When 1.00 g potassium chlorate is dissolved in 50.0 g water in a Styrofoam calorimeter of negligible heat capacity, the temperature decreases from 25.00°C to 23.36°C. Calculate q for the water and ?H° for the process.The specific heat of water is .

Answer:

This is false.

Step-by-step explanation:

Since absolute value bars change negatives into positives and positive into themselves (positives) we can put the example:

[tex]-|8|\\[/tex]

When we remove the absolute value bars, 8 will still equal 8. But, we have a negative, therefore the 8 has a negative after being simplified with absolute value.

x = -8, not positive 8.

Answer:

Ther are no values of x that would make this statement true. There is no solution.

Step-by-step explanation:

Answer:

Step-by-step explanation:

The down payment is 30% of $235,000, which is $70,500. This means they are financing the remaining amount of $164,500.

Using the loan amount, interest rate, and loan term, we can calculate the monthly payment using the formula for a fixed-rate mortgage:

M = P [ i(1 + i)^n ] / [ (1 + i)^n – 1]

where:

M = monthly payment

P = loan amount

i = monthly interest rate (annual rate divided by 12)

n = total number of payments (loan term in years multiplied by 12)

Plugging in the numbers, we get:

M = 164500 [ 0.038/12 (1 + 0.038/12)^360 ] / [ (1 + 0.038/12)^360 – 1]

Simplifying this expression, we get:

M = $765.84

Therefore, their anticipated monthly payments would be $765.84.

therefore, we have shown that: [tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})[/tex] assuming that x2 ≠ x1.

Slope refers to the measure of steepness of a line or a curve. In mathematics, slope is usually denoted by the letter "m" and is defined as the ratio of the change in the y-coordinate to the change in the x-coordinate between two points on a line.

The formula for calculating the slope between two points (x1, y1) and (x2, y2) on a line is:

[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})[/tex]

by the question.

To finds the slope of a line passing through two points (x1, y1) and (x2, y2), we use the slope formula:

[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})[/tex]

This formula represents the change in y divided by the change in x between the two points.

Now, assuming that x2 ≠ x1, we can simplify the formula as follows:

[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})*(1/1)[/tex]

Multiplying the numerator and denominator by 1, which in this case is (x2 - x1) / (x2 - x1), we get:

[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})*(x_{2}-x_{1})/(x_{2}-x_{1})[/tex]

Simplifying the numerator, we have:

[tex]m= (y_{2} -y_{1} )/(x_{2}-x_{1})/[(x_{2}-x_{1})*1][/tex]

The term (x2 - x1) cancels out, leaving us with:

[tex]m=(y_{2}-y_{1} /1[/tex]

To learn more about slope:

https://brainly.com/question/3605446

#SPJ1

Step-by-step explanation:

try this option, all the details are in the attachment.

To solve this equation, begin by expanding the parentheses.

y = 4x² + 40x + 100 + 16

Then, collect like terms on the left hand side.

y = 4x² + 40x + 116

Finally, rearrange the equation to get y on the left side.

4x² + 40x - (y - 116) = 0

The final answer will be a quadratic equation.

Doing simple algebra with the two summations we can see that:

[tex]\Sigma x = 799\\\\\Sigma x^2 = 7,188[/tex]

First, we know that there are 97 passengers, and we know that the summation:

[tex]\Sigma (x - 5) = 314[/tex]

Where x represents the weights.

Then we can rewrite that sum as:

[tex]\Sigma (x - 5) = \Sigma x - 97*5[/tex]

And replace that in the original equation to get:

[tex]\Sigma x - 97*5 = 314\\\Sigma x = 314 + 5*97 = 799[/tex]

So that is the first summation, now let's get the second one,  we can rewrite the summation as:

[tex]\Sigma (x - 5)^2 = \Sigma x^2 - 10x +25 \\\\\Sigma x^2 - \Sigma 10x + \Sigma 25[/tex]

Where remember we have 97 terms, and the summation is equal to 1623, then:

[tex]\Sigma x^2 - \Sigma 10x + 25*97 = 1623[/tex]

Now we can replace the second term by the thing we found earlier:

[tex]\Sigma x^2 - 10\Sigma x + 25*97 = 1623\\\\\Sigma x^2 - 10*799 + 25*97 = 1623\\\\\Sigma x^2 = 1623 + 10*799 - 25*97\\\\\Sigma x^2 = 7,188[/tex]

That is the answer.

Learn more about summations at:

https://brainly.com/question/26243301

#SPJ1

a) The probability that a randomly selected subprime mortgage in the state during November 2008 was neither in foreclosure nor repossessed is 0.50.

b) The probability that a randomly selected subprime mortgage in the state during November 2008 was not current is 0.32.

Probability describes the chance or likelihood that an expected outcome or event does or does not occur.

Probability is the quotient of the expected outcome over the total number of possible outcomes or events.

Probabilities can be stated in ratios (fractions, decimals, or percentages).

Mortgage Status

                  Current    Past Due    In Foreclosure    Repossessed    Total

Number     156,330      58,310              8,550                5,590       228,780

The number of subprime mortgage neither in foreclosure nor repossessed = 114,640 (156,330 + 58,310)

The probability that a subprime mortgage in the state was neither in foreclosure nor repossessed = 0.50 (114,640/228,780).

The number of subprime mortgage that was not current = 72,450 (58,310 + 8,550 + 5,590) or (228,780 - 156,330)

The probability that a subprime mortgage in the state was not current = 0.32 (72,450/228,780).

Learn more about probabilities at https://brainly.com/question/25870256.

#SPJ1

Answer: At most 18 acute angles

Step-by-step explanation:

The sum of the interior angles of an n-sided polygon is (n-2) × 180 degrees. In a convex polygon, each interior angle is less than 180 degrees.

Let a₁, a₂, ..., a₁₁ be the interior angles of the 11-sided polygon. Then the sum of the interior angles is:

a₁ + a₂ + ... + a₁₁ = (11-2) × 180 = 1620 degrees

Since each angle is acute, we know that each angle is less than 90 degrees. Let A be the number of acute angles. Then the sum of the acute angles is at most:

A × 90

So we have:

a₁ + a₂ + ... + a₁₁ ≤ A × 90

Substituting the sum of the interior angles, we get:

1620 ≤ A × 90

Solving for A, we get:

A ≤ 18

Therefore, the polygon can have at most 18 acute angles.

Answer:

  see attached

Step-by-step explanation:

You want to graph the function f(x) = 3/5x -5.

For graphing purposes, it is convenient to choose values of x that result in integer values of y. In this case, the multiplier of x (the slope) has a denominator of 5, so it is convenient to choose x-values that are multiples of 5.

For x = 0, y = 3/5·0 -5 = -5

For x = 5, y = 3/5·5 -5 = 3 -5 = -2

Suitable points for your plot are (0, -5) and (5, -2). These are shown in the attachment.

Instead of 2.00 as mentioned in the question, the semester GPA is 1.38. Please double-check your calculations or provide more details if you made an error when reporting your grades or computing your GPA.

Students must devote approximately 135 hours (45 x 3) of class, instructional, and independent time to a three credit unit course. Students who enroll in a course for four credit hours must dedicate around 180 (45 x 4) hours to it, split between in-class and out-of-class work.

You must first translate each letter grade using the common 4.0 scale into its equivalent numerical number before you can determine your semester GPA:

A = 4.0

B = 3.0

C = 2.0

D = 1.0

F = 0.0

E = 0.0 (equivalent to F)

Then, you can use the formula:

(Total grade points) / GPA (total credit hours)

Using this formula, we can calculate your semester GPA as follows:

FYE 105: F (0.0) x 3 credit hours = 0.0 grade points

MAT 150: E (0.0) x 3 credit hours = 0.0 grade points

ENG 101: D (1.0) x 3 credit hours = 3.0 grade points

BIO 112: A (4.0) x 3 credit hours = 12.0 grade points

BIO 113: B (3.0) x 1 credit hour = 3.0 grade points

Total grade points = 0.0 + 0.0 + 3.0 + 12.0 + 3.0 = 18.0

Total credits earned is 13 (3 + 3 + 3 + 3 + 1)

GPA = 18.0 / 13 = 1.3846

To know more about semester GPA visit:-

https://brainly.com/question/13871451

#SPJ1

The quadrilaterals which have both line and rotational symmetry of order more than 1 are square, and rhombus

Symmetry is a fundamental concept in mathematics and geometry. It refers to the property of a shape that remains unchanged when it is transformed in a certain way.

Now, let's talk about quadrilaterals that have both line and rotational symmetry of order more than 1. One example of such a quadrilateral is a square.

Another example of a quadrilateral with both line and rotational symmetry of order more than 1 is a rhombus. A rhombus is a type of quadrilateral where all four sides are equal in length, and opposite angles are equal.

In summary, a square and a rhombus are examples of quadrilaterals that have both line and rotational symmetry of order more than 1.

To know more about quadrilateral here

https://brainly.com/question/29934440

#SPJ4

Complete Question:

Name the quadrilaterals which have both line and rotational symmetry of order more than 1.

Step-by-step explanation:

[tex]\textsf{For this problem, we are asked to draw an angle that is 150}^{\circ}.[/tex]

[tex]\textsf{We will need a Protractor to draw this angle.}[/tex]

[tex]\large\underline{\textsf{To Draw an Angle with a Protractor;}}[/tex]

[tex]\textsf{First, notice a point at the bottom of the Protractor. This is where we will start.}[/tex]

[tex]\textsf{Draw a Straight Line from the point to the 0}^{\circ} \ \textsf{mark.}[/tex]

[tex]\textsf{Secondly, use a ruler to carefully draw a straight line towards the 150}^{\circ} \ \textsf{mark.}[/tex]

[tex]\textsf{Note that some Protractors may be different from others. Similar steps should apply.}[/tex]

[tex]\textsf{Refer to the picture. It represents what the angle should look like afterwards.}[/tex]

To do :-

Instruments required:-

Steps of construction:-

Hence angle ECB represents 150° .

Precaution:- do not change the arm length of the compass.

and we are done!

The expected value of playing this game is -$0.251. This means that, on average, you can expect to lose 25.1 cents every time you play this game.

The term "outcome" generally refers to the result or effect of an action, process, or event. It refers to what happens as a consequence of a particular decision, activity, or circumstance.

To calculate the expected value, we multiply the possible outcomes by their probabilities and then sum them up.

Let's start with the possible outcomes:

If you win, you make a profit of $749, so the outcome is $749.

If you lose, you lose $1, so the outcome is -$1.

The probabilities are:

Probability of winning is 0.001.

Now we can calculate the expected value:

Expected value = (0.001 * $749) + (0.999 * -$1)

Expected value = $0.748 - $0.999

Expected value = -$0.251

Therefore, the expected value of playing this game is -$0.251. This means that, on average, you can expect to lose 25.1 cents every time you play this game.

To know more about outcome visit:

https://brainly.com/question/14351525

#SPJ1

Step-by-step explanation:

this is the answerrr

without calculator

Answer:

Step-by-step explanation:

Answer:

≈ 4.57

Step-by-step explanation:

(-2) ^ 2 = 4

4 - (-28) = 4 + 28 = 32

32/7 ≈ 4.57

The common factors of sixteen and twenty are 1, 2, and 4.

The factors of sixteen are 1, 2, 4, 8, and 16. The factors of twenty are 1, 2, 4, 5, 10, and 20. The factors that are common to both numbers are 1, 2, and 4.

To calculate the factors of sixteen, we can start by dividing sixteen by two until we cannot divide any further. We can start with sixteen divided by two, which equals eight. Eight divided by two equals four. Four divided by two equals two. Two divided by two equals one. As we can see, the factors of sixteen are 1, 2, 4, 8, and 16

To calculate the factors of twenty, we can start by dividing twenty by two until we cannot divide any further. We can start with twenty divided by two, which equals ten. Ten divided by two equals five. Five divided by two equals two. Two divided by two equals one. As we can see, the factors of twenty are 1, 2, 4, 5, 10, and 20.The common factors of sixteen and twenty are 1, 2, and 4. This can be determined by comparing the two lists of factors. As we can see, 1, 2, and 4 are present in both lists.

Learn more about factors here:

https://brainly.com/question/29128446

#SPJ4

Complete question

What are the common factors of sixteen and twenty ?

a. Nοne οf these measure οf central tendency dοn't exist fοr this data set. Optiοn d) is cοrrect

b. As the sum οf all οbservatiοns wοuld chance, the mean wοuld be affected by the change. Optiοn a) is cοrrect

In statistics, the central tendency is the descriptive summary οf a data set. Thrοugh the single value frοm the dataset, it reflects the centre οf the data distributiοn. Mοreοver, it dοes nοt prοvide infοrmatiοn regarding individual data frοm the dataset, where it gives a summary οf the dataset. Generally, the central tendency οf a dataset can be defined using sοme οf the measures in statistic.

c.

Suppοse that, the largest measurement 97 is remοved.

The number οf οbservatiοns as well as the sum οf all οbservatiοns wοuld change.

Therefοre, the median and the mean wοuld be changed and οptiοn a) and b) are cοrrect.

d.

Since there are three mοdes, the mean, median and mοde must nοt be cοmpared tο each οther fοr skewness.

Instead, it is required tο grοup data in intervals and οbserve the pattern οf classes versus frequencies, as displayed in histοgram.

Therefοre, the distributiοn appears rοughly symmetric and οptiοn c) is cοrrect.

Learn more about central tendency

https://brainly.com/question/30218735

#SPJ1

Answer:

Dont understand. Repeat question?

Step-by-step explanation:

Answer:

  "permutations that preserve distances"

Step-by-step explanation:

You want to know the meaning of "isometries" in the given discussion of dihedral groups.

The wording of the paragraph tells you the meaning:

  "isometries ... are permutations that preserve distances."

__

Additional comment

Often, writing that introduces an unfamiliar word will describe the meaning of that word. Here, the meaning is described, along with several examples (translations, rotations, reflections).

The word isometry has its origin in ancient Greek. The prefix "iso-" means "equal", and "-metry" comes from metron, meaning "measure." Effectively, an isometry is a transformation that preserves measures.

Answer:

To convert 49% to a fraction, we can simply write it as 49/100. This is because a percentage is a way of expressing a number as a fraction of 100. So 49% means 49 out of 100, which can be written as the fraction 49/100.

Answer:

49/100

Step-by-step explanation:

Percent means out of 100.

49%

49/100

Answer:

39.

Step-by-step explanation:

From the group of 10-14 hours worked per week, 8 students.

From the group of 15-19 hours worked per week, 4 students.

From the group of 20-24 hours worked per week, 12 students.

From the group of 25-29 hours worked per week, 8 students.

From the group of 30-34 hours worked per week, 4 students.

And finally, from the group of 35+ hours worked per week, 3 students.


So, 8+4+12+8+4+3 = 39 students.

Answer:

We can substitute the given values of p, m, and n into the formula for h:

h = p√(m^2 + n)

h = 3√(6^2 + 20)

h = 3√(36 + 20)

h = 3√56

We can simplify this by factoring 56 into its prime factors:

h = 3√(2^3 × 7)

h = 3 × √(2^2 × 7) × √2

h = 3 × 2√7

Therefore, when p = 3, n = 20, and m = 6, the value of h is 6√7 or approximately 13.42.

The result of the division in ordinary decimal notation is 300.

Scientific notation, also known as standard form or exponential notation, is a method of expressing very large or very small numbers in a compact and standardized way.

To perform the indicated operation, we need to divide 0.00036 by 0.0000012.

First, let's express both numbers in scientific notation

0.00036 = 3.6 x 10^(-4)

0.0000012 = 1.2 x 10^(-6)

Now we can divide the two numbers and simplify

3.6 x 10^(-4) / 1.2 x 10^(-6) = (3.6 / 1.2) x 10^(-4-(-6)) = 3 x 10^(2)

Finally, we can convert this result back to ordinary decimal notation

3 x 10^(2) = 300

Learn more about scientific notation here

brainly.com/question/18073768

#SPJ4

The given question is incomplete, the complete question is:

Convert each number to scientific notation and perform the indicated operations. Express the result in ordinary decimal notation. 0.00036/0.0000012

Answer:

multiply them fro your answer

Answer: y = 3x-2 (for first question)

Step-by-step explanation:

Equation of the line: y = mx+c. For A, it passes through (0, -2) and has a gradient of 3. So, you substitute the values inside the equation.

x = 0

y = -2

m = 3

-2 = 0+c

c= -2

ans: y = 3x-2

Use the same method to complete the rest of the questions. GL

Note: I am just a student, if I get this wrong I hope someone corrects me, thanks

Answer: 1/3 chance or 33.33333%

Step-by-step explanation: There are only 3 odd numbers on the die, 1,3,5 so there is a 1/3 chance it is 3

For the given statements for domain and range, option 3 and option 4 are correct answers.

The sets of all the x-coordinates and all the y-coordinates of ordered pairs, respectively, are the domain and range of a relation. With functions, we enter various numbers, and the output is a new set of numbers. The two essential characteristics of functions are domain and range. A function's domain and range are its constituent parts.

The domain of the function are all the input values while the range are the output values of the function for the given input.

In the given options, option 3 and 4 are correct as the functions have the same input but not the same output.

That is, they have the same domain, all real numbers, but not the same range.

Hence, for the given statements for domain and range, option 3 and option 4 are correct answers.

Learn more about domain and range here:

https://brainly.com/question/30133157

#SPJ1

The quadratic function, x2 + 14x + 49 f, would have 7 as the lone zero.

Any subset of a Cartesian product is a relation.

For instance, a subset of is known as a "binary relation from A to B," and in specifically, a subset of is known as a "relation on A."

These ordered pairs (a,b) with first components from A and second components from B make up a binary relation from A to B.

A function is a relation that links every item in a set X to a single item in a different set Y. (possibly the same set).

A graph, which is the collection of all ordered pairs (x, f (x)), serves as the sole representation of a function.

As you can see from these definitions, every function is a relation from X to Y, but not vice versa .

(x - 7)(x - 7)

⇒ (x - 7)²

⇒ x² + 7²+ 2 × 7 × x

⇒ x² + 49 + 14x

⇒ x² + 14x + 49

Learn more about function here:

brainly.com/question/2253924

#SPJ1

Answer:

Step-by-step explanation: