when combined, solutions of silver nitrate and hydroiodic acid produce a precipitate. what are the spectator ions in this reaction?

The actual absolute zero temperature in degrees Celsius is 273.15.

Experimental Value of Absolute Zero for Sample 1: -283.6°C

Percent Error for Sample 1: |(-283.6 - (-273.15)) / (-273.15)| x 100 = 3.8%

Experimental Value of Absolute Zero for Sample 2: -288.7°C

Percent Error for Sample 2: |(-288.7 - (-273.15)) / (-273.15)| x 100 = 5.7%

Using Sample 1:

P = 1.2 atm

V = 22.0 mL

n = (P * V) / (R * T)

n = (1.2 * 0.0220) / (0.0821 * (12+273))

n = 0.00075 mol

Using Sample 2:

P = 1.2 atm

V = 20.0 mL

n = (P * V) / (R * T)

n = (1.2 * 0.0200) / (0.0821 * (12+273))

n = 0.00069 mol

Conclusion:

The experimental absolute zero value for Sample 1 was -283.6°C with a percent error of 3.8% and for Sample 2 was -288.7°C with a percent error of 5.7%. The experimental absolute zero values were close to the accepted value of -273.15°C, with Sample 1 being closer than Sample 2. Therefore, the data supports the hypothesis that the relationship between volume and temperature of an ideal gas can be used to determine absolute zero.

Possible sources of error that could have impacted the results of this lab include experimental error in measuring the volume and temperature, as well as deviations from ideal gas behavior due to factors such as intermolecular forces.

The investigation can be explored further by testing the effects of changes in pressure and number of moles on the relationship between volume and temperature in ideal gases.

To know more about intermolecular forces, visit:

https://brainly.com/question/9007693

#SPJ1

The type of mixture whose components are evenly distributed throughout is a homogeneous mixture.

A homogeneous mixture is a mixture in which the components are uniformly distributed throughout. The mixture appears to be the same throughout, and it has the same physical and chemical properties throughout. The composition of the components of a homogeneous mixture is uniform. An example of a homogeneous mixture is a solution of sugar and water. Sugar dissolves in water to form a homogeneous mixture. Another example is salt and water. Salt dissolves in water to form a homogeneous mixture.

However, These are the kinds of combinations where the ingredients are evenly dispersed throughout. In other words, "they are consistent throughout. In a homogenous mixture, we can only see one phase of the substance and components are evenly distributed throughout .

To know more about Homogenous mixture please visit:

https://brainly.com/question/20956879

#SPJ11

The pH of 0.1 M ethanol is higher than the pH of 0.1 M acetic acid is because ethanol is a neutral molecule while acetic acid is a weak acid.

The pH of 0.1 M ethanol is higher than the pH of 0.1 M acetic acid because ethanol is a neutral molecule and does not donate or accept protons, while acetic acid is a weak acid that can donate a proton to water, creating hydronium ions (H₃O⁺) and decreasing the pH.

Here are the structures of ethanol and acetic acid to support this explanation:

Ethanol (CH₃CH₂OH):

   H H  

    |   |

H-C-C-OH

    |   |

   H H

Acetic Acid (CH₃COOH):
   H O
    |   ||
H-C-C-O-H
    |
   H

In acetic acid, the carboxylic acid group (-COOH) can donate a proton (H⁺) to water, which increases the concentration of hydronium ions (H₃O⁺) in the solution, leading to a lower pH:

CH₃COOH + H₂O → CH₃COO⁻ + H₃O⁺

Ethanol, on the other hand, does not have an acidic hydrogen and will not donate protons to water, so its pH remains neutral (pH around 7).

To know more about pH:

https://brainly.com/question/3649733

#SPJ11

The atmosphere, which is represented by Area 1, is the main source of nitrogen on Earth. About 78% of the Earth's atmosphere is made up of nitrogen gas (N2), which is essential to numerous industrial and biological processes.

Sadly, I am unable to give a precise response without access to the question's referenced illustration. I can, however, give some general knowledge about the nitrogen cycle and the various nitrogen reserves on Earth.

The environment contains nitrogen, an element that is necessary for life, in a variety of forms, including nitrogen gas (N2), ammonia (NH3), nitrite (NO2), nitrate (NO3-), and organic nitrogen. A number of biological and chemical mechanisms are used in the nitrogen cycle to change nitrogen's form and transfer it through various reservoirs.

The atmosphere, which contains around 78% nitrogen gas, is the planet's biggest source of nitrogen. Unfortunately, most organisms cannot access atmospheric nitrogen directly; instead, it must be transformed into a useful form through  nitrogen fixation. Nitrogen fixation is the process of converting atmospheric nitrogen into ammonia or other organic nitrogen compounds, which can be taken up by plants and other organisms.

learn more about nitrogen gas  here:

https://brainly.com/question/11426882

#SPJ4

The net ionic equation for the reaction between [tex]Ba(OH)_2(aq) and H_2SO_^4 (aq)  is :2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex]

When the following two solutions are mixed:

[tex]K_2CO_3(aq) + Fe(NO_3)_3(aq)[/tex], the mixture contains the following ions:

[tex]NO_3- (aq), Fe^3+, CO_3^ 2-, K^+[/tex]. The spectator ions are NO3- (aq) and K+, and the ions that react are Fe3+ and CO3 2-.

Hence , The correct net ionic equation, including all coefficients, charges, and phases, for the reactants [tex]Ba(OH)_2(aq) + H_2SO_4(aq) [/tex] is 2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex] .
To know more about Ionic equation refer here :

https://brainly.com/question/11510759

#SPJ11

Al(NO3)3 solution concentration and the concentration of H3O+ ions in the solution following the addition of HNO3 are given in the problem. We can determine the presence of [Al(H2O)5(OH)2+] in the solution using this knowledge along with the known equilibria for the hydrolysis of Al3+.

For Al3+, the hydrolysis process may be expressed as follows:

Al(H2O)63+ + water becomes Al(H2O)5(OH)2+ + H3O+.

The reaction's equilibrium constant expression is as follows:

Al(H2O)5(OH)2+) = K

Al(H2O)63+ / [H3O+]

We must take into account the dissociation of Al(NO3)3 in water in order to determine [Al(H2O)5(OH)2+] in a 0.15 M solution of Al(NO3)3:

Al3+ (aq) + 3NO3- Al(NO3)3 (s) (aq)

Al3+ has a concentration of 0.45 M (3 times that of the Al(NO3)3 solution) in an Al(NO3)3 solution with a concentration of 0.15 M. H3O+ is present in the solution at a concentration of 0.10 M.

learn more about Al(NO3)3 solution here:

https://brainly.com/question/14215622

#SPJ4

D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.

The process of distillation involves heating the alcohol-containing solution, gathering the vapours, and then condensing them back into liquid form.

According to their boiling points, liquids are separated and purified using the distillation process. When it comes to alcohol, the solution is heated until the alcohol evaporates into a vapour, which is then collected and condensed back into a liquid state. A highly concentrated alcohol solution is produced as a result of this procedure, which enables the separation of the alcohol from other elements in the solution.

Alcoholic drinks including whisky, vodka, gin, and rum are made by distillation.

In the chemical industry, distillation is used to separate and purify various compounds and solvents.

In the process of refining petroleum, distillation is used to separate crude oil into several products, including gasoline, diesel, and kerosene.

Learn more about Distillation here:

brainly.com/question/29037176

#SPJ4

Answer:

chelated zinc is more easily absorbed than zinc on it's own.

The density of the gas at 84° C and 721 mm Hg will be 2.50 g/L.

The density of a gas can be calculated using the following formula:

Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)

Where, Density is the density of the gas in grams per liter. Pressure is the pressure of the gas in millimeters of mercury (mm Hg). Molar mass is the molar mass of the gas in grams per mole. Gas constant is the universal gas constant (0.08206 L atm / mole K). Temperature is the temperature of the gas in kelvin (K).

Now, let's find the density of the gas at 34° C and 745 mm Hg. The temperature should be converted from Celsius to Kelvin. Temperature (K) = 34 + 273 = 307 K

Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)

Density = (745 x Molar Mass) / (0.08206 x 307)

Density = 28.91 x Molar Mass g/L

Also, we need to find the molar mass of the gas. Since we don't know which gas it is, we'll use the formula,

Molar Mass = Density x (Gas Constant x Temperature) / Pressure

Molar Mass = 1.87 x (0.08206 x 307) / 745

Molar Mass = 0.103 g/mol

Now, we can find the density of the gas at 84° C and 721 mm Hg.

Temperature (K) = 84 + 273 = 357 K

Density = (Pressure x Molar Mass) / (Gas Constant x Temperature)

Density = (721 x 0.103) / (0.08206 x 357)

Density = 2.50 g/L

Therefore, the density of the gas at 84° C and 721 mm Hg will be 2.50 g/L.

To know more about density, refer here:

https://brainly.com/question/12022043#

#SPJ11

If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction, then the reaction will proceed towards the right, i.e., in the direction of the products. The correct option is (b).

This is because the forward reaction is favored over the reverse reaction as there is less number of products present, and the system tends to minimize the stress caused by an increase in the number of reactants. Here, stress refers to the difference between Q and K.

In other words, if Q < K, then the system has less number of products than it should at equilibrium. Hence, the reaction proceeds in the forward direction to increase the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.

In contrast, if Q > K, then the system has more products than it should be at equilibrium. Hence, the reaction proceeds in the reverse direction to decrease the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.

Therefore, option (b) is the correct answer. The reaction will proceed to the right (product side) if Q is smaller than K.

To know more about equilibrium constant, refer here:

https://brainly.com/question/15118952#

#SPJ11

To eject electrons with 2.2 x 10^-19 J of energy is 1.42 x 10^15 Hz.

what is the photon frequency needed? Chromium metal has a binding energy of 7.21 x 10^-19 J for certain electrons. So, the energy needed to eject the electrons is: Energy needed = Binding energy + Ejected electrons' energy = 7.21 x 10^-19 J + 2.2 x 10^-19 J = 9.41 x 10^-19 JNow, we know the energy needed to eject electrons is 9.41 x 10^-19 J. And we know that the energy of a photon is given by E = hν, where h is Planck's constant and ν is the frequency of the photon. To find the photon frequency needed, we can use the equation:

E = hνν = E/hν = (9.41 x 10^-19 J) / (6.63 x 10^-34 J·s)ν = 1.42 x 10^15 Hz

Hence, the photon frequency needed to eject electrons with 2.2 x 10^-19 J of energy is 1.42 x 10^15 Hz.

Learn more about photon frequency  at brainly.com/question/30107923

#SPJ4

The advantage of using saturated sodium chloride solution in the extraction of benzoic acid is that it helps to separate benzoic acid from other components in a solution due to its high solubility.

Extraction refers to the process of separating a particular compound from a mixture using a solvent. It's used to purify compounds, remove impurities, or separate two different compounds.

Benzoic acid is a white crystalline solid that can be extracted from benzoin or benzene, and it has a range of applications.

Sodium chloride is a common reagent used in the extraction of benzoic acid.

The isotonic nature makes it useful as a reagent for the separation of organic and aqueous layers. It causes the organic phase to separate easily:

Thus, overall, the use of saturated sodium chloride solution can help to improve the efficiency of the extraction process, allowing for better separation of the organic compound from the aqueous layer.

Learn more about the extraction of benzoic acid here:

brainly.com/question/28692026

#SPJ11

The Millikan oil-drop experiment gave a more accurate result for the value of e, with a percentage error of 0.002%. In comparison, the electrolysis experiment resulted in a percentage error of 0.06%.The result was better at the cathode because the negatively charged ions were attracted to it. Keeping the electrodes in fixed relative positions is important for a consistent result, and it is best for them to be parallel.

1. Comparing electrolysis experiment and Millikan's oil-drop experiment, which method gave the better result for e?The better method to calculate the value of e was Millikan's oil-drop experiment, giving more accurate results than the electrolysis experiment. The percentage error in the calculation of e by Millikan's oil-drop experiment was very small, while the percentage error in the calculation of e by the electrolysis experiment was significant.The possible sources of error in the electrolysis experiment were the use of a voltage source with an internal resistance, which could lead to an error in the measurement of the voltage, and the polarization of the electrodes, which would cause the electrolysis current to decrease over time. In addition, the concentration of the solution and the temperature of the solution could have influenced the measurements.  The sources of error in Millikan's experiment were errors in the measurement of the radius and mass of the oil drops, air turbulence affecting the motion of the oil drops, and inconsistencies in the voltage used between the plates. 2. Which electrode gave better results in the electrolysis experiment?The cathode provided a better result than the anode. Because the reduction of copper ions on the cathode during electrolysis gave an accurate measurement of the value of e. 3. Why should the electrodes be kept in fixed relative positions during the electrolysis?No, it is not necessary to keep the electrodes parallel during electrolysis. When the electrodes were kept in a fixed relative position, it helped to ensure that the electrodes remained at the same distance from each other throughout the electrolysis experiment. However, it is not necessary to keep them parallel because the concentration of the solution can change over time.The second electrolysis was more accurate than the first one. It is because we obtained the desired result, i.e., 3.3 x 10^{-19} C. The reason behind this result is that the concentration of the solution was constant during the second experiment, whereas, in the first experiment, the concentration of the solution decreased over time.

For more such questions on Millikan oil-drop

https://brainly.com/question/14780949

#SPJ11

The extrinsic pathway of coagulation is initiated by the exposed endothelial collagen. Endothelial cells are cells that line the interior surface of blood vessels, forming a barrier between the blood and the underlying tissues. Collagen is a protein that is an important component of the extracellular matrix that supports and strengthens tissues throughout the body.

The interaction of tissue factor with factor VIIa (the activated form of factor VII) triggers a series of reactions that ultimately lead to the activation of factor X and the formation of a blood clot. This process involves the formation of a complex known as the extrinsic tenase complex, which includes tissue factor, factor VIIa, calcium ions, and phospholipids. The extrinsic tenase complex activates factor X, which then leads to the activation of thrombin and the subsequent formation of fibrin, the protein that forms the basis of a blood clot.

The extrinsic pathway is called the "extrinsic" pathway because it is initiated by factors that are external to the blood itself, namely tissue factor. In contrast, the intrinsic pathway of coagulation is initiated by factors that are present within the blood itself, such as platelets and activated factor XII.

Overall, the extrinsic pathway of coagulation is an important component of the body's response to tissue injury, and it plays a critical role in preventing excessive bleeding and promoting wound healing.

Learn more about coagulation here brainly.com/question/8888375

#SPJ4

Ion channels that open and close in response to a change in membrane potential are called voltage-gated ion channels.

Voltage-gated ion channels are a specialized type of membrane protein that are embedded in the lipid bilayer of excitable cells. They have a pore that allows ions to flow through, and they can be selective for different types of ions, such as sodium (Na+), potassium (K+), or calcium (Ca2+).

The opening and closing of the channel's pore is controlled by changes in the membrane potential, which is the difference in electrical charge across the cell membrane.

These channels are crucial for the generation and propagation of electrical signals in excitable cells, such as neurons and muscle cells. Voltage-gated ion channels are capable of detecting small changes in membrane potential and responding by opening or closing their pore, allowing ions to flow across the membrane and alter the electrical state of the cell.

Learn more about ion channels here: https://brainly.com/question/12578279

#SPJ1

(i).The mass of ammonia produced is 2.43 x 10^3 g. (ii) The 71.4 moles of dinitrogen react with 214.2 moles of dihydrogen to produce 142.8 moles of ammonia. (iii) Mass of ammonia produced in given reaction with 1 gram of dinitrogen and 3 grams of dihydrogen is 1.22 g.

Using the given masses of dinitrogen and dihydrogen, we can calculate moles of each:

dinitrogen = mass/molar mass = 2.00 x 10^3 g/28 g/mol = 71.4 mol,

dihydrogen = mass/molar mass = 1.00 x 10^3 g/2 g/mol = 500 mol

The mass of ammonia produced can be calculated as:

[tex]Mass of ammonia = moles * molar mass = 142.8 mol * 17 g/mol = 2.43 * 10^{3 }g[/tex]

Therefore, the mass of ammonia produced is 2.43 x 10^3 g.

We can calculate the mass of ammonia produced using the equation:

[tex]mass = number of moles * molar mass = 2 * 0.0356 * 17.03 = 1.22 g[/tex]

To know more about dinitrogen, here

brainly.com/question/9909261

#SPJ4

Answer:

Cobalt, Nickel, Chromium, and Copper

Approximately 5.78 grams of glucose must be consumed to sustain a power output of 25 W for one hour.

Power = Energy/Time

25 W = Energy/3600 s

Energy = 25 W x 3600 s = 90000 J

C6H12O6 + 6O2 → 6CO2 + 6H2O + energy

The energy produced by the complete oxidation of glucose is approximately 2.8 x 10^6 J/mol. Therefore, to produce 90,000 J of energy, we need to divide 90,000 J by the energy produced per mole of glucose:

90,000 J / (2.8 x 10^6 J/mol) = 0.0321 mol

The molar mass of glucose is approximately 180 g/mol. Therefore, the mass of glucose required to sustain a power output of 25 W for one hour is:

0.0321 mol x 180 g/mol = 5.78 g

Power in physics is defined as the rate at which work is done or energy is transferred. It is a scalar quantity that measures how quickly a certain amount of energy is being transferred or converted from one form to another. The standard unit for power is the watt (W), which is equivalent to one joule per second (J/s).

In more mathematical terms, power is given by the formula P = W/t, where P represents power, W represents work, and t represents time. Power is also related to force and velocity through the equation P = Fv, where F represents force and v represents the velocity.

Power is an important concept in physics and engineering, as it is used to describe the performance of machines, engines, and other energy conversion systems. The greater the power of a system, the more work it can do in a given amount of time, and the faster it can accomplish a task.

To learn more about Power visit here:

brainly.com/question/13937812

#SPJ4

Answer: -230 N

Explanation:

The electrical force between two point charges q1 and q2 separated by a distance r is given by Coulomb's law:

F = k * (q1 * q2) / r^2

where k is the Coulomb constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.

In this case, we have a positive charge and a negative charge, which means that q1 and q2 have opposite signs. Let's assume that the positive charge has a magnitude of q and the negative charge has a magnitude of -q. Then, the electrical force between them can be calculated as:

F = k * (q * (-q)) / r^2 = -k * q^2 / r^2

Substituting the given values of e and k, we get:

F = - (8.99 × 10^9 N m^2/C^2) * (1.6 × 10^-19 C)^2 / (10^-15 m)^2 ≈ -230 N

Note that the negative sign indicates that the force is attractive, which is expected for opposite charges. Therefore, the correct answer is:

-230 N.

The pH of a solution prepared from 0.201 mol/L of NH4CN and enough water to make 1.00 L of solution is 4.24.

To calculate the pH of this solution, you first need to calculate the concentration of H+ ions in the solution. You can do this by using the following equation:

H+ (mol/L) = [NH4CN]2 x 10-10

Using the given information, the concentration of H+ ions in the solution is:

H+ (mol/L) = [0.201 mol/L]2 x 10-10 = 4.04 x 10-5 mol/L

You can then calculate the pH of the solution using the following equation:

pH = -log10(H+)

Using the concentration of H+ ions, the pH of the solution is:

pH = -log10(4.04 x 10-5) = 4.24

Therefore, the pH of a solution prepared from 0.201 mol/L of NH4CN and enough water to make 1.00 L of solution is 4.24.

Learn more about pH: https://brainly.com/question/26424076

#SPJ11

Electrons have a negative electrical charge, whereas protons have a positive charge.

Subatomic particles like electrons and protons are essential in defining how atoms and molecules behave. Electrons are negatively charged particles that move in shells or energy levels around an atom's nucleus. The positive charge of protons and the negative charge of electrons are identical in magnitude but diametrically opposed in sign. Together with neutral neutrons, protons are positively charged particles that make up an atom's nucleus. An atom's proton count establishes the element it belongs to. Atoms' chemical activity, particularly their capacity to form chemical bonds and reactions, is greatly influenced by the charges of their protons and electrons.

learn more about Subatomic particles here:

https://brainly.com/question/29765133

#SPJ4

The percent error of your experimentally determined density is that is an error of 2.53%.

It can be calculated using the following equation:  Error % = (Experimentally Determined Value - Known Value)/Known Value x 100. So in your case, the equation would look like: Error % = (2.03 g/l - 1.98 g/l)/1.98 g/l x 100

This gives us an error of 2.53%.
The given value of density of CO2 is 2.03 g/L and the actual value of density of CO2 is 1.98 g/L. The percent error can be calculated using the below formula: Percent error = (|experimental value - actual value|/actual value) × 100Therefore, the percent error of experimentally determined density is Percent error = (|2.03 g/L - 1.98 g/L|/1.98 g/L) × 100= (0.05 g/L/1.98 g/L) × 100= 2.53%Thus, the percent error of the experimentally determined density is 2.53%.

Read more about density:

https://brainly.com/question/1354972

#SPJ11

According to the given options, option "II only" will increase the pH of an H2CO3/HCO+3 buffer solution.

Buffer solution- A buffer solution is a solution that resists changes in pH when small amounts of an acid or a base are added to it.

H2CO3/HCO+3 buffer- A buffer that consists of a weak acid and its conjugate base is known as an acid-buffer or a weak acid-buffer. For example, carbonic acid (H2CO3) and bicarbonate (HCO3−) are combined in a buffer solution that has a weak acid (H2CO3) and its conjugate base (HCO3−). Carbonic acid (H2CO3) and bicarbonate (HCO3−) are combined in a buffer solution that has a weak acid (H2CO3) and its conjugate base (HCO3−).

The chemical equation for the carbonic acid-bicarbonate buffer is:

H2CO3 ⇌ H+ + HCO3−

This reaction shows that the buffer solution contains both carbonic acid (H2CO3) and bicarbonate (HCO3−) ions. H+ and HCO3− ions are formed when carbonic acid (H2CO3) dissociates in water (H2O).

Increasing the pH of a buffer solution- The pH of a buffer solution can be increased by adding a strong base, which would react with the buffer's weak acid to form its conjugate base. In this scenario, sodium bicarbonate (NaHCO3) is a strong base.

Therefore, option "II only" is the correct answer.

To learn more about "buffer solution", visit: https://brainly.com/question/8676275

#SPJ11

There are 4 chirality centers in an aldohexose. The correct answer is option b.

Aldohexoses are six-carbon monosaccharides with a carbonyl functional group (aldehyde group) and five other carbon atoms, each of which is associated with an alcohol functional group in their straight-chain form. The carbonyl carbon, which is referred to as the anomeric carbon, determines the stereochemistry and the cyclic form of aldohexoses.

Chirality centers are carbon atoms that have four distinct substituents bonded to them, resulting in the ability to exist as stereoisomers. These stereoisomers are mirror images of each other and cannot be superimposed upon each other.Therefore, it is important to count the number of chirality centers present in the aldohexose structure.

There are four chirality centers in aldohexose, which are present at carbon atoms 2, 3, 4, and 5.

For more such questions on chirality centers, click on:

https://brainly.com/question/9522537

#SPJ11

The equilibrium shift when the concentration of H2 (gas) is increased by adding more hydrogen gas to the container at constant temperature is towards the right side of the reaction equation.

Let us understand how the reaction shifts with the help of the following chemical reaction equation. N2(g) + 3H2(g) ⇌ 2NH3(g).

Adding more H2 gas to the container at constant temperature will increase the concentration of H2 gas.

The reaction will shift towards the product side (right side of the reaction equation) to balance the reaction equation.

The concentration of NH3 gas will increase, and the concentration of N2 gas and H2 gas will decrease.

The reaction quotient (Qc) is used to predict the direction of the reaction.

If Qc is greater than Kc, the reaction shifts towards the left side of the reaction equation.

If Qc is less than Kc, the reaction shifts towards the right side of the reaction equation.

.f Qc is equal to Kc, the reaction is at equilibrium state with no shift in the reaction.

For more information about equilibrium shift refer here

https://brainly.com/question/15164034?

#SPJ11

The standard reduction potential of the cathode half-reaction is -0.36V,

The standard reduction potential of the anode half-reaction is +0.34V,

and the standard potential of the cell is -0.02V.

The cathode half-reaction is the reduction of iron (Fe²⁺) to iron (Fe):

Fe²⁺ + 2e⁻ -> Fe; E°cathode = -0.36V.

The anode half-reaction is the oxidation of copper (Cu) to copper (Cu²⁺):

Cu -> Cu²⁺ + 2e⁻; E°anode = +0.34V.
The standard potential of the cell is determined by subtracting the standard reduction potential of the anode from the standard reduction potential of the cathode:

E°cell = E°cathode - E°anode

= -0.36V - (+0.34V)

= -0.02V.

Learn more about the standard potential of the cell here:

https://brainly.com/question/19036092

#SPJ11

Answer:

To calculate the molarity of a calcium carbonate (CaCO3) solution, we first need to convert the volume of water from milliliters (mL) to liters (L).

Volume of water = 125 mL = 0.125 L

Next, we need to use the number of moles of CaCO3 and the volume of water to calculate the molarity:

Molarity = number of moles / volume of solution

Molarity = 2.00 mol / 0.125 L

Molarity = 16.0 M

Therefore, the molarity of the calcium carbonate solution is 16.0 M. However, it's important to note that this concentration is not physically possible as the solubility of calcium carbonate in water is relatively low. Therefore, it's likely that the amount of calcium carbonate that actually dissolves in 125 mL of water is much less than 2.00 moles, making the actual molarity much lower.

(Please could you kindly mark my answer as brainliest)

Answer:

Diborane, B2H6, is a useful reagent in organic chemistry. One of the several ways it can be prepared is by the following reaction 2 NaBH4(aq) H2SO4(aq) 2 H2 (g) + Na2SO4(aq) + B2H6(g) What volume of 0.0915 M H2SO4, in milliliters, should be used to consume completely 1.35 g of NaBH4? mL 200 What mass of B2H6 can be obtained? 0.51

Explanation:

hope its help

None of the available choices have as many molecules as 1 L of STP-produced C2H4 gas.

At STP (Standard Temperature and Pressure), which is defined as a temperature of 273.15 K and a pressure of 1 atmosphere, the volume of a gas is directly proportional to the number of molecules present. This means that if we have two gases at STP with the same volume, they must contain the same number of molecules.

For a gas with a given volume, the number of molecules present can be calculated using the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

To determine which gas has the same number of molecules as 1 L of C2H4 gas, we need to calculate the number of moles of C2H4 present in 1 L of C2H4 gas. The molar volume of any gas at STP is 22.4 L/mol.

The molar mass of C2H4 is 28.05 g/mol, so 1 L of C2H4 gas at STP contains:

n = m/M = 1000 g / 28.05 g/mol = 35.6 mol

Therefore, 1 L of C2H4 gas contains 35.6 moles of C2H4.

(a) For 0.5 L of H2 gas, the number of moles present is:

n = PV/RT = (1 atm x 0.5 L) / (0.0821 L atm/mol K x 273.15 K) = 0.0207 mol

Since 0.0207 mol is less than 35.6 mol, 0.5 L of H2 gas has fewer molecules than 1 L of C2H4 gas.

(b) For 1 L of Ne gas, the number of moles present is:

n = PV/RT = (1 atm x 1 L) / (0.0821 L atm/mol K x 273.15 K) = 0.0409 mol

Since 0.0409 mol is less than 35.6 mol, 1 L of Ne gas has fewer molecules than 1 L of C2H4 gas.

(c) For 2 L of H2O gas, the number of moles present is:

n = PV/RT = (1 atm x 2 L) / (0.0821 L atm/mol K x 273.15 K) = 0.082 mol

Since 0.082 mol is less than 35.6 mol, 2 L of H2O gas has fewer molecules than 1 L of C2H4 gas.

(d) For 3 L of Cl2 gas, the number of moles present is:

n = PV/RT = (1 atm x 3 L) / (0.0821 L atm/mol K x 273.15 K) = 0.123 mol

Since 0.123 mol is less than 35.6 mol, 3 L of Cl2 gas has fewer molecules than 1 L of C2H4 gas.

Therefore, none of the given options have the same number of molecules as 1 L of C2H4 gas at STP.

To learn more about  molecules refer to:

brainly.com/question/14646440

#SPJ4