Which climate favors mechanical weathering?

Answer:

D

Explanation:

distance does not factor in when you are calculating the gravitational force of an object

The amplitude a of the motion is 0.498m.

energy-saving measures A fundamental law of physics and chemistry states that an isolated system's total energy remains constant despite internal changes. The first law of thermodynamics is based on this principle, which is most frequently stated as "energy cannot be created or destroyed."

Energy is neither created nor destroyed, according to the law of conservation of energy. For instance, when you roll a toy car down a ramp and it collides with a wall, kinetic energy is converted to potential energy.

Using conservation energy:

Loss in kinetic energy = gaining in spring

1/2mv² = 1/2kd²

mv² = kd²

d² = mv²/k

d² = 4.2×13.6/229

d² = 0.249

d = 0.498m.

To know more about conservation energy visit:

https://brainly.com/question/13949051

#SPJ4

Number of wavelengths are less than 1  which contained between me and the tuning fork which generated a frequency of 440Hz.

The tuning fork has a design that joins the closures of two sticks. While the tuning fork is vibrated, the tuning fork more than once approaches and afterward creates some distance from one another. The vibration component is straightforward, so it creates a sound with a solitary recurrence well. It has been utilized since old to make hints of explicit frequencies.

We know that wavelength is given by the formula=speed/frequency,or

λ=c/v

Now,we have frequency(v)=440Hz,also we know that speed of sound in air is 340m/sec

=>λ=340/440

=>λ=0.772m

Here, we can see that λ=0.772m  which shows that less than one wavelength are contained between me and fork.

Hence,count of wavelength is less than one.

To know more about tuning fork, visit here:

https://brainly.com/question/13032605

#SPJ4

The maximum height an object will reach if it is thrown vertically upwards at 24.0 m/s will be equal to 29.35 meters.

Kinetic energy is the term used in physics to describe the force that a moving item has.

It is described as the amount of effort necessary to accelerate anybody with a particular mass from rest to a given velocity. Except for variations in speed, the body retains the kinetic energy it gains during acceleration.

As per the given information in the question,

The formula of kinetic energy is,

K.E = 1/2 mv²   (i)

The formula of gravitational potential energy is,

u = mg     (ii)

Equate equations (i) and (ii)

1/2 mv² = mgh

h = 1/2 v²/g

h = 1/2 (24)²/9.81

= 576/19.62

h = 29.35 meters.

To know more about Kinetic energy:

https://brainly.com/question/26472013

#SPJ1

Procyon appears brighter in the sky.

An M1 red supergiant star is the type of star that Antares belongs to. Antares is substantially cooler and redder in color than most other stars, as indicated by its M1 designation. About 6,100 degrees Fahrenheit is the surface temperature (3,400 degrees C).

The brightest star in the constellation Scorpio, the scorpion, is Antares, which is frequently referred to as the scorpion's heart. The star is a red supergiant with a mass that is around 12 times that of the sun, a diameter that is 750 times that of the sun, and a luminosity that is more than 75,000 times greater.

TO know more about star antares you may visit:

https://brainly.com/question/14471998

#SPJ4

The heater needs to provide 540 W of power just to make up for the heat lost through this one wall.

Styrofoam is a trademarked brand of foam insulation and craft material manufactured by the Dow Chemical Company. It is made from expanded polystyrene (EPS) beads that are fused together with steam and pressure. EPS is a lightweight and rigid material that is used for insulation, packaging, and soundproofing. Its properties make it an ideal material for crafting, floristry, model building, and other art projects. Styrofoam is stable in most environments and is resistant to water, oil, and most chemicals. It can be cut, shaped, and painted easily and is an excellent thermal insulator. In addition, it is also non-toxic and non-carcinogenic, making it a safe and economical choice for many applications.

Assuming that the wall is a perfect insulator, the heater will have to provide enough power to make up for the heat lost due to conduction and convection. The rate of heat loss per unit area is given by:

Q = λ*A*(T2 - T1)/d
Where:
λ = thermal conductivity of styrofoam (see table above)
A = Area of wall (3*3) = 9 m2
T2 = Temperature inside the house (25C)
T1 = Temperature outside the house (0C)
d = thickness of styrofoam insulation (2.5 cm)

Plugging in the values we get:
Q = 0.045*9*(25-0)/0.025 = 540 W
Therefore, the heater needs to provide 540 W of power just to make up for the heat lost through this one wall.

To learn more about Styrofoam
https://brainly.com/question/29332536
#SPJ4

The weight of the bucket suspended by rope held in your hand is 20 N.

Newton's third law of motion states that for every action there is an equal and opposite reaction. That is the force applied or exerted on an object is equal to the reaction of the object.

Mathematically, the formula for the Newton's third law of motion is given as;

Fa = Fb

where;

The applied force and the reaction force are equal in magnitude but opposite in direction.

Thus, if the tension holding a bucket upward is 20 N, then there must be an equal and opposite force pushing the bucket downwards. The downward force of the bucket or the weight of the bucket must be equal to the tension holding the bucket upwards.

Learn more about weight here: https://brainly.com/question/2337612

#SPJ1

The kinetic energy is 939.87 J.

Kinetic energy is the power that an object has as a result of motion. If we want to accelerate an object, we have to exert force. Applying force requires effort on our part. The object will be moving at a new, constant speed once the work is done because energy has been transferred to it.

A particle, an object, or a collection of particles can move because of kinetic energy, which is the force that drives motion. Kinetic energy is used by objects in motion like a person walking, a baseball being thrown, food falling from a table, and charged particles in an electric field.

Kinetic energy = 1/2mv²

Kinetic energy =  1/2×0.06×177²

Kinetic energy = 939.87 J.

To know more about kinetic energy visit:

https://brainly.com/question/26472013

#SPJ4

Answer:

Explanation:

Fg = W = mg = (5.0 kg)(9.8 m/s²) = 49 N

Fnormal = W = 49 N

Ff = μFn = (0.10)(49 N) = 4.9 N

Fnet = 15 N - 4.9 N = 10.1 N

a = Fnet/m = (10.1N)/(5.0kg) = 2.02 m/s²

The rotational inertia of the wheel which has a radius of 0.34 m is 4.782 kgm²

The force applied tangentially to the wheel = 16.88 N

The radius of the wheel = 0.340 m

The angular acceleration of the well = 1.20 rad /s²

The rotational inertia can be found using the formula,

             I = F x r / α

where I is the rotational inertia

          F is the force applied

          r is the radius of the wheel

          α is the angular acceleration

Let us substitute the known values in the above equation, we get

              I = 16.88 x 0.34 / 1.20

                = 5.7392 / 1.20

                = 4.782 kgm²

Therefore, the rotational inertia is 4.782 kgm²

Learn more about the rotational inertia in

https://brainly.com/question/22513079

#SPJ4

The force with which the planet is attracted to the 10kg object is 4N.

Gravitational force is described as the most prevalent force in the universe, pulling together on any two objects with mass in the universe.

we have the following data:

Mass of object = 10 kg

Gravitational field strength = 4Nkg

To determine with what force the planet is attracted to the 10kg object:

Mathematically, the force with respect to the gravitational field strength is given by the formula:

Force = mass x gravitational field strength

Force = 10 x 4

force = 40 newton

We can conclude that the force with which the planet is attracted to the 10kg object is 4 Newton.

The gravitational field is the gravitational force exerted per unit mass on a small mass at a point in the field. The gravitational field strength at a point describes how strong or weak a gravitational field is at that point.

learn more about force at: https://brainly.com/question/12970081

#SPJ1

Answer: To calculate the height of the mountain, you can use the fact that atmospheric pressure decreases with increasing altitude. This relationship is described by the equation:

P = P0 * e^(-h/H)

where P is the atmospheric pressure at a given altitude, P0 is the atmospheric pressure at sea level, h is the altitude, and H is a constant known as the scale height.

Since the atmospheric pressure at the top of the mountain is known (760mmHg), and the atmospheric pressure at sea level is a standard value (approximately 101325 Pa), we can rearrange the above equation to solve for h:

h = -H * ln(P/P0)

Plugging in the known values, we have:

h = -H * ln(760mmHg / 101325 Pa)

= -H * ln(0.00750062)

The scale height of the atmosphere can be calculated using the ideal gas law:

H = RT / g

where R is the universal gas constant, T is the temperature of the air, and g is the acceleration due to gravity.

Plugging in the known values, we have:

H = (8.31 J/mol*K) * (288 K) / (9.81 m/s^2)

= 7478.9 m

Substituting this value back into the equation for h gives:

h = -7478.9 m * ln(0.00750062)

= -7478.9 m * (-3.876)

= 28934.7 m

Therefore, the height of the mountain is approximately 28,934 meters.

Three helium-4 nuclei (alpha particles) are turned into carbon by a series of nuclear fusion processes known as the triple-alpha process.

What results from the triple-alpha procedure as the finished product?

The triple-alpha process and the alpha process are two classes of nuclear fusion reactions that stars use to change helium into heavier elements. The alpha process is also referred to as the alpha ladder. [1] Only helium is used in the triple-alpha process, which also yields carbon.

Which statement concerning alpha particles in an atom is accurate?

Two protons and two neutrons make up alpha particles, which are identical to helium nuclei and have a positive charge.

Learn more about Alpha Particle

Visit:

https://brainly.com/question/17464734

#SPJ4

4.71 s long (in s) does it take a child on a swing to complete one swing if her center of gravity is 5.53 m below the pivot.

The average position of an object's weight is known as its center of gravity. Any object's travel through space may be entirely explained in terms of how its gravitational center moves from one location to another and, if it is free to spin, how it rotates around that center of gravity. Calculations combining gravitation and dynamics may be made much simpler by treating an object's mass as though it were concentrated at a single location.

T=2π√(l/g)

T=2π√(5.53/9.81)

T=4.71

T =4.71 s

To know more about center of gravity visit:

https://brainly.com/question/20662235

#SPJ4

Mass of the fertilizer bag is 165.82 kg

According to Newton's law,

F = m*a

So, m= F/a

m= 131/0.790

m= 165.82 kg

Mass is the measure of matter of a body.

Newton has stated three laws of motion. The first law states that every object will remain at rest or in uniform motion in a straight line unless an external force compels it to change its state of action .

The second law states that the acceleration of an object is dependent upon two variables - the net force acting upon the object and the mass of the object.

The third law states that every action has an equal and opposite reaction.

To know more such numericals, visit :

https://brainly.com/question/14633087

#SPJ4

The kind of spring should be held constant so as to improve the validity of the experiment.

Hooke's law states that the force that acts on a spring is directly proportional to the extension of the spring as long as the elastic limit is not exceeded.

As such, we can now understand that we can only be able to talk about the Hooke's law if there is no way in which the material has passed the elastic limit of the material. In this case, we are told that the students just embarked on a kind of experiment and they want to be able to verify the validity of the Hooke's law.

We saw that the masses that were hanged were increased but the springs were also changed. This would not allow us to determine the force constant and the Hooke's law accurately.

Learn more about Hooke's law:https://brainly.com/question/29126957

#SPJ1

The second weight of mass 96 g must be located at the 9 cm mark on the meter stick to keep it balanced.

To determine the location of the second weight that will keep the meter stick balanced, we need to consider the principles of equilibrium.

The weight of the meter stick can be calculated as follows:

Weight of meter stick = mass * acceleration due to gravity

= 24 g * 9.8 m/s^2

= 235.2 N

The total weight of the two hanging weights is 96 g + 96 g = 192 g = 1.92 N.

The sum of the forces acting on the meter stick is equal to zero when:

235.2 N + 1.92 N = 0

This equation tells us that the sum of the forces acting on the meter stick is equal to zero when the total weight of the two hanging weights is equal to the weight of the meter stick.

To determine the location of the second weight, we also need to consider the moments about the pivot point. The moment of a force is calculated as the product of the force and the distance from the pivot point. The moments about the pivot point are equal to zero when the sum of the moments of the forces on one side of the pivot point is equal to the sum of the moments of the forces on the other side of the pivot point.

The moment of the weight of the meter stick about the pivot point is calculated as follows:

Moment of the weight of meter stick = force * distance from pivot point

= 235.2 N * 0.4 m

= 94.08 N*m

The moment of the weight hanging from the 9 cm mark about the pivot point is calculated as follows:

Moment of weight hanging from 9 cm mark = force * distance from pivot point

= 1.92 N * 0.09 m

= 0.1728 N*m

To keep the meter stick balanced, the moment of the second weight must be equal in magnitude but opposite in direction to the moment of the weight hanging from the 9 cm mark. The moment of the second weight can be calculated as follows:

Moment of second weight = force * distance from pivot point

= 1.92 N * distance from pivot point

Substituting the value of the force and setting the moment equal to the negative of the moment of the weight hanging from the 9 cm mark, we get the following equation:

1.92 N * distance from pivot point = -0.1728 N*m

Solving for the distance from the pivot point, we find that the second weight must be located at a distance of 0.09 m from the pivot point, or 9 cm. This is the same distance from the pivot point as the weight hanging from the 9 cm mark.

Therefore, the second weight of mass 96 g must be located at the 9 cm mark on the meter stick to keep it balanced.

Learn more about Mass here:

https://brainly.com/question/19385703

#SPJ4

The centripetal force on the end of the wind turbine blade is equal to 3.8 kg x (0.42 rev/s)2 / 52.0 m = 0.227 N.

What is wind turbine blade?

A wind turbine blade is a type of aerodynamic blade typically found on wind turbines. The blades are designed to capture wind energy and convert it into mechanical power which is then used to drive a generator and produce electricity. The blades are typically made from a composite material such as fiberglass, carbon fiber, or aluminum and are designed to maximize efficiency while minimizing weight. The shape of the blades is carefully designed in order to capture the most wind energy possible, and the blades are often adjustable to allow the turbine to be optimized for different wind speeds. Wind turbine blades are an important part of wind energy technology and are critical to maximizing energy production.

Centripetal force is the force that acts on an object that is travelling in a circle at a constant speed. It is equal to the mass of the object multiplied by the square of its angular velocity, divided by the radius of the circle it is travelling in.

In this case, the centripetal force is equal to the mass of the wind turbine blade (3.8 kg) multiplied by the square of its angular velocity (0.42 rev/s), divided by the radius of the circle (52.0 m).

Therefore, the centripetal force on the end of the wind turbine blade is equal to 3.8 kg x (0.42 rev/s)2 / 52.0 m = 0.227 N.

To learn more about wind turbine blade
https://brainly.com/question/15321264
#SPJ4

Option (B)is correct

depends on the choice of axis of rotation

What does m in a moment of inertia mean?

Formula for Moment of Inertia

Moment of inertia is defined in general form as I = m r2,

where m is the sum of the product of the mass.

r is the separation from the rotational axis.

What elements affect inertia?

The position and orientation of the rotational axis affect a body's moment of inertia. It also depends on the body's size, shape, and how its mass is distributed around a particular axis. Q.

Learn more about Inertia

Visit

https://brainly.com/question/1358512

#SPJ4

Refer to the attached photos. I would appreciate a rate :)

Due to its larger diameter than the lgf, the mgf on an earth worm has a higher conduction velocity.

The class proposed that because the MGN has a bigger axon width, its conduction velocity will conduct an action potential more quickly than the LGN. Usually, an axon's myelin thickness increases together with its diameter.

The speed of action potential propagation along the axon increases with axon diameter. The sodium ions can migrate more quickly to produce the regeneration of the action potential in the following axon because a larger axon provides less resistance to the flow of ions.

Learn more about axon here:

https://brainly.com/question/21592989

#SPJ4

Answer:

Below

Explanation:

Normal force will be   mg cos 15° = 1.5*9.81 cos 15°   Newtons

Downplane force will be  mg sin 15° = 1.5 * 9.81  sin 15°    N

Acceleration

F = ma

F/m = a

1.5 ( 9.81) sin 15° / 1.5   m/s^2  = a

The kinetic energy of the object is 64 joule.

According to the definition of kinetic energy in physics, it is the amount of work that an item may accomplish while in motion.

As a scalar quantity, kinetic energy can only be fully defined by its magnitude.  SI unit of kinetic energy is Joule.

Given that: mass of the object: m = 2 kg.

Velocity of the object: v = 8 m/s.

Hence, kinetic energy of it   =1/2* mass* velocity^2

=  1/2*mv^2

= 1/2 × 2 × 8^2 joule

= 64 joule.

Hence the kinetic energy is 64 joule.

Learn more about kinetic energy here:

https://brainly.com/question/999862

#SPJ1

The new acceleration would be 24.0 m/s/s.

Acceleration is the rate of change of velocity of an object over time. It is a vector quantity, meaning that it has both magnitude and direction. Acceleration is the result of applying a force to an object, and can be described mathematically as the change in velocity (or speed) divided by the time it takes for the acceleration to occur. Acceleration can also be caused by a change in the direction of motion and is measured in meters per second squared (m/s2). It is an important concept in physics, and is used to describe motion in objects ranging from cars to planets.

The new acceleration would be 24.0 m/s/s. This is because the acceleration of an object is directly proportional to the force applied to it, and inversely proportional to its mass. Therefore, doubling the mass of the object would halve the acceleration, since the force applied to the object remains the same.

To learn more about acceleration
https://brainly.com/question/605631
#SPJ1

The essential prerequisite for destructive interference is a half-wavelength shift between the two waves.

Whenever two identical waves are superimposed in phase, constructive interference happens. When two identical waves are overlaid perfectly out of phase, destructive interference results.

Interference that is detrimental is what this is. The crest of one wave will exactly meet up with the trough of the second wave, and they will cancel each other out if the two waves (with the same amplitude) are moved by exactly half a wavelength when they combine.

Two waves must have the same amplitude traveling in opposing directions in order to interact destructively.

learn more about Interference refer

https://brainly.com/question/2166481

#SPJ4

The velocity of third mass of watermelon is 3.12m/sec if it explodes into three equal masses.

We know that we need to conserve the momentum of watermelon in a certain direction.Also,we know that initial momentum of watermelon is zero,it means that according to law of conservation of momentum final momentum should be zero.

Now,initial momentum of watermelon=0Kg-m/sec

Alos,we know that momentum =mass× velocity

Now,suppose watermelon has mass m.When it explodes into three equal parts,then the mass of each watermelon pieces is m/3

=>So,final momentum of piece moving to east=(m/3)×15

Similarly final momentum of second and third piece are

(m/3)×10×1/√2 and (m/3) × v × (1/√2)

So,conserving momentum,we get

=>0=(m/3) × 15 +((m/3)×10×1/√2 ) + (m/3)×10×1/√2 )×v

=> - (15 + 10/√2) = (10/√2)×v

=> - (15√2 + 10) = 10v

=>v = (15√2 + 10)/10

=>v= -(21.21+10)/10

=>v= -31.21/10

=>v= -3.12m/sec

Here negative sign shows that mass will move opposite direction to first piece.

Hence, required velocity is 3.12m/sec.

To know more about velocity, visit here:

https://brainly.com/question/18084516

#SPJ4

300 kelvin  temperature, in kelvins, will atoms of a monatomic gas have an average kinetic energy equal to this needed electrical potential energy.

Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is squeezed or extended, its potential energy increases. If a steel ball is lifted above the ground as opposed to falling to the ground, it has higher potential energy.

Our knowledge of the cosmos and how we fit into it depends on potential energy. In fact, potential energy and the labor necessary to move an item are determined by the position of the object in the universe. Everything we do has an impact on something's potential energy.

KE=3/2KT

=6.21*10(-21)

=3/2*1.30*10(-23)*T

T=300 kelvin

To know more about Potential energy visit:

https://brainly.com/question/24284560

#SPJ4

A statement which correctly describes how Rutherford thought of the atom based on evidence from his gold foil experiment include the following: A. Protons would be found in the nucleus, and electrons would be outside the nucleus.

Based on historical records and information, Ernest Rutherford performed a set of alpha-scattering experiments in 1910 which has helped several scientists and researchers to better understand the structure of atoms by using gold foil.

In his experiment on structure of atoms, Rutherford directed a beam of small, positively charged particles referred to as alpha particles (α) at a very thin sheet of gold foil.

Generally speaking, the differences which Ernest Rutherford may have observed if he had used an aluminum foil instead of a gold foil in his experiment include the following:

In conclusion, Ernest Rutherford discovered that an atom resembled a nucleus that is surrounded by electrons (outside the nucleus).

Read more on Rutherford' experiment here: brainly.com/question/1563766

#SPJ1

As we already know that intensity of light used is proportional to the no of electrons emitted per unit of time from the metal plate in the photoelectric effect and does not affect the energy of the emitted electrons and so the stopping potential of the photoelectric cell.

so, if we treat light as a packet of energy and follow quantum theory then it can only emit the electrons as energy is provided as a whole and there is no gap between the striking of photons and the emission of electrons from the metal plate but if we follow the classical theory of light being a wave than the intensity does not matter and no electron can be emitted as energy is provided in continuous form as energy can't be stored and used together.

know more about 'Photoelectric effect' here :

brainly.com/question/26465043