Answer: In an ionic bond, one atom donates an electron to another atom. This stabilizes both atoms. Because one atom essentially gains an electron and the other loses it, an ionic bond is polar. In other words, one atom in the bond has a positive charge, while the other has a negative charge. Often, these atoms dissociate into their ions in water. Atoms that participate in ionic bonding have different electronegativity values from each other. If you look at a table of electronegativity values, it is apparent ionic bonding occurs between metals and nonmetals. Examples of compounds with ionic bonds include salt, such as table salt (NaCl).
What is the molarity of a solution created by adding 0.75 moles of lithium fluoride to 65 L of solution?
Answer:
Molarity=Moles of solute/volume of solution in Litres
Simply imputing your values
you have
0.75/65
0.0115M.
if energy cannot be created then how did it exist in the first place???
Answer:
Different types of generators are used to create energy. Electrical energy is caused by moving electric charges called electrons. Electricity is a type of energy that comes from electrical energy. ... In power stations, turbines are turned using energy from sources such as heat, wind and moving water.
Explanation:
If a dog has a mass of 21.5 kg, what is its mass in the following units? Use scientific notation in all of your answers.
What is the dog’s mass in grams?
What is the dog’s mass in milligrams?
What is the dog’s mass in micrograms?
Explanation:
use the conversation in the image
Q1. Consider respiration, one of the most common chemical reactions on earth occur according
to the reaction:
C6H1206 +602 = 6CO2 + 6H2O + energy
What mass of CO2 forms in the reaction of 25g of glucose with 40g of oxygen?
Answer: First we need to know how many moles of each reactant there are.
C6H12O6 : 25g/180.06g/mol=0.1388mol
O2: 40g/32g/mol=1.25mol
The equation tells us we need 6 moles of O2 for every 1 mole of Glucose.
6 x 0.1388 = 0.8328
So, we have more O2 then needed – it is in excess.
Glucose is the limiting reagent – we use this for the calculation.
The equation tells us we make 6 moles of CO2 for every 1 mole of Glucose
So, we make 0,8328 moles of Carbon Dioxide
Explanation:
What is the atomic number of the atom
What is the balanced molecular equation and balanced chemical equation for NaSO4 and KNO3?
Answer:
=KSO4+Na2(NO3)2
Explanation:
the answer is true using this chemical equation balancer
Make a
prediction about how a lack
of resources in an ecosystem
might impact the levels of
organization.
Answer:
Limiting factors of an ecosystem include disease, severe climate and weather changes, predator-prey relationships, commercial development, environmental pollution and more. An excess or depletion of any one of these limiting factors can degrade and even destroy a habitat.
Explanation:
The limiting factor of an ecosystem involve disease, weather change, climate change, environment pollution and more. An excess or depletion of any of these factor can destroy over habitat.
What is Ecosystem?An ecosystem is define as a community or a group of living organisms that live together and are dependent on each other.
There are two main types of ecosystem.
Terrestrial ecosystem-Terrestrial ecosystem are land based ecosystem and interaction of biotic and abiotic component in the specific area.
Example- forest, grassland desert etc.
Aquatic ecosystem-Aquatic ecosystem are ecosystem formed by surrounding water bodies. They are dependent on each other and their environment .
Example- lake, pond, river etc.
Thus ecosystem and their limiting factor have great impact on the level of organization.
To learn more about ecosystem, refer to the link below:
https://brainly.com/question/13979184
#SPJ2
Which of the following is a job that bones do?
a.provide the body with shape and protection
b.store minerals
c.produce supply of daily blood cells
d.all of the above
Answer:
a.Provide the body which shape and protection.
Explanation:
Bones usually gives us shape as well as protects our innner organs.
so if it helps don't forget to like and Mark me
sketch the electrolytic cell for converting alumina to aluminum
How do humans influence genetic outcomes in artificial selection and what impacts does this have on society?
Answer:
In artificial selection, humans have the capacity to influence certain characteristics of organisms by selective breeding. One can choose desired parental traits determined by genes, which are then passed on to offspring.
Help asap pls! Circulating air caused when warm air rises and cool air sinks. Convection currents occur throughout the world.
1.barrage 2.collection area 3.convection current
3. Convection Current
But just a tip Next time try to emphasize the question a little more ! Hope this helps :)
45. What is the H ion concentration of an aqueous solution
in which the OH-ion concentration is 1 x 10-2 mole
per liter?
A) 1 X 10-14 M
C) 1 x 10-9M
B) 1 x 10-12 M
D) | 10-2M
Answer:
= 1 X 10⁻⁻¹²M
Explanation:
At 25°C & 1atm [H⁺][OH⁻] = 1 x 10⁻¹⁴ => [H⁺] = 1 X 10⁻¹⁴/[OH⁻] = 1 X 10⁻¹⁴/1 X 10⁻²
= 1 X 10⁻⁻¹²M
What is the maximum number of electrons that can be identified with each of following sets of quantum numbers? If there are none, enter 0.
Answer:
So, only one electron is there with n = 0, l = 0 and its quantum set is n = 0, l = 0, ml = 0, ms = -1/2. Hope, this is helping. The maximum number of electrons that can fit inside a 'n' shell is 2n^2. So it would be 1.
Explanation:
Quantum numbers are defined as the set of four numbers with the help of which we can get complete information about the electrons in an atom. Here the term 'n' represents the principal quantum number.
What is principal quantum number?The quantum number which represents the main energy level or shell in which electrons are present. It also determines the average distance of orbital or electron from the nucleus. It can have the whole number values like 1,2,3,4, ....
1. When n = 2, the maximum number of electrons present is 8. That is one 's' sub level and three 'p' sub levels. The spin of four electrons will be +1/2 and other four will be -1/2.
2. When l = 3, the possible orientations = 2l + 1 = 2(3) + 1 = 7. So the maximum number of electrons is 14.
3. The value of ml = -1 indicates only one orbital. So the maximum electrons is 2.
4. Here ml = -1, 0, 1 which shows three orbitals. So in ml = -1, there are only two electrons.
To know more about quantum number, visit;
https://brainly.com/question/2193783
#SPJ2
Which do you use to qualify matter?
A. Thermometer
B. Five senses
C. Balance
D. Tape measure
Answer:
c balance
Explanation:
if you weigh something, you prove it's there.
Draw the major organic product formed in the reaction. (The reaction stoichiometry is 1 mol reactant: 1 mol Br2 .)
Answer:
Explanation:
The treatment of aldehyde or ketone in the presence of acetic acid with one mole of bromine results in ∝-halo aldehyde or ketone. However, the bromination of ketone undergoes acidic conditions. Hence, the reaction of the ketone with Bromine resulting in the Major Product is shown in the image attached below.
How many moles of water are produced from the reaction of 0.224 mol oxygen according to this equation? 2H2 + O2 -> 2H2O
Answer:
0.448 mols
Explanation:
Use balanced equation:
2H2 + O2 -> 2H2O
For every one mole of oxygen, there are two moles of water
hence the molar ratio 1:2
So if there are 0.224 mols of oxygen
Water = 0.224×2
Which is 0.448 mols of H20
a shape with five sides is called a?
Answer:
A five-sided shape is called a pentagon.
Explanation:
Answered by NONE other than the ONE & ONLY #QUEEN herself aka #DRIPPQUEENMO!!!
Hope this helped!!!
Answer:
a pentagon
Explanation:
I remember that a pentagon has 5 sides
what is a chemical bond?
how ate chemical bond different from each other?.
What is the molarity (molar concentration, unit = M) of K+ found in 200 mL 0.2 M K2HPO4 solution?
Answer:
0.4 M
Explanation:
The process that takes place in an aqueous K₂HPO₄ solution is:
K₂HPO₄ → 2K⁺ + HPO₄⁻²First we calculate how many K₂HPO₄ moles are there in 200 mL of a 0.2 M solution:
200 mL * 0.2 M = 40 mmol K₂HPO₄Then we convert K₂HPO₄ moles into K⁺ moles, using the stoichiometric coefficients of the reaction above:
40 mmol K₂HPO₄ * [tex]\frac{2mmolK^+}{1mmolK_2HPO_4}[/tex] = 80 mmol K⁺Finally we divide the number of K⁺ moles by the volume, to calculate the molarity:
80 mmol K⁺ / 200 mL = 0.4 MFires are classified into various classes and as such different types of portable fire extinguishers must be used. The theory behind portable fire extinguishers is that the fire can be extinguished by removing any or more of the following four elements:
Fuel, Heat, Oxygen, Chain Reaction.
Identify the extinguishing mechanism and the classe(s) of fires they are used to extinguish for the following types of fire extinguishers:
ABC Powder, Carbon dioxide, Foam, Water.
Answer:
Explanation:
ABC Powder: sprays a very fine chemical powder. This acts to blanket the fire and suffocate it. Class A, B, C fires
Carbon dioxide: extinguishes CO2. By doing so, it removes oxygen from the fire, effectively suffocating it of oxygen. Class B fires
Foam: spray a type of foam that expands when it hits the air and blankets the fire. This prevents the vapors from rising off the liquid to feed the fire, thus starving it of fuel. Class A and B
Water: releases microscopic water molecules that fight the fire on a variety of levels. the level of oxygen in the air is decreased, which helps to suffocate the fire. Class: most all
also, your fire classes:
Class A: freely burning, combustible solid materials such as wood or paper
Class B: flammable liquid or gas
Class C: energized electrical fire (energized electrical source serves as the ignitor of a class A or B fire – if electrical source is removed, it is no longer a class C fire)
Class D: metallic fire (titanium, zirconium, magnesium, sodium)
Class K: cooking fires – animal or vegetable oils or fats
Name 3 ways you can keep our community healthy?
Answer:
1. Practice healthy habits with kids in your life. ...
2. Engage in your school's efforts to encourage healthy practices. ...
3. Learn more about the decisions local officials are making that impact your environment. ...
4. Give back healthy options to your community.
Explanation:
Be sure to answer all parts.
Find the pH during the titration of 20.00 mL of 0.1000 M triethylamine, (CH3CH2)3N (Kb = 5.2 × 10−4), with 0.1000 M HCl solution after the following additions of titrant.
20.20 mL:
pH =
a.
Initial moles of (CH₃CH₂)₃N = (0.1000 mol/L) × (20.00/1000 L) = 0.002 mol
Moles of HCl added = (0.1000 mol/L) × (13.00/1000 L) = 0.0013 mol
Addition of 1 mole of HCl reacts with 1 mole of (CH₃CH₂)₃N to 1 mole of (CH₃CH₂)₃NH⁺.
After addition of 13.00 mL of HCl:
Moles of (CH₃CH₂)₃N left unreacted = (0.002 - 0.0013) mol = 0.0007 mol
Moles of (CH₃CH₂)₃NH⁺ produced = 0.0013 mol
Hence, [(CH₃CH₂)₃NH⁺]/[(CH₃CH₂)₃N] = 0.0013/0.0007 = 13/7
Consider the dissociation of (CH₃CH₂)₃N:
(CH₃CH₂)₃N(aq) + H₂O(l) ⇌ (CH₃CH₂)₃NH⁺(aq) + OH⁻(aq) …… Kb = 5.2 × 10⁻⁴
Henderson-Hasselbalch equation:
pOH = pKb + log([(CH₃CH₂)₃NH⁺]/[(CH₃CH₂)₃N])
pOH = -log(5.2 × 10⁻⁴) + log(13/7) = 3.55
pH = pKw - pOH = 14.00 - 3.55 = 10.45
====
b.
Initial moles of (CH₃CH₂)₃N = 0.002 mol
Moles of HCl added = (0.1000 mol/L) × (20.80/1000 L) = 0.00208 mol
HCl is in excess.
Moles of HCl left unreacted = (0.00208 - 0.002) mol = 0.00008 mol
Volume of the final solution = (20.00 + 20.80) mL = 40.8 mL = 0.0408 L
In the final solution:
[H₃O⁺] = [HCl] = (0.00008 mol) / (0.0408 L) = 0.00196
pH = -log[H₃O⁺] = -log(0.00196) = 2.71
====
c.
Initial moles of (CH₃CH₂)₃N = 0.002 mol
Moles of HCl added = (0.1000 mol/L) × (29.00/1000 L) = 0.0029 mol
HCl is in excess.
Moles of HCl left unreacted = (0.0029 - 0.002) mol = 0.0009 mol
Volume of the final solution = (20.00 + 29.00) mL = 49 mL = 0.049 L
In the final solution:
[H₃O⁺] = [HCl] = (0.0009 mol) / (0.049 L) = 0.0184
pH = -log[H₃O⁺] = -log(0.0184) = 1.74
What is the name of the structure formed when fertilization occurs?
Answer:
zygote
Explanation:
I got this online
Answer:
ᘔYᘜOTᗴ:=> In human fertilization, a released ovum (a haploid secondary oocyte with replicate chromosome copies) and a haploid sperm cell (male gamete)—combine to form a single 2n diploid cell called the zygote.
ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ
[tex] \infty \infty [/tex]
1. When there is light, photosynthesis can
A. occur, in the chloroplast.
B. not occur, and the stomata will not be open.
C. not occur, and the stomata will be open.
D. occur, in the
mitochondria.
Answer:
A
Explanation:
Answer:
A. occur, in the chloroplast.
Explanation:
Photosynthesis occur in chloroplasts, with the help of sunlight. Where mitochondria help in respiration
Please could you help me with this question
(No links or spam)
Will give brainliest if correct
Answer:
first one pure
second one mixture..
Which overall chemical equation is obtained by combining these intermediate equations?
Which measurement occurs last when collecting data to determine the
percentage by mass of a solution?
mass percent = (mass of element in 1 mole of compound / mass of 1 mole of compound) x 100. The formula for a solution is:
mass percent = (grams of solute / grams of solute plus solvent) x 100. or.
mass percent = (grams of solute / grams of solution) x 100. The final answer is given as %.
Hope this helps!!
A solution of HCl is made by dissolving .005 moles of HCl in 50 L of water. What is the pH of the solution? What is the pOH?
PH?
0.0001
4.00
11.00
2.3p
pOH?
2.00
4.00
10.00
12.00
Answer:
pH= 4; pOH= 10
Explanation:
HCl is a strong acid and therefore dissociates completely in a solution of water via HCl + H2O --> Cl- + H3O+.
Because it is a strong acid, [HCl] = [H3O+].
[HCl]= [H3O+]= (0.005 mol)/(50L)= 1.0 x 10^-4
pH= -log[H3O+]
pH= -log(1.0 x 10^-4)= 4
pH + pOH = 14
4 + pOH = 14
pOH= 10
Why is the method of using a density bottle more accurate than the measuring cylinder
Answer:
While measuring relative density of liquids, two common method of measuring the volume are a measuring cylinder and a density bottle. Among these two method the density bottle gives more accurate measurement of the volume, resulting in more accurate determination of density or relative density
Answer:
While measuring relative density of liquids, two common method of measuring the volume are a measuring cylinder and a density bottle. Among these two method the density bottle gives more accurate measurement of the volume, resulting in more accurate determination of density or relative density.
Explanation:
Franklin was performing an experiment by combining hydrochloric acid and sodium hydroxide. He measured the mass of his reactant materials to be 35g. The reaction resulted in the production of salt and water. He reported that his products weighed 32g. Which best describes the results of Franklin’s experiment? No error occurred, some of the products are always lost as heat. An error occurred, the mass of the reactants should equal the mass of the products. An error occurred, the products should weigh more than the reactants. No error occurred, water is not weighed when determining the weight of the products.
Answer:
B) an error occurred, the mass of the reactants should equal the mass of the products.
Explanation:
The answer choices are:
A) no error occurred, some of the products are always lost as heat.
B) an error occurred, the mass of the reactants should equal the mass of the products.
C) an error occurred, the products should weigh more than the reactants.
D) no error occurred, water is not weighed when determining the weight of the products.
SolutionThe basis to answer this question is the law of conservation of mass.
Any chemical reaction satisfies the law of conservation of mass: mass cannot be either created nor destroyed, so, always, the mass of the reactants equal the mass of the products.
Thus, since he measured the mass of his reactant materials to be 35g and he reported that his products weighed 32g, his data are in clear contradiction of the law of conservation of mass. So, there is an error in his results: the mass of the reactants should equal the mass of the products.
An error occurred, the mass of the reactants should equal the mass of the products according to law of conservation of mass for the given experiment. Therefore, the correct option is option B.
The mass of the reactants and products in a chemical reaction should be equal, in accordance with the law of conservation of mass. This implies that there is no net change in mass during the chemical process. The mass of the reactants and products in a chemical reaction should be equal, in accordance with the law of conservation of mass. This implies that there is no net change in mass during the chemical process.
Franklin determined the mass of the reactant components in this instance to be 35g, and the products of the reaction weighed 32g. An error occurred because the mass of the reactants should equal the mass of the products, but the mass of the products is less than the mass of the reactants.
Therefore, the correct option is option B.
To know more about law of conservation of mass, here:
https://brainly.com/question/28711001
#SPJ7
