The question is incomplete as it does not have the options which are:
deciduous forest
taiga (boreal forest)
temperate rainforest
tropical rainforest
Answer:
Taiga (boreal forest)
Explanation:
A Biome refers to the habitat which is occupied by flora and fauna living in similar conditions. These biomes are distinguished based on many features like precipitation, temperature and many other physical factors.
In the given question, the biome which receives an annual rainfall of 35 to 100 cm annually and is mostly covered by the coniferous trees is known as "Taiga biome" which is also known as Boreal forest.
The Taiga biome is one of the largest terrestrial biomes which is present in Eurasia and North America. The biome is characterised by the conifers trees and therefore is also known as the Coniferous trees.
Thus, Taiga (boreal forest) is the correct answer.
Answer: Taiga(boreal forest)
Explanation:
A paint brush is dropped from the top of a tall ladder and free falls to the ground. What changes, if any, would be observed of the velocity and the acceleration of the brush as it falls? Pick the two answers. The velocity increases. The velocity decreases. The velocity remains a constant value. The acceleration increases. The acceleration decreases. The acceleration remains a constant value.
Answer:
Explanation:
As the paint brush is dropped from the top of a tall ladder it started free falling
i.e. velocity of brush increases as it falls down due to the acceleration provided by gravity.
We know acceleration due to gravity is the attraction experienced by the object due to earth attraction
Value of acceleration due to gravity is constant i.e. [tex]9.8\ m/s^2[/tex]
Therefore the correct choice is
velocity is increasing and acceleration is constant
Gold, quartz, and talc are minerals. Copper and iron are types of ore. What is the difference between minerals and ores?
A mineral is a non-living, solid substance that can be extracted from the ground. Ore is a type of mineral made up of metals.
An ore is non-living and solid with little value unless it occurs in large amounts, in which case it is a mineral.
O A mineral is a valuable form of ore that can be extracted from the ground
O A mineral is a non-living, solid substance made of elements. Ore is a large deposit of one or more valuable minerals in the ground.
Answer:
A mineral is a valuable form of ore that can be extracted from the ground
Explanation:
Gold, quartz and talc are minerals because they are found in the earth in a valuable form of ore while ores are rocks that contain valuable concentrations of minerals.that can be mined.
An ORE in general term can be said to be a mineral deposit that contains enough Minerals that can be mined in commercial quantities while Minerals are valuable components of an Ore that can be mined ( naturally occurring ) in an ORE.
What energy transformations take place in Joule's system?
How does the current values in and out of the battery compare to the sum of currents going through the light bulbs?
Note: This is for Parallel circuits.
David delivers meals to elderly people once a week. He uses a cart to move the meals. The cart has four smooth wheels. Which type of friction acts between the cart wheels and the sidewalk?
A. sliding friction
B. rolling friction
C. fluid friction
D. static friction
Answer:Rolling
Explanation:
Since the wheels roll, the wheels do not rub against the sidewalk, So it cannot be sliding. The wheels are not a liquid, and there shouldnt be any static.
In an inelastic collision, which of the following statements is always true?
[A] Kinetic energy is conserved in the collision.
[B] Momentum is conserved in the collision.
[C] After the collision, the objects always merge into one.
[D] The collision takes more that 1 second to complete.
Answer: A
Explanation:
A
Are carbon compounds rigid and strong
El dibujo muestra donde se encuentra un caracol en distintos instantes de tiempo.?Podemos afirmar que se trata de un movimiento acelerado?Razona tu respuesta
Answer:
if the acceleration is zero the displacements are equal in the same time interval, so we would see the points equally spaced in the diagram
if the acceleration is different from zero in these cases the intervals are different in the same time intervals
Explanation:
In a drawing of displacement as a function of time, we can know if in motion it is steely or not, the relationship that describes the motion is
x = v₀ t + ½ a t²
we see that we have two cases:
* if the acceleration is zero the displacements are equal in the same time interval, so we would see the points equally spaced in the diagram
* if the acceleration is different from zero in these cases the intervals are different in the same time intervals. In the case of positive acceleration the points are spaced and in the chaos negative acceleration the points are getting closer to each other
a 25 ohm resistor in an electric circuit draws a current of 5 amperes a certain amount of charge through the resistor in 36 seconds calculate the voltage
Answer:
V= 125volts
Explanation:
R =25ohms
I = 5 amp
V = ?
t = 36seconds
V = IR
V = 5× 25
V= 125volts
Q = It
Q = 5×36
Q = 180 coulombs
Q is the amount of charge.
What is power?
A. a magnitude of a force needed to move an object
B. how much work can be done in a given time
C. the distance over time that an object moves
D, The energy needed to create work
Answer:
The answer is B.
Explanation:
The formula of power is :
[tex]power = \frac{work \: done}{time} [/tex]
* Work done can be "Energy"
. How does the intensity of sunlight received affect Earth’s temperatures?
explain how muscles and bones work together to help bend the arm.
Answer:
Bones make sure the arms structure is stable while the muscle is the one actively moving it and carrying out actions.
I’m a freshman, I got a 80% in the first quarter, 85% in the second and 70% in the third. I have a 46% in the fourth and 34 total absences in the class. If I fail, will I fail the class or the entire grade
Answer:
you will pass but if your grade become lower and u get more absences you will fail
How does the temperature of water affect the speed of the sound waves?
Answer:
Temperature is also a condition that affects the speed of sound. Heat, like sound, is a form of kinetic energy. Molecules at higher temperatures have more energy, thus they can vibrate faster. Since the molecules vibrate faster, sound waves can travel more quickly.
Jada’s family pulls into a gas station. Her mother fills up the car’s tank with fuel from a pump. Jada notices this symbol on the pump.
Image shows a pump at a gas station with a symbol of corn on it.
What do you think the symbol indicates?
A. This gasoline is to be used only in farm vehicles.
B. It is not safe to have gasoline around food products.
C. This gasoline can also be used as a fertilizer to help plants grow.
D. A biomass has been used as part of the fuel.
Answer:
D- a biomass has been used as a part of the fuel.
In which sound wave application are sound waves absorbed?
Answer: ultrasonic cleaners
Explanation:
To solve this we must be knowing each and every concept related to sound wave. Therefore, in ultrasonic cleaners, sound waves are absorbed.
What is sound wave?A sound is a type of energy or a vibration that moves through a material such as air or water. Sound may pass through such a gaseous medium as well. It is anything that is audible. The velocity of sound varies depending on the medium.
A wave is a medium that transmits energy from one location to another. Waves are classified into three types: transverse waves, longitudinal waves, or surface waves.
Transverse waves transport the material back and forth in a right angle towards the energy movement. Longitudinal waves transmit energy through compressing then expanding the medium, allowing the energy to travel ahead. In ultrasonic cleaners, sound waves are absorbed.
Therefore, in ultrasonic cleaners, sound waves are absorbed.
To know more about sound wave, here:
https://brainly.com/question/29767263
#SPJ2
A car is going 60.0 mi/h and has to stop in 6.0 seconds. What is the car’s acceleration?
Explanation:
Convert mi/h to ft/s.
60.0 mi/h × (5280 ft/mi) × (1 h / 3600 s) = 88.0 ft/s
Find the acceleration.
a = Δv / Δt
a = (0 ft/s − 88.0 ft/s) / 6.0 s
a = -14.7 ft/s²
The driver must accelerate the car at the average rate of
- 10 mile / hour-second
for 6 seconds .
The ____ is a line drawn at a right angle to a barrier. a. normal c. node b. ray d. wave front
Answer:
a. normal
Explanation:
In the field of physics the normal is a line drawn at a right angle to a barrier. In other words the normal line is the line that is drawn perpendicular (right angle, 90 degrees) to the reflective surface of a mirror, or the particular boundary in which refraction occurs at the point of incidence of a light ray. This can be seen in the picture attached below.
A boat at anchor is rocked by waves whose crests are 28 m apart and whose speed is 7 m/s. How often do these waves reach the boat? State your answer in terms of frequency (Hz) and period T (seconds).
Answer:
0.25 Hz
4 s
Explanation:
Speed = wavelength × frequency
7 m/s = 28 m × f
f = 0.25 Hz
Frequency = 1 / period
0.25 Hz = 1 / T
T = 4 s
why are the group 17 elements the most reactive of the nonmetal elements a)they are the biggest elements b)they have the fewest electrons c)they are located on the farthest right side of the periodic table d)they require only one electron to fill their outer energy level
Answer:
I think the answer is D-they require onky one electron to fill their outer energy level.
The baker needs 9 eggs, 6 cups of flour, 3 cups of sugar, and 3 sticks of butter to make a total of 3 cakes.. The baker only has 2 sticks of butter. That means the butter is the ___________ because the baker can only make 2 cakes!
Question 19 options:
Product
Reactant
Limiting reactant
Spontaneous reactant
Answer: Limiting reactant
Explanation:
The limiting reactant is a reactant will get completely consumed up in the reaction. This reactant being in low concentration will lead to the formation of limited amount of product.
In the given situation, since the butter cakes are required to be 3 sticks for making 3 cakes but only 2 cakes are available thus the butter stick is the limiting reactant.
WILL NAME BRAINLIEST!!!!!!
Match each word with its definition. Match the items in the left column to the items in the right column. 1. Nucleus of a helium atom 2. Electron ejected by a nucleus 3. Electromagnetic radiation from a nucleus 4. all emissions from a nucleus 5. Nuclear particle that has no charge 6. Nuclear particle that has a positive charge 7. One of several different nuclei of an element 8. Equivalent to the mass discrepancy in a nucleus 9. Measure of a radioactive materials lifetime 10. Unit of nuclear mass
amu
half-life
beta particle
binding energy
proton
radiation
isotope
neutron
gamma ray
alpha particle
Answer:
Please see the answers in the picture attached below.
Explanation:
Hope this answer can help you. Have a nice day!
What is the formula for velocity???
Explanation:
divide the distance by the time it takes to travel that same distance, then add your direction to it.
Or change in displacement divided by change in time.
Which of the following metric system units is used when measuring large quantities of water?
Gallons
Liters
mL
Cup
Answer:
I want to say Liters but not 100% sure
How is a problem and solution text
structure different from a cause and
effect text structure?
How do coal deposits found in the U.S. and Serbia help prove the theory of continental drift?
Answer:
Wegner's hypothesis met with wide skepticism, but found support and development in ... theory because Wegener could not satisfactorily explain how the continents moved.
Explanation:
Some of his theory was proven wrong, but he was still correct about his hypothesis. The fossils were part of proof for the theory because some of the fossils were found on shore line. And, some of those animals couldn't swim. So, this is proof that some animals lived on the land. And over time the land drifted apart.
Um joalheiro recebe uma encomenda onde ele deve fazer alguns anéis de prata. Ele dispõe de um pedaço de 100 g de prata mas precisa derrete-lo para colocar a prata em moldes específicos e construir esses anéis. O principal problema desse procedimento é que a temperatura de fusão da prata é muito alta e requer condições especiais. A prata possui temperatura de fusão de 961 ºC, calor latente de fusão de 21 cal/g e calor específico no estado sólido igual a 0,056 cal/gºC. Determine a quantidade de calor aproximada para fundir as 100 g de prata sabendo que sua temperatura inicial é de 20°C. A 2,1 kcal B 0,5 kcal C 7,4 kcal D 5,3 kcal E 6,3 kcal
Answer:
Correct option: C -> 7.4 kcal
Explanation:
First we need to find the energy necessary to heat the silver from 20°C to 961°. The change in temperature is 961 - 20 = 941, so the energy necessary is:
941 * 0.056 * 100 = 5269.6 cal
Then, for the melting process, we will need:
21 * 100 = 2100 cal
So the total energy needed is:
5269.6 + 2100 = 7369.6 cal = 7.4 kcal
Correct option: C
Each gas sample has the same temperature and pressure. which sample occupies the greatest volume? each gas sample has the same temperature and pressure. which sample occupies the greatest volume? 40.0 gar 20.0 gne 20.0 gh2 4.0 ghe
Answer:
20 gram of H as the greastest volume
Explanation:
Each gas sample has the same temperature and pressure. which sample occupies the greatest volume? each gas sample has the same temperature and pressure. which sample occupies the greatest volume? 40.0 gar 20.0 gne 20.0 gh2 4.0 ghe
Given that,
40.0 g of Ar
20.0 g of Ne
20.0 g of h
24.0 g of he
The ideal gas equation ; Pv = nRT
where P is the pressure, V is the volume, R is the gas constant, T is the temperature, n is the number of mole
which is equal to
n = m / M
where m is the given mass
M is the molar mass
The given gas sample are at the same temperature and pressure,
So, the temperature, pressure and gas constant are fixed.
Therefore the volume is proportional to the given mass and molar mass
V ∝ m/M
Substitute the given mass and molar mass of given masses for comparison
No of mole of Ar = mass / molar mass
= 40 / 40 = 1 mole
No of mole of Ne = mass / molar mass
= 20 / 20 = 1 mole
No of mole of h = mass / molar mass
= 20 / 1 = 20 mole
No of mole of he = mass / molar mass
= 24 / 4 = 6 mole
Hence, 20 gram of H as the greastest volume
How did Confucius believe that kings should behave? (Site 1) HURRY!!!!!
Answer:
Confucius believe that kings should behave RIGHTLY
Explanation:
CONFUCIUS believe that kings are supposed to behave rightly and rule justly ( according to the codes of ethics ) of the land and also live a right and just life.
Confucianism is an ancient philosophy established as far back as the fifth century by Confucius it's main aim was to guide the ancient and modern systems of government in the whole of Asia. it is called a religion by some while some call it a code of ethics and way of leadership
Answer:
CONFUCIUS believe that kings are supposed to behave rightly and rule justly ( according to the codes of ethics ) of the land and also live a right and just life.
Confucianism is an ancient philosophy established as far back as the fifth century by Confucius it's main aim was to guide the ancient and modern systems of government in the whole of Asia. it is called a religion by some while some call it a code of ethics and way of leadership
Explanation:
En la etiqueta de un bote de fabada de 350 g, leemos que su aporte energético es de 1630 kj por cada 100 g de producto a) La cantidad de fabada que tiene que comer un hombre si su necesidad energética diaria es 2500 kj para sobrevivir b) El aporte calórico del bote de fabada en calorías
Answer:
(a) 153.37 g
(b) 5705 kJ
Explanation:
(a) To find the amount of bean needed by a man you first calculate the equivalence in beans to 2500kJ
[tex]2500kJ*\frac{100g}{1630kJ}=153.37\ g[/tex]
Thus, 153.37 g has the energy needed by a man that needs 200kJ per day.
(b) The amount of energy per pot of bean is given by:
[tex]E=350g*\frac{1630kJ}{100g}\\\\E=5705\ kJ[/tex]
Thus, the energy is 5705kJ
