathematics and physical values are calculated as follows: Young's modulus equals stress minus strain.
To learn more about stiffness equation refer to :
https://brainly.com/question/14806757
#SPJ4
T/F for a real-world transistor where s12 is non-zero, a simultaneous conjugate match is desired at the input and output of the transistor to achieve maximum linear gain.
For a real-world transistor where s12 is non-zero, a simultaneous conjugate match is desired at the input & output of the transistor to achieve maximum linear gain. (True)
What is a transistor?The amplifier or switch for electrical signals and power is a transistor, a semiconductor device. An essential component of contemporary electronics is the transistor. It's made of semiconductor material and typically has three terminals or more for connecting to an electronic circuit.
The current flowing through a different pair of terminals on a transistor is controlled by the voltage or current applied to one pair of those terminals. A transistor has the capacity to amplify a signal because the controlled (output) power and controlling (input) power can both be higher than one another. Integrated circuits contain many more transistors than those that are packaged individually.
Learn more about transistor
https://brainly.com/question/1426190
#SPJ4
The principal disadvantages(s) with the waterfall development methodology is (are) _____.
a. a long time elapses between completion of the system proposal and the delivery of the system
b. if the team misses important requirements, expensive post-implementation programming may be needed
c. the design must be completely specified on paper before programming begins
d. all of the above
e. none of the above
Note that the principal disadvantage (s) with the waterfall development methodology is (are) "All the Above" (Option D).
What is the Waterfall Development Methodology?The Waterfall Development Methodology is a process for creating software that involves a series of steps that are followed in a specific order. It is called the "waterfall" method because each step flows into the next, like water flowing down a waterfall.
The first step in the Waterfall Development Methodology is to gather requirements, which means figuring out what the software should do. Next, a design is created, which outlines how the software will look and work. Then, the software is actually developed, which means writing the code and creating the software. After that, the software is tested to make sure it works correctly and any problems are fixed. Finally, the software is deployed, which means it is made available for people to use.
Learn more about the Waterfall Methodology:
https://brainly.com/question/28750057
#SPJ1
the density of totally crystalline polyethylene at room temperature is 1.213 g/cm3. also, at room temperature the unit cell for this material is triclinic with the following lattice parameters: a
At room temperature the unit cell for this material is triclinic is 1 unit/cell.
What is the unit cell?In the problem statement we are given the following equation and information:
V = abc * sqrt(1 - cos^2 alpha - cos^2 beta - cos^2 gamma + 2cos alpha * cos beta * cos gamma)
= (0.497)(0.547)(1.729) √1 - cos2 48.4 - cos² 76.7 - cos² 62.5 + 2 cos 48.4 cos 76.7 cos 62.5
= 0.31n * m ^ 3
Next calculate the repeat unit weight for Nylon 6,6
m = 12A_{C} + 22A_{H} + 2A_{O} + 2A_{N}
= 12(12.01) + 22(1) + 2(16) + 2(14.01)
= 226.14g / m * ol
We can now calculate the number of repeat units per a unit cell. However we must convert V from n * m ^ 3 to c * m ^ 3 which results in V = 3.1 * 10 ^ - 22
n = (rho*VN)/m
= (1.213(3.1 * 10 ^ - 22)(6.02 * 10 ^ 23))/226.14
1 unit/cell.
The complete question is The density of totally crystalline nylon 6,6 at room temperature is 1.213g / c * m ^ 3 Also, at room temperature the unit cell for this material is triclinic with lattice parameters:
a = 0.497nm c = 48.4 deg
b = 0.547nm beta = 76.6 deg
c = 1.729nm y = 62.5 deg
If the volume of a triclinic unit cell, V tr i prime is a function of these lattice parameters as
V tri =abc sqrt 1-cos^ 2 a-cos^ 2 beta-cos^ 2 gamma+2 cos a cos beta cos gamma
determine the number of repeat units per unit cell.
Click on the link to access Table 4.3.
Atomic weights for several elements are included in the following table:
Carbon 12.01 g/mol
Chlorine 35.45 g/mol
Fluorine 19.00 g/mol
Hydrogen 1.008 g/mol
Oxygen 16.00 g/mol
Nitrogen 14.01 g/mol
To learn more about unit cell refer to:
https://brainly.com/question/17218051
#SPJ4
