Answer:
2 PO₄³⁻(aq) + 3 Mg²⁺(aq) ⇒ Mg₃(PO₄)₂(s)
Explanation:
Let's consider the molecular equation that occurs when aqueous solutions of lithium phosphate and magnesium nitrate are mixed.
2 Li₃PO₄(aq) + 3 Mg(NO₃)₂(aq) ⇒ 6 LiNO₃(aq) + Mg₃(PO₄)₂(s)
The complete ionic equation includes all the ions and insoluble species.
6 Li⁺(aq) + 2 PO₄³⁻(aq) + 3 Mg²⁺(aq) + 6 NO₃⁻(aq) ⇒ 6 Li⁺(aq) + 6 NO₃⁻(aq) + Mg₃(PO₄)₂(s)
The net ionic equation includes only the ions that participate in the reaction and insoluble species.
2 PO₄³⁻(aq) + 3 Mg²⁺(aq) ⇒ Mg₃(PO₄)₂(s)
Help plz:))) I’ll mark u brainliest ASAP 10 points
11.
A sample of TNT, C-H5N306, has 7.30 1021 nitrogen atoms. Determine the numbers of
hydrogen atoms in this sample of TNT.
021
Answer:
1.22 × 10^22 H atoms
Explanation:
From this question, TNT has the chemical formula: C-H5N306. The number of nitrogen atoms in the TNT substance is said to be 7.30 × 10^21 atoms.
The number of hydrogen atoms in the same TNT substance can be got using mole ratio. Based on the chemical formula, the mole ratio of hydrogen to nitrogen is 5:3 i.e. H5N3.
This means that;
Number of atoms of hydrogen = 5/3 of the number of atoms of nitrogen.
Hence, number of H atoms = 5/3 × 7.30 × 10^21
number of H atoms = (7.30 × 5/3) × 10^21
number of H atoms = (36.5/3) × 10^21
number of H atoms = 12.1666 × 10^21
number of H atoms = 1.2166 × 10^22 atoms.
Approximately, number of H atoms in TNT is 1.22 × 10^22 atoms.
what is Brownian motion
Answer: the erratic random movement of microscopic particles in a fluid, as a result of continuous bombardment from molecules of the surrounding medium. Brownian motion, or pedesis, is the random motion of particles suspended in a medium. This pattern of motion typically consists of random fluctuations in a particle's position inside a fluid sub-domain, followed by a relocation to another sub-domain. Brownian motion, also called Brownian movement, any of various physical phenomena in which some quantity is constantly undergoing small, random fluctuations. It was named for the Scottish botanist Robert Brown, the first to study such fluctuations (1827).
Hope this helps...... Stay safe and have a Merry Christmas!!!!!!!!! :D
Explanation:
Answer:
to and fro motion is called brownian motion
How many elements are in NaC2H302?
What else is produced when sodium carbonate decomposes?
Na2CO3 → Na2O + _________
Answer:
CO2
Explanation:
Why is cellular respiration important?
A or B?
A. It changes energy in glucose into energy that can be used.
B. It changes radiant energy into chemical energy for all living things.
Write the balanced chemical equation between H2SO4 and KOH in aqueous solution. This is called a neutralization reaction and will produce whater and potassium sulfate. Phases are optional.
0.650 L of 0.430 M H2SO4 is mixed with 0.600 L of 0.240 M KOH. What concentration of sulfuric acid remains after neutralization?
Answer:
0.166M
Explanation:
In a neutralization, the acid, H₂SO₄, reacts with a base, KOH, to produce a salt, K₂SO₄ and water. The reaction is:
H₂SO₄ + 2KOH → K₂SO₄ + 2H₂O
To solve this problem, we need to determine moles of H2SO4 and moles of KOH that reacts to find the moles of sulfuric acid that remains after the reaction:
Moles H2SO4:
0.650L * (0.430mol /L) = 0.2795moles H2SO4
Moles KOH:
0.600L * (0.240mol / L) = 0.144 moles KOH
Moles of sulfuric acid that reacts with 0.144 moles of KOH are:
0.144 moles KOH * (1mol H2SO4 / 2 mol KOH) = 0.072 moles of H2SO4 react.
And remain:
0.2795moles H2SO4 - 0.072moles H2SO4 = 0.2075 moles of H2SO4 reamains.
In 0.650L + 0.600L = 1.25L:
Molar concentration of sulfuric acid:
0.2075 moles of H2SO4 / 1.25L =
0.166MHow much more pressure does a 250 lb person exert on the ground than a 120 lb person if they are both standing on one foot with area 16 in2?
Answer:
57.124.18 Pascals
Explanation:
The pressure that each person exerts on the ground is given by:
Pressure = force/area
The force that each person exert is given by:
Force = mass (kg) x acceleration due to gravity (10 m/s2)
1 lb = 0.4536 kg, hence;
250 lb person = 113.398 kg
120 lb person = 54.431 kg
Force exerted by the 250 lb person = 113.398 x 10 = 1133.98 kg/m2
Force exerted by 120 lb person = 54.431 x 10 = 544.31 kg/m2
16 inch2 = 0.0103226 m2
Pressure exterted by 250 lb person = 1133.98/0.0103226
= 109,854.11 pascals
Pressure exerted by 120 lb person = 544.31/0.0103226
= 52,729.93 Pascals
Difference in pressure = 109,854.11 - 52,729.93
= 57,124.18 Pascals
Hence, a 250 lb person will exert 57.124.18 Pascals pressure more than a person of 120 lb on a foot with a 16 inch2 area.
What is the product of the reaction?
Please answer with the correct answer! Thanks.
Answer:
compound
Explanation:
it is calcium oxide, also known as quicklime
Determine the number of hydrogen atoms in an alkyne with one carbon–carbon triple bond and 4 carbon atoms.
number of hydrogen atoms: ?
Answer:
There are 6 hydrogen atoms.
Explanation:
The formula for an alkyne that has only one triple bond is as follows:
CₙH₂₍ₙ₎₋₂Where n is any natural number greater than 2.
For this problem, n=4. This would mean the formula is:
C₄H₂₍₄₎₋₂Thus
C₄H₈₋₂C₄H₆Thus the answer is 6, there are 6 hydrogen atoms.
7. A. How many moles of Calcium hydroxide (CaOH2) are needed to completely react with 14.5 mol of Phosphoric acid (H3PO4)?
2 H3PO4 + 3 Ca(OH)2 → 6 H(OH) + Ca3(PO4)2
a. How many moles of water (HOH) will be produced?
b. How many moles of Calcium Phosphate (CaOH2) will be produced?
Answer:
moles of calcium hydroxide= 21.75 mol
a) 43.5 mol
b) 7.25 mol
Explanation:
Please see the attached picture for the full solution.
What happens when a wire passes through a magnetic field?
Answer:
If a coil of wire is placed in a changing magnetic field, a current will be induced in the wire. This current flows because something is producing an electric field that forces the charges around the wire. (It cannot be the magnetic force since the charges are not initially moving).
Explanation:
Answer:
When a conductor moves through a magnetic field, there will be a generated motional emf. This is one example of Faraday's Law and it arises from the magnetic force. The voltage generated in a length of wire, presuming that the entire length moves through a uniform field, is given below.
Explanation:
To be honest I just googled
Which best describes a difference between energy transformation in power plants and dams?
Answer:
Which best describes a difference between energy transformations in power plants and dams? Only power plants use fossil fuels to transform energy. Only dams use fission to generate thermal energy. ... Only dams use mechanical energy to produce electricity.
Explanation:
HOPE THIS HELP
PICK ME AS THE BRAINLIEST
Which of the following physical properties is NOT characteristic of a metal?
A.Malleable
B.Solid at room temperature
C.Dull in color
D.Good conductors
i need the answer for this
Answer:
need points
Explanation:
Which element has the same number of electrons in the outermost energy level at Lithium?
Answer:
Hydrogen, lithium, sodium, and potassium all have 1 valence electron ( an electron in the outermost energy level is a valence electron).
Describe a chemical property of iron that you observed.
Answer:
Iron can rust in damp conditions. Or, it can dissolve readily in dilute acids.
Explanation:
What is the total number of moles of oxygen atoms present in one mole of Mg(CIO3)2?
1. 5
2. 2
3. 3
4. 6
Answer:
Of oxygen would be 6 moles (4).
Explanation:
Since it is in a bracket you have to multiply 3 and tge 2 to get 6 oxygens.
What effect does the transfer of electrons have on the nuclei of the atoms involved?
Answer:
Chemical processes have no effect on the nucleus otherwise we would be in deep truble. GOOD LESSONS ♡
what coefficients used to balance chemical equation below? ___ Ag2O ----> ____ Ag + ___ O2
A 2,4,1
B 2,2,2
C 2,1,2
D 1,1,1
The coefficients used to balance the chemical equation given in the question are 2, 4, 1 (Option A)
What is a chemical equation?Chemical equations are representations of chemical reactions using symbols and formula of the reactants and products.
The reactants are located on the left side while the products are located on the right side.
Reactants —> Products
The balancing of chemical equations follows the law of conservation of matter which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.
How to balance the equationAg₂O —> Ag + O₂
There are 2 atoms of O on the right side 1 on the left. It can be balance by writing 2 before Ag₂O as shown below
2Ag₂O —> Ag + O₂
There are 4 atoms of Ag on the left side and 1 atom on the right side. It can be balance by writing 4 before Ag as shown below
2Ag₂O —> 4Ag + O₂
Now, the equation is balanced.
Thus, the coefficients are: 2, 4, 1
Learn more about chemical equation:
https://brainly.com/question/7181548
#SPJ2
Two waves were analyzed with some high-tech instrumentation. The first wave was found to have a wavelength of 3 x 10 m and the second wave had a wavelength of 3 x 10 m. Which wave would have a higher frequency? Explain
Explanation:
The first wave was found to have a wavelength of 3 x 10⁵ m and the second wave had a wavelength of 3 x 10⁴ m
We need to find which wave have a higher frequency.
The relation between frequency and wavelength is given by :
[tex]c=f\lambda[/tex]
Let f₁ and f₂ be the frequency of wave 1 and wave 2.
[tex]f_1=\dfrac{c}{\lambda_1}\\\\f_1=\dfrac{3\times 10^8}{3\times 10^5}\\\\=1000\ Hz[/tex]
And
[tex]f_2=\dfrac{c}{\lambda_2}\\\\f_2=\dfrac{3\times 10^8}{3\times 10^4}\\\\=10000\ Hz[/tex]
Hence, the wave having less wavelength will have higher frequency. The wave having wavelength 3 x 10⁴ m will have higher frequency.
How much water would need to be added to 1092 mL of a 54.7 M NaCl solution to make a 0.25 M solution?
Answer:
237.8L of water would need to be added.
Explanation:
The first thing to do is to identify that the equation to be used is M1V1=M2V2. (This equation works because it turns everything into moles which can then be compared).
Then figure out what information you have and what is being found. In this case:
M1 = 54.7 M
V1 = 1092 mL = 1.092 L
M2 = 0.25 M
V2 = unknown
Then solve the equation for whatever you are trying to find.
M1V1=M2V2
V2=M1V1/M2
Now you need to plug everything in.
V2=(54.7M*1.091L)/0.25M
V2=238.93L
That means that the solution needs a volume of 238.7L to gain a molarity of 0.25M but the starting solution already had a volume of 1.092 L meaning that to find the amount of solvent that needs to be added you just subtract the starting volume by the volume that the solution needs to be.
238.93L - 1.091L = 237.8L
Therefore the answer is that 237.8L needs to be added to a 1.092L 54.7M NaCl solution to make the concentration 0.25M.
I hope this helps. Let me know if anything is unclear.
37. Joshua wants to create something to put between a hot pot and a table, so he doesn't burn the table. He
knows he needs to choose a material that does not conduct heat well. Which material would be the best for
him to choose?
A Wood
B. Aluminum
C. Copper
D. Glass
Answer:
A.wood
Explanation:
It is a poor conductor of heat
which description of salt is a chemical property?
1. white cube crystals
2.odorless
3.product of mixing acids and bases
4. solid does not conduct electricity
Pls answer quickly
what is the empirical formula of vitamin A ( C=83.85, H=10.56, O=5.58)
The empirical formula of vitamin A : C₂₀H₃₀O
Further explanationThe empirical formula is the smallest comparison of atoms of compound =mole ratio of the components
The principle of determining empirical formula
Determine the mass ratio of the constituent elements of the compound. Determine the mole ratio by dividing the percentage by the atomic massmol ratio of C : H : O ⇒
[tex]\tt \dfrac{83.85}{12}\div \dfrac{10.56}{1}\div \dfrac{5.58}{16}\\\\6.9875\div 10.56\div 0.34875\rightarrow divide~by~smallest(0.34875)\\\\20\div 30\div 1[/tex]
.What does the changing the Aperture do when taking a photo? *
4.What effect can you get from using a slow shutter speed? *
5.What effect can you create by using a quick shutter speed?
Answer:
Slower shutter speeds like 1/60 second and slower cause a blurring effect. If you want to take a picture using a slow shutter speed, it is best to mount the camera on a tripod and use image stabilization (such as SteadyShot® technology) to reduce the chance of any unwanted camera movement.
The first big effect of it is motion blur. If your shutter speed is long, moving subjects in your photo will appear blurred along the direction of motion. ... If you use an especially fast shutter speed, you can eliminate motion even from fast-moving objects, like birds in flight, or cars driving past.
Explanation:
After food is consumed, chemical nutrients are absorbed into the blood. The blood then carries these nutrients to the body's cells where the nutrients enter mitochondria. Which reaction must occur next for the cell to carry on other activities?\
Answer:c. oxygen,light,and glucose combine to produce high energy molecules
Explanation:
For the presentation you will research and provide summaries for manned and unmanned explorations of your choice. The presentation should be about twelve slides in length. Your presentation will include:
Title
Introduction – gives an overview of the presentation
Time line of missions – must include 3 manned and 3 unmanned missions
Description of each of the missions in the timeline (1 mission per slide)
Name and date of mission
Purpose of missions
Results or findings from missions
Scientific advance – describe a scientific advancement that has led to an engineering improvement in space exploration
Engineering advance – describe an engineering advance that has led to greater knowledge about the solar system
Sources – list the websites and other sources you used
Remember to make a list (i.e., bullet points) on each slide. The slides should feature the highlights of the main idea. The bullet points should be short phrases (at most, one sentence) that highlight key points.
Answer:
Thank u ?
Explanation:
i don't get your question can you rephrase it pls
Answer:
Look this up on g00gle it will give it right to you! :)
Explanation:
what's element on the periodic table has the symbol w
Answer:
W is tungsten on the periodic table
Which of the following observations would be the expected indication that a reaction has taken place when a solution of cesium sulfate is mixed with strontium perchlorate.
Bubbling
Formation of percipitate
Formation of soluble salts
Formation of a gas
Answer:
Formation of precipitate
Formation of soluble salts
Explanation:
Let's consider the molecular equation that takes place when an aqueous solution of cesium sulfate is mixed with an aqueous solution strontium perchlorate.
Cs₂SO₄(aq) + Sr(ClO₄)₂(aq) ⇒ 2 CsClO₄(aq) + SrSO₄(s)
According to the solubility rules:
CsClO₄ is a soluble salt.SrSO₄ is an insoluble salt that precipitates as a solid.For a double displacement reaction to occur, at least one of the products must be insoluble or volatile.
Answer:
It's b) Formation of a precipitate
Explanation:
I took the quiz and got it right.
