When expressions of the form (x −r)(x − s) are multiplied out, a quadratic polynomial is obtained. For instance, (x −2)(x −(−7))= (x −2)(x + 7) = x2 + 5x − 14.
a. What can be said about the coefficients of the polynomial obtained by multiplying out (x −r)(x − s) when both r and s are odd integers? when both r and s are even integers? when one of r and s is even and the other is odd?
b. It follows from part (a) that x2 − 1253x + 255 cannot be written as a product of two polynomials with integer coefficients. Explain why this is so.

Answers

Answer 1

a.(1) When both r and s are odd integers, the quadratic polynomial obtained by multiplying out (x - r)(x - s) will have a coefficient of 1 for x^2 term, and both the coefficient of x term and constant term will be odd integers.

(2) When both r and s are even integers, the polynomial obtained by multiplying out (x - r)(x - s) will also have a coefficient of 1 for x^2 term, but the coefficient of x term and constant term will be even integers.

(3) When one of r and s is even and the other is odd, the polynomial obtained by multiplying out (x - r)(x - s) will have a coefficient of 1 for x^2 term, the coefficient of x term will be an odd integer, while the constant term will be an even integer.

b. x^2 - 1253x + 255 cannot be written as a product of two polynomials with integer coefficients.

a. When both r and s are odd integers, the product (x − r)(x − s) will have a coefficient of 1 for x^2 term, and both the coefficient of x term and constant term will be odd integers. This is because the sum of two odd integers and the product of two odd integers is also an odd integer.

When both r and s are even integers, the product (x − r)(x − s) will also have a coefficient of 1 for x^2 term, but the coefficient of x term and constant term will be even integers. This is because the sum of two even integers and the product of two even integers is also an even integer.

When one of r and s is even and the other is odd, the product (x − r)(x − s) will have a coefficient of 1 for x^2 term, and the coefficient of x term will be an odd integer, while the constant term will be an even integer. This is because the sum of an odd and even integer is an odd integer, and the product of an odd and even integer is an even integer.

b. If x^2 - 1253x + 255 can be written as a product of two polynomials with integer coefficients, then we can write it as (x - r)(x - s) where r and s are integers. From part (a), we know that both r and s cannot be odd integers since the coefficient of x term would be odd, but 1253 is an odd integer. Similarly, both r and s cannot be even integers since the constant term would be even, but 255 is an odd integer. Therefore, one of r and s must be odd and the other must be even. However, the difference between an odd integer and an even integer is always odd, so the coefficient of x term in the product (x - r)(x - s) would be odd, which is not equal to the coefficient of x term in x^2 - 1253x + 255. Hence, x^2 - 1253x + 255 cannot be written as a product of two polynomials with integer coefficients.

Learn more about quadratic polynomial here

brainly.com/question/28988445

#SPJ4


Related Questions

Samir bought three pounds of strawberries for $12.00. What is the price, in dollars
per ounce of strawberries?
1 pound = 16 ounces
Before you try that problem, answer the question below.
How many ounces of strawberries did Samir buy?

Answers

Samir bought 48 ounces of strawberries (3 pounds x 16 ounces per pound = 48 ounces).
To find the price per ounce, we can divide the total cost by the number of ounces:
$12.00 ÷ 48 ounces = $0.25 per ounce.
Therefore, Samir paid $0.25 for each ounce of strawberries he bought.

The roots of a quadratic equation a x +b x +c =0 are (2+i √2)/3 and (2−i √2)/3 . Find the values of b and c if a = −1.

Answers

[tex]\begin{cases} x=\frac{2+i\sqrt{2}}{3}\implies 3x=2+i\sqrt{2}\implies 3x-2-i\sqrt{2}=0\\\\ x=\frac{2-i\sqrt{2}}{3}\implies 3x=2-i\sqrt{2}\implies 3x-2+i\sqrt{2}=0 \end{cases} \\\\\\ \stackrel{ \textit{original polynomial} }{a(3x-2-i\sqrt{2})(3x-2+i\sqrt{2})=\stackrel{ 0 }{y}} \\\\[-0.35em] ~\dotfill[/tex]

[tex]\stackrel{ \textit{difference of squares} }{[(3x-2)-(i\sqrt{2})][(3x-2)+(i\sqrt{2})]}\implies (3x-2)^2-(i\sqrt{2})^2 \\\\\\ (9x^2-12x+4)-(2i^2)\implies 9x^2-12x+4-(2(-1)) \\\\\\ 9x^2-12x+4+2\implies 9x^2-12x+6 \\\\[-0.35em] ~\dotfill\\\\ a(9x^2-12x+6)=y\hspace{5em}\stackrel{\textit{now let's make}}{a=-\frac{1}{9}} \\\\\\ -\cfrac{1}{9}(9x^2-12x+6)=y\implies \boxed{-x^2+\cfrac{4}{3}x-\cfrac{2}{3}=y}[/tex]

Write a sine function that has a midline of, y=5, an amplitude of 4 and a period of 2.

Answers

Answer:

y = 4 sin(π x) + 5

Step-by-step explanation:

A sine function with a midline of y=5, an amplitude of 4, and a period of 2 can be written in the following form:

y = A sin(2π/ x) +

where A is the amplitude, is the period, is the vertical shift (midline), and x is the independent variable (usually time).

Substituting the given values, we get:

y = 4 sin(2π/2 x) + 5

Simplifying this expression, we get:

y = 4 sin(π x) + 5

Therefore, the sine function with the desired characteristics is:

y = 4 sin(π x) + 5

In a certain region of space the electric potential is given by V=+Ax2y−Bxy2, where A = 5.00 V/m3 and B = 8.00 V/m3.1) Calculate the magnitude of the electric field at the point in the region that has cordinates x = 1.10 m, y = 0.400 m, and z = 0.2)Calculate the direction angle of the electric field at the point in the region that has cordinates x = 1.10 m, y = 0.400 m, and z = 0.( measured counterclockwise from the positive x axis in the xy plane)

Answers

The direction angle of the electric field at the point (x = 1.10 m, y = 0.400 m, z = 0) is approximately 74.5 degrees clockwise from the positive x-axis in the xy plane.

To calculate the electric field at the point (x = 1.10 m, y = 0.400 m, z = 0), we need to take the negative gradient of the electric potential V:

E = -∇V

where ∇ is the del operator, which is given by:

∇ = i(∂/∂x) + j(∂/∂y) + k(∂/∂z)

and i, j, k are the unit vectors in the x, y, and z directions, respectively.

To calculate the magnitude of the electric field at the point, we first need to find the partial derivatives of V with respect to x and y:

∂V/∂x = 2Axy - By^2

∂V/∂y = Ax^2 - 2Bxy

Substituting the values of A, B, x, and y, we get:

∂V/∂x = 2(5.00 V/m^3)(1.10 m)(0.400 m) - (8.00 V/m^3)(0.400 m)^2 = 0.44 V/m

∂V/∂y = (5.00 V/m^3)(1.10 m)^2 - 2(8.00 V/m^3)(1.10 m)(0.400 m) = -1.64 V/m

Next, we can calculate the magnitude of the electric field:

E = -∇V = -i(∂V/∂x) - j(∂V/∂y) - k(∂V/∂z)

= -i(0.44 V/m) + j(1.64 V/m) + 0k

= (0.44 i - 1.64 j) V/m

The magnitude of the electric field is given by:

|E| = sqrt((0.44 V/m)^2 + (-1.64 V/m)^2) = 1.70 V/m

Therefore, the magnitude of the electric field at the point (x = 1.10 m, y = 0.400 m, z = 0) is 1.70 V/m.

To calculate the direction angle of the electric field, we need to find the angle that the electric field vector makes with the positive x-axis in the xy plane.

The angle can be found using the arctan function:

θ = arctan(Ey/Ex)

Substituting the values of Ex and Ey, we get:

θ = arctan(-1.64 V/m / 0.44 V/m) = -1.30 radians

The negative sign indicates that the direction angle is measured counter clockwise from the negative x-axis, which is equivalent to measuring clockwise from the positive x-axis.

Converting to degrees, we get:

θ = -1.30 radians * (180 degrees / pi radians) = -74.5 degrees

Therefore, the direction angle is approximately 74.5 degrees clockwise in the xy plane.

To know more about electric field:

https://brainly.com/question/14768728

#SPJ4

Which of the following random variables can be approximated to discrete distribution and continuous distribution? a. b. C. d. The wages of academician and non-academician workers in UPSI. The time taken to submit online quiz answer's document. The prices of SAMSUM mobile phones displayed at a phone shop The number of pumps at Shell petrol stations in Perak. [2 marks] 10% chance of contamination by a particular​

Answers

10% chance of contamination by a particular: It's not clear what random variable is being referred to here, but if it's the probability of contamination.

What is Distribution?

In general terms, a distribution refers to the way something is divided or spread out. In the context of statistics and probability theory, a distribution is a mathematical function that describes the likelihood of different possible outcomes or values that a variable can take.

There are various types of distributions, but some of the most commonly used ones include:

Normal distribution: also known as the Gaussian distribution, it is a continuous probability distribution that is symmetrical around the mean, with most of the data falling within one standard deviation of the mean.

Binomial distribution: this is a discrete probability distribution that describes the likelihood of a certain number of successes in a fixed number of trials.

Poisson distribution: another discrete probability distribution that describes the likelihood of a certain number of events occurring in a fixed interval of time or space.

Exponential distribution: a continuous probability distribution that describes the time between events occurring at a constant rate.

Distributions are essential in statistical analysis as they can help to understand and analyze data, make predictions, and draw conclusions about a population based on a sample of data.

Given by the question.

a. The wages of academician and non-academician workers in UPSI: This random variable can be approximated to a continuous distribution as wages can take on any numerical value within a range. However, it's worth noting that in practice, there may be discrete intervals or categories of wages, in which case a discrete distribution may be more appropriate.

b. The time taken to submit online quiz answer's document: This random variable can also be approximated to a continuous distribution as it can take on any numerical value within a range.

c. The prices of SAMSUNG mobile phones displayed at a phone shop: This random variable can be approximated to a continuous distribution as prices can take on any numerical value within a range.

d. The number of pumps at Shell petrol stations in Perak: This random variable can be approximated to a discrete distribution since the number of pumps can only take on integer values.

To learn more about function:

https://brainly.com/question/21145944

#SPJ1

Find x, if √x +2y^2 = 15 and √4x - 4y^2=6

pls help very soon

Answers

Answer:

We have two equations:

√x +2y^2 = 15 ----(1)

√4x - 4y^2=6 ----(2)

Let's solve for x:

From (1), we have:

√x = 15 - 2y^2

Squaring both sides, we get:

x = (15 - 2y^2)^2

Expanding, we get:

x = 225 - 60y^2 + 4y^4

From (2), we have:

√4x = 6 + 4y^2

Squaring both sides, we get:

4x = (6 + 4y^2)^2

Expanding, we get:

4x = 36 + 48y^2 + 16y^4

Substituting the expression for x from equation (1), we get:

4(225 - 60y^2 + 4y^4) = 36 + 48y^2 + 16y^4

Simplifying, we get:

900 - 240y^2 + 16y^4 = 9 + 12y^2 + 4y^4

Rearranging, we get:

12y^2 - 12y^4 = 891

Dividing both sides by 12y^2, we get:

1 - y^2 = 74.25/(y^2)

Multiplying both sides by y^2, we get:

y^2 - y^4 = 74.25

Let z = y^2. Substituting, we get:

z - z^2 = 74.25

Rearranging, we get:

z^2 - z + 74.25 = 0

Using the quadratic formula, we get:

z = (1 ± √(1 - 4(1)(74.25))) / 2

z = (1 ± √(-295)) / 2

Since the square root of a negative number is not real, there are no real solutions for z, which means there are no real solutions for y and x.

Therefore, the answer is "no solution".

If A = [ 1 2 4 0 5 6 ] and B= [ 7 3 2 5 1 9] find C= A+B and D=A-B

Answers

Step 1: Arrange the arrays so that A and B are in the same order: A = [ 1 2 4 0 5 6 ], B = [ 7 3 2 5 1 9]

Step 2: To find C = A+B, add each element of A and B together.

C = [1+7, 2+3, 4+2, 0+5, 5+1, 6+9]

C = [8, 5, 6, 5, 6, 15]

Step 3: To find D = A-B, subtract each element of B from A.

D = [1-7, 2-3, 4-2, 0-5, 5-1, 6-9]

D = [-6, -1, 2, -5, 4, -3]

Is the function represented by the following table linear, quadratic or exponential? ​

Answers

The function represented by the table is linear, as it has a constant rate of change and is represented by a straight line.

What is function in mathematics?

Function in mathematics is a relation between two sets, where one set is the input and the other set is the output. Functions are an important tool in mathematics and can be used to describe and model real-world phenomena. Functions take inputs, manipulate them and produce outputs. They can be used to represent relationships between two or more variables, or to represent a complex process. Functions allow us to break down complex problems into smaller, more manageable pieces and to study how changes in one variable affect other variables.

The function represented by the table is linear. It can be determined by the fact that the y-values change by the same amount every time the x-values increase by one unit. In this case, the y-values decrease by 2 each time the x-values increase by one unit. This is an example of a linear function.

Linear functions have the shape of a straight line and are characterized by having a constant rate of change. The constant rate of change is represented by the slope of the line, which in this case is -2. This means that for every one unit increase in the x-values, the y-values decrease by two.

A quadratic function is the opposite of a linear function, as it has a rate of change that is not constant. Quadratic functions are characterized by their parabolic shape and their rate of change increases as x-values increase. Exponential functions are characterized by their curved shape and increase exponentially as x-values increase.

In conclusion, the function represented by the table is linear, as it has a constant rate of change and is represented by a straight line.

To know more about function click-
https://brainly.com/question/25841119
#SPJ1

Solve please geometry, solve for x

Answers

Answer: The answer is D

Step-by-step explanation:

Pythagorean theorem: a²+b²=c²

x²+x²=14²

2x²=196

Evaluate...

x=7√2

Find the Z score that has 48.4% of the distributions area to its left.

Answers

Answer:

To find the Z-score that has 48.4% of the distribution's area to its left, we can use a standard normal distribution table or a calculator.

Using a standard normal distribution table, we can look for the closest probability value to 0.484. In the table, we find that the closest probability value is 0.4838, which corresponds to a Z-score of approximately 1.96.

Alternatively, we can use a calculator with a built-in normal distribution function. Using the inverse normal distribution function, also known as the quantile function, we can find the Z-score that corresponds to a given probability. For a probability of 0.484, we get:

To find the Z-score that has 48.4% of the distribution's area to its left, we can use a standard normal distribution table or a calculator.

Using a standard normal distribution table, we can look for the closest probability value to 0.484. In the table, we find that the closest probability value is 0.4838, which corresponds to a Z-score of approximately 1.96.

Alternatively, we can use a calculator with a built-in normal distribution function. Using the inverse normal distribution function, also known as the quantile function, we can find the Z-score that corresponds to a given probability. For a probability of 0.484, we get:

To find the Z-score that has 48.4% of the distribution's area to its left, we can use a standard normal distribution table or a calculator.

Using a standard normal distribution table, we can look for the closest probability value to 0.484. In the table, we find that the closest probability value is 0.4838, which corresponds to a Z-score of approximately 1.96.

Alternatively, we can use a calculator with a built-in normal distribution function. Using the inverse normal distribution function, also known as the quantile function, we can find the Z-score that corresponds to a given probability. For a probability of 0.484, we get:

invNorm(0.484)= 1.96

Therefore, the Z-score that has 48.4% of the distribution's area to its left is approximately 1.96.

Jenny took the car, the bus, and the train to get home in time.
What form of punctuation is missing?
O A. No punctuation is missing.
OB.
A period
OC.
A comma
OD. A semicolon

Last three times I have tried to take a picture of my question. Nothing comes up that resembles any of it. I don’t know what’s wrong with this app but it’s not helping.

Answers

According to the question. A. No punctuation is missing.

What is punctuation ?

Punctuation is the use of symbols to indicate the structure and organization of written language. It is used to help make the meaning of sentences clearer and to make them easier to read and understand. Punctuation marks can also be used to indicate pauses in speech, to create emphasis, and to indicate the speaker’s attitude. There are many different types of punctuation marks, each with its own purpose. The most commonly used punctuation marks are the period, comma, question mark, exclamation mark, quotation marks, and the apostrophe.

Quotation marks are used to enclose quoted material, while the apostrophe is used to indicate possession or to replace missing letters in a word or phrase. By using punctuation correctly, writers can ensure that their messages are correctly understood by their readers.

To learn more about punctuation

https://brainly.com/question/30321693

#SPJ1

Which expressions are equivalent to 8(3/4y - 2) + 6(-1/2x + 4) + 1

Answers

Answer:

8(3/4y - 2) + 6(-1/2x + 4) + 1 can be simplified as:

6(-1/2x) = -3x

8(3/4y) = 6y

8(-2) = -16

6(4) = 24

1 remains as 1.

So the expression becomes:

6y - 3x - 16 + 24 + 1

which simplifies to:

6y - 3x + 9

Therefore, the expressions that are equivalent to 8(3/4y - 2) + 6(-1/2x + 4) + 1 are:

6y - 3x + 9

select a random integer from -200 to 200. which of the following pairs of events re mutualyle exclusive

Answers

The pairs of events of random integers are pairs of events are,

even and odd , negative and positive integers, zero and non-zero integers.

Two events are mutually exclusive if they cannot occur at the same time.

Selecting a random integer from -200 to 200,

Any two events that involve selecting a specific integer are mutually exclusive.

For example,

The events selecting the integer -100

And selecting the integer 50 are mutually exclusive

As they cannot both occur at the same time.

Any pair of events that involve selecting a specific integer are mutually exclusive.

Here are a few examples,

Selecting an even integer and selecting an odd integer.

Selecting a negative integer and selecting a positive integer

Selecting the integer 0 and selecting an integer that is not 0.

But,

Events such as selecting an even integer and selecting an integer between -100 and 100 are not mutually exclusive.

As there are even integers between -100 and 100.

Learn more about integer here

brainly.com/question/30099746

#SPJ4

Mr. Nkalle invested an amount of N$20,900 divided in two different schemes A and B at the simple interest
rate of 9% p.a. and 8% p.a, respectively. If the total amount of simple interest earned in 2 years is N$3508,
what was the amount invested in Scheme B?

Answers

Answer:

Let's assume that Mr. Nkalle invested an amount of x in Scheme A and (20900 - x) in Scheme B.

The simple interest earned on Scheme A in 2 years would be:

SI(A) = (x * 9 * 2)/100 = 0.18x

The simple interest earned on Scheme B in 2 years would be:

SI(B) = [(20900 - x) * 8 * 2]/100 = (3344 - 0.16x)

The total simple interest earned in 2 years is given as N$3508:

SI(A) + SI(B) = 0.18x + (3344 - 0.16x) = 3508

0.02x = 164

x = 8200

Therefore, Mr. Nkalle invested N$8200 in Scheme A and N$12700 (20900 - 8200) in Scheme B. So the amount invested in Scheme B was N$12700.

For the graph, find the average rate of change on the intervals given

See attached picture

Answers

The average rate of change on the intervals [0, 3], [3, 5], [5, 7], and [7, 9] are 2, -1.5, 1, and -1.5, respectively.

What is the average rate in math?

It expresses how much the function changed per unit on average during that time period. It is computed by taking the slope of the straight line connecting the interval's endpoints on the function's graph.

To calculate the average rate of change for the intervals shown in the graph, we must first determine the slope of the line connecting the endpoints of each interval.

0-3 interval:

Because the interval's endpoints are (0, 1) and (3, 7), the slope of the line connecting them is:

slope = (y change) / (x change) = (7 - 1) / (3 - 0) = 2

pauses [3, 5]:

Because the interval's endpoints are (3, 7) and (5, 4), the slope of the line connecting them is:

slope = (y change) / (x change) = (4 - 7) / (5 - 3) = -1.5

[5–7] Interval:

Because the interval's endpoints are (5, 4) and (7, 6), the slope of the line connecting them is:

slope = (y change) / (x change) = (6 - 4) / (7 - 5) = 1

Interval 7 and 9:

Because the interval's endpoints are (7, 6) and (9, 3), the slope of the line connecting them is:

slope = (y change) / (x change) = (3 - 6) / (9 - 7) = -1.5

As a result, the average rate of change on the intervals [0, 3], [3, 5], [5, 7], and [7, 9] is 2, -1.5, 1, and -1.5.

To know more about Average Rate visit:

https://brainly.com/question/23715190

#SPJ1

For the functions f(x)=−7x+3 and g(x)=3x2−4x−1, find (f⋅g)(x) and (f⋅g)(1).

Answers

Answer:

Find f(g(x)) f(x)=7x-8 , g(x)=3x-2. f(x)=7x−8 f ( x ) = 7 x - 8 , g(x)=3x−2 g ( x ) = 3 x - 2. Step 1. Set up the composite result function. f(g(x)) f ( g ...

please mark me as a brainalist

Create a trigonometric function that models the ocean tide..
Explain why you chose your function type. Show work for any values not already outlined above.

Answers

Answer:

One possible function that models the ocean tide is:

h(t) = A sin(ωt + φ) + B

where:

h(t) represents the height of the tide (in meters) at time t (in hours)

A is the amplitude of the tide (in meters)

ω is the angular frequency of the tide (in radians per hour)

φ is the phase shift of the tide (in radians)

B is the mean sea level (in meters)

This function is a sinusoidal function, which is a common type of function used to model periodic phenomena. The sine function has a natural connection to circles and periodic motion, making it a good choice for modeling the regular rise and fall of ocean tides.

The amplitude A represents the maximum height of the tide above the mean sea level, while B represents the mean sea level. The angular frequency ω determines the rate at which the tide oscillates, with one full cycle (i.e., a high tide and a low tide) occurring every 12 hours. The phase shift φ determines the starting point of the tide cycle, with a value of zero indicating that the tide is at its highest point at time t=0.

To determine specific values for A, ω, φ, and B, we would need to gather data on the tide height at various times and locations. However, typical values for these parameters might be:

1. A = 2 meters (representing a relatively large tidal range)

2. ω = π/6 radians per hour (corresponding to a 12-hour period)

3. φ = 0 radians (assuming that high tide occurs at t=0)

4. B = 0 meters (assuming a mean sea level of zero)

Using these values, we can write the equation for the tide as:

h(t) = 2 sin(π/6 t)

We can evaluate this equation for various values of t to get the height of the tide at different times. For example, at t=0 (the start of the cycle), we have:

h(0) = 2 sin(0) = 0

indicating that the tide is at its lowest point. At t=6 (halfway through the cycle), we have:

h(6) = 2 sin(π/2) = 2

indicating that the tide is at its highest point. We can also graph the function to visualize the rise and fall of the tide over time:

Tide Graph

Overall, this function provides a simple and effective way to model the ocean tide using trigonometric functions.

(please mark my answer as brainliest)

Uri paid a landscaping company to mow his lawn. The company charged $74 for the service plus
5% tax. After tax, Uri also included a 10% tip with his payment. How much did he pay in all?

Answers

Uri paid a total of $85.47 for the landscaping service including tax and tip.

What is tax?

Taxes are compulsory payments made by a government organisation, whether local, regional, or federal, to people or businesses. Tax revenues are used to fund a variety of government initiatives, such as Social Security and Medicare as well as public infrastructure and services like roads and schools. Taxes are borne by whoever bears the cost of the tax in economics, whether this is the entity being taxed, such as a business, or the final users of the items produced by the firm. Taxes should be taken into consideration from an accounting standpoint, including payroll taxes, federal and state income taxes, and sales taxes.

Given that company charged $74 for the service plus 5% tax.

The tax is 5%, that is:

Tax = 5% of $74 = 0.05 x $74 = $3.70

Cost after tax = $74 + $3.70 = $77.70

Now, tip is 10%:

Tip = 10% of $77.70 = 0.10 x $77.70 = $7.77

Total cost = $77.70 + $7.77 = $85.47

Hence, Uri paid a total of $85.47 for the landscaping service including tax and tip.

Learn more about tax here:

https://brainly.com/question/16423331

#SPJ1

3. Each sample of water from a river has a 10% chance of contamination by a particular heavy metal. Find the probability that in 18 independent samples taken from the same river, only two samples were contaminated. [3 marks]​

Answers

The probability that, out of 18 independent samples received from one river, just two were contaminated is 0.8438.

Explain about the independent samples?Randomly chosen samples are known as independent samples since their results are independent of other observations' values. The premise that sampling are independent underlies many statistical analysis.When each trial possesses the same probability of achieving a given value, the number of trials or observations is represented using the binomial distribution.

In the following 18 samples to be evaluated,

Let X = the number of samples that now the pollutant is present in.

Thus, with p = 0.10 and n = 18, X is a binomial random variable.

Using the binomial theorem:

[tex](^{n} _{r} ) p^{x} q^{n-x}[/tex]

p = 0.10

q = 1 - 0.10 = 0.9

n = 18

The likelihood that only two samples out of 18 obtained in different ways from the same river were polluted

P(x = 2) = [tex](^{18} _{2} ) (0.1)^{2} (0.9)^{18-2}[/tex]

=  [tex](^{18} _{2} ) (0.1)^{2} (0.9)^{16}[/tex]

= 153 x 0.01 x 0.1853

= 0.8438

Thus, the probability that, out of 18 separate samples received from one river, just two were contaminated is 0.8438.

Know more about the independent samples

https://brainly.com/question/12184795

#SPJ1

I need your help to buy a door for my house. I have a scale drawing for the door I want but I am not sure of the true size. In the scale drawing the length is 4 in and the width as 7in. The scale for the door is 1 in = 1.5 ft. What are the actual measurements of the door?

Answers

Answer:

According to the scale, 1 inch on the drawing represents 1.5 feet in real life. So, to find the actual length of the door, we need to multiply the length on the drawing by the scale factor:

4 inches x 1.5 feet/inch = 6 feet

Similarly, to find the actual width of the door, we need to multiply the width on the drawing by the scale factor:

7 inches x 1.5 feet/inch = 10.5 feet

Therefore, the actual measurements of the door are 6 feet by 10.5 feet.

The dot plots below show the number of students in attendance each day in Mr. Wilson's class and Mr. Watson's class in April. What is the difference of the medians as a multiple of the interquartile range? A. B. C. D.

Answers

The difference of the medians as a multiple of the interquartile range is 0.5,So the correct answer is option (A) 0.5.

What is median?

The median is a measure of central tendency that represents the middle value in a data set when the values are arranged in numerical order.

For example, consider the data set {3, 5, 2, 6, 1, 4}. When the values are ordered from smallest to largest, we get {1, 2, 3, 4, 5, 6}. The median in this case is the middle value, which is 3.

We can first find the medians and interquartile ranges of the two dot plots.

For Mr. Wilson's class:

Median = 12

Q1 = 10

Q3 = 14

IQR = Q3 - Q1 = 14 - 10 = 4

For Mr. Watson's class:

Median = 10

Q1 = 8

Q3 = 12

IQR = Q3 - Q1 = 12 - 8 = 4

The difference of the medians is |12 - 10| = 2. Therefore, the difference of the medians as a multiple of the interquartile range is:

$$\frac{2}{4} = \boxed{0.5}$$

To know more about interquartile range visit:

https://brainly.com/question/29204101

#SPJ1

Construct triangle PQR in which angle Q = 30 deg , angle R=60^ and PQ + QR + RP = 10cm​

Answers

We can see here that in order to construct a triangle PQR in which angle Q = 30°, angle R=60° and PQ + QR + RP = 10cm​, here is a guide:

Draw a line segment AB = 10 cm.Construct angle 30° at point A and angle 60° at point B.Draw angle bisectors to angles A and B.Make sure these angle bisectors intersect at point P.Draw perpendicular bisector to line segment AP.Let this bisector meet AB at Q.Then draw perpendicular bisector to line segment BP.Let this bisector meet AB at R.Join PQ and PR.PQR is the required triangle.

What is a triangle?

A triangle is a geometric shape that is defined as a three-sided polygon, where each side is a line segment connecting two of the vertices, or corners, of the triangle. The interior angles of a triangle always add up to 180 degrees.

Triangles can be classified into different types based on their side lengths and angles, such as equilateral triangles with three equal sides and three equal angles, isosceles triangles with two equal sides and two equal angles, and scalene triangles with no equal sides or angles.

Triangles are used in many areas of mathematics and science, including geometry, trigonometry, and physics.

Learn more about triangle on https://brainly.com/question/28470545

#SPJ1

Use the shell method to set up and evaluate the integral that gives the volume of the solid generated by revolving the plane region about the y-axis.

Answers

Answer:

[tex]\dfrac{4096\pi}{5}\approx 2573.593\; \sf (3\;d.p.)[/tex]

Step-by-step explanation:

The shell method is a calculus technique used to find the volume of a solid revolution by decomposing the solid into cylindrical shells. The volume of each cylindrical shell is the product of the surface area of the cylinder and the thickness of the cylindrical wall. The total volume of the solid is found by integrating the volumes of all the shells over a certain interval.

The volume of the solid formed by revolving a region, R, around a vertical axis, bounded by x = a and x = b, is given by:

[tex]\displaystyle 2\pi \int^b_ar(x)h(x)\;\text{d}x[/tex]

where:

r(x) is the distance from the axis of rotation to x.h(x) is the height of the solid at x (the height of the shell).

[tex]\hrulefill[/tex]

We want to find the volume of the solid formed by rotating the region bounded by y = 0, y = √x, x = 0 and x = 16 about the y-axis.

As the axis of rotation is the y-axis, r(x) = x.

Therefore, in this case:

[tex]r(x)=x[/tex]

[tex]h(x)=\sqrt{x}[/tex]

[tex]a=0[/tex]

[tex]b=16[/tex]

Set up the integral:

[tex]\displaystyle 2\pi \int^{16}_0x\sqrt{x}\;\text{d}x[/tex]

Rewrite the square root of x as x to the power of 1/2:

[tex]\displaystyle 2\pi \int^{16}_0x \cdot x^{\frac{1}{2}}\;\text{d}x[/tex]

[tex]\textsf{Apply the exponent rule:} \quad a^b \cdot a^c=a^{b+c}[/tex]

[tex]\displaystyle 2\pi \int^{16}_0x^{\frac{3}{2}}\;\text{d}x[/tex]

Integrate using the power rule (increase the power by 1, then divide by the new power):

[tex]\begin{aligned}\displaystyle 2\pi \int^{16}_0x^{\frac{3}{2}}\;\text{d}x&=2\pi \left[\dfrac{2}{5}x^{\frac{5}{2}}\right]^{16}_0\\\\&=2\pi \left[\dfrac{2}{5}(16)^{\frac{5}{2}}-\dfrac{2}{5}(0)^{\frac{5}{2}}\right]\\\\&=2 \pi \cdot \dfrac{2}{5}(16)^{\frac{5}{2}}\\\\&=\dfrac{4\pi}{5}\cdot 1024\\\\&=\dfrac{4096\pi}{5}\\\\&\approx 2573.593\; \sf (3\;d.p.)\end{aligned}[/tex]

Therefore, the volume of the solid is exactly 4096π/5 or approximately 2573.593 (3 d.p.).

[tex]\hrulefill[/tex]

[tex]\boxed{\begin{minipage}{4 cm}\underline{Power Rule of Integration}\\\\$\displaystyle \int x^n\:\text{d}x=\dfrac{x^{n+1}}{n+1}(+\;\text{C})$\\\end{minipage}}[/tex]

(b) a dy integral that represents the surface area of the solid formed when c is rotated about the (x or y)-axis

Answers

The surface area of the surface generated by rotating the curve y = x² about the y-axis, and we found that the surface area is approximately 54.33 square units.

In this case, the curve we want to rotate is y = x², and we want to rotate it about the y-axis. To use the formula above, we need to express the equation of the curve in terms of x. Therefore, we need to rewrite y = x² as x = √y.

Next, we need to find the derivative of x = √y with respect to y, which is:

dx/dy = 1/2√y

Substituting this into the formula for the surface area, we get:

Surface Area = 2π ∫[0,4] √y √(1+(1/2√y)²) dy

Simplifying the expression inside the square root, we get:

Surface Area = 2π ∫[0,4] √(y+(1/4)) dy

We can evaluate this integral using the power rule of integration, which gives:

Surface Area = 2π [2/3(y+(1/4))^(3/2)]₀⁴

Simplifying further, we get:

Surface Area = 2π [2/3(17/4)^(3/2)]

Surface Area ≈ 54.33 square units

Therefore, the surface area of the surface generated by rotating the curve y = x² about the y-axis is approximately 54.33 square units.

To know more about surface area here

https://brainly.com/question/27784309

#SPJ4

Complete Question:

How do you find the area of the surface generated by rotating the curve about the y-axis y = x^2 , 0 ≤ x ≤ 2 ?

are the ratios 2:1 and 20:10 equivalent

Answers

Yes, there is an analogous ratio between 2:1 and 20:10.

What ratio is similar to 2 to 1?

We just cancel by a common factor. So 4:2=2:1 . The simplest representation of the ratio 4 to 2 is the ratio 2 to 1. Also, since each pair of numbers has the same relationship to one another, the ratios are equivalent.

By dividing the terms of each ratio by their greatest common factor, we may simplify both ratios to explain why.

As the greatest common factor for the ratio 2:1 is 1, additional simplification is not necessary.

The greatest common factor for the ratio 20:10 is 10. When we multiply both terms by 10, we get:

20 ÷ 10 : 10 ÷ 10

= 2 : 1

As a result, both ratios have the same reduced form, 2:1, making them equal.

To know more about ratio visit:-

https://brainly.com/question/13419413

#SPJ1

What was your recommended intake of carbohydrates (grams), and how far were you from it? Show the mathActual Intake Recommended Intake Percentage159.00 115-166 100%

Answers

The actual intake of carbohydrates is 138% as compare to recommended intake.

Recommended intake of carbohydrates or any other nutrient are,

Based on the information provided,

Consumed 159 grams of carbohydrates,

Recommended intake is between 115 and 166 grams.

Calculate the percentage of actual intake compared to the recommended intake, use the following formula,

Percentage = (Actual Intake / Recommended Intake) x 100%

Substituting the values in the formula we have,

⇒Percentage = (159 / 115) x 100%

⇒Percentage ≈ 138.3%

Therefore,  the actual intake of carbohydrates is about 138% of the recommended intake, indicating that consumption of more carbohydrates than recommended.

learn more about carbohydrates here

brainly.com/question/10052351

#SPJ4

Help i need this question solved

Answers

Answer: D. Square

Step-by-step explanation:

The shape created by the cross section of the cut through a square pyramid is a square.

To see why, imagine the pyramid sitting on a table with its square base flat against the surface. The cut goes through the vertex, which is the point at the top of the pyramid. Since the cut is perpendicular to the base, it divides the pyramid into two smaller pyramids with congruent, but not identical, bases. Each of these smaller pyramids has a triangular base that is an isosceles right triangle. The two triangles share a common hypotenuse, which is the line of the cut.

The cross section of the cut is the shape formed where the two triangles meet along the hypotenuse. Since both triangles are congruent and the hypotenuse is the same for both, the cross section is a square. The sides of the square are equal to the base of the original pyramid, which is one of the legs of the isosceles right triangles formed by the cut. Therefore, the answer is D, a square.

it’s D square !!!!!!

A line passes through points (5,3) and (-5,-2). Another line passes through points (-6,4) and (2,-4). Find the coordinates (ordered pairs) of the intersection of the two lines.

Step 1: Find the slope of each line
Step 2: Find the y-intercept of each line
Step 3: Write each line in slope-intercept form (y = mx + b)

Step 4: Solve for the system. Find the point of intersection for the system

Please help I will mark brainliest!!!

Answers

The point of intersection of the two lines is (-3.4, -1.2).

How to find the slope of each line?

Step 1: The slope of a line passing through two points (x1,y1) and (x2,y2) can be found using the formula:

m = (y2-y1)/(x2-x1)

Using this formula, we can find the slope of the first line:

m1 = (−2−3)/(-5 -5) = −5/(-10) = 1/2

And the slope of the second line:

m2 = (−4−4)/(2 -(-6)) = -8/4 = -2

Step 2: Find the y-intercept of each line

The y-intercept of a line in slope-intercept form (y = mx + b) is the value of y when x=0. We can use one of the two given points on each line to find the y-intercept:

For the first line passing through points (5,3) and (−5,−2):

y = mx + b

3 = (1/2)(5) + b

b = 3 - 5/2

b = 1/2

So the first line can be written as y = 1/2x + 1/2

For the second line passing through points (−6,4) and (2,−4):

y = mx + b

4 = (-2)(−6) + b

b = 4 - 12

b = -8

So the second line can be written as y = -2x - 8

Step 3: Each line in slope-intercept form (y = mx + b):

First line: y = 1/2x + 1/2

Second line: y = -2x - 8

Step 4: To find the point of intersection of the two lines, we need to solve the system of equations. We can solve for x by setting the two right-hand sides equal to each other:

1/2x + 1/2 = -2x - 8

(x + 1)/2 = -2x - 8

x + 1 = -4x - 16

5x = -16 - 1

5x = -17

x = -17/5

x = -3.4

Now that we know x, we can find y by substituting x=10 into one of the two equations:

y = -2x - 8

y = -2(-3.4) - 8

y = - 1.2

Thus, the point of intersection of the two lines is (-3.4, -1.2).

Learn more about equation of a line on:

https://brainly.com/question/18831322

#SPJ1

.2 In the diagram below, given that XY = 3cm, XZY = 30° and YZ = x, is it possible to solve for x using the theorem of Pythagoras? Motivate your answer. Show Calculations ​

Answers

Sin 30 =3/x

1/2=3/x

x=6

se spherical coordinates to evaluate the triple integral where is the region bounded by the spheres and .

Answers

The value of the triple integral[tex]\int \int\int _{E } \frac{e^{-(x^2+y^2+z^2)}}{\sqrt{(x^2+y^2+z^2}}\sqrt{dV}[/tex] by using spherical coordinates [tex]2\pi(e^{-1}-e^{-9})[/tex].

Given that the triple integral is-

[tex]\int \int\int _{E } \frac{e^{-(x^2+y^2+z^2)}}{\sqrt{(x^2+y^2+z^2}}\sqrt{dV}[/tex]

E is the region bounded by the spheres which are,

[tex]x^2+y^2+z^2=1\\\\x^2+y^2+z^2=9[/tex]

In spherical coordinates we have,

x = r cosθ sin ∅

y = r sinθ sin∅

z = r cos∅

dV = r²sin∅ dr dθ d∅

E contains two spheres of radius 1 and 3 () respectively, the bounds will be like this,

1 ≤ r ≤ 3

0 ≤ θ ≤ 2π

0 ≤ ∅ ≤ π

Then

[tex]\int \int\int _{E } \frac{e^{-(x^2+y^2+z^2)}}{\sqrt{(x^2+y^2+z^2}}\sqrt{dV}[/tex]

[tex]\int\int\int _{E} \frac{e^{-r^2}}{r}r^2Sin\phi drd\phi d\theta\\\\2\pi \int_{0}^{\pi} \int_1^3 re^{-r^2} dr d\phi\\\\2\pi \int_1^3 re^{-r^2} dr\\\\2\pi(e^{-1}-e^{-9})[/tex]

The complete question is-

Use spherical coordinates to evaluate the triple integral ∭ee−(x2 y2 z2)x2 y2 z2−−−−−−−−−−√dv, where e is the region bounded by the spheres x2 y2 z2=1 and x2 y2 z2=9.

learn more about triple integral,

https://brainly.com/question/30404807

#SPJ4

Other Questions
VIP, an abbreviation for "very important person," is synonymous with the word _____.A) terkB) shibbolethC) nabobD) jubilee PTC is a substance that has a strong bitter taste for some people and is tasteless for others. The ability to taste PTC is inherited and depends on a single gene that codes for a taste receptor on the tongue. Interestingly, although the PTC molecule is not found in nature, the ability to taste it correlates strongly with the ability to taste other naturally occurring bitter substances, many of which are toxins. About 75 % of Italians can taste PTC. You want to estimate the proportion of Americans with at least one Italian grandparent who can taste PTC. (a) Starting with the 75 % estimate for Italians, how large a sample must you collect in order to estimate the proportion of PTC tasters within 0.1 with 90 % confidence? (Enter your answer as a whole number.) n = (b) Estimate the sample size required if you made no assumptions about the value of the proportion who could taste PTC. (Enter your answer as a whole number.) n = Your friend Frans tells you that the system of linear equations you are solving cannot have a unique solution because the reduced matrix has a row of zeros. Comment on his claim. The claim is right. The claim is wrong. Need Help? Which of the compounds listed below, when added to water, is/are likely to increase the solubility of AgCl? A.Ammonia, B.NH3 Sodium cyanide, C.NaCN Potassium chloride,D.KCl What is the meaning of "an armed clash at the mouth of the Danube"? Let X and Y be independent random variables, uniformly distributed in the interval [0, 1 Find the CDF and the PDF of X-Y Assume that the full-empinyment level of GDP is $10,000. The current level of GDP is $8,000. Answer the following questions a. Does this economy have any cyclical unemployment? Explain. b. If the MPC is.8, what minimum decrease in taxes is needed to reach full employment? c. If the MPC is.8, what minimum increase in government spending is needed to reach full employment? d. Are your answers to questions b and c numerically identical? If not, explain why? e. Could an equal increase in government spending and in taxes be used to reach full employment GDP? If so, what amount? Shallow Drilling, Inc. has 76,650 shares of common stock outstanding with a beta of 1.47 and a market price of $50.00 per share. There are 14,250 shares of 6.40% preferred stock outstanding with a stated value of $100 per share and a market value of $80.00 per share. The company has 6,380 bonds outstanding that mature in 14 years. Each bond has a face value of $1,000, an 8.00% semiannual coupon rate, and is selling for 99.10% of par. The market risk premium is 9.79%, T-Bills are yielding 3.21%, and the tax rate is 26%. What discount rate should the firm apply to a new project's cash flows if the project has the same risk as the company's typical project?Group of answer choices Which phrase best describes the tone president reagan uses in this passage? serious and straightforward passionate and commanding funny and entertaining academic and instructional What is a structural observation you can make to explain why the rumen does not rip or burst? TADView InstructionsInterpreting a Dot PlotDAR3 4 51 2Number of pets at home6How many people have 2 pets at home?How many people have at least 3 pets at home?How many more people have 2 pets than 5 pets?How many people have less than 3 pets at home?1110 HELP MEEE Find a basis for the vector space of polynomialsp(t)of degree at most two which satisfy the constraintp(2)=0. How to enter your basis: if your basis is1+2t+3t2,4+5t+6t2then enter[[1,2,3],[4,5,6]] 1. Find the given derivative by finding the first few derivatives and observing the pattern that occurs. (d115/dx115(sin(x)). 2. For what values of x does the graph of f have a horizontal tangent? (Use n as your integer variable. Enter your answers as a comma- separated list.) f(x) = x + 2 sin(x). what are the potential drawbacks or issues with society that values sameness above all else in the giver chapter 1 you are the administrator for the westsim domain. organizational units (ous) have been created for each company department. user and computer accounts for each department have been moved into their respective department ous. please help 100 points help i will rate brainliest please help TRUE/FALSE. The str method is a good example of a polymorphic method that appears throughout Python's system of classes. Write the product in standard form.(x - 7) Mr. James is enlarging a logo for printingon the back of a T-shirt. He wants to enlarge a logo that is 3 inches by5 inches so that the dimensions are 3 times larger than the original. Howmany times as large as the original logo will the area of the printing be? psychologists question how individuals develop values that guide them in ethical decision making. which of the following reflects current thought on value development?