Answer:
Mechanical Sound Waves
A mechanical wave is a wave that depends on the oscillation of matter, meaning that it transfers energy through a medium to propagate. These waves require an initial energy input that then travels through the medium until the initial energy is effectively transferred. Examples of mechanical waves in nature include water waves, sound waves, seismic waves and internal water waves, which occur due to density differences in a body of water. There are three types of mechanical waves: transverse waves, longitudinal waves, and surface waves.
Why is sound a mechanical wave? Sound waves move through air by displacing air particles in a chain reaction. As one particle is displaced from its equilibrium position, it pushes or pulls on neighboring molecules, causing them to be displaced from their equilibrium. As particles continue to displace one another with mechanical vibrations, the disturbance is transported throughout the medium. These particle-to-particle, mechanical vibrations of sound conductance qualify sound waves as mechanical waves. Sound energy, or energy associated with the vibrations created by a vibrating source, requires a medium to travel, which makes sound energy a mechanical wave.
https://www.pasco.com/products/guides/sound-waves
this website tech you about wave, so learn it!!!
Complete and balance the following neutralization reaction, and estimate the
likely pH of the neutralization point. (3 pts)
Ca(OH)2 + HNO3 →
Answer:
we have a base-Ca(OH)2 and an acid - HNO3
→Their chemical reaction gives us water and salt Ca(NO3)+ H20 (neutralisation reaction)
the pH is expected to be acidic ... since nitric acid is a strong acid and calcium hydroxide is a weak base .
Explanation:
meet my pets Frankie and Dakota
At 35.0°C and 3.00 atm pressure, a gas has a volume of 1.40 L. What pressure does the gas have at 0.00°C and a volume of 0.950 L? Which equation should you use? P subscript 2 equals StartFraction P subscript 1 V subscript 1 T subscript 2 over T subscript 1 V subscript 2 EndFraction. P subscript 2 equals StartFraction T subscript 1 V subscript 2 over P subscript 1 V subscript 1 T subscript 2 EndFraction. P subscript 2 StartFraction equals V subscript 1 V subscript 2 over T subscript 1 T subscript 2 EndFraction P subscript 1.
Answer:
a
3.92
Explanation:
Please someone help ! I need it ASAP
Answer:
6.B
7.B
Explanation:
Mark me as brainliest
calculate the mass of 0.5 moles of caco3 in grams with procedure
Answer:
50g
Explanation:
moalr mass of CaCO3= 40g/mol+ 12g/mol+(16g/mol*3)
=52g/mol+48g/mol
=100g/mol
1 mol= 100g
0.5mol=x
by cross multiplication,
0.5*100gmol=x mol
x=50g
Question 25 of 33
Which statement describes a periodie trend of brstionization energy?
A It tends to increase from top to bottom of a group
B. It remains the same within a period
c. It tends to decrease from top to bottom of a group
D. It tends to decrease from left to right across a period
Answer:
A) It tends to increase from top to bottom of a group
Select the correct answer.
Which of the following is true for a heating curve?
Ο Α.
It shows how the pressure of a substance changes when heated.
OB.
It shows how the temperature of a substance changes when heated.
OC.
It shows how the volume of a substance changes when heated.
It shows how the mass of a substance changes when heated.
OD
Reset
Next
Answer:
the answer is b: it shows how temperature of a substance changes when heated
Question 2
5 pts
The air inside a beach ball is at a temperature of 25°C a pressure of 1.0 atm. The ball
contains 0.85 mol of air, what is its volume?
21 L
27 L
0 171
06.11
< Previous
Nest
Answer: The volume of given ball is 21 L.
Explanation:
Given : Pressure = 1.0 atm, no. of moles = 0.85 mol
Temperature = [tex]25^{o}C = (25 + 273) K = 298 K[/tex]
According to the ideal gas equation, formula used is as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into above formula as follows.
[tex]PV = nRT\\1.0 atm \times V = 0.85 mol \times 0.0821 Latm/mol K \times 298 K\\V = 21 L[/tex]
Thus, we can conclude that the volume is 21 L.
What the common uses for Rutherfordium???
Answer:
welcome
Explanation:
Uses of Rutherfordium
Because rutherfordium is made within the lab, there are not very many uses for this element commercially. On the other hand, rutherfordium has been used within the laboratory setting to conduct research. Most elements that are highly radioactive are used for nuclear power and medicinal purposes.
What is the wavelength of spectral line resulted from the electron transition from n=3 to n=2 in a hydrogen atom.
Answer:
[tex]\lambda=6.56x10^{-7}m[/tex]
Explanation:
Hello there!
In this case, it possible to use the Rydberg equation in order to calculate the wavelength for this transition from n=3 to n=2 as shown below:
[tex]\frac{1}{\lambda} =R_H(\frac{1}{n_f^2}-\frac{1}{n_i^2} )[/tex]
Thus, we plug in the corresponding energy levels and the Rydberg constant to obtain:
[tex]\frac{1}{\lambda} =10973731.6m^{-1}(\frac{1}{2^2}-\frac{1}{3^2} )\\\\\frac{1}{\lambda} =1524129.4m^{-1}\\\\\lambda=\frac{1}{1524129.4m^{-1}} \\\\\lambda=6.56x10^{-7}m[/tex]
Best regards!
Who are the scientists that contributed in arranging of the periodic table?
you have a coin with a volume of 10cm3 and a mass of 23g. What is the density of the coin
Answer:
2.3 grams per cubic cm
Explanation:
Density is equal to mass over volume, so
23/10=2.3
Is a hydrogel a smart polymer/stimuli-responsive polmer?
Answer:
Polymer scientists have been trying to mimic this behavior by creating so called smart polymers. ... One of the most important classes of stimuli-responsive polymers used for controlled drug delivery is crosslinked polymer networks, e.g., hydrogels and microgels.
Explanation:
The atomic model that describes an atom as a spherical object containing a certain number of electrons trapped in a mass of positive charge is often called the ___________ model.
help
How much does 3 moles of silica weigh
84.2565
Because
1 silica is equal to 28.0855,
times 3 is 84.2565
which do you think will warm up the plate more quickly?
A. Direct sunlight
B.Indirect sunlight
Answer: B
your welcome Bsbssnsnsmsllqql
Select the correct answer.
Which unit is used for measuring atomic mass?
AMU-aka
Atomic mass unit
Answer:
The unit of Atomic mass is "amu"
Explanation:
Atomic mass unit
Go to the To Scale tab at the bottom of the simulation, and select Path from the central menu on the right. Set up a Planet-Moon simulation. Use the sliders to make both the planet and the moon as massive as possible, and then begin the simulation. What do you notice about the moon’s motion when it is closest to the planet? What about when it is farthest away?
When it could be closest to the Earth and farthest from it, the Moon passes the fastest as well as the slowest.
What is Earth?The only cosmic object known to contain life is Earth, which would be located third from the Sun. Although the Solar System contains enormous amounts of water, only Earth is home to liquid surface water. The oceans cover over 71% of Earth's crust, dwarfing its polar ice, lakes, including rivers.
What is moon?The sole natural satellite of Earth would be the Moon. It makes up the Earth-Moon satellite system with Earth. Its diameter is equivalent to one-fourth of Earth. It should be the biggest satellite of a planet compared to the main, bigger than any existing dwarf planet, as well as the fifth biggest satellite in the Planetary System.
When sliders to make both the planet and the moon as massive as possible, and then begin the simulation. they noticed, it could be closest to the Earth and farthest from it, the Moon passes the fastest as well as the slowest.
To know more about Earth and Moon
https://brainly.com/question/14042561
#SPJ2
If I plant a green bean seed in the desert, will it grow thick, barrel-shaped stems full of water like a cactus? Why or why not?
Answer:
No, although the bean crop can grow perfectly in full sun or a little shade in very warm places. It does not mean that they will adopt the growth patterns of the cactus, especially because this plant needs constant watering (in small quantities), very constant. Beans require good drainage for their growth.
Each vegetation have its own characteristics and the power of adaptation. A green bean cannot survive in a desert like a cactus in desert without water. It can only grow thick in soil with proper water content and nutrients.
What is cactus?Cactus is a type of plant grow in dry regions such as deserts. It can adapt in deserts without water for long time because, the plant have enough water storage in its stem.
Domestic vegetation such as bean, pea, nuts etc ill not grow in dry regions because they cannot adapt in deserts without water. The soil in deserts is dry and have no nutrients.
These conditions prevent the growth of vegetables in desert areas. Moreover, desert have summer season only. The extreme temperature over there will cause the normal plants to diminish.
Therefore, planting green bean in deserts will not make it grow thick like a cactus plant.
To refer more about cactus, refer the link below:
https://brainly.com/question/16636755
#SPJ2
Trihydrogen monophosphide is a covalent molecule that can also act as an acid. What is the correct acid name for trihydrogen monophosphide ?
Answer:
H₃P phosphidic acid
Explanation:
The Trihydrogen monophosphide, as stated in the exercise, can act as an acid. This is pretty similar to the case of hydrogen chloride, which is a gas but it can also be an acid, in this case, chloridic acid.
In the case of trihydrogen phosphide, we can write it molecular formula which is:
H₃P
Now, this is a binary compound because its composed of only two elements, in this case, hydrogen and phosphide. To name binary acid, we need to name the non metal with the sufije idic, and then, the word acid.
Following this simple rule, the trihydrogen phosphide would be, as acid:
H₃P: phosphidic acid
Hope this helps
What happens to the pH of the solution as you add more substance to it?
Answer:
If it's a buffer solution, the pH remains unchanged.
If it's a normal solution, and an acidic substance is added to it, the pH lowers.
If a basic substance is added to it, the pH increases.
What happens when heat is removed from water?
The water particles move farther apart.
The water changes from a liquid to a gas.
The temperature of the water increases.
The kinetic energy of the water particles decreases.
Answer:
D). The kinetic energy of the water particles decreases.
Explanation:
Your welcome!
ANSWER
D
Explanation: Got it correct on edge 2022
Which of the following represents an alpha particle?
O A. je
B. He
O C. Y
O D.B
Answer:
Alpha particle- B. He (Helium 4 atom )
He represents an alpha particle and the correct option is option B.
What is an alpha particle?Alpha particles are alternatively known as Alpha radiation or Alpha rays. It is a positively charged particle emitted from the decay of various radioactive materials.
They are emitted from the nucleus of some radionuclides during a form of radioactive decay, called alpha-decay.
Alpha particle mass is due to the two protons and two neutrons bonding.
An alpha-particle is identical to the nucleus of a normal (atomic mass four) helium atom i.e. a doubly ionised helium atom.
Therefore, He represents an alpha particle and the correct option is option B.
Learn more about Alpha particles, here:
https://brainly.com/question/2288334
#SPJ7
What are some facts about Radon something that is unique and relatively unknown by the general population???? Helpppppp helpppppp
Answer: Radon is radioactive
Explanation: thats all i know
¿
Que es la materia y qué es el volumen que ocupa la materia?
Todo en un estado sólido de materia tiene una forma y una longitud distintas. El volumen de un objeto es la cantidad de espacio que ocupa. Un sólido es un bloque de madera que conserva su forma y volumen cuando se coloca sobre una mesa.
Hope that helps!!!
¡Espero que ayude!
One of the main components of an airbag is the gas that fills it. As part of the design process, you need to determine the exact amount of nitrogen that should be produced. Calculate the number of moles of nitrogen required to fill the airbag. Show your work. Assume that the nitrogen produced by the chemical reaction is at a temperature of 495°C and that nitrogen gas behaves like an ideal gas. Use this fact sheet to review the ideal gas law.
The number of moles of the gas is 0.016 moles
What is the airbag reaction?We know that in the airbag, nitrogen gas is obtained by the decomposition of sodium azide as follows; 2NaN3 -----> 2Na + 3N2
Since it is under ideal conditions;
P = 1 atm
V = 1 L
T = 495°C or 768 K
n = ?
R = 0.082 atm LK-1mol-1
From;
PV= nRT
n = PV/RT
n = 1 atm * 1 L/ 0.082 atm LK-1mol-1 * 768 K
n = 0.016 moles
Learn more about ideal gas law;https://brainly.com/question/13821925
#SPJ1
Review the chart of all the domesticated rabbits. The different types of rabbits are listed by their scientific names. If you were a
rabbit breeder, which rabbits could you breed to produce fertile offspring? Explain.
A)
All of the rabbits listed. They are all rabbits.
B)
None of these rabbits. They are all different species.
C)
Any of the cottontail rabbits They are the same species.
D)
Any of the rabbits on the same branch in the chart because that means
they are closely related.
Answer: None of these rabbits listed. they are all different species
Explanation:
I got it right on usatestprep
What would you predict to be the valence number and oxidation number of tin?
Answer:
Tin exists in two oxidation states, +4 and +2. Elemental tin is readily oxidized to the dipositive ion in acidic solution, but this Sn2+ ion is converted to the Sn4+ ion by many mild oxidizing agents, including elemental oxygen. Oxidation under alkaline conditions normally gives the tetrapositive (Sn4+) state.
The total pressure of all the gases inside a metal container is 9.8 atm. If the partial pressure of the oxygen in the container is 4.2 atm, what is the partial pressure of the rest of the gases in the container other than the oxygen?
5.6 atm is the partial pressure of the rest of the gases in the container other than the oxygen.
What is partial pressure?Each gas in a mixture adds to the overall pressure of a mixture. This portion represents the pressure. The pressure a gas would have if it were in its own volume and at its own temperature is known as the partial pressure. According to Dalton's law, the pressure distribution of an ideal gas mixture is equal to the combined partial pressures of the component gases.
The study of partial pressure is significant in the domains of physics, chemistry, and biology. The partial pressure of oxygen or carbon dioxide in the blood is used to calculate blood levels of each substance. The overall pressure in a container is equal to the sum of the partial pressures. The remaining gases must make up the remaining 5.6 atm if the oxygen partial pressure equals 4.2 atm and the sun reaches 9.8 atm in pressure.
Therefore, 5.6 atm is the partial pressure of the rest of the gases in the container other than the oxygen.
To know more about partial pressure, here:
https://brainly.com/question/13199169
#SPJ3
how has the study of fossil rocks evolved over time? (personal answer)
Answer:
When an organism dies, it is usually destroyed by other forms of life and by weathering processes. On rare occasions some body parts—particularly hard ones such as shells, teeth, or bones—are preserved by being buried in mud or protected in some other way from predators and weather. Eventually, they may become petrified and preserved indefinitely with the rocks in which they are embedded. Methods such as radiometric dating—measuring the amounts of natural radioactive atoms that remain in certain minerals to determine the elapsed time since they were constituted—make it possible to estimate the time period when the rocks, and the fossils associated with them.
A sample of gas as a volume of 425 mL at 25°C at and 760 tour what volume with this gas sample have at STP
Answer:
[tex]\Rightarrow V_2 = 389mL[/tex]
Explanation:
To solve this question, we could use Charles' law since both the number of mole and pressure are constant
At STP pressure P = 760 tor and Temperature = 273K
V1 =425mL, T1 =298K and T2 =273K
and [tex]\frac{V_1}{T_1} =\frac{V_2}{T_2}[/tex]
[tex]\Rightarrow V_2 =T_2\times\frac{V_1}{T_1}[/tex]
[tex]\Rightarrow V_2 =273\times\frac{425}{298}[/tex]
Therefore, [tex]\Rightarrow V_2 = 389mL[/tex]
