Answer: 2260 J/g is gained from the surrounding environment
When one gram of liquid water at its boiling point is changed into water vapor, 2260 J/g of energy is gained from the surrounding environment.
What is heat of vaporization?Heat of vaporization is the amount of heat that is required by any body during their transition process from liquid state to vapor state, at a particular temperature i.e. no change in temperature during whole process.
During the transition of one gram of liquid water into water vapor at its boiling point of 100°C, 2260 J/g energy is absorbed by the water for the formation of vapor.
Hence, option (3) is correct.
To know more about heat of vaporization, visit the below link:
https://brainly.com/question/26306578
You have three containers each of which is connected to a fourth empty container. Three of the containers contain pure gases. In the first container oxygen is at 2 atm, nitrogen at 4 atm is in the second container, and argon at 1 atm is in the third. When you open the valve and mix the gases in the forth container, what is the pressure, PT, in the forth container
Answer: The total pressure is 7 atm
Explanation:
According to Dalton's law, the total pressure is the sum of individual pressures.
[tex]p_{total}=p_A+p_B+p_C...[/tex]
Given : [tex]p_{total}[/tex] =total pressure of gases = ?
[tex]p_{O_2}[/tex] = partial pressure of oxygen = 2 atm
[tex]p_{N_2}[/tex] = partial pressure of nitrogen = 4 atm
[tex]p_{Ar}[/tex] = partial pressure of argon = 1 atm
putting in the values we get:
[tex]p_{total}=2atm+4atm+1atm[/tex]
[tex]p_{total}=7atm[/tex]
Thus the total pressure is 7 atm
Definition of Acid, base and
salt
Answer:
nenrhj4rhty4bdwkwwa
Explanation:
If energy cannot be created or destroyed, what happens to the kinetic and potential energy?
Answer:
According to the law of conservation of energy, energy cannot be created or destroyed, although it can be changed from one form to another. KE + PE = constant. ... As the car coasts down the hill, it moves faster and so it's kinetic energy increases and it's potential energy decreases. hope this helps
Explanation:
Answer:
They cannot be destroyed or created however,
Explanation:
it can only be transformed or transferred from one form to another.
A scientist places 10 ml of water in a test tube and heat it with flaming burner for 2 minutes. The liquid boils and escapes as a steam. This experiment is a good example of a
A chemical change
B physical change
C chemical property
D physical property
Solubility is the mass in a given volume of a substance.
True
False
Answer: True
Explanation:
HELP ASAP WHATS THE DEFINITION I NEED JT NKW
Answer:
1.Summer solstice 2.seasons 3. winter solstice 4. Equinox
Explanation:
I hope it helps!
Have a great day!
How many Calories are in 5,926 joules
What is thePercent composition of dichlorine heptoxide?
Answer:
The percent composition of dichlorine heptoxide is 38.76% CI and 61.24% O
Answer:
38.76%cl and 61.24%o
Explanation:
the percent composition of dichlorine heptoxide is 38.76%Cl and 61.24%O
During a dry compression test, the first puff of the test shows 50 PSI and the maximum reading after 4 strokes is 150 PSI. This indicates A. that the cylinders are good. B. weak piston rings. C. a bad spark plug. D. a hole in the piston.
One of the basic engine-diagnostic procedures that can be run is an engine compression test. All of the cylinders must have the same compression for the engine to run smoothly. There are just three possible ways for air to leak out of an engine and cause compression loss.
Exhaust or intake valve Engine rings (or piston, if there is a hole) An engine's head gasketThe procedures for conducting a compression testThe engine should be warmed to its typical operating temperature before testing in order to achieve the best results. The following procedures should be followed for an accurate compression test:
STEP 1: Dispose of each spark plug. As a result, the engine can be turned up to the same speed. Label all spark plug wires accurately.STEP 2 is to block the throttle open. This enables the engine to pull in the most air possible. Additionally, this step guarantees reliable compression test results.STEP 3 After inserting a compression gauge into a spark plug hole, start the engine. Four compression strokes of engine cranking should be performed in total. A puffing sound is produced after each compression stroke.EXAMPLE-If the ultimate, maximum value is 150 PSI, for instance, the reading following the first puff should be greater than 75 PSI. Low first-puff readings could be a sign of weak piston rings.STEP 4 Keep track of the highest readings, then compare the outcomes.Learn more about compression test here https://brainly.com/question/13274092
#SPJ2
Classify the following as either an element, compound, homogeneous mixture or
heterogeneous mixture:
sodium chloride
Sodium chloride is the chemical name for salt and is composed of sodium and chlorine, so it is a compound.
I need help fast pls someone
Answer:
I would say A. I'm no expert, but it can't be C obviously, and I think wind would hit all of it, wearing off the top as well like the great pyramids. B would be my next choice, but A i think would be best.
Predict the product of this reaction
Al(s) + N2(g)—->
can u identify a chemical equation for the saponification of olive oil as per your experiment?
I
is chemical energy stored in coal, gas, and oil?
Rank the following compounds in order of increasing solubility in water. Items (4 items) (Drag and drop into the appropriate area) No more items Items in order most soluble CaO BaO KCI KI
I have tried CaO> BaO > KCl > KI, this is incorrect.
Answer:
CaO < BaO < KCl <KI
Explanation:
Let us remember that the solubility of an ionic substance in water depends on the magnitude of the lattice energy and the hydration energy. If the hydration energy is equal to or is greater than the lattice energy, the substance dissolves in water.
However, the lattice energy depends on the size of the ions. The smaller the ions in the ionic compound, the higher the lattice energy and the lesser the solubility of the ionic compound.
KI has the least lattice energy and the highest solubility in water while CaO has the highest lattice energy and the least solubility in water.
What is the other product for this reaction ? H3PO4 + Ca(OH)2 —> H20 + _________
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: h3po4 + ca(oh)2 = h2o + ca3(po4)2
Explanation:
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
when are igneous rocks formed?
A. When layers of mud form inside Earth
B. When layers of mud are compressed
C. When melted rock solidifies
D. When solid rock melts
Answer:
C. When melted rock solidifies.
An FCC iron-carbon alloy initially containing 0.20 wt% C is carburized at an elevated temperature and in an atmosphere wherein the surface carbon concentration is maintained at 1.0 wt%. If after 51 h the concentration of carbon is 0.35 wt% at a position 3.9 mm below the surface, determine the temperature at which the treatment was carried out. You will need to use data in the two tables below to solve this problem.
Answer:
Explanation:
[tex]\text{From the information given:}[/tex]
[tex]C_o = 0.20 \ wt\% \\ \\ C_s = 1 \ wt\% \\ \\ t = 51 \ h \\ \\ x = 3.9 \ mm \\ \\ C_x = 0.35 \ wt\%[/tex]
[tex]\text{Using Fick's 2{nd} \ law \ of \ diffusion;} \\ \\ \dfrac{C_x- C_o}{C_s-C_o}= 1 - erf ( \dfrac{x}{2\sqrt{Dt}})[/tex]
[tex]\dfrac{0.35-0.20}{1-0.20}= 1 - erf ( \dfrac{x}{2\sqrt{Dt}})[/tex]
[tex]0.1875 = 1 - erf ( \dfrac{x}{2\sqrt{DT}}) \\ \\ erf ( \dfrac{x}{2\sqrt{DT}}) = 1 - 0.1875 \\ \\ erf ( \dfrac{x}{2\sqrt{DT}}) = 0.8125[/tex]
[tex]\text{To find the value of Z by Obtaining Data from Tabulation of Error Function}[/tex] [tex]\text{Table Values:}[/tex]
Z erf(z)
0.90 → 0.7970
0.95 → 0.8209
? → 0.8225
∴
[tex]\dfrac{z-0.90}{0.95-0.90}= \dfrac{0.8125-0.7970}{0.8209-0.7970}[/tex]
[tex]\dfrac{z-0.90}{0.05}= \dfrac{0.0155}{0.0239}[/tex]
[tex]z = 0.9324[/tex]
[tex]\text{To determine the diffusion coefficient;}[/tex]
[tex]erf (0.9324) = 0.8125 = erf (\dfrac{x}{2\sqrt{Dt}}) \\ \\[/tex]
[tex]\dfrac{x}{2 \sqrt{Dt}}= 0.9324 \\ \\ \dfrac{3.9 \times 10^{-3}}{2 \times \sqrt{D\times 51 \times 3600}} = 0.92324 \\ \\ \sqrt{D} = 4.88 \times 10^{-6} \\ \\ D = \sqrt{4.88 \times 10^{-6}} \\ \\ D = 2.38 \times 10^{-11} \ m^2 /s[/tex]
Exit ticket: Name the 2 factors that Terrestrial Biomes are separated by ___________ & ________
Answer:
temperature and rainfall
Explanation:
the ideal of stationary orbit was first given by?
Answer:
Neil Bohr
Explanation:
Thank me latur✊
Mg(s) + 2HCl (aq) -----> MgCl2 (aq) + H2
You have 6.00 g HCl and 4.8 g Mg.
What is the limiting reaction
Answer:
HCl is the limiting reactant
Explanation:
To find the limiting reactant of a reaction we must find the moles of each one as follows:
Moles Mg (Molar mass: 24.305g/mol)
4.8g Mg * (qmol / 24.305g) = 0.20 moles Mg
Moles HCl (Molar mass: 36.46g/mol)
6.00g HCl* (1mol / 36.46g) = 0.165 moles HCl
Based on the chemical reaction, for a complete reaction of 0.20 moles of Mg are necessaries:
0.20 moles Mg * (2mol HCl / 1mol Mg) = 0.40 moles HCl
As there are just 0.165 moles of HCl:
HCl is the limiting reactantA separatory funnel contains the two immiscible liquids water and toluene. Use the given densities to determine which layer is on top and which is on the bottom in the binary mixture.
Solvent Density (g/mL)
toluene 0.87
water 0.998
Drag and drop each label into the box to indicate the position of the liquid in the mixture.
Top layer
Bottom layer
Answer:
Top layer TolueneBottom layer WaterExplanation:
When two non-miscible liquids are put together, the one with the higher density will be on the bottom, while the one with the lower density will be on top.
Meaning that in this problem's case toluene would be on the top layer and water in the bottom layer.
Help this is for marks, who ever answers get brainliest
Answer:
Coal
Explanation:
thx for points :D
Answer:
Coal
Explanation:
your welcome<3
- Explain why the term greenhouse effect is used to describe the theory of global
warming.
Does the greenhouse effect affect life on Earth? If yes, explain how?
What are the possible effects of a buildup of greenhouse gases in our atmosphere?
Please help I have no idea where to start
Answer:
Download Ptable, it will show all of the elements, and you can click on them, and it will show all the information you need about them!
Explanation:
I hope this helps!!!!!
Identify the techniques used in the work-up and characterization of benzoic acid. The analytical method used to confirm the structure and functional groups of the product NMR spectroscopy The technique used to separate the pure product from any excess reagent, impurities, and byproducts Recrystallization The quick, numeric analysis used to characterize the product and assess the purity Melting point.
Answer:
Explanation:
[tex]\text{From the list of the options given; we are to identify the suitable techniques} \\ \\ \text{for the characterization of benzoic acid.}[/tex]
[tex]\text{The analytical method used to confirm the structure and functional groups}\\ \\ \text{present in the product is} \ \ \mathbf{IR \ spectroscopy.}[/tex]
[tex]\text{The technique used to separate pure products from any excess reagents,} \\ \\ \text{impurities, and byproducts is}\ \ \mathbf{Recrystallization.}[/tex]
[tex]\text{The quick, numeric analysis done to characterize the product and assess the purity is}[/tex][tex]\mathbf{melting \ point.}[/tex]
Consider the reactivity of phenol, bromobenzene, toluene, and nitrobenzene toward electrophilic aromatic substitution.
The most reactive compound is:_____
because the _______ character of the ______ increases the rate of the reaction.
The least reactive compound is ______
because the _______ character of the ________ decreases the rate of the reaction.
Answer:
The most reactive compound is: Phenol because the electron donating character of the alcohol group increases the rate of the reaction.
The least reactive compound is nitrobenzene
because the electron withdrawing character of the nitro group decreases the rate of the reaction.
Explanation:
PHENOL-: Any of a group of organic compounds with a hydroxyl (OH) group bound to a carbon atom in an aromatic ring is known as phenol. The word phenol is also the basic name for its simplest member, monohydroxybenzene (C6H5OH), also known as benzenol or carbolic acid, in addition to being the common name for the entire family.ELECTRON DONATING CHARACTER-: Via the carbon atom it is bound to, an electron donating group (EDG) has the net effect of increasing electron density in a molecule. EDGs alter a molecule's reactivity by increasing electron density on neighboring carbon atoms: EDGs make nucleophiles stronger.ALCOHOL GROUP-:Each of a class of organic compounds that have one or more hydroxyl (OH) groups bound to an alkyl group's carbon atom (hydrocarbon chain)is called Alcohol. Alcohols are organic compounds of water [tex](H_2O)[/tex] in which one of the hydrogen atoms has been substituted by an alkyl group, which in organic structures is usually expressed by R.NITROBENZENE-:The organic compound nitrobenzene has the chemical formula [tex](C_6H_5NO_2)[/tex]. It's a pale yellow oil that's insoluble in water and smells like almonds. Greenish-yellow crystals form when it freezes. It is made on a wide scale as a precursor to aniline from benzene. It is sometimes used as a solvent in the laboratory, especially for electrophilic reagents.ELECTRON WITHDRAWING GROUP-: An electron withdrawing group (EWG) is a type of group that reduces electron density in a molecule by bonding to a carbon atom. EWGs alter a molecule's reactivity by reducing electron density on neighboring carbon atoms.NITRO GROUP-: The nitro group is one of the most widely used explosophores (functional groups that combine to form a compound explosive). In addition, the nitro group is a heavy electron-withdrawing group. CH bonds alpha (adjacent) to the nitro group may be acidic due to this property.what does pen mean?.
Answer:
P = protons
E = electrons
N = neutrons
remember protons and neutrons (protons are positive and neutrons are neutral as you can already tell by their names) are found at the centre of the nucleus (positive mass). Whilst the electrons (negative) orbit around the shells
What is a hot spot? {Must be in your own words} Plz hurry
Answer:
Hot spot is like someone who has data or min on there phone turn on their phone wifi so you can use it pretty much
Answer:
a hot spot is a form of wifi that u can use anywhere at anytime. it connects to near satalites or wifi towers. it allows you to use devices r games without the need for wifi.
Explanation:
What is measured by the heat of reaction?
Answer:
The heat of reaction is basically the energy that is being released and or absorbed when chemicals are transformed in a type of chemical reaction. However, the heat of reaction or also called reaction enthalpy is mostly or typically expressed as a molar enthalpy in kJ/mol and or as just a specific enthalpy in kJ/kg or kJ/L.
