Answer:
4620
Explanation:
440.0+10.50
=4620
Select the correct answer.
Which equation correctly relates kinetic energy, mass, and velocity?
Answer:
B
Explanation:
I just took the test and got 100%
*NEED THIS ANSWERED ASAP*
run this moving man simulation to get a visual understanding of all that you learned in this lesson about position velocity and acceleration during this activity you will explain these Concepts first click the introduction tab, and answer the question. set a small constant V on the velocity slider and check the velocity Vector box. click play, watch, and describe the motion in terms of what you see happening with the man's displacement, velocity and acceleration.
Answer:
When the velocity is set to a constant value, the displacement increases with time but the acceleration remains zero
Explanation:
plato
When the velocity is set to a constant value, the displacement increases with time but the acceleration remains zero.
What is Velocity?Velocity is the directional speed of a object in motion as an indication of its rate of change in position as observed from a particular frame of reference and as measured by a particular standard of time.What is Displacement?Displacement is defined as the change in position of an object. It is a vector quantity and has a direction and magnitude.What is Acceleration?Acceleration, rate at which velocity changes with time, in terms of both speed and direction. A point or an object moving in a straight line is accelerated if it speeds up or slows down.When the velocity is set to a constant value, the displacement increases with time but the acceleration remains zero.
To learn more bout Velocity,Displacement,Acceleration refer:https://brainly.com/question/1192983
#SPJ2
A child kicks a ball horizontally with a speed of 4.8 m/s off a deck 3.5 m off the ground. How far, in meters, from the deck does the ball land on the ground?
Answer:
2.605m
Explanation:
Using the formula for calculating Range (distance travelled in horizontal direction)
Range R = U√2H/g
U is the speed = 4.8m/s
H is the maximum height = ?
g is the acc due to gravity = 9.8m/s²
R = 3.5m
Substitute into the formula and get H
3.5 = 4.8√2H/9.8
3.5/4.8 = √2H/9.8
0.7292 = √2H/9.8
square both sides
0.7292² = 2H/9.8
2H = 0.7292² * 9.8
2H = 5.21
H = 5.21/2
H = 2.605m
Hence the height of the ball from the ground is 2.605m
Calculate the gravitational potential energy of a 2 kg banana hanging 5
meters above the ground.
(Use 10 m/s2 for gravity)
Answer:
100 J
Explanation:
The potential energy is given by the formula ...
PE = mgh
= (2 kg)(10 m/s^2)(5 m) = 100 J
A 0.85-kg arrow flies through the air at a speed of 19 m/s. What is the momentum of the arrow?
16 kg m/s
22 kg m/s
160 kg m/s
360 kg m/s
Answer:
16 kg m/sExplanation:
The momentum of an object can be found by using the formula
momentum = mass × velocity
From the question we have
momentum = 0.85 × 19 = 16.15
We have the final answer as
16 kg m/sHope this helps you
6th grade science I mark as brainliest.
Answer:
divide 10 by 50.
Explanation:
Because its time over speed 10/50
5 meter/ second
I think it's helpful
follow me and don't forget to Mark me as brainlist please
Which of the following is a warning sign of an abusive relationship?
Answer: The choices?
Explanation:
plzzzz help me this is due today. only need help with these two questions and the element is oxygen.
How do protons, neutrons, and electrons differ in terms of their electrical charges and locations within the atom?
Describe the four fundamental forces. Which of these forces are involved in chemical bonding?
Answer: thanks for the point
Explanation:
Will mark brainiest!!!
1. A __ is caused by a sudden shift in the ocean crust which displaces the water. *
2. A tsunamis is possible, but unlikely at a __ plate boundary where two plates are moving sideways past each other. *
3. A Shallow __ is a good indicator of tsunamis, but sends data very slowly and cannot detect earthquakes. *
4. Tsunamis are common at __ plate boundaries, since large earthquakes release the built up pressure, resulting in a quick vertical movement of the plate. *
5. The Indonesian Earthquake of 2004 had a 9.1__, which was the third largest ever recorded in human history. *
All possible answers:
A. Earthquake
B. Tsunami
C. Magnitude
D. Sensor
E. Transform
F. Convergent
G. Divergent
Answer:
1. Tsunami
2.Divergent
3.Sensor
4.Convergent
5.Magnitude
Explanation:
Nore ordered an ice cream cone.
Answer:
okay
Explanation:
okay
Answer:
Cool
Explanation:
I WILL GIVE BRAINLIEST IF SOMEONE GETS THIS......
A eureka can of mass 100g and cross-section area 100cm2 is filled with water of density 1g/cm3. A piece of metal of mass 20g and density 8g/cm3 is lowered into the can. ( height of can 10cm ) calculate:
a) the total mass of can before the metal was lowered.
b) the volume of water that overflowed
c) the final mass of can and its content
Answer:
Explanation:
a)
Firstly to calculate the total mass of the can before the metal was lowered we need to add the mass of the eureka can and the mass of the water in the can. We don't know the mass of the water but we can easily find if we know the volume of the can. In order to calculate the volume we would have to multiply the area of the cross section by the height. So we do the following.
100[tex]cm^{2}[/tex] x 10cm = 1000[tex]cm^{3}[/tex]
Now in order to find the mass that water has in this case we have to multiply the water's density by the volume, and so we get....
[tex]\frac{1g}{cm^{3} }[/tex] x 1000[tex]cm^{3}[/tex] = 1000g or 1kg
Knowing this, we now can calculate the total mass of the can before the metal was lowered, by adding the mass of the water to the mass of the can. So we get....
1000g + 100g = 1100g or 1.1kg
b)
The volume of the water that over flowed will be equal to the volume of the metal piece (since when we add the metal piece, the metal piece will force out the same volume of water as itself, to understand this more deeply you can read the about "Archimedes principle"). Knowing this we just have to calculate the volume of the metal piece an that will be the answer. So this time in order to find volume we will have to divide the total mass of the metal piece by its density. So we get....
20g ÷ [tex]\frac{8g}{cm^{3} }[/tex] = 2.5 [tex]cm^{3}[/tex]
c)
Now to find out the total mass of the can after the metal piece was lowered we would have to add the mass of the can itself, mass of the water inside the can, and the mass of the metal piece. We know the mass of the can, and the metal piece but we don't know the mass of the water because when we lowered the metal piece some of the water overflowed, and as a result the mass of the water changed. So now we just have to find the mass of the water in the can keeping in mind the fact that 2.5[tex]cm^{3}[/tex] overflowed. So now we the same process as in number a) just with a few adjustments.
[tex]\frac{1g}{cm^{3} }[/tex] x (1000[tex]cm^{3}[/tex] - 2.5[tex]cm^{3}[/tex]) = 997.5g
So now that we know the mass of the water in the can after we added the metal piece we can add all the three masses together (the mass of the can. the mass of the water, and the mass of the metal piece) and get the answer.
100g + 997.5g + 20g = 1117.5g or 1.1175kg
Thermal energy can not be transferred or transformed into other forms of energy.
O True
False
Answer:
I believe it is false I took the test
Answer:
false
Explanation:
Suppose you are in a moving car and the motor stops running. You step on the brakes and slow the car to half speed. If you release your foot from the brakes, will the car speed up a bit, or will it continue at half speed and slow due to friction?
Answer:
See the answer below
Explanation:
If you step on the brake of a car while driving, the frictional force between the tires of the car and the surface of the road increases in opposition to the motion of the car. Consequently, the car slows down.
If you release your foot from the brake pedal when the car is still at half speed, the frictional force reduces and the car speeds up a bit even without pressing the throttle. Eventually, the frictional force will slow down and stop the car if the throttle is not pressed.
(please awnser i need my grade up) We can calculate the about of potential energy in an object using the formula PE = mgh where m is the mass of the object, g is the acceleration due to gravity (which on Earth is a constant 9.8) and h is the height the object is from ground. If I have a 2kg bar of gold and raise that to a shelf mounted 3 meters from the ground what is that objects GPE? Remember to insert the numbers into the formula like this PE = (2) (9.8) (3) , you may use your calculator to complete this multiplication problem.
Answer:
88.2 J
Explanation: Hope I helped <3
what makes up a atom
Answer:
They're typically made up of three main parts: protons, neutrons and electrons. Think of the protons and neutrons as together forming a “sun”, or nucleus, at the centre of the system. The electrons orbit this nucleus, like planets. If atoms are impossibly small, these subatomic particles are even more so.
Explanation:
hope i helped.
Answer:
Atoms consist of a nucleus made of protons and neutrons orbited by electrons. ... We now know that atoms are made up of three particles: protons, neutrons and electrons — which are composed of even smaller particles, such as quarks.
Explanation:
4. What does doubling the voltage do to the strength of the electromagnet?
Answer:
it can make it stronger!
Answer:
The strength of the magnet in this case is directly proportional to the total voltage sum of all of the batteries
Please do all of i will give you brainlest and thanks to best answer plz do it right
Answer:
winter solstice i think
Explanation:
Answer:
a/ solar eclipse
Explanation:
because the moon is on the left side of earth
A block is released from rest at the top of a hill of height h. If there is negligible friction between the block and the hill, the block arrives at the bottom of the hill with speed v.
Answer:
v / √2
Explanation:
A blocked from rest at the top of a hill of height h it there is negligible friction between the block and the hill, the block arrives at the bottom of the hill with speed. The block is released from rest at the top of another hill with a rough surface and height h. if one-half of the initial mechanical energy of the block Earth System is lost due to friction as the block descends the hill, the block will reach the bottom of the hill with a speed of?
Solution:
For the first block block, its potential energy at the top of the hill when it is at rest is converted to kinetic energy after release with a velocity v.
The kinetic energy = (1/2)mv², where m is the mass of the block.
For the other block placed on the top of the rough hill, the mechanical energy (kinetic energy) is halved due to the roughness of the hill. If u is the speed of this block at the bottom of the hill then:
kinetic energy of block on the rough hill = (1//2)mu²
Hence:
(1//2)mu² = half of main system kinetic energy
(1//2)mu² = 1/2 * (1/2)mv²
mu² = (1/2)mv²
u² = (1/2)v²
u = √(v²/2)
u = v / √2
Hence the speed at the bottom of the rock of the block placed on the rough surface is v / √2
3. What is the best way to help with
mining problem in the future?
Answer:
1) Mining companies have an impressive track record for delivering continuous improvements in safety and risk governance standards. We have no doubt that the professionalism and expertise present within the industry will ensure that any new and emerging risk challenges are dealt with in an equally determined fashion.
2) Insurers have recognized the approach and achievements of mining companies in identifying, mitigating and retaining their risks. Many mining companies have close and longstanding relationships with their insurers built through regular dialogue with mining company executives and visits to mining sites and processing facilities.
3) This document should be of value to any organization involved in this ever-evolving industry.
4) The very nature of mining natural resources means that many businesses will have operations in some of the most remote and inhospitable areas in the world and very often coupled with a high susceptibility to natural catastrophe.
5) In addition to the traditional risk factors, the mining industry now faces an even wider range of challenges. Factors such as climate change, new technologies, economic uncertainties and secure supply of key consumables like electricity, water, gas and other fuels are all difficult to predict and bring additional complications to securing appropriate balance sheet protection.
4. A Ferrari travels 350km in 2 hours. What was it's
s speed?
A fish that lives near the surface of the ocean most likely has a swim bladder (or a body cavity) that is full of
Answer:
A fish that lives near the surface of the ocean most likely has a swim bladder (or body cavity) that is full of oxygen
Explanation:
The swim bladder is the organ present in the majority of bony fishes that provides buoyancy. The swim bladder is a bladder filled with oxygen and found in the in the body of the fish
The function of the swim bladder is to provide adequate ballast or hydrostatic balance to enable a fish to keep to a certain depth in a body of water thereby the fish does not float to the surface or sinks further
The swim bladder is also used as a sound communicating organ.
an object increases its velocity from 22 m/s to 36 m/s in 5s.what is the acceleration of the object
Answer:
2.8 m/s²
Explanation:
v=v0+at <=> 36 = 22 + a×5 <=> 5a = 36-22 <=> 5a = 14 <=> a = 14/5 <=>
<=> a = 2.8 m/s²
18. Which would be the most reliable source of information to use for a history report? (2 points)
O An encyclopedia
O A magazine article
O A newspaper
A TV show
Answer:
encyclopedia most reliable I think
a lift travelling up to the top floor of the empire state building with a mass of 4200kg and a kenetic energy of 4116 J
Though the question does not ask for anything, I'll assume you need to calculate the speed of the lift.
Answer:
The lift travels at 1.4 m/s
Explanation:
Kinetic Energy
Is the type of energy of an object due to its state of motion. It's proportional to the square of the speed and the mass.
The equation for the kinetic energy is:
[tex]\displaystyle K=\frac{1}{2}mv^2[/tex]
Where:
m = mass of the object
v = speed at which the object moves
The kinetic energy is usually expressed in Joules (J)
If we already know the value of the kinetic energy, we can find the speed by solving for v:
[tex]\displaystyle v=\sqrt{\frac{2K}{m}}[/tex]
The lift has a mass of m=4200 Kg and has a kinetic energy of K=4116 J, thus it's moving at a speed of:
[tex]\displaystyle v=\sqrt{\frac{2*4116}{4200}}[/tex]
[tex]\displaystyle v=\sqrt{1.96}[/tex]
v = 1.4 m/s
The lift travels at 1.4 m/s
2.
Mass of car = 200 kg and g = 10 m/s? or 10 N/kg (approx. value)
position of car
GPE (J) = mgh KE (J) =
GPE + KE
0.5mv2
(height)
60.000
top (30 m) before
ride starts so v=0
Halfway (15 m)
30,000
34 way down (7.5
4,000
m)
bottom(0 m)
0
3.
A car tyre is pumped to a pressure of 20000 Nm-2 in the morning when the temperature is 23 oC. Later in the day, the temperature rises to 34 oC. Calculate the new pressure in the tyre. The volume is kept constant.
Answer:
20743.24 Nm¯²
Explanation:
From the question given above, the following data were obtained:
Initial pressure (P1) = 20000 Nm¯²
Initial temperature (T1) = 23 °C
Final temperature (T2) = 34 °C
Final pressure (P2) =?
Volume = constant
Next, we shall convert celsius temperature to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T1) = 23 °C
Initial temperature (T1) = 23 °C + 273 = 296 K
Final temperature (T2) = 34 °C
Final temperature (T2) = 34 °C + 273 = 307 K
Finally, we shall determine the final (i.e the new) pressure of the tyre.
Initial pressure (P1) = 20000 Nm¯²
Initial temperature (T1) = 296 K
Final temperature (T2) = 307 K
Final pressure (P2) =?
Volume = constant
Since the volume is constant, the final (i.e the new) pressure of the tyre can be obtained by using the following formula:
P1/T1 = P2/T2
20000 / 296 = P2 /307
Cross multiply
296 × P2 = 20000 × 307
Divide both side by 296
P2 = (20000 × 307) /296
P2 = 20743.24 Nm¯²
Therefore, the new pressure of the tyre is 20743.24 Nm¯²
A car travels 14 km due west, then does a
U-turn, and travels 43 km due west.
I. What total distance has the car
traveled?
II.
What is the total displacement of the
car?
III. If the entire trip took 3.20 hours.
determine the average speed of the
car. Give
your answer in both
km hour, and m s. (show
conversion)
IV. If the entire trip took 2.50 hours.
determine the average velocity of
the car. Give your answer in both
km h, and mph (show conversion)
Explanation:
It is given that,
A car travels 14 km due west, then does a U-turn and travels 43 km due east (when it takes U-turn, it will change direction from west to east)
i. Total distance = total path covered
= 14 km + 43 km
= 57 km
ii. Let east is positive and west is negative.
Displacement = final position-initial position
= 43-14
= 29 km
iii. If time taken in the entire trip = 3.2 hours
Average speed = distance/time
[tex]s=\dfrac{57\ km}{3.2\ h}\\\\=17.81\ km/h[/tex]
1 km/h = 0.2777 m/s
17.81 km/h = 4.94 m/s
iv. If time taken in the entire trip = 2.5 hours
Average velocity = displacement/time
[tex]v=\dfrac{29\ km}{2.5\ h}\\\\=11.6\ km/h[/tex]
1 km/h = 0.621 mph
11.6 km/h = 7.2 mph
Henc, this is the required solution.
Karla Ayala pulls a sled on an icy road (dangerous!). Because of Karla's pull, the tension force is 151 N, and the rope makes a 20.0° with the horizontal. If the 7.0-kg sled is pulled across 10.0 meters, what is the work done by Karla?
Answer:
W = 1418.9 J = 1.418 KJ
Explanation:
In order to find the work done by the pull force applied by Karla, we need to can use the formula of work done. This formula tells us that work done on a body is the product of the distance covered by the object with the component of force applied in the direction of that displacement:
W = F.d
W = Fd Cosθ
where,
W = Work Done = ?
F = Force = 151 N
d = distance covered = 10 m
θ = Angle with horizontal = 20°
Therefore,
W = (151 N)(10 m) Cos 20°
W = 1418.9 J = 1.418 KJ
what polarity must the red tip of the compass needle be since it points toward the south pole of the magnet?
Answer: positive
Explanation: because opposites attract and north=positive and south=negative the answer should be positive.
The polarity of the red tip of the compass needle must be at the north of the earth, since it points toward the south pole of the magnet.
What is meant by polarity of a magnet ?Polarity of a magnet is defined as the orientation of both the north and south poles of the magnet in space.
Here,
We know that, the opposite poles attract.
The magnetic needle is arranged in a such a way that, the red tip of the magnetic compass needle is actually pointing towards the geographic north pole of the earth.
In order to point the compass needle towards the magnetic south pole, the south pole of the magnet must be located in the geographic north pole.
Hence,
The polarity of the red tip of the compass needle must be at the north of the earth, since it points toward the south pole of the magnet.
To learn more about polarity of magnet, click:
https://brainly.com/question/15329793
#SPJ2
A red 120 kg bumper car moving at 4 m/s collides with a green 100 kg bumper car moving at 3 m/s. The red bumper car bounces off at 2 m/s. What is the green car's final velocity?
