which compound has molecules​

Answer:

All objects on Earth, regardless of their mass, accelerate due to gravity at the same rate - that is, 9.8 m/sec2. The weight of an object can be calculated using the formula for force - F = m * a - where F equals the weight of the object and now the acceleration (a) is the acceleration of gravity (g).

Answer:

i think torque is the answer not confirmed

Answer:

0.1 km/min

Explanation:

7 / 70 = 0.1km/min

Answer:

......... ........ ... .... .... . .. .......

.....

Explanation:

........mmmmmmmmmmm

Answer:

Uniform motion is a type of motion that is characterized as the motion of an object wherein the object moves in a straight line and its velocity remains unchanged along that line, regardless of the duration of time, as it occupies equal distances at equal time interval and Non-uniform motion is described as the motion of an object wherein the object moves at different speeds and does not cover the same distance at equal time intervals, regardless of the duration of the time interval.

Answer:

hope it's help you

Explanation:

In Uniform motion, the movement of a body is along the straight line with constant speed. In non uniform motion, the movement of a body is along the straight line with variable speed. In uniform motion, the body covers equal distance in an equal interval of time.

The average acceleration of the bike is 2.2 m/s²

Acceleration, rate at which velocity changes with time, in terms of both speed and direction.

A point or an object moving in a straight line is accelerated if it speeds up or slows down.

According to the question,

Given, initial velocity, u=3.0m/s and final velocity v=8.5 m/s

Time = 2.5 seconds

If a be the acceleration.

a = [tex]\frac{v-u}{t}[/tex]

a = [tex]\frac{8.5 - 3.0}{2.5s}[/tex]

⟹ a=2.2 m/s²

So, The average acceleration of the bike is 2.2 m/s²

Learn more about average acceleration here:

https://brainly.com/question/2303856

#SPJ2

Answer:

A

The upthrust on a floating body is in upwards direction and is equal to the weight of the liquid displaced

B

The upthrust is directly proportional to the density of the liquid in which the solid is immersed

C

The upthrust is directly proportional to the volume of the fluid displaced by a solid

The upthrust acts on the body in upward direction at the center of buoyancy.

Upthrust is equal to the weight of liquid displaced by object and weight of liquid will depend on its density.

Upthrust is F=Vρg ,where V is the volume of liquid displaced and ρ is the density of fluid.

The total lateral pressure acting on an immersed object on one side is equal and in opposite direction to the total lateral pressure acting on the other side.

The frequency of the wave for the stone thrown in the pond is 0.5Hertz.

The question does not specify what to calculate but we can look for the frequency of the wave.

Frequency is the number of oscillations completed in one second. This is interpreted as:

x oscillations = 1second

If Five waves were made from the same source in 10 seconds for a stone that is thrown inside the pond, then:

5 oscillations = 10seconds

Divide both expressions to get x (the required frequency)

x/5 =1/10

Cross multiply

10x = 5

Divide both sides by 10

10x/10 = 5/10

x = 1/2

x = 0.5Hertz

Hence the frequency of the wave is 0.5Hertz.

NB: The period of the wave is simply the reciprocal of the frequency.

Learn more here: https://brainly.com/question/13728731

Answer:

The mechanical energy of the cardboard box, M.E. = K.E. + P.E.

Where;

P.E. = The potential energy of the cardboard box = m·g·h

K.E. = The kinetic energy of the cardboard box = (1/2)·m·v²

Where;

m = Mass of the cardboard box

g = The (constant) acceleration due to gravity ≈ 9.81 m/s²

h = The height of the cardboard box

v = The velocity of the cardboard box

At the top of the fall, where h = The height of the platform = [tex]h_{platform}[/tex], and v = 0 (the box is initially at rest at the top), the M.E. is given as follows;

[tex]M.E._{top}[/tex] = P.E. + K.E. = m·g·[tex]h_{platform}[/tex] + (1/2) × m × 0² = m·g·[tex]h_{platform}[/tex]

However, at the bottom of the fall, the height of the box, h = 0, the velocity of the box, v = 0, therefore, the total energy at the bottom, after the box comes to rest, [tex]M.E._{bottom}[/tex] = 0

Therefore;

The total energy of the box at the top of the fall, .[tex]M.E._{top}[/tex] = m·g·[tex]h_{platform}[/tex] was more than the total energy of the box at the bottom of the fall,

[tex]M.E._{bottom}[/tex] = 0

Explanation:

Answer:

3012.012m

Explanation:

s=it +1/2(10.8)(16.7)^2

Answer:

The final translational seed at the bottom of the ramp is approximately 4.84 m/s

Explanation:

The given parameters are;

The radius of the sphere, R = 2.50 cm

The mass of the sphere, m = 4.75 kg

The translational speed at the top of the inclined plane, v = 3.00 m/s

The length of the inclined plane, l = 2.75 m

The angle at which the plane is tilted, θ = 22.0°

We have;

[tex]K_i[/tex] + [tex]U_i[/tex] = [tex]K_f[/tex] + [tex]U_f[/tex]

K = (1/2)×m×v²×(1 + I/(m·r²))

I = (2/5)·m·r²

K =  (1/2)×m×v²×(1 + 2/5) = 7/10 × m×v²

U = m·g·h

h = l×sin(θ)

h = 2.75×sin(22.0°)

∴ 7/10×4.75×3.00² + 4.75×9.81×2.75×sin(22.0°) = 7/10 × 4.75×[tex]v_f[/tex]² + 0

7/10×4.75×3.00² + 4.75×9.81×2.75×sin(22.0°) ≈ 77.93

∴ 77.93 ≈ 7/10 × 4.75×[tex]v_f[/tex]²

[tex]v_f[/tex]² = 77.93/(7/10 × 4.75)

[tex]v_f[/tex] ≈ √(77.93/(7/10 × 4.75)) ≈ 4.84

The final translational seed at the bottom of the ramp, [tex]v_f[/tex] ≈ 4.84 m/s.

Answer:

A. Contains DNA

C. Contains ribosomes

F. Lacks a nucleus

Explanation:

Answer: I hope you find it useful

Explanation: Group 2 elements have two valence electrons. The two valence electrons are easily lost in the formation of chemical bonds. Once the two electrons are lost, the atom then has a full outer shell and is therefore more stable.

so,  if an atom has valency 2 , then it means that the atom can combine with 2 other atoms .

(a) The recoil or backward velocity of the gun is 8 m/s.

(b) The bullet cannot penetrate the plank of the wood completely.

The given parameters include;

(a) The backward or recoil velocity of the gun is calculated by applying the principle of conservation of linear momentum.

m₁u₁  + m₂u₂ = 0

m₂u₂ = -m₁u₁

[tex]u_2 = -\frac{m_1u_1}{m_2} \\\\u_2 = - \frac{0.1 \times 400}{5} \\\\u_2 = -8 \ m/s[/tex]

Thus, the recoil or backward velocity of the gun is 8 m/s.

(b) determine if the bullet can penetrate the plank of the wood completely

the acceleration of the bullet is calculated as;

v² = u₁² + 2as

2as = v² - u²

[tex]a = \frac{v^2 -u_1^2}{2s} \\\\a = \frac{(266.67)^2 -(400)^2}{2\times 0.04} = -1.111 \times 10^6 \ m/s^2[/tex]

Finally, determine the distance traveled by the bullet when it comes to a complete stop, that is the final velocity = 0

[tex]v_f^2 = v^2 + 2ad\\\\2ad = v_f^2 - v^2\\\\d = \frac{v_f^2 - v^2}{2a} \\\\d = \frac{(0) - (266.67)^2}{2(-1.111\times 10^6)} \\\\d = 0.032 \ m[/tex]

d = 3.2 cm

The total distance traveled by the bullet inside the plank = 4 cm + 3.2 cm = 7.2 cm

Therefore, the bullet cannot penetrate the plank completely.

To learn more about linear momentum visit: https://brainly.com/question/15869303

Explanation:

If a coil of wire is placed in a changing magnetic field, a current will be induced in the wire. ... A changing magnetic field through a coil of wire therefore must induce an emf in the coil which in turn causes current to flow.

Due to the flow of the current run, the coil magnetic field is produced. Magnetic fields result in magnetic force.

The electric force between the two charges is directly propotional to the product of the charge and inversly propotional to the square of the distance between them.

A current will be generated in a wire coil if it is put in a changing magnetic field. As a result, a changing magnetic field through a coil of wire must create an emf in the coil, causing the current to flow.

A current is induced in a coil of wire when it is put in a changing magnetic field. Something generates an electric field that drives the charges around the wire, causing the current to flow.

Hence due to the flow of the current in the coil magnetic field is produced.

To learn more about the electric force refer to the link;

https://brainly.com/question/1076352

Answer:

The laws of liquid pressure are  

(i) Pressure inside the liquid increases with the depth from the free surface of the liquid.

(ii) Pressure is same at all points on a horizontal plane, in case of stationary liquid.

(iii) Pressure is same in all directions about a point inside the liquid.

(iv) Pressure at same depth is different in different liquids. It increases with the increase in the density of the liquid.

(v) A liquid will always seek its own level.

A Fluid is any liquid or gas or generally any material that cannot sustain a tangential, or shearing, force when at rest.  

Explanation:

Answer:

1845.26 ?

Explanation:

18.46 × 99.96= 1845.2616 = 1845.26

im not entirely sure though

Answer:

Explanation:

(a) It is given that Joseph jogs on a straight road of 300m in a time interval of 2 minutes and 30 seconds, which is equal to 150seconds. Therefore, when Joseph jogs from point A to point B, he covers a distance of 300m in time of 150seconds. Hence, his average speed is 300m/150s=2ms^−1. Since it is a straight road and he jogs in a single direction in this case, his displacement is equal to 300m. Since it is a straight road and he jogs in a single direction in this case, his displacement is equal to 300m.

Hence, his average velocity is 300m/150s=2ms^−1

(b) Then it is given that he turns back and points B and jogs on the same road but in the opposite direction for a time interval for 1 minute and covers a distance of 100m.If we consider the whole motion of Joseph, i.e. from point A to point C, then he covers a total distance of 300m+100m=400m. And he covers this total distance in a time interval of 2.5min+1min=3.5min=210s.

Therefore, his average speed for this journey is 400m210s=1.9ms−1.

For the same journey is displacement is equal to the distance between the points A and C,i.e. 300m−100m=200m.

Hence, his average velocity for this case is 200m/210s=0.95ms^−1

Answer:

14 years

Explanation:

because the light will take four years to reach the earth. And the star is four light years away from the earth.

An imaginary star is four light years from earth. The star has a planet, upon which a large mirror has been installed. The mirror faces earth. A ten year old boy aims his telescope at the mirror,then the boy would be 14 years old when he will see his own reflection.

It can be defined as the distance travelled by the light in one year .it is represented in units of distance such as miles or km.

1 light year is calculated by multiplying the speed of light with the time of one year

1 light year = speed of light × one year time period

1 light year = 3×10⁸ ×(365×24×60×60)

                  =9.461× 10¹⁵ meter

As given in the problem 10 year old boy aims his telescope at the mirror which is 4 light years away then the light has to travel four years to reach the boy ,then the boy would be 14 year old when he would see his own reflection.
Learn more about light year from here

https://brainly.com/question/1302132
#SPJ2

Answer:

5 m/s²

Explanation:

Use the acceleration formula: [tex]a=\frac{v_f-v_i}{t}[/tex]

Based on the information given to us by the prompt, we know:

Substitute these values for the variables to calculate the acceleration:

[tex]a=\frac{30-10}{4}\\\\a=\frac{20}{4}\\\\a=5[/tex]

Therefore, the acceleration of the bus is 5 m/s².

Answer:

hi

Explanation:

pls mark as a BRAINLIST

Answer:

Wait until the end of the semester to complete all work.

Explanation:

this is the obvious answer.

please mark me brainliest

Answer:

Wait until the end of the semester to complete all work

Answer:

The separation between the two stones is 36 m, when the second stone is approximately 10.9 m below the top of the cliff

Explanation:

The given parameters are;

The height of the cliff from which the stones are dropped, h = 60 m

The time at which the second stone is dropped = 1.6 seconds after the first

The distance below the top of the cliff when the distance between the two stones is 36 m = Required

We have;

The kinematic equation of motion that can be used is s = u·t - (1/2)·g·t²

For the first stone, we have, s₁ = u·t₁ - (1/2)·g·t₁²

For the second stone, we get; s₂ = u·t₂ - (1/2)·g·t₂²

t₁ = t₂ + 1.6

g = The acceleration due to gravity ≈ 9.81 m/s²

s = The distance below the cliff top

The initial velocity of the stones, u = 0

Let t represent the time from which the second stone is dropped at which the distance between the two stones is 36 m, we have;

s₁ = u·(t + 1.6) + (1/2)·g·(t + 1.6)²

s₂ = u·t + (1/2)·g·t²

u = 0

∴ s₁ - s₂ = 36 =  (1/2)·g·(t + 1.6)² - (1/2)·g·t²

2 × 36/(g) = (t + 1.6)² - t²  = t² + 3.2·t + 2.56 - t² = 3.2·t + 2.56

2 × 36/(9.81) = 3.2·t + 2.56

t = (2 × 36/(9.81) - 2.56)/3.2 =  ≈ 1.49 s

t ≈ 1.49 s

s₂ = (1/2)·g·t²

∴ s₂ = (1/2) × 9.81 × 1.49² ≈ 10.9

The distance below the top of the cliff of the second stone when the the separation between the two stones is 36 m, s₂ ≈ 10.9 m.

Almost 3 times fast than normal pulley system

mark me

Explanation:

string roller is called an example of wheel and axel because The thin rod which needs to be turned is called the axle and the wider object fixed to the axle, on which we apply force is called the wheel.

hence the we apply force on the roller and the string gets tight.

Tomando en cuenta la Ley de Charles y la condiciones dentro del recipiente, tenemos las siguientes conclusiones con respecto al volumen del recipiente:

1) El volumen inicial del gas es 144.203 mililitros.

2) El volumen final del gas es 386.986 mililitros.

La Ley de Charles establece que el Volumen de un gas es directamente proporcional a su Temperatura, basados en este hecho, podemos resolver los problemas en cuestión mediante la siguiente relación matematica:

[tex]\frac{V_{1}}{T_{1}} = \frac{V_{2}}{T_{2}}[/tex] (1)

Donde:

[tex]V_{1}[/tex] - Volumen inicial, en mililitros.

[tex]V_{2}[/tex] -  Volumen final, en mililitros.

[tex]T_{1}[/tex] - Temperatura inicial, en Kelvin.

[tex]T_{2}[/tex] - Temperatura final, en Kelvin.

1) Si sabemos que [tex]V_{2} = 150\,mL[/tex], [tex]T_{2} = 388.15\,K[/tex] and [tex]T_{1} = 373.15\,K[/tex], entonces el volumen inicial del gas es:

[tex]V_{1} = \frac{T_{1}}{T_{2}}\times V_{2}[/tex]

[tex]V_{1} = \frac{373.15\,K}{388.15\,K}\times 150\,mL[/tex]

[tex]V_{1} = 144.203\,mL[/tex]

El volumen inicial del gas es 144.203 mililitros.

2) Si sabemos que [tex]T_{1} = 473.15\,K[/tex], [tex]V_{1} = 350\,mL[/tex] and [tex]T_{2} = 523.15\,K[/tex], entonces el volumen final del gas es:

[tex]V_{2} = \frac{T_{2}}{T_{1}}\times V_{1}[/tex]

[tex]V_{2} = \frac{523.15\,K}{473.15\,K}\cdot 350\,mL[/tex]

[tex]V_{2} = 386.986\,mL[/tex]

El volumen final del gas es 386.986 mililitros.

He aquí una pregunta relacionada con la Ley de Charles: https://brainly.com/question/21184611

Answer:

Pascal is a derived unit because it cannot be expressed in any physics terms, but it is an expression of fundamental quantities.

Explanation:

[tex]{ \sf{Pasacal \: ( Pa) = \frac{newtons}{metres {}^{2} } }} \\ \\ { \sf{Pasacal \: (Pa) = \frac{kg \times {ms}^{ - 2} }{ {m}^{2} } }}[/tex]