Answer:
CL3. When dealing with CL or RL ratings, the lower the better.
Explanation:
I hope this helps!
Uhaul general mechanical questions 2021
Not a question. But the answers.
1) The PRIMARY purpose of the dual rear tires on this truck is to: (A) Reduce the chance of a blowout. (B) Withstand a heavier load and add greater stability. (C) Add more weight to the rear of the truck.
B
2) Which of these tools should be used on a Phillips-head screw?
B
3) Which arrow points to the alternator?
C
4) With the truck backing up and the front tires turned as shown, which way will the rear of the truck swing?
A
5) Above are four tools. Three of the tools have a similar function while one is different. Which tool performs the most different function of the four tools?
D
6) Which scaffolding above could probably hold more weight?
B
7) Which refrigerator will be easier to roll over uneven ground?
A
8) Assuming the pick-up trucks, trailers and road conditions are exactly the same, which vehicle will take a longer distance to stop?
B
9) What is the proper battery cable connection when jumping two automotive batteries? (A) Negative to Negative / Positive to Positive (B) Negative to Positive / Negative to Positive (C) It doesn't matter on 12-volt automotive batteries
A
10) Which of these filters is associated with airflow?
A
11) If a box of clothes weighing 10 lbs (4.5 kg) and a box of books weighing 10 lbs (4.5 kg) were placed on a scale, what is most likely to occur?
C
12) Which area will get the smoothest ride?
B
13) Which trailer has more downward pressure where it attaches to the car?
A
14) Which direction will wheel three rotate?
B
15) The tire above has a recommended tire pressure of 35 PSI, however, its current pressure is only 26 PSI. Which of the following could occur if driven on? (A) A tire blowout. (B) Unstable handling of the vehicle. (C) Both A & B.
C
16) Which is the proper position of the adjustable wrench for tightening a nut?
A
17) Which tire has more tread? (A) Image A (B) Image B (C) Cannot be determined
B
18) Which picture best illustrates the correct location for loading ONLY the washer in this trailer?
B
19) Which is the MOST LIKELY use for the following object? (A) Checking for a vacuum source. (B) Checking for the proper voltage at the battery. (C) Checking for electrical current traveling through a wire.
C
20) If this truck backs up with the front tires turned as shown, which way will the rear of the trailer swing?
B
21) Which illustration best demonstrates the safest ladder for this person to use?
A
22) Which method requires the least amount of effort to move the refrigerator?
A
23) With the side gears turning in the direction shown, in which direction will the top gear turn?
B
24) In order for the Hitch ball to be secured properly, what should be the last part assembled? (A) Nut (B) Shank (C) Cotter Pin
C
25) As the truck backs up, which way should the front tires be turned in order to make the trailer follow the road?
B
Moving or transportation tools, equipment and methods provides guidance
on the safe an efficient ways to move items.
The correct responses are;
1) (B); 2) B; 3) C; 4) A; 5) D; 6) B; 7) A; 8) B; 9) (A); 10) A; 11) C; 12) B; 13) A; 14) A; 15) B; 16) A; 17) B; 18) A; 19) (C); 20) B; 21) B; 22) A; 23) B; 24) (C); 25) B
Reasons:
1) The correct option is; (B) Withstand a heavier load and add greater stability
By sing two wheels on the rear of a truck, heavy loads can be hauled, and transported around corners, and bumpy roads, reducing the possibility of the load tipping the truck over, thereby keeping the truck stable.2) The correct option is; B
The Phillips-head screw is cross shaped, and required a cross shaped screwdriver, which is option B)3) The correct option is; C
The alternator converts mechanical rotational energy into electrical energy, and usually has a compact electrical coil and magnets within its enclosure. The alternator is option C4) The correct option is; A
The rear of a truck moves in the direction the front tires are turned5) The correct option is; D
Option A and B are pliers, while option B is a spanner, all of which are used to fasten and loosen bolts and nuts. Option D is a screwdriver used to fasten and loosen screws.6) The correct option is; B
The working platform on scaffold B has extra support from the diagonal braces.7) The correct option is; A
The large size tires in refrigerator A increases the contact surface with the road to prevent entering into small holes8) The correct option is; B
Due to the heavier load in the trailer of pick-up truck B, more force is required, to stop the truck according to Newton's Laws of motion, and therefore, a longer distance will be taken to stop by the truck, given similar conditions (magnitude) stopping force available9) The correct option is; (A)
Jumping two batteries to start an automotive with a dead battery requires a Negative to Negative / Positive to Positive connection, which is option (A)10) The correct option is; A
The air filter will have a open outer rim for the free passage of air.11) The correct option is; C
The scale measures the difference in weight, and the weight depends on the mass of the item. Given that the mass are equal, both weights would be equal, and therefore, the scale would be level.12) The correct option is; B
The smoothest ride is closest to the most weight of the vehicle, which is located in the front, therefore, the area that gets the smoothest ride is option B13) The correct option is; A
The downward pressure is given by the location of the load relative to the wheel on the trailer, that gives either a clockwise or downward moment of force when in position of option A or a counterclockwise or upward moment at B14) The correct option is; A
Gear connected by belt or chain move in the same direction, therefore, the direction of wheel 3 is option A15) The correct option is; B
A tire blowout will not occur because, the pressure is below the recommended pressure. However, the motion of the car will be unstable16) The correct option is; A
When tightening a nut with an adjustable wrench, the direction of turning the wrench is towards the movable jaw, therefore, the option A is correct17) The correct option is; B
The difference between the threads of the given tires is the depth of their grooves, therefore, the tire in option B has more thread.18) The correct option is; A
When loading items on a trailer, the majority of the load should be located in the front, therefore, the correct location for loading only the washer is illustrated by the picture A.19) The correct option is; (C)
The object has a lead, an insulated handle, and a electrical bulb that lights up when there is electricity, therefore, it is used for (C) Checking for electrical current travelling through a wire.20) The correct option is; B
The trailer swings in the opposite direction to the truck.21) The correct option is; B
The ladder in picture B is safer because it spreads more at the base22) The correct option is; A
Most of the weight of the refrigerator act on the wheel in picture A than in picture B23) The correct option is; B
The gear turns towards the screen on the left and away from the screen on the right, which is a direction from left to right.24) The correct option is; (C)
The cotter pin is assembled last to hold the bolt in place, and cannot be assembled before the other parts as it will restrict their movement25) The correct option is; B
The front tire should be turned in the opposite direction to the intended direction of the trailer.
Learn more here:
https://brainly.com/question/69628
Which two wireless technologies are used in IoT?
Answer:
If you like my answer you can put me in brainlist.
Explanation:
LPWANs. Low Power Wide Area Networks (LPWANs) are the recent development specifically designed for the requirements for IoT. ...
Cellular (4G and 5G) ...
Zigbee and Other Mesh Protocols. ...
Bluetooth and BLE. ...
Wi-Fi. ...
RFID.
Hope this is helpful to you.....
9. In a program with 25% loads, 10% stores, 11% branches, 2% jumps, 52% R-type. The standard CPI for each instruction type is 2 cycles loads, 2 cycles stores, 1 cycle branches, 2 cycles jumps, 1 cycle R-type. The branches have a misprediction penalty of an additional 2 cycles when it misses, which happens 30% of the time. Loads create a RAW hazard 20% of the time adding in an extra cycle to the execution time. What is the average CPI for this program on this processor
Answer:
2.6
Explanation:
Which of these lines of code will generate a random number between 1 and 50? A. input("1-50") B. print("1-50") C. import random D. num = random.randint(1,50)
Answer:
D. num = random.randint(1,50)
Explanation:
The option given above will assign a random integer in the range of 1 through 50 to the variable number is: "number = random.randint(1, 50)"
What is a random integer in programming?This is a random sequence of integers that may be used to imitate things like shuffling a deck of cards or creating distinct behaviors every time a program runs. The RND function in BASIC generates random numbers. This yields a value between 0 and 1.
Random number creation is a technique that generates a series of numbers or symbols that cannot be realistically anticipated better than by random chance, generally using a random number generator (RNG).
Therefore, The option given above will assign a random integer in the range of 1 through 50 to the variable number is: "number = random.randint(1, 50)"
Learn more about random integers:
brainly.com/question/15247918
#SPJ3
A color image uses 16bits to represent a pixel. What is the maximum number of different colors that can be represented?
Answer: A color image uses 16 bits to represent a pixel. What is the maximum number of different colors that can be represented? With 16 bits, we can represent up to 2^16 different colors. Assume six devices are arranged in a mesh topology.
Explanation:
The terms 16-bit picture, high color image, and 32K color image are all used to describe images that have 16 bits per pixel.
What is a pixel?The smallest addressable element in a raster image or the smallest point in an all points addressable display device is known as a pixel (abbreviated as px), pel, or picture element in digital imaging.
The smallest component in most digital display systems that can be changed by software are pixels.
Photos with 16 bits per pixel are referred to as 16-bit pictures, high color images, and 32K color images.
The number of distinct colors that can be represented by 16 bits, where there are 5 bits for each of the red, green, and blue values and the 16th bit can be the alpha bit, is around 32 thousand.
Thus, the maximum number of different colors that can be represented is 32 thousand.
For more details regarding pixel, visit:
https://brainly.com/question/15189307
#SPJ2
beth chooses fresh vegetables every time she does marketing. she pares and cuts right away these vegetable considering that they are fresh. the moment she serves the appetizer, she washes the plate and uses it without drying. what statement best describes the situation inside teh box
Answer:
spell correctly "teh=the
Explanation:
beth chooses fresh vegetables every time she does marketing. she pares and cuts right away these vegetable considering that they are fresh. the moment she serves the appetizer, she washes the plate and uses it without drying. what statement best describes the situation inside teh box
limitations of systems analysis and design
Answer:
Explanation:
Although System analysis offers an extensive range of benefits it might also have some disadvantages. One of the main disadvantages which is mostly overlooked is the risk of too much analysing which may be costly and time consuming. It is therefore part of the analyst's job to find the right balance.Động cơ đốt trong có mấy loại
động có xăng, động cơ diesel và động cơ gas còn gọi là động cơ chạy khí
Give an example (other than clothes) where the must-have feature could be APPEARANCE.
Answer:
Assuming you are talking about UI or something graphical on a computer screen we'll just say the must-have features (in terms of appearance) are:
The UI/Web/Graphical Designers basic knowledge of color theory so they don't end up putting #0000FF text on a #FF0000 backgroundA good font (if there is text) that looks nice with the colors usedA proper aesthetic to the software (I.E. Spotify's green on black modern/techno aesthetic)The design of mobile phones is an example of a must-have feature that is in appearance.
What are the features of appearance?Features of appearance mean the visual qualities of an object or product.
Such as:
- Color
- Shape
- Texture
- Finish
- Branding
We have,
One example where the must-have feature could be appearance is in the mobile phones design
Many consumers prefer mobile phones that not only have the latest technology and features but also look sleek and stylish.
Companies invest heavily in the design of their mobile phones to make them visually appealing to consumers.
The appearance of the phone can often be a deciding factor in the purchasing decision, even if the phone has similar features to a competitor.
Thus,
The design of mobile phones is an example of a must-have feature that is in appearance.
Learn more about appearance here:
https://brainly.com/question/15851729
#SPJ2
what is multimedia software
Answer: A program that plays or records audio files or playing or recording video files. Audio of famous speeches is a multimedia software
Explanation:
Which wireless standard runs on both the 2.4 and 5 GHz frequencies?
Answer:
Approved in 2009, Wi-Fi 4 enables operation in both the 2.4 and 5 GHz frequencies, a game changer at the time. It was the first standard to use MIMO (Multiple In, Multiple Out) and offered better speed, 300 Mbps, better range, more resistance to interference and backward compatibility with Wi-Fi 2 and
Hope this is helpful to you.......
Write a program that prompts the user to enter the month and year and displays the number of days in the month. For example, if the user entered month 2 and year 2000, the program should display that February 2000 has 29
Answer:
5
Explanation:
becauss it is impossible to actually di
What are different method of selecting items??
Answer:
Hold down the "Ctrl" key and the "Shift" key. Press the right arrow key to select the word to the right, or press the left arrow key to select the word to the left. Select one character at a time by holding down the "Shift" key and and using either arrow key (right or left).
Explanation:
follow= return follow
state two advantage of using the internet
Answer:
Seemless communication with other parts of the world
Being able to share files easily
Explanation:
Answer:
communicate with family.
Able to get information from the internet.
If ADD = 81, BAD = 49, and CAD = 64, then what is the value of ACA?
Answer:
its 72
Explanation:
i know it because i did it and thats how i know it
a simple C program to find the logarithm of any number in any base.....
Answer:
tera bur mast hai jwjvszvVbzNjz
Given the following code, what logic would you need to include to print all even values stored within the array:
int[] myArray = {1,2,38,4,54,6,7,8,9,10};
for (int i = 0; i < myArray.length; i++) {
//your code goes here
}
NOTE: Your response should be just the missing logic--not the entire problem set.
The missing logic whigh would allow all the even numbers stored within the array to be printed is if(myArray[i]%2 == 0)
Even numbers are divisible by 2, and hence, will leave no remainder when divided by 2. Using the modulo operator, each iterated value in the array should be checked if it has a remainder of 0, when divided by 2.Hence, if the remainder is 0, then the value is even and the value should be printed.
Learn more : https://brainly.com/question/17330574
three types of query
It is commonly accepted that there are three different types of search queries:
Navigational search queries.
Informational search queries.
Transactional search queries.
What allows an individual to avoid capital outlay?
paying cloud by the month
paying cloud by the year
paying cloud by the hour
paying cloud by the day
The daily payment for cloud services would be most reasonable. Hence option A is correct.
Capital Outlay refers to the expenditure or payment for the acquisition cost of capital assets.
In this case, the assets whose cost of purchase is being avoided by expenditure on cloud services is IT Server Hardware and Software which can be outsourced to companies that provide Cloud as a Service.
Cloud Services is the provision of Cloud computing services on a pay-per-use basis.
One of the advantages of this service is that it mostly consists of self-service on-demand. Hence, no need for the physical asset which usually is very costly.
Learn more about Capital Outlay in the link below:
https://brainly.com/question/832717
Encryption is an effective strategy to prevent which of the following?
O eavesdropping
O jamming
O destruction of data
O tapping
Write a program that prompt the user to enter a bank balance. The balance entered by the user is read into a variable named balance. The program then prompts the user to enter the amount to be deposited. The amount entered by the user is read into a variable named deposit. The program that calculates the new balance, which is the present balance plus the deposit. The program then displays the new balance.
Answer:
ertyuiopoijuhgfdsa hiyoufun tresdfghytrefgytredfg
Explanation:
look for the words
Does media contribute to the mental wellness of society?
Answer:
However, multiple studies have found a strong link between heavy social media and an increased risk for depression, anxiety, loneliness, self-harm, and even suicidal thoughts. Social media may promote negative experiences such as: Inadequacy about your life or appearance.
What is mean by SEO?
Answer:
SEO = Search Engine Optimization
Answer:
Search Engine Optimization
Explanation:
Is the process used to optimize a website's technical configuration, content relevance and link popularity so its pages can become easily findable, more relevant and popular towards user search queries, and as a consequence, search engines rank them better.
a) Viết chương trình tính tổng từ 20 – 50
b) Viết chương trình tính tổng từ a – b, với a, b nhập từ bàn phím. Yêu cầu: a
không phải thông báo lỗi.
cứu tôi 2 câu này sài lệnh lặp
Answer:
Program viet_chuong_trinh_tinh_tong;
Uses Crt;
Var i,s:integer;
Begin
Clrscr;
i:=20;
While (i>=20) and (i<=50) do
Begin
s:=s+i;
i:=i+2;
End;
Writeln(S);
Readln;
End.
Explanation:
Could someone write the code for this in java? I cannot use java.util random(but i can use scanner). also, i cannot use switch or case.
Program Rock.java contains a skeleton for the game Rock, Paper, Scissors. Add statements to the program as indicated by the comments so that the program asks the user to enter a play, generates a random play for the computer, compares them and announces the winner (and why). For example, one run of your program might look like this:
Enter your play: R, P, or S
r
Computer play is S
Rock crushes scissors, you win!
Note that the user should be able to enter either upper or lower case r, p, and s. Add a loop to make sure the user only enters an R, P, or S. The user's play is stored as a string to make it easy to convert whatever is entered to upper case. Use if statements to convert the randomly generated integer for the computer's play to a string.
public class Rock
{
public static void main(String[] args)
{
String personPlay; //User's play -- "R", "P", or "S"
String computerPlay; //Computer's play -- "R", "P", or "S"
int computerInt; //Randomly generated number used to determine
//computer's play
// Add the code for each action beneath the comment. // more than one line may be needed in some cases // Get player's play -- note that this is stored as a string
// Make player's play uppercase for ease of comparison
// Generate computer's play (0,1,2) – use (int) (Math.random() * 3) to
// generate a random play
// Translate computer's randomly generated play to string // using mutually exclusive conditional statements
// Print computer's play
// See who won. Use nested ifs instead of &&.
}
}
People hardly ever play Rock, Paper, Scissors one game at a time. They play matches that are best 2 out of 3, best 3 out of 5, etc. Change your program to prompt the user for the odd number of games they want to play and use a loop to make sure it is an odd number. Then, add a loop to your program to play the game multiple times. Keep track of who wins, and make sure the loop stops when either the computer or the user has accumulated enough wins. Ties do not count in either the game total or the win totals – so a best 2 out of 3 match requires 3 games to be played where someone wins 2 times.
Program Rock.java contains a skeleton for the game Rock, Paper, Scissors. Open it and save it to your directory.
Add statements to the program as indicated by the comments so that the program asks the user to enter a play,
generates a random play for the computer, compares them and announces the winner (and why). For example, one run
of your program might look like this:
$ java Rock
Enter your play: R, P, or S
r
Computer play is S
Rock crushes scissors, you win!
Note that the user should be able to enter either upper or lower case r, p, and s. The user's play is stored as a
string to make it easy to convert whatever is entered to upper case. Use a switch statement to convert the randomly
generated integer for the computer's play to a string.*/
// ****************************************************************
// Rock.java
//
// Play Rock, Paper, Scissors with the user
//
// ****************************************************************
import java.util.Scanner;
import java.util.Random;
public class Rock
{
public static void main(String[] args)
{
String personPlay; //User's play -- "R", "P", or "S"
String computerPlay; //Computer's play -- "R", "P", or "S"
int computerInt; //Randomly generated number used to determine
//computer's play
Scanner scan = new Scanner(System.in);
Random generator = new Random();
System.out.println ("Enter R for Rock, P for Paper, S for Scissors: "); //Get player's play -- note that this is stored as a string
personPlay = scan.next();
personPlay = personPlay.toUpperCase();
computerInt = generator.nextInt(3);
switch (computerInt)
{
case 0:
{
computerPlay = "R";
break;
}
case 1:
{
computerPlay = "P";
break;
}
case 2:
{
computerPlay = "S";
break;
}
default:
{
computerPlay = "will not happen";
}
}
System.out.println ("Computer plays: " + computerPlay);
if (personPlay.equals(computerPlay))
{
System.out.println("It's a tie!");
}
else if (personPlay.equals("R"))
{
if (computerPlay.equals("S"))
System.out.println("Rock crushes scissors. You win!!");
else if (computerPlay.equals("P"))
System.out.println ("Paper eats rock. You lose!!");
}
else if (personPlay.equals("P"))
{
if (computerPlay.equals("S"))
System.out.println ("Scissor cuts paper. You lose!!");
else if (computerPlay.equals("R"))
System.out.println ("Paper eats rock. You win!!");
}
else if (personPlay.equals("S"))
{
if (computerPlay.equals("P"))
System.out.println ("Scissor cuts paper. You win!!");
else if (computerPlay.equals("R"))
System.out.println ("Rock breaks scissors. You lose!!");
}
else
{
System.out.println ("Invalid user input.");
}
}
}
// Enter R for Rock, P for Paper, S for Scissors:
// P
// Computer plays: P
// It's a tie!
5. Power Trio
by CodeChum Admin
Multiplying two numbers is a piece of cake, but how about multiplying three of them, either being a negative of positive number? With programming and proper code, these tasks are easy to handle.
You're a programmer, right? Then code this one for me!
Input
A line containing three numbers (positive or negative, may have decimal places) separated by a space.
1.6·-2·-1
Output
A line containing a decimal/float with one decimal place.
3.2
Answer:
from decimal import *
li = list(map(Decimal,input().split()))
result = li[0]*li[1]*li[2]
print(abs(result))
Explanation:
The proper or programming code to handle that multiplies three numbers is as follows:
from decimal import *
value = list(map(Decimal,input().split()))
result = value[0]*value[1]*value[2]
print(abs(result))
Code explanation:The code is written in python.
From the decimal module we have to import *. The decimal module incorporates a notion of significant places so that 1.3*1.2 = 1.56The variable value is used to store the list of the decimal inputThe variable result multiplies the three numbers in the list Finally we print the absolute value of the result.learn more on python here: https://brainly.com/question/19175881
Your worksheet contains a price in cell A5 and many formulas refer to that price how would you refer to that price in the formula
Answer:
$A$5
Explanation:
The A$5 would allow the row part of the reference to stay in place but would allow the column to change.
What does '$' mean in Excel formula?
An absolute reference in Excel exists as a cell address with the dollar symbol ($) in the row or column coordinates, like $A$1. The dollar sign specifies the connection to a given cell so that it stays unchanged no matter where the formula moves.
The A$5 would permit the row position of the authority to remain in place but would permit the column to modify. The location of the $ before either the row or column or both exists what specifies what component stands frozen. Therefore, the correct answer is option b) $A$5.
Complete question:
Your worksheet contains a price in cell A5, and many formulas refer to that price. How would you refer to that price in the formulas?
a. A5
b. $A$5
c. $A5
d. A$5
To learn more about Excel formula
https://brainly.com/question/26276255
#SPJ2
A computer uses
to follow a set of instructions
Answer:
A set of instructions that directs a computer's hardware to perform a task is called a program, or software program.
Answer:
which is called a program
Explanation:
From her stack of photographs, Alice has to pick images that a photographer shot using the sports mode. Which images would she pick?
Answer:
1. horses
2. train/ metro
3. child
How do I get fix the code to make it input 3 values and get the correct output
-------------------------------------------------------------
12.20 LAB: Driving costs - functions
Driving is expensive. Write a program with a car's miles/gallon and gas dollars/gallon (both floats) as input, and output the gas cost for 10 miles, 50 miles, and 400 miles.
Output each floating-point value with two digits after the decimal point, which can be achieved as follows:
print('{:.2f}'.format(your_value))
Ex: If the input is:
20.0
3.1599
the output is:
1.58
7.90
63.20
Your program must define and call the following driving_cost() function. Given input parameters driven_miles, miles_per_gallon, and dollars_per_gallon, the function returns the dollar cost to drive those miles.
Ex: If the function is called with:
50 20.0 3.1599
the function returns:
7.89975
def driving_cost(driven_miles, miles_per_gallon, dollars_per_gallon)
Your program should call the function three times to determine the gas cost for 10 miles, 50 miles, and 400 miles.
---------------------------------------------------
I need help for this part
Ex: If the function is called with:
50 20.0 3.1599
how do I get it to input the three to get the output of 7.89975?
-------------------------------------
My code:
# Define your function here.
def driving_cost(driven_miles, miles_per_gallon, dollars_per_gallon):
return (driven_miles/miles_per_gallon) * dollars_per_gallon
if __name__ == '__main__':
# Type your code here.
# Miles per gallon from input
miles_per_gallon = float(input())
#Dollars per gallon from input
dollars_per_gallon = float(input())
# Display the results as output
print('{:.2f}'.format(driving_cost(10, miles_per_gallon,dollars_per_gallon)))
print('{:.2f}'.format(driving_cost(50, miles_per_gallon,dollars_per_gallon)))
print('{:.2f}'.format(driving_cost(400, miles_per_gallon,dollars_per_gallon)))
Answer:Change your logic to:
for (int i = 0; i < 4; i++) {
System.out.println("Please input a number between zero to 3");
// use input and don't advance the scanner every time
int input = sc.nextInt();
if (input == 0) {
System.out.println("You have selected " + right);
}
if (input == 1) {
System.out.println("You have selected " + left);
}
// so on and so forth
}
By using sc.nextInt() four times, you are looking for the next token of the input which isn't there. So fetch the input for each run of the for-loop and it will work as expected.
Explanation:
