[tex]\\ \large\sf\longmapsto KNO_3[/tex]
[tex]\\ \large\sf\longmapsto 39u+14u +3(16u)[/tex]
[tex]\\ \large\sf\longmapsto 53u+48u[/tex]
[tex]\\ \large\sf\longmapsto 101u[/tex]
[tex]\\ \large\sf\longmapsto 101g/mol[/tex]
Given mass=84.5g[tex]\boxed{\sf No\:of\:moles=\dfrac{Given\:mass}{Molar\:Mass}}[/tex]
[tex]\\ \large\sf\longmapsto No\:of\:moles=\dfrac{84.5}{101}[/tex]
[tex]\\ \large\sf\longmapsto No\:of\:moles=0.8mol[/tex]
Now
[tex]\boxed{\sf Molarity=\dfrac{Moles\:of\:solute}{Volume\:of\:solution\;in\;L}}[/tex]
[tex]\\ \large\sf\longmapsto Molarity=\dfrac{0.8}{0.750L}[/tex]
[tex]\\ \large\sf\longmapsto Molarity=1.06M[/tex]
The diagram above shows the hydrides of groups 14, 15, 16, and 17 elements. Why does H20, HF, and NH3 have much higher boiling points than the rest of the molecules in their groups?
Answer:
Hydrogen Bonding
Explanation:
Hydrogen Bonding occurs when a hydrogen atom is bonded to N, O, and F atoms.
The molecules H₂O, HF, and NH₃ all experience hydrogen bonding, which is a relatively strong IMF, causing the molecules to have stronger attraction to each other. Having a stronger attraction between molecules results in more energy required to separate them, thus these molecules will have a higher boiling point than the rest of the molecules in their group.
Name the following molecule
Answer:
It is a Biological Molecule
When the plutonium bomb was tested in New Mexico in 1945, approximately 1 gram of matter was converted into energy. Suppose another bomb is tested, and 8.7 grams of matter are converted into energy. How many joules of energy are released by the explosion
Answer:
See explanation
Explanation:
Given Einstein's theory of relativity, we have that;
E= mc^2
m= mass of the substance
c= speed of light
For one gram of the substance,
E= 1 ×10^-3 × (3 × 10^8)^2
E = 9 × 10^13 J
For 8.7 g of matter;
E = 8.7 × 10^-3× (3 × 10^8)
E= 7.83 ×10^ 14 J
Which of the following best describes the role of the Supreme Court in protecting Americans' civil rights and liberties?
OA. It creates laws and regulations designed to protect the rights of Americans.
ОВ.
It punishes people and institutions that violate civil rights and liberties.
OC.
It decides if any constitutional rights were violated in a given situation.
OD.
It determines how to balance the competing rights of different individuals.
Reset
Next
Answer:
OB
Explanation:
it protects civil rights and liberties by striking down laws that violate the Constitution.
Why did Rutherford choose alpha particles in his experiment?
Enzyme catalyzing breakdown of atp to adp
Answer:
ATP hydrolase
Explanation:
Enzymes are biological catalysts which perform diverse functions in the body. Enzymes are specific in their mode of action because an enzyme fits into its substrate as a key fits into a lock.
The particular enzyme that catalyzes the breakdown of ATP to ADP is ATP hydrolase. The phosphate released by the action of this enzyme is used in the phosphorylation of other compounds thereby making them more reactive.
Select True or False: All intermolecular forces must be overcome in order for a substance to undergo a phase change from a liquid to a gas
Answer:
True
Explanation:
In order for a liquid to boil it must undergo transformation in its structural composition that are arranged by intermolecular. Such as changes will need more energy to overcome and changes in phases form solid to liquid to gas.وزن الملي مكافئ لحامض الخليك
Answer:
hshssytdtctdyeheb
Explanation:
yye6d66d6d6dududyydydydyehwj2
A solution is made by dissolving 20 ml of acetic acid in 180ml of water. Calculate its volume concentration
Answer:
water is 9/10
chemical would be 1/10
Explanation:
180/200 would be water concentration in solution
and 20/200 would be chemical solution concentration in solution (if the chemical were to be polar and mix)
What is the oxidation state of nitrogen in N ?
Answer:
+5
Explanation:
1. When 6.0 grams of zinc are dropped into excess hydrochloric acid, how many grams of zinc chloride will be produced?
2. When 45.0 grams of copper (II) carbonate are decomposed with heat, how many grams of carbon dioxide will be produced? (Teachers note: Other product is copper (II) oxide.)
Please explain as well if possible! Thanks.
Explanation:
here are the answers for your questions
I basically converted the given grams to moles, and then multiplied that by the product-to-reactant ratio in the equation, and then convert that to grams
Answer:
Explanation:
1.
The reaction can be represented by the equation: Zn + 2 HCl -> ZnCl2 + H2
From the equation, molar ratio of Zn and ZnCl2 is 1:1.
Molar mass of Zn = 65.38
Molar mass of ZnCl2 = 65.38 + 35.45*2 = 136.28
So 6.0 grams of Zn will produce 6 / 65.38 * 136.28 = 12.5 grams
2.
As the only other product is copper (II) oxide, the reaction can be represented by the equation: CuCO3 -> CuO + CO2
From the equation, molar ratio of CuCO3 and CuO is 1:1.
Molar mass of CuCO3 = 123.55
Molar mass of CuO = 79.55
So 45.0 grams of CuCO3 will produce 45 / 123.55 * 79.55 = 28.96 grams
An intravenous solution was prepared by add-in 13.252 g of dextrose (C6H12O6) and 0.686 g of sodium chloride to a 250.0 mL volumetric flask and diluting to the calibration mark with water. What is the molarity of each component of the solution
Explanation:
Molarity(M) of a solution is defined as the number of moles of solute(n) present in one liter of solution(V).
[tex]M=\frac{n}{V}[/tex]
The number of moles(n) can be calculated as shown below:
[tex]n=\frac{mass of solute}{molar mass of solute}[/tex]
Molar mass of dextrose is 198.17 g/mol
Molar mass of NaCl is 58.5 g/mol.
Volume of the solution =250.0mL=0.250 L
The number of moels of dextrose([tex]n_{d}[/tex]) is:
[tex]n_{d} =\frac{13.252g}{198.17g/mol} \\=0.0669mol[/tex]
The number of moles of NaCl is:
[tex]n_{NaCl} =\frac{0.686 g}{58.5g/mol} \\\\=0.01177 mol[/tex]
Thus, the molarity of dextrose is:
[tex]M_d=\frac{n_d}{0.250 L} \\=0.0669mol/0.250L\\=0.268 M[/tex]
The molarity of NaCl is:
[tex]M_Na_Cl=\frac{n_d}{0.250 L} \\\\=0.0118mol/0.250L\\\\=0.0472 M[/tex]
Answer:
The molarity of dextrose is 0.268 M.
The molarity of NaCl is 0.0472 M.
Aoagive reason fluorine is a gas iodine is a solid
Answer:
because electron molecule in floirine are tightly held to the nuclei dispersion force are relatively weak and in iodine they are strong
why beta carbon hydrogen is easily replaced
Answer:
γ−Hydrogen is easily replacable during bromination reaction in presence of light , because Allylic substitution is being preferred.
Explanation:
that's all
γ−Hydrogen is easily replacable during bromination reaction in presence of light , because Allylic substitution is being preferred.
1. Why is it necessary to equalize the pressure(i.e, have the water level the same in each tube) before taking a volume reading?
2. Why is it important to use water that has been pre-saturated with CO2 in the gas burettes?
3.If your antacid sample had been contaminated by moisture, what effect(if any )would you expect this to have on your result
4.Explain why an'antacid is called as such,what is the role of the NAHCO3 or CACO3 in reactions?
Answer:
If you contact water with a gas at a certain temperature and (partial) pressure, the concentration of the gas in the water will reach an equilibrium ('saturation') according to Henry's law.
Explanation:
This means: if you increase the pressure (e.g. by keeping the vial closed), the CO2 concentration will increase. So it simply depends what concentration you need for your assay: 'CO2-saturated' water at low pressure or 'CO2-saturated' water at high pressure.
g When copper(II) chloride and sodium carbonate solutions are combined, solid copper(II) carbonate precipitates, leaving a solution of sodium chloride. Write the conventional equation, total ionic equation, and net ionic equation for this reaction. (Use the lowest possible coefficients. Be sure to specify states such as (aq) or (s). If a box is not needed, leave it blank.)
Answer:
When copper(II) chloride and sodium carbonate solutions are combined, solid copper(II) carbonate precipitates, leaving a solution of sodium chloride. Write the conventional equation, total ionic equation, and net ionic equation for this reaction.
Explanation:
The word equation for the reaction is:
Copper (II) chloride(aq) + sodium carbonate (aq) ->sodium chloride (aq) + copper carbonate(s)
The balanced chemical equation of the reaction is:
[tex]CuCl_2(aq)+Na_2CO_3(aq)->2NaCl(aq)+CuCO_3(s)[/tex]
The complete ionic equation is:
[tex]Cu^2+(aq)+2Cl^-(aq)+2Na^+(aq)+CO_3^2^-(aq)->2Cl^-(aq)+2Na^+(aq)+CuCO_3(s)\\[/tex]
The net ionic equation is obtained from the complete ionic equation after removing the spectator ions:
[tex]Cu^2^+(aq)+CO_3^2^-(aq)->CuCO_3(s)[/tex]
A sample of rutile, an ore of titanium consisting principally of TiO2(s), was found to be 65.2% TiO2(s) by mass, with the remainder being sand impurities. what is the minimum number of metric tons of the ore that must be processed to obtain 10.0 metric tons of titanium
A sample of rutile, an ore of titanium consisting principally of TiO2(s), was found to be 65.2% TiO2(s) by mass, with the remainder being sand impurities. what is the minimum number of metric tons of the ore that must be processed to obtain 10.0 metric tons of titanium
Explanation:
Ore contains ---- 65.2% [tex]TiO_2[/tex]
Mass% of titanium in TiO2 can be calculated as shown below:
[tex]mass percentage of Ti in TiO2=\frac{mass of Ti}{mass of TiO_2} *100\\=(47.86g/79.866g)* 100\\=59.9[/tex]
Given 10.0 metric tons of titanium is required.
The mass of ore that should be processed can be calculated as shown below:
Mass of Ti = ore x TiO2 % x Ti mass %
10.0 x 1000 kg = M (mass of ore) x (65.2/100) x (59.9/100) Ti
=>M=(10.0 metric tons) / (0.652 x 0.599)
=>M=25.6 metric tons
Hence, the mass of ore required is 25.6 metric tons.
The minimum amount of rutile ore to be processed is 25.6 metric tons.
Explanation:
Given :
The sample of rutile, 65.2% [tex]TiO_2[/tex] (s) by mass.
To find:
The minimum number of metric tons of the ore that must be processed to obtain 10.0 metric tons of titanium
Solution:
The atomic mass of titanium = 47.867 g/mol
The atomic mass of oxygen = 15.999 g/mol
The molar mass of [tex]TiO_2[/tex] [tex]= 47.867 g/mol+2\times 15.999 g/mol=79.865 g/mol[/tex]
Percentage of the titanium in [tex]TiO_2[/tex] :
[tex]Ti(\%)=\frac{1\times 47.867 g/mol}{79.865 g/mol}\times 100\\=59.935\%[/tex]
Quantity of titanium required = 10.0 metric ton
Quantity of [tex]TiO_2[/tex] from rutile ore = x
[tex]59.935\%=\frac{10.0 \text{metric ton}}{x}\times 100\\x=\frac{10.0 \text{metric ton}}{59.935}\times 100=16.7 \text{metric ton}[/tex]
Mass of [tex]TiO_2[/tex] form rutile ore= 16.7 metric ton
The percentage of [tex]TiO_2[/tex] in rutile = 65.2 %
The quantity of rutile ore to be processed = M
[tex]65.2\%=\frac{16.7 \text{metric ton}}{M}\times 100\\M=\frac{16.7 \text{metric ton}}{65.2}\times 100=25.6 \text{metric ton}[/tex]
The minimum amount of rutile ore to be processed is 25.6 metric tons.
Learn more about the percent of an element in the compound here:
brainly.com/question/12585837?referrer=searchResults
brainly.com/question/7640745?referrer=searchResults
how does iron I differ from iron II
Answer:
Metals tend to form positive oxidation states. Here, Iron (I) has an oxidation state of +1 while Iron (II) has an oxidation state of +2. Similarly, Lead (I) has an oxidation state of +1 while Lead(II) has an oxidation state of +2. A change in oxidation state can rather cause significant changes in the compound.
If 225 cal of heat is added to 15.0 g of 2-propanol at room temperature, 25ºC, the alcohol will reach a final temperature of ________ ºC. The specific heat of 2-propanol is 0.612 cal/(g•ºC).
Explanation:
I have no idea about this
Assume the following potential energies for a Newman projection: anti Me/H or anti Me/Me = 0 kcal/mole; eclipsed H/H = 4 kcal/mole; eclipsed Me/Me = 8 kcal/mole; gauche H/H and gauche H/Me = 0 kcal/mole; gauche Me/Me = 4 kcal/mole For 2,3-dimethylbutane, when drawing a Newman projection viewing down the C2-C3 bond, what is the potential energy of the most stable Newman projection?
Answer:
0 kcal/mole
Explanation:
The most stable Newman projection corresponds to the minimum potential energy: Answer (e) 0 kcal/mole
What is the concentration (M) of Ch3OH a solution prepared by dissolving of CH3OH sufficient water to give exactly 230 of solution?
Answer:
1.59 M
Explanation:
What is the concentration (M) of CH₃OH a solution prepared by dissolving 11.7 g of CH₃OH sufficient water to give exactly 230 mL of solution?
Step 1: Given data
Mass of CH₃OH: 11.7 gVolume of solution: 230 mL (0.230 L)Step 2: Calculate the moles corresponding to 11.7 g of CH₃OH
The molar mass of CH₃OH is 32.04 g/mol.
11.7 g × 1 mol/32.04 g = 0.365 mol
Step 3: Calculate the molarity of the solution
M = moles of solute / liters of solution
M = 0.365 mol / 0.230 L = 1.59 M
Write the separation scheme for the isolation of triphenylmethanol from the reaction mixture once the reaction is complete. The separation begins after the addition of HCl and water to the reaction and includes the column chromatography procedure to further purify crude triphenylmethanol isolated in the day 1 procedure.
````````````````````
How we get this answer?? I need the way with rules?
Answer:
Do you know the formula¿?
Balance the following chemical equation by
providing the correct coefficients.
C3H8 + O2 + CO2 + H2O
A 2.8.4.2
B 1.5.3.4
Answer:
C3H8 + 502+3CO2 + 4H20
Explanation:
In order to get this answer you would have to would balance out the carbons on the products side by multiplying CO2 by 3. The new equation will be
C3H8 + 02 ----> 3CO2 + H20
Now, that the carbons are balanced, we will look at the hydrogens. We can multiply the number of waters on the product side by 4, to make 4 H20 molecules. This gives both sides of the equation 8 hydrogens. Next we can check our oxygens. There will be 10 oxygens on the products side and 2 on the reactants so to balance these out, we multiply the 02 on the reactants side by 5.
The absorption spectrum of neon has a line at 633 nm. What is the energy of this line? (The speed of light in a vacuum is 3.00 x 108 m/s, and Planck's constant is 6.626 x 10-34 J·s.)
Answer:
B
Explanation:
E = hc/[tex]\lambda[/tex]. Remember, it is in meters not nanometers so you have to convert. You end up with B.
What is the concentration of a 1:15 dilution of a 3.0 M solution of nacl
Answer:
0.20M NaCl is the concentration of the NaCl dilution
Explanation:
A dilution consist on the addition of more solvent in a solution in order to decrease their concentration.
In this problem, the 3.0M NaCl solution is decreasing their concentration 15 times. That is:
3.0M NaCl / 15 =
0.20M NaCl is the concentration of the NaCl dilutionStudy this chemical reaction: 2Fe(s) 3Pb(NO3)2(aq) 3Pb(s) 2Fe(NO3)3(aq) Then, write balanced half-reactions describing the oxidation and reduction that happen in this reaction.
Answer:
Explanation:
2Fe(s) + 3Pb(NO₃)₂(aq) = 3Pb(s) + 2Fe(NO₃)₃(aq)
Half ionic reactions
2Fe(s) = 2Fe⁺³ + 6e
3Pb⁺² + 6e = 3 Pb(s)
In the first reaction Fe is oxidised to Fe⁺³ because its oxidation number increases from zero to + 3 .
In the second reaction , Pb⁺² is reduced to Pb (s) because its oxidation number is reduced from + 2 to zero.
3. A mixture of gases- oxygen, carbon dioxide and nitrogen - exerts a total pressure of 107.6 kPa. If the oxygen
exerts 45.8 kPa and the carbon dioxide exerts 37.1 KPA, then what is the partial pressure of the nitrogen?
Answer: 23.7kPa
Explanation: Given:
P total= Sum of partial P of all gases in the mix P total = PO2 +PN2 +PCO2 107.6 = 45.8 + PN2 +37.1 PN2= 107.6- (45.8+ 37.1) = 107.6- 83.1 = 23.7kPA Therefore Partial pressure of Nitrogen is 23.7 kPAPredict the Normality of H2SO4 if 75 ml of 96.6 % pure H2SO4 added to 425 ml water. The density of H2SO4 is 1.83 g/cm3?
Explanation:
Normality is one of the concentration terms.
It is expressed as:
[tex]N=\frac{mass of the substance}{equivalent mass}* \frac{1}{volume of solution in L.}[/tex]
The volume of the solution is 425 mL.
Mass of sulfuric acid given is:
[tex]mass=volume * purity* density\\ = 75 mL * 0.966 * 1.83 g/mL\\\\=132.5 grams\\[/tex]
The equivalent mass of sulfuric acid is 49.0g/equivalents
Hence, the normality of the given solution is:
[tex]N=\frac{132.5g}{49.0g/equi.} *\frac{1000}{425mL} \\Normality=6.36N[/tex]
Answer is: 6.36N.
Gaseous ammonia chemically reacts with oxygen gas to produce nitrogen monoxide gas and water vapor. Calculate the moles of nitrogen monoxide produced by the reaction of 1.5 moles of oxygen. Be sure your answer has a unit symbol, if necessary, and round it to 2 significant digits.
Explanation:
here's the answer to your question
