What type of volcanic material indicates an eruption under water?
a) AA flows
b) Pyroclastic flows
c) Pillow lavas
d) Pahoehoe flows
Pillow lava-type volcanic material indicates an eruption underwater. Option C is correct.
The flow of lava at bottom of the water is known as pillow lavas. They have elongated, interconnected flow lobes that are circular or elliptical in cross-section. Pillow lavas are considered as important when trying to decipher old rock sequences because they indicate the presence of water.
Submarine volcanoes are underwater vents or volcanoes on the Earth's surface from which magma can erupt. If the gas content is low, and viscosity is high then the lava will pile up over the vent to produce a lava dome or volcanic dome
To know more about Submarine volcanoes:
https://brainly.com/question/28943391
when two species compete for resources the fitness of: only the poor competitor will decrease. only the better competitor will increase. both competitors will remain the same. both species will decline.
When two species compete for resources, the outcome of the competition will depend on the relative fitness of each. The fittest species will outcompete the less fit species, and its fitness will increase as a result.
The less fit species, however, will not be able to access the resources it needs and its fitness will consequently decrease. In some cases, both species may experience a decline in fitness if resources become so scarce that neither species can maintain its population size.
Ultimately, the more fit species will triumph and the less fit species will become less abundant or disappear entirely. In conclusion, competition between two species is usually an unequal battle, and the outcome is usually determined by the relative fitness of the competitors.
Know more about triumph here
https://brainly.com/question/9754521#
#SPJ11
Since autotrophic organisms require inorganic carbon for growth and heterotrophic organisms require organic carbon for growth, we can say that?
Since autotrophic organisms require inorganic carbon for growth and heterotrophic organisms require organic carbon for growth, we can say that autotrophic organisms are self-sufficient, while heterotrophic organisms depend on others to live.
The growth of autotrophic organisms is sustained by inorganic carbon compounds, which they convert into organic carbon molecules for energy production.
Autotrophs are responsible for generating their own food, while heterotrophs must consume food from other organisms for their nutrition and growth.
The key difference between autotrophic and heterotrophic organisms is that autotrophic organisms generate their own food, while heterotrophic organisms consume other organisms to live.
In general, autotrophs are considered to be the foundation of the food chain since they are the first to produce organic carbon molecules from inorganic carbon molecules.
TO KNOW ABOUT autotrophic organisms :
https://brainly.com/question/24829220
#SPJ11
which methods could you use to calculate the x-coordinate of the midpoints of a horizontal line segment with endpoints at (0,0) and (20,0)?
By dividing 20 by 0 we can calculate the x-coordinate of the midpoints of a horizontal line segment with endpoints at (0,0) and (20,0).
I'll omit the "y" values from another midpoint calculation as we're only working with x coordinates right now. Although I could build the midway formula, it is much simpler to understand what it means.
The centre, which would be the average of the alignment, should always be known whenever a line's midway is determined. The same average is determined by adding the two integers and then dividing the result by two.
Learn more about line segment here:
https://brainly.com/question/30072605
#SPJ1
What type of plate boundary causes explosive volcanoes?
Answer:
Explanation:
Explosive volcanoes are typically associated with convergent plate boundaries, where two tectonic plates are colliding with each other. More specifically, explosive volcanoes are often found at subduction zones, where one tectonic plate is forced beneath another into the Earth's mantle. As the descending plate moves deeper into the Earth, it is subjected to increasing pressure and temperature, causing it to partially melt and generate magma. This magma is less dense than the surrounding rock, so it rises towards the Earth's surface, eventually erupting as a volcano. The magma produced at subduction zones is often rich in gas and silica, which can contribute to explosive eruptions.
Silicon Valley is ________.
A
not part of the rest of California because it is its own region
B
a region we can define by its industry
C
a city and not a region
D
not a part of the rest of California because it doesn’t share the same industry
Absence of the sky condition and visibility on an ATIS broadcast indicates that . . .
The absence of the sky condition and visibility on an ATIS broadcast indicates that the information is not available or the conditions are below a certain threshold.
ATIS stands for Automatic Terminal Information Service, which is an automatic broadcast system that provides pilots with updated information on specific airports' meteorological and operational circumstances.
When approaching or departing an airport, pilots may use this system to collect up-to-date weather and safety data. Pilots are advised to use this technology to enhance safety and reduce the likelihood of accidents, as well as to provide real-time updates to ground crews in order to coordinate landing and takeoff procedures.
The absence of sky condition and visibility on an ATIS broadcast indicates that either the information is not available or the conditions are below a certain threshold, according to FAA regulations.
Thus, the absence of the sky condition and visibility on an ATIS broadcast indicates that the information is not available or the conditions are below a certain threshold.
For such more question on threshold:
https://brainly.com/question/27228680
#SPJ11
Which of the following best describes the possible outcome of creating a ta
free banking zone in a country?
OA. International investors will avoid that zone
OB. International investors will be attracted to that zone
OC. Government regulations may be lifted in other countries
OD. The local economy will suffer as tax income decreases
Option b: The most likely outcome of creating a tax-free banking zone in a country would be International investors will be attracted to that zone, as it could potentially offer lower tax rates and greater financial incentives.
In geography, a zone refers to an area characterized by certain environmental or climatic conditions. The classification of land into zones is based on various factors such as climate, topography, vegetation, soil, and human activities
There are different types of zones in geographies such as climate zones, vegetation zones, and biomes. Climate zones are based on temperature and precipitation patterns. Vegetation zones are defined by the type of vegetation found in an area. Biomes are similar to vegetation zones but are based on similar climate patterns rather than specific types of vegetation. Other types of zones include administrative zones, economic zones, and time zones.
Zoning plays an important role in environmental management, natural resource conservation, and urban planning. It can help in the allocation and management of resources, and control the impact of human activities on the environment. Zoning can also be used for disaster management purposes by identifying areas that are prone to natural hazards such as flooding, earthquakes, and landslides. Understanding zones is essential for making informed decisions about land use, resource management, and environmental protection.
Learn more about zone here:
https://brainly.com/question/30010623
#SPJ1
The photograph below shows a roadcut, a human-made outcrop (rock exposure) alongside the highway. The gray layers are shale and the tan layers are sandstone. The students studying this outcrop made the following observations: 1. Fossils of marine invertebrates occur in the dark shale at the base of the outcrop. 2. Fossils of plants that grow in swamps occur in the sandstone near the top. 3. The lowermost sandstone layer fills a channel cut down into the shale below. Which of the following are reasonable interpretations of depositional environments of the sediments from which these rocks formed?there are two correct answers The sandstone was deposited near the coast. The shale was deposited on a floodplain. The shale was deposited in a lake. The sandstone was deposited in a mountainous, rocky environment. The sandstone was deposited in an inland desert. The shale was deposited in the ocean.
The observations made by the students indicate that the sediments from which the rocks formed were deposited in different environments. Based on their observations,
the reasonable interpretations are that the sandstone was deposited near the coast and the shale was deposited on a floodplain.
The presence of marine invertebrates in the shale suggests that it was deposited in a lake, while the presence of plants that grow in swamps suggests that the sandstone was likely deposited in a humid environment near the coast.
The lowermost sandstone layer filling a channel cut down into the shale also suggests that it was deposited near the coast. The sandstone was not deposited in an inland desert or the shale in the ocean, as these environments do not match the observations made by the students.
Know more about interpretations here
https://brainly.com/question/30932003#
#SPJ11
which national park is home to a large volcanic caldera?Yellowstone National ParkAniakchak Caldera in Aniakchak National Monumenlake toba
Yellowstone National Park is home to a large volcanic caldera because it is situated on top of a "hot spot" in the Earth's mantle, where a column of molten rock rises from its interior towards the surface.
The correct answer is Yellowstone National Park.
This hot spot has been active for millions of years, causing volcanic activity that has led to the caldera's formation. The most recent major eruption occurred approximately 640,000 years ago, creating the current caldera, and numerous more minor eruptions have occurred since then.
Yellowstone National Park, located primarily in the US state of Wyoming, was established in 1872 and is considered the first national park in the world. The park is known for its geothermal features, such as geysers, hot springs, and mud pots, caused by volcanic activity underneath the surface.
To know more about Yellowstone National Park, visit:
https://brainly.com/question/4031039
#SPJ4
what happens on either side of the equilibrium line in a glacier?
Answer:
Above the equilibrium line, the glacier is in the accumulation zone where there is a net gain of ice mass. On the other hand, below the equilibrium line, the glacier is in the ablation zone where there is a net loss of ice mass due to melting and calving. As the glacier moves, it erodes the land around it in two ways: by plucking and abrasion. Plucking occurs when rocks get frozen to the base, sides, and back wall of the glacier, and the movement of the glacier pulls these frozen rocks away. Abrasion occurs when rocks trapped in the glacier rub against the valley floor, wearing it away like sandpaper.
Explanation:
The glacier equilibrium line is the point of transition between the accumulation zone and the ablation zone. Above the equilibrium line, the rate of snowfall is greater than the rate of melting, so not all of the snow that falls each winter melts during the following summer, and the ice surface is always covered with snow. Therefore, the part of a glacier above the equilibrium line is where there is a net gain of ice mass. As snow gradually accumulates above the equilibrium line, it is compressed and turned into firn within which t,he snowflakes lose their delicate shapes and become granules. With more compression, the granules are pushed together and air is squeezed out. Eventually, the granules are “welded” together to create glacial ice .
Below the equilibrium line, the rate of melting is greater than the rate of snowfall, so there is a net loss of ice mass due to melting and calving. Therefore, the part of a glacier below the equilibrium line is where there is a net loss of ice mass . The position of the equilibrium line changes from year to year as a function of the balance between snow accumulation in the winter and snowmelt during the summer. More winter snow and less summer melting obviously favors the advance of the equilibrium line (and of the glacier’s leading edge), but of these two variables, it is the summer melt that matters most to a glacier’s budget .
The terminus of a glacier advances or retreats based on the location of the equilibrium line. If the rate of forward motion of the glacier is faster than the rate of ablation (melting), the leading edge of the glacier advances (moves forward). If the rate of forward motion is about the same as the rate of ablation, the leading edge remains stationary, and if the rate of forward motion is slower than the rate of ablation, the leading edge retreats (moves backward) .
1) Which is the least developed region among the following? A) North America B) Eastern Europe C) Southwest Asia D) Western and Central Europe E) East Asia.
Southwest Asia, also known as the Middle East, is considered the least developed region because it has been plagued by political instability, conflicts, and wars for several decades, severely impacting its economic growth and development.
The correct option is C.
Many countries in the region heavily rely on oil and gas exports, making them vulnerable to global oil price fluctuations. And the region has a high poverty rate, particularly in countries like Yemen, Syria, and Iraq, which have been severely impacted by conflict and displacement.
The region faces significant environmental challenges, including water scarcity, desertification, and air pollution. The region's arid climate and overuse of water resources have led to water scarcity in many areas, negatively impacting agriculture and human health.
To know more about Southwest Asia, visit:
https://brainly.com/question/9697255
#SPJ4
the sequence of deposition is a puzzle that geologists often have to solve. study the relative positions of the rock layers while considering how this outcrop formed, and then read the following statements and determine which are correct. select the three that apply. view available hint(s)for part d the sequence of deposition is a puzzle that geologists often have to solve. study the relative positions of the rock layers while considering how this outcrop formed, and then read the following statements and determine which are correct.select the three that apply. the environmental conditions (e.g., wind, amount of ash) were similar during deposition of these sediments. a close inspection of the sediments near the measuring stick shows no evidence of erosion or weathering. there is a large clast (a fragment of rock) that appears to be different from and inserted into the sediment. the layer at the bottom of the measuring stick was deposited prior to the layer at the top of the measuring stick. there is evidence of changes in how sediment was transported during deposition of these sediments.
The correct statements that apply are: The environmental conditions were similar during deposition of these sediments. A close inspection of the sediments. The layer at the bottom of the measuring stick.
The given question is asking about the correct statements related to the sequence of deposition that geologists often solve. The correct statements that apply are: The environmental conditions (e.g., wind, amount of ash) were similar during deposition of these sediments.There is a large clast (a fragment of rock) that appears to be different from and inserted into the sediment.There is evidence of changes in how sediment was transported during deposition of these sediments.
The sequence of deposition refers to the order of the rock layers present at a site. It is a puzzle that geologists often have to solve. To solve this puzzle, geologists study the relative positions of the rock layers and consider how this outcrop formed by taking into account the geological processes that were involved in forming the rock layers. A close inspection of the sediments near the measuring stick shows no evidence of erosion or weathering. This statement is incorrect.
Erosion and weathering are processes that are involved in the formation of rock layers.There is evidence of changes in how sediment was transported during the deposition of these sediments. This statement is correct.
Changes in how sediment was transported can cause changes in the size, shape, and sorting of the sediments. These changes can be used to interpret the depositional environment.The layer at the bottom of the measuring stick was deposited prior to the layer at the top of the measuring stick. This statement is a common sense observation that has been provided as an option to be misleading. It does not give any insight into the depositional sequence.The environmental conditions (e.g., wind, amount of ash) were similar during the deposition of these sediments. This statement is correct.
Similar environmental conditions can result in similar depositional environments, which can result in similar sedimentary rock sequences.There is a large clast (a fragment of rock) that appears to be different from and inserted into the sediment. This statement is correct.
The presence of a different type of rock can indicate a different depositional environment, such as a sudden influx of material from a nearby source.
Learn more about deposition of a sequence: brainly.com/question/13030140
#SPJ11
How do humans affect the lithosphere? Is this relationship positive, negative, or both? Explain your answer
Answer:trttmme
Explanation:
True or False: The total amount of water on Earth is constantly changing.
what is geography?
Answer:
false
Explanation:
The country of ____ is a volcanic plateau built of basaltic lava erupted from a hot spot underlying the Mid-Atlantic Ridge in the North Atlantic Ocean.
The country of Iceland is a volcanic plateau built of basaltic lava erupted from a hot spot underlying the Mid-Atlantic Ridge in the North Atlantic Ocean.
The country that fits this description is Iceland. Iceland is located in the North Atlantic Ocean and is situated over a volcanic plateau built of basaltic lava erupted from a hot spot underlying the Mid-Atlantic Ridge. This volcanic activity is responsible for the creation of Iceland's unique landscapes, which include geysers, hot springs, and glaciers, among others.
The country is also known for its frequent volcanic eruptions, some of which have had significant impacts on the environment and local communities.
To know more about Iceland HERE
https://brainly.com/question/19809568
#SPJ4
the earth has seasons due to its tilt. three pieces of evidence proving this is the case are given below. please identify the one statement below that is not one of the pieces of evidence. question 1 options: the earth's elliptical orbit: the change in distance to the sun within the ellipse is only a few percent, which is not enough to cause the seasonal changes. simultaneously opposite seasons: the northern and southern hemispheres experience opposite seasons simultaneously, which is not possible if the changing distance was responsible for the changing seasons. the earth's closest approach: the earth's closest approach to the sun occurs in january one of the coldest months in the northern hemisphere the solar system's motion: the solar system is moving within the milky way galaxy itself, which causes the tilt of the earth.
The earth has seasons due to its tilt. Three pieces of evidence proving this is the case are given below.
Evidence to support the idea that the earth has seasons due to its tilt include:
Simultaneously opposite seasons: The northern and southern hemispheres experience opposite seasons at the same time,
which would not be feasible if the changing distance was the source of the changing seasons.
The earth's closest approach: The earth's closest approach to the sun takes place in January, one of the coldest months in the northern hemisphere.
The solar system's motion: The solar system is moving within the milky way galaxy itself, which causes the earth's tilt.
The earth's elliptical orbit: The change in distance to the sun within the ellipse is just a few percent, which isn't enough to cause seasonal changes.
Conclusion: The earth has seasons due to its tilt, with the northern and southern hemispheres experiencing opposite seasons at the same time.
The earth's closest approach to the sun takes place in January, which is one of the coldest months in the northern hemisphere.
The solar system's motion causes the earth to tilt, and the change in distance to the sun within the ellipse is only a few percent, which is insufficient to cause seasonal changes.
To know more about Season change here
https://brainly.com/question/8760061
#SPJ11
a mass movement in which a cohesive block of earth or rock slips downhill relatively quickly in one piece along a zone of weakness is called a
Answer: Landslide
Explanation:
1. Map Activity: The Development of the Industrial Revolution Cartographers represent economic systems and changes on economic maps. What follows are two economic maps that portray changes in Europe during the Industrial Revolution. Consider the first map, which portrays the Industrial Revolution in Europe in 1850, and use it to answer the questions that follow. NORWAY FINLAND 2 2 50 500 750 Kilometers 250 500 Miles Poslo Saint Petersburg .no Stockholm LIVONIA North SWEDEN Paltic Sea COURLAND Sea DENMARK "Copenhagen Glasgowo Edinburgh GREATA BRITAIN BRI Bradito Liverpool 0 Leeds Hamburg PRUSSIA RUSSIA sula Berlin Liverpool Sheffield ManchesteAA NETHERL Birmingham ondon Bristo Bo Lond Amsterdam Brussels BELGIUM de Breslau, POLAND, Warsaw nec NY prague Pans 4 BOHEMIA GALICIA Atlantic Ocean FRANCE Munich (Buda WITZERLAND AUSTRIA-HUNGARY Do te venice DM Qanun Bordeaux Turin DaGenoa Marseilles Florence ITALY Ebro R SERBIA OTTOMAN EMPIRE Rome PORTUGAL SPAIN Mediterranean sea Banks Manufacturing and industrial areas No peasant emancipation before 1848 Railways by 1850 Major cities: 1820 A Coal mining Iron industry Textile industries 1850 Silk industries The Industrial Revolution greatly changed both the European landscape and its culture. Where quiet villages once stood, large factory complexes were built. Peasants who had previously worked in cycles with the harvest became subject to factory discipline and daily work, and many moved into growing cities. The changing economic life of Europeans transformed the face of the continent. Based on the map, what can you conclude about the development of the iron industry in Europe? O Berlin was the most important iron-producing center in Europe. O The iron industry often prospered near coal mines. O France was Europe's leading iron producer. Similarly, what can you conclude about industrial development in Britain? O Britain had no competition from the European continent in the textile industry in 1850. O Britain was the most industrially developed state in 1850, and it led Europe in almost every industry. O Britain had a developed textile industry, but it lacked a developed coal mining industry. Now, consider this map of continental Europe, and use it to answer the question that follows. 190 200 Km DENMARK Baltic Sea North Sea Railroads completed, c. 1850 Major exposed coal deposits Emerging industrial areas Scattered ironworks Benoder Warsaw POLAND Odes Posen Hamburg NETHERLANDS Bremen ENGLAND Amsterdam Cotton RUHR Essen de color Kassel GERMAN Lider Dieppe Le Havre BELGIUM Frankfurt Rouen Cotton cotton Linen A ussels cologne Lege Breslau CONFEDERATION SI Kraków Lemberg Prague Linen Pans MPIRE Linen Nantes -Orléans Munich wool Munich Lizen Linza FRANCE P Budapest HUNGARY Bay of Biscay AUSTRIAN Mulhouse Mulhouse Le Creusot Zurich SWITZERLAND Lyons . KINGDOM Milan Grenoble of Turin SARDINIA PARMA Avignon Genos o Trieste & Venice Venice CROATIA BOSNIA ARDINIA PARLAR SERBIA Toulouse Adriatic sik Florence Livorno TUSCANY OTTOMAN EMPIRE PAPAL Marseilles Mediterranean Sea STATES Sea What can you conclude about France and Germany by looking at the railroads on this map? O Germany and France built their systems together in an effort to increase transnational commerce. O By 1850, the German states had laid more railroad track than France. O By 1850, France had laid more railroad track than the German states.
Based on the first map, you can conclude that the iron industry often prospered near coal mines, and that Britain had a developed textile industry, but lacked a developed coal mining industry.
What is industry?Industry is the economic activity of producing goods and services within an economy. It is a major component of economic activity and is a major factor in economic growth. Industries are categorized into three main sectors: primary, secondary, and tertiary. Primary industries are those that extract or harvest raw materials from the environment, such as farming, fishing, and mining. Secondary industries are those that process raw materials into finished products, like manufacturing and construction. Tertiary industries are those that provide services to the other two sectors, such as transportation, finance, and education. Industries are vital to a country's economy, as they produce goods and services to meet the needs of consumers.
From the second map, you can conclude that by 1850, France had laid more railroad track than the German states.
To learn more about industry
https://brainly.com/question/5501800
#SPJ1
Why do the tributaries in landscapes (fold mountains) join the main stream at a 90° angle?
Atmospheric deposition is receiving increased attention in the scientific community, and has become the subject of a specific research area in the environmental sciences. Acid rain is detrimental to our ecosystems and can be measured in several ways. Which of the following methods would best identify changes from acid deposition in an area over time?
a. Calculating the change in sulfur dioxide emissions from coal-burning power plants over time
b. Mapping out coal-burning power plant locations over the past 50 years
c. Measuring the pH of rainwater and surface water in affected areas
d. Monitoring the long-term chemical and biological parameters of an ecosystem
Option-C:The best method for identifying changes in acid deposition over time in a region is "measuring the pH of rainwater and surface water in affected areas."
These pollutants react with atmospheric water to produce sulfuric acid and nitric acid, respectively, leading to acid rain. Acid deposition can cause harm to the natural environment and human health, which has led to an increased scientific interest in it. Acid deposition can be monitored in several ways, such as the measuring the pH of rainwater and surface water in affected areas, or monitoring the long-term chemical and biological parameters of an ecosystem.
Nonetheless, measuring the pH of rainwater and surface water in affected areas is the best method for identifying changes in acid deposition over time in a region. Atmospheric deposition refers to the transfer of air pollutants from the atmosphere to the earth's surface through both wet and dry processes. Thus the correct answer is OptionC.
For such more questions on Atmospheric deposition:
brainly.com/question/14708411
#SPJ11
Place the following regions of the sun in order of increasing radius a. corona b. core c. radiative zone d. convective zone e. chromosphere f. photosphere
The following regions of the sun in order of increasing radius, from the inside out they are the core, the radiative zone, the convective zone, the photosphere, the chromosphere, and the corona.
From smallest to largest, the order of these regions is the core, radiative zone, convective zone, photosphere, chromosphere, and corona. The core is the innermost layer and is the hottest part of the sun, with temperatures ranging from 10-15 million degrees Celsius.
This is where nuclear fusion takes place, converting hydrogen into helium and releasing tremendous amounts of energy. The radiative zone is the layer surrounding the core, and temperatures here range from 1-2 million degrees Celsius. This is where energy produced in the core is transported outward. The convective zone is the layer below the photosphere, and temperatures here range from 1-2 million degrees Celsius.
This is where hot gas is transported to the surface in a process called convection. The photosphere is the visible layer of the sun and is the brightest part of the sun. Temperatures here range from 5,000-6,000 degrees Celsius.
The chromosphere is the layer above the photosphere and is much hotter than the photosphere, with temperatures reaching 20,000 degrees Celsius. The corona is the outermost layer of the sun and is the hottest part, with temperatures reaching 2-3 million degrees Celsius. This layer is composed of hot, ionized gas and is the source of solar winds.
Know more about the sun here:
https://brainly.com/question/1286910
#SPJ11
Looking at the VEI, please discuss the relationship between frequency and classification of volcanoes.
The Volcanic Explosivity Index (VEI) is a method used to classify and quantify the size of volcanic eruptions. It is based on how much material is expelled, how high it is ejected, and how long the eruption lasts.
The VEI ranges from 0 to 8, with 8 being the most explosive. The higher the VEI, the more frequent and violent the eruptions are. As the VEI increases, so does the frequency of eruptions.
VEI 8 eruptions are very rare, occurring once every few centuries, whereas VEI 4 eruptions occur between once every year to once every few decades.
The frequency of eruptions is also affected by the type of volcano. Stratovolcanoes tend to have more explosive eruptions than shield volcanoes. In general, the frequency of eruptions increases with the VEI classification. As the VEI increases, eruptions are more frequent and violent, and the potential for destruction is greater.
Know more about volcanic eruptions here
https://brainly.com/question/30028532#
#SPJ11
Identify at least three ways the mountain people of Nepal earn a living
The mountain people of Nepal, who live in remote areas with difficult terrain, have developed a variety of economic activities to sustain themselves and their families. Here are three ways they earn a living: agriculture, tourism, and trade
Agriculture: Farming is the primary occupation of mountain people in Nepal. They cultivate crops like rice, maize, millet, potatoes, and vegetables, using traditional farming practices such as terracing to maximize land use. They also raise livestock such as cows, goats, sheep, and yaks for meat, milk, and wool.
Tourism: Many mountain people in Nepal live near popular trekking routes, and they earn a living by providing services to tourists such as guides, porters, and homestay accommodations. They also sell handicrafts like traditional textiles, pottery, and jewelry to tourists.
Trade: Mountain people in Nepal often engage in trade with nearby villages or towns. They may collect and sell forest products such as herbs, honey, and timber, or trade goods like salt, tea, and clothing. Some mountain people also work as laborers in construction or transportation, building roads and bridges or carrying goods by pack animal or on foot.
To learn more about mountain people
https://brainly.com/question/29813178
#SPJ4
what are the effects on metamorphic minerals and textures of temperature confining pressure and differential stress
Metamorphic minerals and textures are significantly affected by temperature, confining pressure, and differential stress. Temperature affects the rate of metamorphic reactions, which affects the mineralogy of the metamorphic rock.
High temperatures can cause dehydration, recrystallization, and metasomatism of the minerals. Confining pressure has an important role in metamorphism, providing the force to cause recrystallization and transformation of the minerals. As pressure increases, the minerals become more densely packed.
Differential stress affects the shape and size of the minerals and the overall texture of the rock. It causes minerals to become elongated and aligned in certain directions, creating a foliation. Additionally, differential stress can cause shearing and fracture of the minerals. The combination of temperature, confining pressure, and differential stress is important for understanding the formation of metamorphic rocks.
Know more about recrystallization here
https://brainly.com/question/15703840#
#SPJ11
Below are listed reasons why regions have either higher or lower elevations. Choose all the possible causes of higher elevations.
A. More dense materials are present in the crust
B. Warmer rocks are in the subsurface.
C. Less dense materials are present in the crust.
D. Region has thick crust.
E. Cooler rocks are inthe subsurface
F. Region has thin crust.
There are many possible reasons why a region has higher or lower elevations. the possible causes of higher elevations are more dense materials are present in the crust, the region has a thick crust and cooler rocks are in the subsurface.
Dense materials, such as granite and basalt, tend to have higher elevations. These rocks are denser than the surrounding rocks and tend to resist erosion, resulting in higher elevations. As a result, mountains are frequently made up of these types of rocks. Because of its high elevation, the Tibetan Plateau is one of the most elevated regions in the world. Thus, the given option "More dense materials are present in the crust" is a possible cause of higher elevations.
Regions with thicker crusts typically have higher elevations. As a result, mountain ranges are often associated with thick crusts. For example, the Himalayas were formed as a result of the Indian plate colliding with the Asian plate, which resulted in the formation of a mountain range. Thus, the given option "Region has thick crust" is a possible cause of higher elevations.
Cooler rocks, such as granite and basalt, tend to have higher elevations because they are denser than the surrounding rocks and resist erosion, as previously stated. The fact that these rocks are cooler means that they are less likely to have been subjected to erosion and that they are better at withstanding the forces of erosion. For example, the Appalachian Mountains were created as a result of an upward thrusting of the underlying rocks due to plate tectonics. Thus, the given option "Cooler rocks are in the subsurface" is a possible cause of higher elevations.
Thus, the possible causes of higher elevations among the given options are "More dense materials are present in the crust," "Region has a thick crust," and "Cooler rocks are in the subsurface." Therefore, the correct options are A, D, and E.
Learn more about lower elevations at https://brainly.com/question/30721235
#SPJ11
More dense materials are present in the crust, Region has thick crust, . Cooler rocks are in the subsurface.
Higher altitudes are more common in dense rocks like granite and basalt. Since these rocks tend to withstand erosion and are denser than the nearby rocks, greater heights are produced. Because of this, mountains are usually composed of these kinds of rocks. Higher altitudes are frequently seen in areas with thicker crusts. The idea of thick crusts being connected with mountain ranges is a product of this. Since cooler rocks are denser and more resistant to erosion than their surroundings, such as granite and basalt, they typically have higher altitudes.
Learn more about high altitude here:
https://brainly.com/question/3785877
#SPJ1
In an experiment using column chromatography to seperate ferrocene and acetylferrocene, does solvent order matter? Would the separation work if the column is eluted with 50 % acetone in heptanes followed by heptanes? Explain. Info for question- heptane was used in lab first to get ferrocene in one beaker and then 50 % acetone in heptanes was used to get acetylferrocene in one beaker.
The discount point is 6.02. A preparative method called column chromatography is used to separate substances based on how polar or hydrophobic they are.
[tex]$$\begin{aligned}\text { Discount } & =1-\left(\left(\frac{\frac{0.14}{12}}{1-\left(1+\frac{0.14}{12}\right)^{-25 \times 12}}\right) \times\left(\frac{1-\left(1+\frac{0.15}{12}\right)^{-25 \times 12}}{\frac{0.15}{12}}\right)\right) \\& =1-0.012038 \times \frac{0.975929}{0.0125} \\& =1-0.939828 \\& =0.060172\end{aligned}$$[/tex]
Therefore, the discount point is 6.02
What is column chromatography?It is a precursory method for purifying substances based on how hydrophobic or polar they are. The molecular mixture in this chromatography procedure is divided based on how differently it partitions between a stationary phase and a mobile phase.
Learn more about chromatography
https://brainly.com/question/30907934
#SPJ4
Part A - Cloud Types describes. There are three basic types of cloud: cirrus, cumulus, and stratus. Match each of the following items to the type of cloud Drag the appropriate items into their respective bins. View Available Hint(s) Reset Help The cloud family found at the highest altitudes Are larger and have no distinct individual cloud units High, white, and thin Sheets or layers covering most or all of the sky Have a cauliflower appearance Have a feathery appearance Comprised of globular, individual cloud masses Cirrus Cumulus Stratus Submit Part B - Raindrop formation The maximum radius for cloud droplets is about 0.05 millimeters. However, typical raindrops have volumes thousands of times greater. Let's examine how these tiny cloud droplets turn into raindrops. Forming raindrops occurs within cumulus (cumulonimbus) and stratus (nimbostratus) clouds via the Bergeron process or the collision-coalescence process. The Bergeron process is active at subfreezing temperatures. • Ice crystals grow from supercooled water droplets-tiny water droplets that are liquid below the freezing point of water. • If a cloud is saturated with water, it is supersaturated with ice. Therefore, as ice crystals form, water droplets evaporate to replenish the water vapor used in forming ice crystals. • These ice crystals can grow large enough to fall to the ground, melting to form raindrops as they reach higher temperatures during decent. For the collision-coalescence process: • Larger water droplets collide and join with other water droplets, eventually forming raindrops that are large and heavy enough to fall to the ground. When these water droplets have more of an opportunity to collide with other water droplets (e.g., in taller clouds or because of updrafts), they are better able to form raindrops. • Additionally, because the droplets are not all exactly the same size, they will move at different rates, increasing the likelihood of collisions. • This rainfall can be measured using reflectivity. A higher rate of rainfall reflects more light than lower rainfall rate, so it is possible to determine the rate of rainfall using reflectivity. Select all that apply. View Available Hint(s) Rain forms via the collision-coalescence process when larger water droplets combine with other water droplets while passing through the cloud. Supercooled water in clouds enables the Bergeron process, where raindrops start as ice crystals. Thin sheets of clouds are conducive to raindrop formation via the collision-coalescence process. For temperatures below 0°C, air that is saturated with water is not saturated with ice. Submit Now, you will use rainfall rates calculated from reflectivities to determine total rainfall. Part C - Calculating rainfall amounts People look at weather radar maps regularly to visualize current and recent weather patterns. These weather radar maps provides information on the intensity of precipitation in addition to the total amount of precipitation that falls over a given time period. The heavier the rainfall, the more reflective it is. This reflectivity can be used to calculate the rate of rainfall. The table provided below displays data that illustrates the relationship between radar reflectivity values and rainfall rates. Use this information to calculate the amount of rainfall for the radar values and rainfall durations provided. The calculations you will perform involve only simple algebra, like multiplication and addition. Drag the appropriate labels to their respective targets. Note that not all labels will be used. View Available Hint(s) Reset Help 12 inches 16 inches 0.6 inches 13.75 inches 3.25 inches 4.5 inches A reflectivity value of 47 dBZ for 2 hours. Conversion of radar reflectivity to rainfall rate Radar Rainfall Ratel Reflectivity (dBZ) (inches/hr) 65 16+ 60 8.0 55 4.0 52 2.5 A reflectivity value of 30 dBZ for 6 hours. A reflectivity value of 55 dBZ for 4 hours, A reflectivity value of 52 dBZ for 5 y hours. 47 1.3 A reflectivity value of 41 dBZ for 24 hours. 41 0.5 36 0.3 30 0.1 20 trace
Answer:
c
Explanation:
Clouds are categorized into three basic types: cirrus, cumulus, and stratus. Cirrus clouds are found at the highest altitudes and are thin, white, and feathery.
What are the types of Clouds ?Cumulus clouds have a cauliflower appearance and are comprised of individual globular cloud masses. Stratus clouds are characterized by sheets or layers that cover most or all of the sky.
Raindrops are formed through two main processes: the Bergeron process and the collision-coalescence process. The Bergeron process occurs at subfreezing temperatures, where ice crystals grow from supercooled water droplets.
As ice crystals form, water droplets evaporate to replenish the water vapor used in forming ice crystals. These ice crystals can grow large enough to fall to the ground, melting to form raindrops as they reach higher temperatures during descent.
The collision-coalescence process occurs when larger water droplets collide and join with other water droplets, eventually forming raindrops that are large and heavy enough to fall to the ground. Rainfall rates can be measured using reflectivity, where a higher rate of rainfall reflects more light than lower rainfall rates.
To calculate the amount of rainfall for a given reflectivity value and rainfall duration, we can use the table that displays the relationship between radar reflectivity values and rainfall rates.
By converting the reflectivity values to rainfall rates using the table and multiplying by the duration of rainfall, we can determine the total amount of rainfall. These calculations involve simple algebraic operations, such as multiplication and addition.
Regular monitoring of weather radar maps can provide information on the intensity of precipitation and the total amount of rainfall over a given time period.
Learn more about Clouds here
https://brainly.com/question/29976956
#SPJ2
What river forms part of the French Germany border?
what is the main purpose of the geologic time scale?
Answer:
relates stratigraphy (layers of rock) to periods of time.
The time scale is used by geologists palaeontologists and many other scientists to date certain historical events on Earth.
