Answer:
bang on a drum
Explanation:
Answer:
Bang on drum
Explanation:
Its right.
How many moles of carbon atoms is 7.72 x 10 ^24 atoms of carbon? Round to 2 decimal places
Answer:
12.82 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{7.72 \times {10}^{24} }{6.02 \times {10}^{23} } \\ = 12.8 239[/tex]
We have the final answer as
12.82 molesHope this helps you
An eraser is an example of —
Group of answer choices
an insulator
a closed circuit
a conductor
an open circuit
Answer:
Insulator
Explanation:
An eraser can't conduct electricity, which makes it an insulator.
The specific heat of nickel is 0.445 J/g degree Celsius. How much heat is required to heat a 168 gram piece of nickel from 15.2 degrees Celsius to 43.6 degrees Celsius?
A covalent bond is formed when two atoms reach a stable state that balances:
MARK TWO RESPONSES
A
the repulsion between the nucleus protons of one atom to the electrons of the other atom
B
the attraction between the nucleus of one atom to the electrons of the other atom
C
the attraction between the two nuclei of the atoms, which both contain protons
D
the repulsion between the two nuclei of the atoms, which both contain protons
Answer:
B and I think A but you may want a secon opinion on that
Explanation:
I know that electrons are shared with covalent bonds so I assume the 2 answers are the ones with electrons it them
A student prepares four different aqueous NaCl solutions according to the table. Which solution will have the highest molarity?
Answer:
what did you end up guessing
Explanation:
A sample of a gas in a balloon has a volume of 4.20 L and temperature of 48.2 °C. Calculate the volume when
the temperature is lowered to 15.4°C at constant pressure.
a. 3.77
b. 4.20
c. 1.34
d. 13.15
e. 4.68
Answer:
V1/T1=V2/T2
4.20L/321.2K=x/288.4K
multiply both side by 288.4
1211.28/321.2=x
x=3.77L
Option 3 13.15 is the correct answer.
What is Charles law?Charles's law exists as an experimental gas law that explains how gases tend to expand when heated. A modern statement of Charles's law exists: When the pressure on a sample of a dry gas exists held constant, the Kelvin temperature and the volume will be in direct proportion.
According to Charles law
The volume occupied by a fixed amount of gas is directly proportional to its absolute temperature, if the pressure remains constant.
[tex]V1/T1=V2/T2[/tex]
Where,
[tex]V1[/tex]= first volume
[tex]V{2}[/tex] = second volume
[tex]T{1}[/tex] = first temperature
[tex]T{2}[/tex]= second temperature
Here, at constant pressure,
[tex]V1/T1=V2/T2[/tex]
[tex]V1[/tex]=4.20 L
[tex]V2[/tex]= x
[tex]T1[/tex]=321.2 K
[tex]T2[/tex]=288.4 K
Therefore, [tex]V1/T1=V2/T2[/tex]
4.20L/321.2K=x/288.4K
1211.28/321.2=x
x=3.77L
Thus option a is correct.
To learn more about Charles law refer to:
https://brainly.com/question/16927784
#SPJ2
What pressure is exerted by 1.11 mol of hydrogen gas in a 8.17 L container at 50◦C?
Answer in units of atm.
Answer:
20.0
Explanation:
Please help me out this is a test.
The imaje shows a plate baundary. Arrows have been added to indicate the movement if the plates.
Please help me find the answer , thank you.
Answer:
the answeer is definitely silicon.
I need help with science: Which picture best shows a loud, low-pitched sound?
Image A shows a loud and low-pitched sound.
What is the frequency?
The term frequency refers to the number of waves that pass a fixed point in unit time.
High pitched sound is of higher frequency because they make the air molecules vibrate much faster than low-pitched sound. Due to their high frequency, their wavelength is shorter (Remember wavelength and frequency are inversely proportional). Vice versa is true to the low-pitched sound. They vibrate air molecules slower than high-pitched sound. Their wavelength is longer and frequency smaller.
Hence, option A is the correct answer.
Learn more about frequency here:
https://brainly.com/question/3280221
#SPJ2
what are the factors that affect the rate of chemical reaction?
Answer:
surface area of a solid reactant.
concentration or pressure of a reactant.
temperature.
nature of the reactants.
presence/absence of a catalyst.
Identify the type of reaction occurring based on the description
below:
"Sodium hydroxide reacts with iron (III) chloride."
What type of reaction is this?
a Double displacement
b
Decomposition
C Synthesis
d Combustion Reaction
Answer:double displacement
Explanation:I just did it
Zr + O ⇒
B + O ⇒
Zn + C ⇒
Co + I ⇒
Mg + Br ⇒
WHAT- WHAT GRADE R YOU IN 0,0
pls show ur work will mark the brainliest
Answer:
M = 0.47
Explanation:
1 - Turn grams to moles using molar mass:
16g NaOH × 1 mol NaOH / 40g NaOH = 0.4 mol NaOH
2- Turn milliliters to liters:
855mL × 1 L / 1000mL = 0.86 L
3- Use formula which is M = moles of solute / liters of solvent:
M = 0.4 mol NaOH / 0.86 L = 0.47
PLZ HELP! QUESTION IS BELOW! :D
Answer:
Explanation:
When we say anything is a wave, what exactly do we mean? The most intuitive and straightforward wave to envision is a water wave. A motion, more specifically, is a disturbance that propagates or travels away from its source. Water waves are caused by a disruption in the water's surface, such as a rock tossed into a pond or a swimmer splashing the surface continuously. The noise for sound waves is a rise of air pressure, which may be caused by the oscillating cone within a speaker. There are many kinds of disturbances in earthquakes, including surface disturbances and pressure disturbances under the surface. Even radio signals are best deciphered by using a comparison of sea waves Water waves are helpful to visualize since they are more than just a mental picture. The amplitude, period, frequency, and energy of water waves are all the same as they are for all waves. A small set of underlying principles can be used to describe all wave characteristics.
(hope this helps can i plz have brainlist :D hehe)
A cough sytup contains 0.5M dextromethophan. How many moles of the cough supressant are in 21.3mL of the cough syrup?
Answer:
0.0107 mol
Explanation:
Multiply concentration by volume (in liters) to get moles.
0.5 M • 0.0213 L = 0.0107 mol
Construct an explanation for why the physical properties of the inner core, outer core, and lower mantle are essential for the development of Earth's magnetic field.
Answer:
The hot temperature of inner core and outer core is responsible for the production of magnetic field.
Explanation:
The physical properties of the inner core, outer core, and lower mantle are essential for the development of Earth's magnetic field because the very high temperature of inner core is responsible for the formation of magnetic field. If the inner core is not very hot so the magnetic field will not be generated and our earth's atmosphere will not be save from the solar wind. It can be blown away by the solar wind if this magnetic field is not present so we can conclude that the physical properties of inner core and outer core is important for the production of magnetic field.
What determines crystal size in minerals formed by lava or magma?
Answer:
When magma cools, crystals form because the solution is super-saturated with respect to some minerals. If the magma cools quickly, the crystals do not have much time to form, so they are very small. If the magma cools slowly, then the crystals have enough time to grow and become large.
Explanation:
When do recessive traits show in an offspring?
Answer:
Only individuals with an aa genotype will express a recessive trait; therefore, offspring must receive one recessive allele from each parent to exhibit a recessive trait. One example of a recessive inherited trait is a smooth chin, as opposed to a dominant cleft chin.
Explanation:
The weight of the elephant is 4500 kg, and the area of the sole of one of its legs is 1700 cm2. Calculate the pressure of the elephant on the ground.
Answer:
64852.94 N/m²
Explanation:
From the question,
P = F/A.................... Equation 1
Where P = Pressure of the Elephant on the ground, F = Weight of the Elephant, A = Area of the sole of the four legs.
But,
F = mg.............. Equation 2
Where m = mass of the elephant, g = acceleration due to gravity
Substitute equation 2 into equation 1
P = mg/A............ Equation 3
Given: m = 4500 kg, A = (1700×4) cm² ( The elephant has four legs) = 6800 cm² = 0.68 m²
Constant; g = 9.8 m/s²
Substitute these values into equation 3
P = (4500×9.8)/0.68
P = 64852.94 N/m²
What gas in the air is used by plants to make their own food? (2 points)
Nitrogen
Water vapor
Carbon dioxide
Oxygen
Answer:
Carbon Dioxide
Explanation:
Carbon dioxide gets turned into oxygen
PLZ HELP!
Where have you seen or known of examples of waves in YOUR LIFE? Based on science terms of a wave.
Answer:
QUESTION:
Where have you seen or known of examples of waves in YOUR LIFE? Based on science terms of a wave.
ANSWER:
I've seen the following in my life:
~ Lightwaves
~ Heatwaves
~ Electromagnetic waves
~ X-rays
~ Tsunami Waves
Explanation:
Hope that this helps you out! :)
If you have any questions please put them in the comment section below this answer.
Have a great rest of your day/night!
Please thank me on my profile if this answer has helped you.
If 34.2 g of NaOH are dissolved in water to make a 750 mL solution, what is the molarity of the solution?
Answer:
1.14 M
Explanation:
First divide the mass of NaOH by the molar mass of NaOH. Then divide by the volume to get molarity.
34.2 g / 39.997 g/mol = 0.855 mol NaOH
0.855 mol NaOH / 0.750 L = 1.14 M NaOH
Which statement best explains why ice cubes will melt in a glass of tea?
The tea becomes saturated.
The ice cubes gain energy.
The tea’s freezing point increases.
The ice cube’s melting point decreases.
Answer:
The ice cubes gain energy
Explanation:
The ice cubes are gaining energy from the water's carbon dioxide, or H2O. They then melt because they cannot hold that energy.
fill in the blank if its true or false
T=True
F=False
_________ 1. Stars do not change over their life cycles.
_________ 2. A protostar is the latest stage of a star’s life.
_________ 3. The larger the mass, the shorter the life cycle.
_________ 4. The hottest stars are blue and the coolest stars are red.
_________ 5. The white dwarf eventually runs out of fuel and dies as a red dwarf.
_________ 6. Our Sun is in the main sequence at the moment.
Answer: 1. F
2. F
3. T
4. F
5. T
6. T
Explanation:
I am not sure i'm sorry if it isn't right
3. Move the slider on the burette to the top to add about 25 mL of NaOH to the flask. What
happens, and what does this tell you about the pH of the flask?
Page Break
LED
Answer:
When you move the burette slider to the top of a flask and add about 25 mL of NaOH to the flask, you will cause a concentration of OH- molecules. This will make the solution become a basic solution and make the litmus paper blue.
Explanation:
After reading your question, we can see that you are carrying out a test to discover the nature of the pH of a solution. This type of test uses litmus paper, which is an indicator of the presence of acids and bases, being able to determine the pH of a solution. This paper is soaked in organic ink and when placed in an acidic solution, it is red in color. However, when placed in a basic solution it has a blue color.
An acidic solution is one that has a high concentration of H+ atoms and has the ability to donate electrons. The basic solution, on the other hand, has a high concentration of OH- and has the capacity to receive electrons.
When you move the burette slider to the top of a flask and add about 25 mL of NaOH to the flask, you will cause a concentration of OH- molecules. This will make the solution become a basic solution and make the litmus paper blue, that is, the solution has the basic pH.
Heeelllpp !!
What system is sealed and will not release any gases from a chemical reaction?
Answer: closed system
Explanation:
can i get a snap i could send a link to, to do a few chem 1 assignments i could award more points
Answer:The FitnessGram PACER Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The test is used to measure a student's aerobic capacity as part of the FitnessGram assessment. Students run back and forth as many times as they can, each lap signaled by a beep sound.
Explanation:
please help me :)
( check the photo! )
Answer:
plastic rays i think the matetial that can widely recycle
if an EXOTHERMIC reaction takes place in a container, the container will feel
a. hotter
b.colder
c. neither hotter nor colder
