Answer:
D. Hydrogen
Explanation:
The sun is a big ball of gas and plasma. Most of the gas — 91 percent — is hydrogen.
Answer:
D. Hydrogen
Explanation:
Hydrogen makes up most of the Sun. It is nearly 91 percent.
An electric device, which heats water by immersing a resistance wire in the water, generates 20 cal of heat
per second when an electric potential difference of 6 V is placed across its leads. What is the resistance in Ω
of the heater wire? (Note: 1 cal = 4.186 J)
Select one:
a. 0.86
b. 0.17
c. 0.29
d. 0.43
Answer:
1 cal/s =4.184w
p=50 cal/s =2093w
v=12v
P = V*I
I =P/V
I = 17.43 A
P =1²*R
R = P/I²
R = 0.68Calculating Acceleration
Initial
velocity
Time to travel
0.25 m
Final
velocity
Acceleration
Time to travel
0.50 m
# of
washers
11
(m/s)
V2
(m/s)
ti
(s)
t₂
(s)
a = (v2 - v4)/(t2-tı)
(m/s)
1
0.11
0.28
2.23
3.13
0.19
2
0.13
0.36
1.92
2.61
The acceleration of the car with two washers added to the string would be
I can not even read this question.
What are you trying to even say?
The acceleration of the car with two (2) washers added is equal to 0.33 [tex]m/s^2[/tex].
Given the following data:
Initial velocity = 0.13 m/s.Final velocity = 0.36 m/s.Initial time = 1.92 seconds.Final time = 2.61 seconds.What is an acceleration?An acceleration can be defined as the rate of change of velocity of an object with respect to time and it is measured in meter per seconds square.
How to calculate average acceleration.In Science, the average acceleration of an object is calculated by subtracting its initial velocity from the final velocity and dividing by the change in time for the given interval.
Mathematically, average acceleration is given by this formula:
[tex]a = \frac{V\;-\;U}{t_f-t_i}[/tex]
Where:
V is the final velocity.U is the initial velocity.[tex]t_i[/tex]initial time measured in seconds.[tex]t_f[/tex] final time measured in seconds.Substituting the given parameters into the formula, we have;
[tex]a = \frac{0.36\;-\;0.13}{2.61\;-\;1.92}\\\\a=\frac{0.23}{0.69}[/tex]
a = 0.33 [tex]m/s^2[/tex]
Read more on acceleration here: brainly.com/question/24728358
Lighting is the movement of?
Explanation:
Movement:refers to the changing in the lights whether it be a change in intensity, color or direction of origin.
From the top of the leaning tower of Pisa, a steel ball is thrown vertically downwards with a speed of 3.00 m/s. if the height of the tower is 200 m, how long will it take for the ball to hit the ground? Ignore air resistance.
Answer:
66,7 seconds
Explanation:
the formula for height/distance is : S=v.t
If you exert a force of 5 N into a nutcracker, and it outputs a force of 20 N, what is the mechanical advantage of the nutcracker. Show formula PLSSS HELPPPP!!! i'll make you brainliest
Answer: 4
Explanation:
MA = output force / input force
MA = 20 / 5
MA = 4
Hope this helps. Please mark brainliest.
PLEASE HELP ME WITH THIS ONE QUESTION
The half-life of Barium-139 is 4.96 x 10^3 seconds. A sample contains 3.21 x 10^17 nuclei. What is the decay constant for this decay?
A) 1.67 x 10^-4 s^-1
B) 5.43 x 10^-4 s^-1
C) 1.40 x 10^-4 s^-1
D) 2.22 x 10^-4 s^-1
OPTION C is the correct answer.
please help very easy 5th grade work giving brainliest
Answer:
the answer is option B because opposit sides of the magnets attract each other
Radiation exerts pressure on surfaces on which it lalls (radintion pressure). Will this pressure be greater on a shiny surface or a dark surface
Answer:
Shiny surface.
Explanation:
We know that radiation pressure is the pressure over a surface exposed to electromagnetic radiation.
Where if the radiation is absorbed by the material (like in the case of a dark surface), the pressure is the energy density flux divided by the speed of light, while if the radiation is totally reflected (idealized case, but we can suppose that this happens for a shiny surface) the pressure is twice pressure for the absorbed case.
This is a simplification for the radiation pressure but is enough to conclude that the radiation pressure is always greater on reflective surfaces, then for this case, the pressure will be greater on a shiny surface than in a dark surface,
The momentum of a falling rock is found to be 200 kg m/s. What is the mass of the rock if it falls with a velocity of 5.0 m/s
Answer:
[tex]\boxed {\boxed {\sf 40 \ kilograms}}[/tex]
Explanation:
Momentum is the product of velocity and mass. The formula is:
[tex]p=m*v[/tex]
We know the rock is falling. Its momentum is 200 kilograms meters per second and its velocity is 5 meters per second. Substitute the values into the formula.
[tex]200 \ kg \ m/s = m * 5.0 \ m/s[/tex]
We are solving for m, the mass. We must isolate the variable. It is being multiplied by 5 meters per second. The inverse of multiplication is division, so we divided both sides by 5.0 m/s.
[tex]\frac{200 \ kg \ m/s}{5.0 \ m/s}=\frac{ m* 5.0 \ m/s }{5.0 \ m/s}[/tex]
[tex]\frac{200 \ kg \ m/s}{5.0 \ m/s}=m[/tex]
The units of meters per second (m/s) cancel.
[tex]\frac{200 \ kg}{5.0 } =m[/tex]
[tex]40 \ kg = m[/tex]
The falling rock has a mass of 40 kilograms.
Trong máy phát điện xoay chiều ba pha khi tổng điện áp tức thời của cuộn 1,2 là e1+e2=120V thì điện áp tức thời của cuộn 3 là
Answer:
I just noticd i dont speak this launguage
Explanation:
A 3.25-gram bullet traveling at 345 ms-1 strikes and enters a 2.50-kg crate. The crate slides 0.75 m along a wood floor until it comes to rest.
Required:
a. What is the coefficient of dynamic friction between crate and the floor?
b. What is the average force applied by the crate on the bullet during collision if the bullet penetrates the 1.10cm into the crate?
Answer:
a) μ = 0.0136, b) F = 22.8 N
Explanation:
This exercise must be solved in parts. Let's start by using conservation of moment.
a) We define a system formed by the downward and the box, therefore the forces during the collision are internal and the momentum is conserved
initial instant. Before the crash
p₀ = m v₀
final instant. After inelastic shock
p_f = (m + M) v
the moment is preserved
p₀ = p_f
m v₀ = (m + M) v
v = [tex]\frac{m}{m + M} \ v_o[/tex]
We look for the speed of the block with the bullet inside
v = [tex]\frac{0.00325}{0.00325 + 2.50 } \ 345[/tex]
v = 0.448 m / s
Now we use the relationship between work and kinetic energy for the block with the bullet
in this journey the force that acts is the friction
W = ΔK
W = ½ (m + M) [tex]v_f^2[/tex] - ½ (m + M) v₀²
the final speed of the block is zero
the work between the friction force and the displacement is negative, because the friction always opposes the displacement
W = - fr x
we substitute
- fr x = 0 - ½ (m + M) vo²
fr = ½ (m + M) v₀² / x
the friction force is
fr = μ N
μ = fr / N
equilibrium condition
N - W = 0
N = W
N = (m + M) g
we substitute
μ = ½ v₀² / x g
we calculate
μ = ½ 0.448 ^ 2 / 0.75 9.8
μ = 0.0136
b) Let's use the relationship between work and the variation of the kinetic energy of the block
W = ΔK
initial block velocity is zero vo = 0
F x₁ = ½ M v² - 0
F = [tex]\frac{1}{2} M \frac{x}{y} \frac{v^2}{x1}[/tex]
F = ½ 2.50 0.448² / 0.0110
F = 22.8 N
The viscid silk produced by the European garden spider (Araneus diadematus) has a resilience of 0.35. If 10.0 J of work are done on the silk to stretch it out, how many Joules of work are released as thermal energy as it relaxes?
Answer: The energy released as thermal energy is 6.5 J
Explanation:
Energy stored by the spider when it relaxes is given by:
[tex]E_o=\text{Resilience}\times \text{Work}[/tex]
We are given:
Resilience = 0.35
Work done = 10.0 J
Putting values in above equation, we get:
[tex]E_o=0.35\times 10\\\\E_o=3.5J[/tex]
Energy released at thermal energy is the difference between the work done and the energy it takes to relaxes, which is given by the equation:
[tex]E_T=\text{Work done}-E_o[/tex]
Putting values in above equation, we get:
[tex]E_T=(10-3.5)=6.5J[/tex]
Hence, the energy released as thermal energy is 6.5 J
The energy released as thermal energy when 10 J of work is done to stretch silk will be 6.5 J
What is thermal energy?Thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat is the flow of thermal energy.
Energy stored by the spider when it relaxes is given by:
[tex]\rm E_o=Resilience \ \times Work[/tex]
We are given:
Resilience = 0.35
Work done = 10.0 J
Putting values in above equation, we get:
[tex]\rm E_o=0.35\times 10[/tex]
[tex]E_o=3.5\ J[/tex]
Energy released at thermal energy is the difference between the work done and the energy it takes to relaxes, which is given by the equation:
[tex]E_T=\rm Work done -E_o[/tex]
Putting values in above equation, we get:
[tex]E_T=(10-3.5)=6.5\ J[/tex]
Hence, the energy released as thermal energy is 6.5 J
To know more about thermal energy follow
https://brainly.com/question/19666326
PLEASE HELP ME WITH THIS ONE QUESTION
The half-life of Barium-139 is 4.96 x 10^3 seconds. A sample contains 3.21 x 10^17 nuclei. How much of the sample is left after 1.98 x 10^4 seconds?
A) 8.03 x 10^16 nuclei
B) 4.01 x 10^16 nuclei
C) 2.02 x 10^16 nuclei
D) 1.61 x 10^17 nuclei
OPTION C is the correct answer.
The radioactive decay follows the first order kinetics. The number of atoms decaying at any time is proportional to the number of atoms present at that instant. The amount of sample left is 2.02 x 10¹⁶nuclei. The correct option is C.
What is half-life?The time required for the decay of one half of the amount of the species is defined as the half-life period of a radionuclide. The half-life period is a characteristic of a radionuclide. The half lives can vary from seconds to billions of years.
The isotope decay of an atom is given by the equation:
ln [A] = -kt + ln [A]₀
The rate constant, k is:
k = ln 2 / Half life
k = ln 2 / 4.96 x 10³
k = 1.40 × 10⁻⁴ s⁻¹
t = 1.98 x 10⁴
[A]₀ = 3.21 x 10¹⁷
ln [A] = -1.40 × 10⁻⁴ × 1.98 x 10⁴ + ln [3.21 x 10¹⁷] = 37.538
[A] = 2.02 x 10¹⁶ nuclei
Thus the correct option is C.
To know more about half-life, visit;
https://brainly.com/question/24710827
#SPJ3
A magnetic field of 0.276 T exists in the region enclosed by a solenoid that has 517 turns and a diameter of 10.5 cm. Within what period of time must the field be reduced to zero if the average magnitude of the induced emf within the coil during this time interval is to be 12.6 kV
Answer:
The period the field must be reduced to zero is 9.81 x 10⁻⁵ s
Explanation:
Given;
initial value of the magnetic field, B₁ = 0.276 T
number of turns of the solenoid, N = 517 turns
diameter of the solenoid, d = 10.5 cm = 0.105 m
induced emf, = 12.6 kV = 12,600 V
when the field becomes zero, then the final magnetic field value, B₂ = 0
The induced emf is given by Faraday's law;
[tex]emf = -\frac{NA\Delta B}{t} \\\\emf = -\frac{NA (B_2 -B_1)}{t} \\\\t = -\frac{NA (B_2 -B_1)}{emf}\\\\t = \frac{NA (B_1 -B_2)}{emf}\\\\where;\\\\t \ is \ the \ time \ when \ B = 0 \ \ (i.e\ B_2 = 0)\\\\A \ is \ the \ area \ of \ the \ coil\\\\A = \frac{\pi d^2}{4} = \frac{\pi (0.105)^2}{4} = 0.00866 \ m^2\\\\t= \frac{(517) \times (0.00866)\times (0.276 -0)}{12,600}\\\\t = 9.81 \times 10^{-5} \ s[/tex]
Therefore, the period the field must be reduced to zero is 9.81 x 10⁻⁵ s
The following 1H NMR absorptions were obtained on a spectrometer operating at 200 MHz and are given in Hz downfield from TMS. Convert the absorptions to δ units. a) 416 Hz = δ b) 1.97×103 Hz = δ c) 1.50×103 Hz = δ
Answer:
For (a): The chemical shift is [tex]2.08\delta[/tex]
For (b): The chemical shift is [tex]9.85\delta[/tex]
For (c): The chemical shift is [tex]7.5\delta[/tex]
Explanation:
To calculate the chemical shift, we use the equation:
[tex]\text{Chemical shift in ppm}=\frac{\text{Peak position (in Hz)}}{\text{Spectrometer frequency (in MHz)}}[/tex]
Given value of spectrometer frequency = 200 MHz
For (a):Given peak position = 416 Hz
Putting values in above equation, we get:
[tex]\text{Chemical shift in ppm}=\frac{416Hz}{200MHz}\\\\\text{Chemical shift in ppm}=2.08\delta[/tex]
For (b):Given peak position = [tex]1.97\times 10^3 Hz[/tex]
Putting values in above equation, we get:
[tex]\text{Chemical shift in ppm}=\frac{1.97\times 10^3Hz}{200MHz}\\\\\text{Chemical shift in ppm}=9.85\delta[/tex]
For (c):Given peak position = [tex]1.50\times 10^3 Hz[/tex]
Putting values in above equation, we get:
[tex]\text{Chemical shift in ppm}=\frac{1.50\times 10^3Hz}{200MHz}\\\\\text{Chemical shift in ppm}=7.5\delta[/tex]
A laser emits a single 3.0-ms pulse of light that has a frequency of 2.83E11 Hz and a total power of 65000 W. How many photons are in the pulse? Please provide all equations and work.
6.0E23
1.0E24
2.4E25
3.6E25
4.8E26
Answer:
The number of photons in the pulse is 1.04 x 10²⁴
Explanation:
Given;
frequency of the emitted photons, f = 2.83 x 10¹¹ Hz
duration of the incident light, t = 3 ms = 3 x 10⁻³ s
power of the incident light, P = 65,000 W
The energy of each photon emitted is calculated as;
E = hf
where;
h is Planck's constant, = 6.626 x 10⁻³⁴ Js
E = 6.626 x 10⁻³⁴ x 2.83 x 10¹¹
E = 1.875 x 10⁻²² J
let the number of photons in the pulse = n
n(E)= Power x time
[tex]n = \frac{Pt}{E} \\\\n = \frac{65,000 \times 3\times 10^{-3}}{1.875 \times 10^{-22}} \\\\n = 1.04 \times 10^{24} \ photons[/tex]
how do you use the coefficient to calculate the number of atoms in each molecule?
Answer:
To find out the number of atoms: MULTIPLY all the SUBSCRIPTS in the molecule by the COEFFICIENT. (This will give you the number of atoms of each element.)
Explanation:
Assume that the energy lost was entirely due to friction and that the total length of the PVC pipe is 1 meter. Use this length to compute the average force of friction (for this calculation, you may neglect uncertainties).
The question is incomplete. The complete question is :
Assume that the energy lost was entirely due to friction and that the total length of the PVC pipe is 1 meter. Use this length to compute the average force of friction (for this calculation, you may neglect uncertainties).
Mass of the ball : 16.3 g
Predicted range : 0.3503 m
Actual range : 1.09 m
Solution :
Given that :
The predicted range is 0.3503 m
Time of the fall is :
[tex]$t=\sqrt{\frac{2H}{g}}$[/tex]
[tex]v_1t= 0.35[/tex] ...........(i)
[tex]v_0t= 1.09[/tex] ...........(ii)
Dividing the equation (ii) by (i)
[tex]$\frac{v_0t}{v_1t}=\frac{1.09}{035} = 3.11$[/tex]
∴ [tex]v_0=3.11 \ v_1[/tex]
Now loss of energy = change in the kinetic energy
[tex]$W=\frac{1}{2} m [v_0^2-v_1^2]$[/tex]
[tex]$W=\frac{1}{2} \times (16.3 \times 10^{-3}) \times [v_0^2-\left(\frac{v_0}{3.11}\right)^2]$[/tex]
[tex]$W=7.307\times 10^{-3} \ v_0^2$[/tex]
If f is average friction force, then
(f)(L) = W
(f) (1) = [tex]$7.307\times 10^{-3} \ v_0^2$[/tex]
(f) = [tex]$7.307\times 10^{-3} \ v_0^2$[/tex]
The Average force of friction is ( F ) = 7.307 * 10⁻³ v₀²
Given data:
Predicted range ( v₁t ) = 0.3503 m
Actual range ( v₀t ) = 1.09 m
mass = 16.3 g
First step : Determine the value of V₀
[tex]t = \sqrt{\frac{2H}{g} }[/tex] , v₁t = 0.3503 , ( v₀t ) = 1.09 m
To obtain the value of V₀
Divide ( v₀t ) by ( v₁t ) = 1.09 / 0.3503 = 3.11 v₁
∴ V₀ = 3.11 v₁
Next step : Determine the average force of friction ( f )
given that loss of energy results in a change in kinetic energy
W = [tex]\frac{1}{2} m ( vo^{2} - v1^{2} )[/tex]
= 1/2 * 16.3 * 10⁻³ * [ v₀² - [tex](\frac{v_{0} }{3.11} )^{2}[/tex] ]
∴ W = 7.307 * 10⁻³ v₀²
Average force of friction = W / Actual length
= 7.307 * 10⁻³ v₀² / 1
∴ Average force of friction ( F ) = 7.307 * 10⁻³ v₀²
Hence we can conclude that the average force of friction is 7.307 * 10⁻³ v₀²
Learn more about average force of friction : https://brainly.com/question/16207943
Your question has some missing data below are the missing data related to your question
Mass of the ball : 16.3 g
Predicted range : 0.3503 m
Actual range : 1.09 m
What recommendations would you give to the global government to help Decrease the global effects of human impact on the environment mystery recommendations and how they will positively impact our planet
Answer:
We can help to keep it magnificent for ourselves, our children and grandchildren, and other living things besides us.
Explanation:
5 ways our governments can confront climate change
PROTECT AND RESTORE KEY ECOSYSTEMS
SUPPORT SMALL AGRICULTURAL PRODUCERS
PROMOTE GREEN ENERGY
COMBAT SHORT-LIVED CLIMATE POLLUTANTS
BET ON ADAPTATION, NOT JUST MITIGATION
Consider a swimmer that swims a complete round-trip lap of a 50 m long pool in 100 seconds. What is the swimmers average speed and average velocity?
Answer:
The average speed is 1 m/s
The average velocity is 0
Explanation:
Given;
length of the pool, L = 50 m
time taken for the motion, t = 100 s
The total distance = 50 m + 50 m
The total distance = 100 m
The average speed = total distance / total time
= 100 / 100
= 1 m/s
The average velocity = change in displacement / change in time
change in displacement = 50 m - 50 m = 0
The average velocity = 0 / 100
The average velocity = 0
The power in an electrical circuit is given by the equation P= RR, where /is the current flowing through the circuit and Ris the resistance of the circuit. What is the current in a circuit that has a resistance of 100 ohms and a power of 15 watts?
[pleas ee helpppp)
I= 0.39 A
OPTION B is the correct answer.
Which type of energy is stored in a battery?
A. Nuclear energy
B. Electromagnetic energy
C. Chemical energy
D. Electrical energy
SUBMI
Answer:
c
Explanation:
in food and batteries chemical energy is stored :) hope this helped
A 5 kg box drops a distance of 10 m to the ground. If 70% of the initial potential energy goes into increasing the internal energy of the box, determine the magnitude of the increase.
Answer:
Explanation:
From the given information:
The initial PE [tex](PE)_i[/tex] = m×g×h
= 5 kg × 9.81 m/s² × 10 m
= 490.5 J
The change in Potential energy P.E of the box is:
ΔP.E = [tex]P.E_f -P.E_i[/tex]
ΔP.E = 0 - [tex](PE)_i[/tex]
ΔP.E = [tex]-P.E_i[/tex]
If we take a look at conservation of total energy for determining the change in the internal energy of the box;
[tex]\Delta P.E + \Delta K.E + \Delta U = 0[/tex]
[tex]\Delta U = -\Delta P.E - \Delta K.E[/tex]
this can be re-written as:
[tex]\Delta U =- (-\Delta P.E_i) - \Delta K.E[/tex]
Here, K.E = 0
Also, 70% goes into raising the internal energy for the box;
Thus,
[tex]\Delta U =(70\%) \Delta P.E_i-0[/tex]
[tex]\Delta U =(0.70) (490.5)[/tex]
ΔU = 343.35 J
Thus, the magnitude of the increase is = 343.35 J
FROM THE _____ WHOLE WATER CYCLE STARTS ALL OVER AGAIN
From the water whole water cycle starts again.
Most possibly water should be the answer.Space debris left from old satellites and their launchers is becoming a hazard to other satellites. (a) Calculate the speed in m/s of a satellite in an orbit 980 km above the Earth's surface.
Answer:
564
Explanation:
What happens in the gray zone between solid and liquid?-,-
Calculate the Combined resistance of the Circuit voltage across each resistor Current Passing through each resistor of 6,8,12ohms
Answer:
Sorry I don't know the answer
2. The given graph shows that the object is
(a) in non-uniform motion
(b) in uniform motion
(c) at rest
(d) in an oscillatory motion.
distance
time
Answer:
(c) at rest
Explanation:
Given
See attachment for the distance time graph
Required
What does the graph illustrate?
From the graph, we can see that the line of distance is a horizontal line.
This suggests that a time increases, the distance remains unchanged
When distance remains unchanged over time, then it means the object is at rest.
Hence, (c) is correct
g Is a nucleus that absorbs at 4.13 δ more shielded or less shielded than a nucleus that absorbs at 11.45 δ? _________ Does the nucleus that absorbs at 4.13 δ require a stronger applied field or a weaker applied field to come into resonance than the nucleus that absorbs at 11.45 δ?
Answer: A nucleus that absorbs at [tex]11.45\delta[/tex] is less shielded and a nucleus that absorbs at [tex]4.13\delta[/tex] will require a stronger applied field
Explanation:
While interpreting the data in NMR, the positions of signals are studied.
The nucleus/ protons having a higher value of [tex]\delta[/tex] are said to be less shielded. They are said to be upfield.
The nucleus/protons having a lower value of [tex]\delta[/tex] are said to be more shielded. They are said to be downfield.
So, a nucleus that absorbs at [tex]11.45\delta[/tex] is less shielded by the nucleus that absorbs at [tex]4.13\delta[/tex]
Also, the less shielded nucleus/protons will require a weak applied field to come into resonance than the more shielded nucleus/protons
So, a nucleus that absorbs at [tex]4.13\delta[/tex] will require a stronger applied field to come into resonance than the nucleus that absorbs at [tex]11.45\delta[/tex]
An astronaut throws a wrench in interstellar space. How much force is required to keep the wrench moving continuously with constant velocity?
A.
a force equal to its weight on Earth
B.
a force equal to zero
C.
a force equal to half of its weight on Earth
D.
a force equal to double its weight on Earth
Answer:
0 N
Explanation:
This is a trick question, the mass of the wrench would be 0 due to it being in space and has no gravitational pull to weight it down. And since acceleration is defined as the rate and change of velocity with no respect of time and the wrench is moving at a constant velocity, that means the velocity is 0. and since F = m*a it would be F = 0 * 0 = 0 N
