Answer:
1.332 L
Explanation:
The reaction that takes place is:
H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂OFirst we calculate the number of NaOH moles, using the given volume and concentration:
350 mL * 3.33 M = 1165.5 mmol NaOHThen we convert NaOH moles into H₂SO₄ moles, using the stoichiometric coefficients:
1165.5 mmol NaOH * [tex]\frac{2mmolH_2SO_4}{1mmolNaOH}[/tex] = 2331 mmol H₂SO₄Finally we calculate the required volume of a 1.75 M solution of H₂SO₄, using the concentration and number of moles:
2331 mmol / 1.75 M = 1332 mLWe can convert mL into L:
1332 mL / 1000 = 1.332 L
8. If 134 L of Nitrogen gas at STP is combined with 99 L of Chlorine gas at STP,
Which is the limiting reactant?
N2 + Cl2 → NCI3
.
Answer:
Cl₂ is the limiting reactant.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
N₂ + 3Cl₂ —> 2NCl₃
From the balanced equation above,
1 L of N₂ reacted with 3 L of Cl₂.
Finally, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
1 L of N₂ reacted with 3 L of Cl₂.
Therefore, 134 L of N₂ will react with = 134 × 3 = 402 L of Cl₂.
From the calculation made above, we can see that a higher volume (i.e 402 L) of Cl₂ than what was given (i.e 99 L) is needed to react completely with 134 L of N₂.
Therefore, Cl₂ is the limiting reactant and N₂ is the excess reactant.
If 50.0 g of silicon dioxide is heated with an excess of carbon, 27.9 g of silicon carbide is produced. What is the percent yield of the reaction
Answer: The percent yield of the reaction is 83.5 %
Explanation:
The given balanced equation is
[tex]SiO_2+3C\rightarrow SiC+2CO[/tex]
[tex]SiO_2[/tex] is the limiting reagent as it limits the formation of product and [tex]C[/tex] is the excess reagent.
According to stoichiometry :
60.08 g of [tex]SiO_2[/tex] produce = 40.11 of [tex]SiC[/tex]
Thus 50.0 of [tex]SiO_2[/tex] will produce=[tex]\frac{40.11}{60.08}\times 50.0=33.4[/tex] of [tex]SiC[/tex]
Experimental yield of SiC = 27.9 g
Percent yield = [tex]\frac{\text {Experimental yield}}{\text {theoretical yield}}\times 100=\frac{27.9g}{33.4g}\times 100=83.5\%[/tex]
Thus percent yield of the reaction is 83.5 %
The percent yield of 83.5 % of 50.0 g of silicon dioxide is heated with an excess of carbon, and 27.9 g of silicon carbide is produced in the reaction.
What is the chemical balance of the equation?
The chemical equations are balanced when the reactants react to form products. The reactants and products react in proper ratios and if they are not in ratio then we balance them by adding the required quantity in the reactants and the products.
The given balanced equation is
[tex]\rm SiO_2+3C---- > SiC+2CO[/tex]
[tex]SiO_2[/tex] is the limiting reagent as it limits the formation of product and is the excess reagent.
According to stoichiometry
60.08 g [tex]SiO_2[/tex] of produce = 40.11 of [tex]SiC[/tex]
Thus 50.0 of [tex]SiO_2[/tex] will produce= [tex]\dfrac{40.11}{60.08} \times 50=33.4\ SiC[/tex]
The experimental yield of SiC = 27.9 g
The percentage yield will be calculated as
[tex]\rm Percentage \ Yield = \frac{Experimental\ yield}{Theoretical \ yield }\times 100[/tex]
[tex]\rm Percentage \ yield =\dfrac{27.9}{33.49} \times 100=83.5[/tex]
Thus the percent yield of 83.5 % of 50.0 g of silicon dioxide is heated with an excess of carbon, and 27.9 g of silicon carbide is produced in the reaction.
To know more about balanced chemical equations follow
https://brainly.com/question/26227625
Arrange the following 0.10 M solutions from most acidic to most basic. Justify your rankings.
KOH
KNO3
KCN
NH4Cl
HCl
Wind energy is a renewable natural resource
True
False
this is true, wind energy is a renewable natural resource c:
Would a salt-cured egg be a physical or chemical change?
For a science experiment, I placed an egg in water that had three tablespoons of salt for one week. After 4 days, the egg cracked. At the end of the week, I took it out and cracked the egg. The egg yolk was now solid. This is also called salt-cured eggs. However, I'm not sure whether this is a physical or chemical change.
Answer:
I believe it is a physical change
Explanation:
The telltale sign of a chemical change is the formation of a new substance. They also usually involve the production of energy (heat, light, sound etc.)
A balloon is filled
with 35.0 L of
helium when the
temperature is
200K. If the tem-
perature rises to
450K, what is the
new volume of the
balloon?
Answer:
78.75L
Explanation:
According to Charle's Law:
V1/T1=V2/T2
35/200=V2/450
V2=(35*450)200
V2=78.75L
I am doing a exam in science need help.
What type of energy comes from the motion of tiny particles of matter?
Answer:
here you are
Explanation:
atomic energy
1. What organ system is responsible for controlling all of the body
functions?
Answer:
The human brain is the body's control center, receiving and sending signals to other organs through the nervous system and through secreted hormones. It is responsible for our thoughts, feelings, memory storage and general perception of the world. The human heart is a responsible for pumping blood throughout our body
Which of the following is an example of synthesis?
A) HgO + Cl2-->HgCl + O2
B) Na + Br2 --> NaBr
C) KClO3 --> KCl + O2
D) Cl2 + NaBr --> NaCl + Br2
Answer:
B
Explanation:
What do particulates in the atmosphere do?
A: They trap heat
B: They help plants to grow better
C: They shield Earth's surface from harmful solar radiation
D: They nucleate water vapor to form clouds.
3. The name of the functional group in the following compound
CH3 - CH2 - CH2 - CH-CH2 - CH3
1
CH3 – CH2
a. Methyl
b. Ethyl
C. Propyl
d. Isopropy!
Answer: a.) Methyl would be the answer.
Explanation:
calculate the value of (Ag+) in a saturated solution of AgCl in distilled water
Answer:
[tex][Ag^+]=1.3x10^{-5}M[/tex]
Explanation:
Hello there!
In this case, according to the dissociation of silver chloride in aqueous solution, we can write:
[tex]AgCl(s)\rightarrow Ag^+(aq)+Cl^-(aq)[/tex]
Whereas the equilibrium expression is:
[tex]Ksp=[Ag^+][Cl^-][/tex]
And the solubility product constant is 1.7 x10⁻¹⁰; thus, by inserting x as the concentration of both silver and chloride ions as they are the same at equilibrium, we obtain:
[tex]1.7x10^{-10}=x^2\\\\x=\sqrt{1.7x10^{-10}} \\x=1.3x10^{-5}M[/tex]
Which is also equal to the concentration silver ions at equilibrium in a saturated solution because we considered the Ksp.
[tex][Ag^+]=1.3x10^{-5}M[/tex]
Best regards!
Several elements must be transmuted to sea the real implications of this event
a.surpassed
b.estimated
c.changed
d.summed
thanks guys :)
How do you balance this:
Br2 + H2O + SO2 = HBr + H2SO4
Answer:
Br2+ 2H2O + SO2= 2HBr + H2SO4
Let's Compare the left side of the equation to the right side of the equation.
Left: Br= 2, H= 2, S= 1, O = 1+2
Right: Br=1, H= 1+2, S=1, O= 4
We can see that only S is balanced and not the other 3 elements.
I'll try to make each element balance.
For Br; I'll multiply by 2 on the left to make it equal to the right.
For H; Since the 2 for Br on the right affected also H, that H ( for HBr) Already has a 2, but then it adds with the other H2( for H2SO4) to give a total of 4 H on the right side. But then there's only 2 H on the left. so we multiply that 2 by a 2 ( which is written infront of the H2O to give a total of 4 H on the left side.
For O; Because of the 2 infront of the H2O, it affects the O in H2O..so now we have 2 O plus the 2 O ( in SO2) to give a total of 4 O which is equal to the right side.
The overall redox equation for the voltaic cell can be written as ^^^. What is being reduced in this forward reaction?
Answer:
Cu⁺² is being reduced in that reaction.
Explanation:
Zn(s) + Cu⁺²(aq) → Zn⁺²(aq) + Cu(s)When a substance is reduced, its oxidation number is reduced -changing to a lower value than original-.
Cu⁺² turned into Cu. Meaning that the oxidation number changed from +2 to 0.
Thus, Cu⁺² is being reduced in that reaction.
Which of the following molecules are Polar? Select all that apply.
Group of answer choices
A.CH3Cl
B.HF
C.O2
D.PF5
E.HCN
F.SeBr6
G.H2S
You are given three liquids, pentane (C5H12), water (H2O), and tetrachloromethane (CCl4), and are told to make solutions.
a. Predict whether you will be able to make a solution with pentane and tetrachloromethane
b. Predict whether you will be able to make a solution with pentane and water, and give your reasoning.
Answer:
A. predict whether you will be able to make a solution with pentane and tetrachloromethane
Explanation:
Sana nakatulong
A 0.10M NH3 solution is 1.3% ionized, calculate the hydrogen ion concentration
Answer:NH3 + H2O <==> NH4+ + OH-
0.10 x 0.013 = 0.0013 M (this is the hydroxide concentration)
Kw = [H+] [H-]
1.00 x 10^-14 = (x) (0.0013)
x = 7.7 x 10^-12 M
Explanation:
what are the reasons that you cannot see many stars in the city nights?
Answer:
Because of the artificial lights influencing the dark night, turning it into a grey.
Pls someone help me with this question pls
Answer:
So confusing but I'll try
arrange the following group of atoms in order of increasing atomic size:B,Al,Ga
Answer:
Al,Ga,B
Explanation:
Now since i helped you can you help me with this plz
Matteo took 5 math quizzes. The mean of the 5 quizzes was 8.2. Here are four of his quiz scores 7, 7, 8, 10. What is the 5th quiz score? Show work.
Boron ( B )
Aluminium ( Al )
Gallium ( Ga )
Can you watch the video and help me fill in the blanks ? Thank you
how to calculate relative abundance of copper isotopes
Answer: Atomic mass (Cu) = (x)(63.0 amu) + (1 – x)(65.0 amu) = 63.5 amu 63.0x + 65 – 65.0x = 63.5 –2x = –1.5 x = 0.75 The percent abundance of each isotope is 75.0 % (Cu-63) and 25.0 % (Cu-65).
Explanation: As you know, the average atomic mass of an element is determined by taking the weighted average of the atomic masses of its naturally occurring isotopes.
Simply put, an element's naturally occurring isotopes will contribute to the average atomic mass of the element proportionally to their abundance.
2. Calculate the concentration (in molarity) of a NaOH solution if 25.0 mL of the solution are needed to neutralize 17.4 mL of a 0.312 M HCl solution.
Answer:
0.217 M NaOH
Explanation:
M1V1 = M2V2
M1 = 0.312 M HCl
V1 = 17.4 mL HCl
M2 = ?
V2 = 25.0 mL NaOH
Solve for M2 --> M2 = M1V1/V2
M2 = (0.312 M)(17.4 mL) / (25.0 mL) = 0.217 M NaOH
which is the most fluorescent molecule?
what is an example of an electrolyte solution?
Answer:
nacl with water
they are capable of conducting electricity
Pleaseee helpppp!!!!!!!!
Answer:
a covalent would be the two that are nonmetals
What type of Weathering is important to sand storms on Mars? Physical or
Chemical?
Why would 3D printing be important on Mars and why would you use material from the surface of Mars.
We could "print" things that we need on Mars.
We could print things that we need on Mars and use material that is already on the planet
It would be so cool
The cost would be less expensive.
Answer:
1. Physical Weathering
2. Option B
Explanation:
1. Physical weathering
On Mars, there are two types of weathering agents a) wind and b) acid fog. Thus, they will carry out only physical weathering
2. Option B
3D can be used to produce things that are required on the Mars and also the locally available raw material can be used for printing thereby saving the cost.
At some temperature for the equilibrium PX3(g) + X2(g) # PX5(g) the equilibrium constant is 0.74. At the same temperature the equilibrium constant for PX5(9) + PX3(g) X2(g) is
Answer: The equilibrium constant for [tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex] is 1.35
Explanation:
Equilibrium constant is defined as the ratio of concentration of products to the concentration of reactants each raised to the power their stoichiometric ratios. It is expressed as [tex]K_c[/tex]
For the given chemical reaction:
[tex]PX_3(g)+X_2(g)\rightarrow PX_5(g)[/tex]
The expression for [tex]K_c[/tex] is written as:
[tex]K_c=\frac{[PX_5]^1}{[PX_3]^1[X_2]^1}[/tex]
[tex]0.74=\frac{[PX_5]^1}{[PX_3]^1[X_2]^1}[/tex]
For the reverse chemical reaction:
[tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex]
The expression for [tex]K_c'[/tex] is written as:
[tex]K_c'=\frac{[PX_3]^1[X_2]^1}{[PX_5]^1}[/tex]
[tex]K_c'=\frac{1}{K_c}=\frac{1}{0.74}=1.35[/tex]
The equilibrium constant for [tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex] is 1.35
when 70.0 grams of mno2 reacted with 128.0 grams of hcl, the reaction resulted in a 62.7% yield of chlorine gas. what is the actual yield of chlorine gas in grams? Mno2 + HCI —> MnCl2 + h2o + cl2
Answer:
35.8g of Cl₂ is the yield
Explanation:
Based on the reaction:
MnO₂ + 4HCl → MnCl₂ + 2H₂O + Cl₂
1 mole of MnO₂ and 4 moles of HCl react producing 1 mole of Cl₂
To solve this question we must find limiting reactant. with limiting reactant we can find the theoretical yield of Cl₂. As the actual yield is the 62.7% we can find actual yield of Cl₂ in grams:
Moles MnO₂ -Molar mass: 86.9368g/mol-:
70.0g * (1mol / 86.9368g) = 0.805 moles
Moles HCl -Molar mass: 36.46g/mol-:
128.0g * (1mol / 36.46g) = 3.51 moles
For a complete reaction of 3.51 moles of HCl are required:
3.51 moles HCl * (1mol MnO₂ / 4mol HCl) = 0.878 moles MnO₂.
As there are just 0.805 moles of MnO₂, MnO₂ is limiting reactant.
1 mole of MnO₂ produce 1 mole of Cl₂. The theoretical moles of Cl₂ produced are 0.805 moles.
As the yield is of 62.7%, the yield of Cl₂ is:
0.805 moles * (62.7 / 100) = 0.505 moles Cl₂. In grams:
0.505 moles Cl₂ * (70.906g / mol) =
35.8g of Cl₂ is the yield