Answer:
An heater, Oven, sun, and fireplaces
Chose which ever you want
Si tengo 56 gramos de amoniaco gaseoso (NH3) ¿Cuántos moles y moléculas (entidades elementales) podré obtener?
Answer: 56 grams of gaseous ammonia (NH3), has 3.28 moles and [tex]19.80 \times 10^{23}[/tex] molecules.
Explanation:
Given: mass of [tex]NH_3[/tex] = 56 g
Molar mass of [tex]NH_3[/tex] is 17.03 g/mol.
As moles of a substance are its mass divided by the molar mass. Therefore, moles of [tex]NH_3[/tex] are calculated as follows.
[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{56 g}{17.03 g/mol}\\= 3.28 mol[/tex]
According to the mole concept, 1 mole of every substance contains [tex]6.022 \times 10^{23}[/tex] molecules. Hence, number of molecules present in 3.28 moles of [tex]NH_3[/tex] are calculated as follows.
[tex]No. of molecules = no. of moles \times 6.022 \times 10^{23}\\= 3.28 mol \times 6.022 \times 10^{23}\\= 19.80 \times 10^{23}[/tex]
Therefore, we can conclude that 56 grams of gaseous ammonia (NH3), has 3.28 moles and [tex]19.80 \times 10^{23}[/tex] molecules.
10. An aqueous solution is made from 0.315 mol of Na,Cr2O7. If the volume of the
solution is .025 L, what is the molarity of the solution? (Answer with significant
digits. Example: 00.0)
Answer:
Its 12.6M
Explanation:
It came to the conclusion and got these answers
2.22
20.5
10
12.6
12.6 is the correct answer
where do you think water vapor in air comes from?
Which gland would most likely have an issue with maintaining the breakdown of food?
the thyroid
the thymus
the pancreas
the ovaries
Answer:
OKAY EVERYONE STOP SAYING PANCREAS THATS WRONG
Explanation:
It is actually thyroid
Select all the correct answers.
Which statements demonstrate scientific research bias?
Jennifer studied the most convenient sample instead of obtaining a sample that better represented the entire population.
Tyler's conclusion was supported by his data, but it did not agree with his hypothesis.
Manny was presented with several possible research topics, and he chose the one he found most interesting.
Ellie carried out the same experiment four times, and she obtained the same result every time.
Brad expected a certain result from his experiment, so he interpreted his data in a way consistent with that result.
Answer:
1. Jennifer
Jennifer tried to cut corners and exclude a chunk of people from the population, making her results biased.
2. Brad
Brad was just seeing what he wanted to see, instead of facing the results of his experiment, which makes him scientifically biased. It's known as 'cherry-picking' informally.
Explanation:
Why are the rest not biased?
1. Tyler
You don't need your results and conclusion to agree with your hypothesis. A hypothesis is just your guess, it's not absolute and doesn't demonstrate bias if it doesn't agree with your conclusion.
2. Manny
He simply chose a topic he was interested in. It would be a different story if he already had a topic, but only chose information that agreed with his hypothesis, neglecting other pieces of information.
3. Ellie
This demonstrates no bias. She carried out an experiment and, according to experimental data, received the same results every time. She did not purposefully alter them to make them what she wanted to see.
Answer:
1. Jennifer
Jennifer tried to cut corners and exclude a chunk of people from the population, making her results biased.
2. Brad
Brad was just seeing what he wanted to see, instead of facing the results of his experiment, which makes him scientifically biased. It's known as 'cherry-picking' informally.
Explanation:
Write the overall balanced equation for the reaction:
N2O4(g) + CO → NO(g) + CO2(g)+NO2(g)
Answer:
This reaction has infinite ways to be balanced
Explanation:
To balance this equation we can use the algebraic method:
N2O4(g) + CO → NO(g) + CO2(g)+NO2(g)
Where we write each molecule as a letter:
A + B → C + D + E
Then, we write the equations according the number of atoms of each molecule. That is:
Oxygen → 4A + B = C + 2D + 2E (1)
Nitrogen → 2A = C + E (2)
Carbon → B = D (3)
Then, we have to give 1 arbitral number for a letter. For example:
B = 1; D = 1
(1) 4A + 1 = C + 2 + 2E
4A = C + 2E + 1
2A = C + E (2) Twice (2):
4A = 2C + 2E
Subtracting (1) in (2)
C + 2E + 1 = 2C + 2E
C + 1 = 2C
1 = C
Si 1 = C:
4A + 1 = 1 + 2 + 2E
4A = 2 + 2E (1)
y:
2A = 1 + E (2)
Twice:
4A = 2 + 2E
As (1) and (2) are the same equation:
This reaction has infinite ways to be balancedFor example:
N2O4(g) + CO → NO(g) + CO2(g)+NO2(g)
Answer the above pic
i bet no one can solve this correctly with steps
Answer:
solution given:
log k=4-[tex] \frac{200}{t} [/tex]
so,
On comparison
∆S°/R = 4
∆ S° = 4R
mousam brother is correct
hope it helps you have a good day
If I had 3.50 x 10 24molecules of Cl2 gas, how many grams is this?
Answer:
412 g Cl₂
General Formulas and Concepts:
Atomic Structure
Reading a Periodic TableMolesAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:
Step 1: Define
[Given] 3.50 × 10²⁴ molecules Cl₂
[Solve] grams Cl₂
Step 2: Identify Conversions
Avogadro's Number
[PT] Molar Mass of Cl - 35.45 g/mol
Molar Mass of Cl₂ - 2(35.45) = 70.9 g/mol
Step 3: Convert
[DA] Set up: [tex]\displaystyle 3.50 \cdot 10^{24} \ molecules \ Cl_2(\frac{1 \ mol \ Cl_2}{6.022 \cdot 10^{23} \ molecules \ Cl_2})(\frac{70.9 \ g \ Cl_2}{1 \ mol \ Cl_2})[/tex][DA] Divide/Multiply [Cancel out units]: [tex]\displaystyle 412.072 \ g \ Cl_2[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
412.072 g Cl₂ ≈ 412 g Cl₂
100.0 g of water was placed in a simple, constant-pressure calorimeter. The temperature of the water was recorded as 295.0 K. A 20.0 g copper block was heated to 353.0 K and then dropped into the water in the calorimeter. What was the final temperature of the water if the specific heat capacities of copper is 0.385 J/g K
Answer:
[tex]296.05\ \text{K}[/tex]
Explanation:
[tex]m_w[/tex] = Mass of water = 100 g
[tex]c_w[/tex] = Specific heat of water = [tex]4.184\ \text{J/g K}[/tex]
[tex]m_c[/tex] = Mass of copper = 20 g
[tex]c_c[/tex] = Specific heat of copper = [tex]0.385\ \text{J/g K}[/tex]
[tex]\Delta T_w[/tex] = Temperature change in water = [tex](T-295)[/tex]
[tex]\Delta T_c[/tex] = Temperature change in cooper = [tex](353-T)[/tex]
T = Final temperature of the system
The heat balance of the system is given by
[tex]m_wc_w\Delta T_w=m_cc_c\Delta T_c\\\Rightarrow 100\times 4.184\times (T-295)=20\times 0.385\times (353-T)\\\Rightarrow 418400\left(T-295\right)=7700\left(353-T\right)\\\Rightarrow 418400T-123428000=2718100-7700T\\\Rightarrow T=\frac{1261461}{4261}\\\Rightarrow T=296.05\ \text{K}[/tex]
The final temperature of the water is [tex]296.05\ \text{K}[/tex].
The final temperature of the water when placed in a calorimeter is 296.05K
HOW TO CALCULATE FINAL TEMPERATURE:
The final temperature of water placed in a calorimeter can be calculated using the following expression:Q(water) = - Q(copper)(m × c × ∆T) water = - {m × c × ∆T} copperWhere;
Mass of water = 100 gSpecific heat of water = 4.184 J/g KMass of copper = 20 gSpecific heat of copper = 0.385 J/g KTemperature change in water = T - 295KTemperature change in copper = T - 353K100 × 4.184 × (T - 295) = - {20 × 0.385 × (T - 353)}418.4T - 123428 = - (7.7T - 2718.1)418.4T - 123428 = -7.7T + 2718.1418.4T + 7.7T = 123428 + 2718.1426.1T = 126146.1T = 126146.1 ÷ 426.1T = 296.05KTherefore, the final temperature of the water when placed in a calorimeter is 296.05K.Learn more at: https://brainly.com/question/10987564?referrer=searchResults
How will the temperature change if you increase the mass of the gas molecules?
The temperature of a gas sample rises, the molecules quicken, and as a result, the root mean square molecular speed rises.
What is meant by temperature?Degree of warmth or coolness determined by a specific scale
The temperature of a gas sample rises, the molecules quicken, and as a result, the root mean square molecular speed rises.
In a gas, the speed of the molecules is inversely related to the molar mass of the gas and inversely proportional to temperature.
The rate of diffusion is inversely related to the square root of the gas's molar mass, according Graham's law of Diffusion.
To learn more about temperature, refer to the below link:
https://brainly.com/question/13122916
# SPJ2
a. Explain why the pie pans flew off the van de Graaf generator
b. Give a detailed explanation of why the rabbit fur and the plastic rod were attracted to each other after we rubbed them together but not before
c. Describe two things you could change to increase the force of electrical attraction between two objects (this is about Coluomb's Law).
Answer:
Static energy is an energy between two charges.
Explanation:
a). A van de Graff generator builds up a positive electric charge on the dome by separating the negative static electric charges from the positive static charge using a quickly moving belt. The positive charge collects on the large metal dome of the generator. When the charge builds up is large enough, a lighting like spark can shoot from the dome to a grounded discharge rod.
Like electric charges always repel each other, and oppositely electric charges will attract each other. When the aluminum pans are being charged by the van de Graff generator, then each of them attain the same positive polarity similar with the dome. Thus, positive charge starts to accumulate over the surface of each of the pie pan. Each aluminum pan repels the others. These repulsive forces between the pans are so strong that they succeed in overcoming the gravity force and thus the top of the pan is pushed away from the generator's dome.
b). Static electricity is produced by a concentration of negative and positive electric charges. Like charges pushes away each other while unlike charges pulls each other.
Objects generally have same numbers of positive charges as well as negative charges. And if there is any small imbalance in numbers of the charges on the object, it is charged.
Negative charges easily torn away from the materials like the fur or hair. Also, the negative charges are held on other materials like the plastics. If we rub a plastic rod with fur, the negative charges will get transferred from fur to rod. The rod gets negatively charged and the fur is positively charged. As a result, the rabbit fur and the plastic rod were attracted to each other.
c). Coulomb's law stated that :
[tex]$F=\frac{KQ_1Q_2}{d^2}$[/tex] .............(i)
where, [tex]$Q_1$[/tex] and [tex]$Q_2$[/tex] are the charges of two objects d is the distance between two objects.
As from the above equation, we can say that force of electrical attraction between two objects depends on the charges and the distance between objects.
1. The electrical force between two charged object is inversely proportional to the distance of separation between two objects.
Decreasing separation distance (d) between the objects will increase its attraction force.
2. And, increasing the charges of two objects(+ve and -ve) increases the force of attraction between two objects.
Which statement about nuclear fission and nuclear fusion is not correct?
A. Both processes change atoms of one element to another element.
B. Both processes can release huge amounts of energy.
C. Both processes conserve mass.
D. Both processes produce dangerous radiation.
The statement, that describes about nuclear fission and nuclear fusion is "both processes can release huge amounts of energy."
What is nuclear fission and fusion?Nuclear fission is the process by which an atom's nucleus breaks into two or more smaller nuclei. Nuclear fusion is the process by which two light atomic nuclei merge to produce a single heavier one, releasing huge quantities of energy in the process.
Fusion and fission are both nuclear reactions that yield significant amounts of energy that can be used to generate power. However, fission is the splitting of atoms, whereas fusion is the joining of them.
To put in another way, while both nuclear reactions that generate energy, the methods are vastly different. They both produce a lot of energy.
Hence the correct answer is B.
Learn more about nuclear fission and nuclear fusion here
https://brainly.in/question/47666389
#SPJ2
Answer:it’s not B
Explanation:
how many atoms are in 14 moles of cadium
Answer:
14x6.02x10^23=8.428x10^23 atoms
Answer:
atoms are in 14 moles of cadmium. Cadmium is present in some foods and is emitted when fossil fuels like as coal and oil is used, smoking cigarettes. It is used in craft glazes, metal batteries, and coatings. We know that 1 mole of Cadmium (Cd contains) 6.023*1023 atoms, which is Avogadro's number
Explanation:
Laughing gas can decompose into nitrogen and oxygen
Nitrous oxide decomposes into nitrogen and oxygen, according to 2 N2O (g) -> 2 N2 (g) + O2 (g). ... In an experiment, a stream of N2O is passed through a tube 25 mm in diameter and 20 cm long. The flow rate of the gas is 0.75 L/min.
What is the oxidation number of iron in FeO?
Answer:
+2
Explanation:
Answer:
2 electrons
Explanation:
In Iron (II) oxide, or Ferrous Oxide, or FeO, the Iron element (Fe) is bonded to the Oxygen, in the oxidation state of "2". This means that the Iron has accepted 2 electrons from the Oxygen.
Final volume of a .50 M H3PO4 solution prepared from 50 mL of a 6 M H3PO4 solution
Answer:
600 mL
Explanation:
From the question given above, the following data were obtained:
Initial concentration (C₁) = 6 M
Initial volume (V₁) = 50 mL
Final concentration (C₂) = 0.5 M
Final volume (V₂) =?
Using the dilution formula (i.e C₁V₁ = C₂V₂) we can obtain the final volume as illustrated below:
C₁V₁ = C₂V₂
6 × 50 = 0.5 × V₂
300 = 0.5 × V₂
Divide both side by 0.5
V₂ = 300 / 0.5
V₂ = 600 mL
Thus, the final volume is 600 mL
what are the physical properties of matter?
Answer:
Physical properties are typically things you can detect with your senses.
Explanation:
The surface forces that change the surface of the earth are:
Faulting
Erosion
Volcanoes
Earthquakes
Glaciers
Living things
Weathering
Folding
Help ASAP!!
Answer:
erosion
glacier
living things
weathering
Explanation:
Calculate the value of Delta H for the reaction CaCO3 --> CO2 + CaO from the following enthalpy changes:
Ca + C + 3/2 O2 --> CaCO3 ΔH = -1206.9 kJ
Ca + ½ O2 --> CaO ΔH = -635.1 kJ
C + O2 -->CO2 ΔH= - 393.5 kJ
Explanation:
crescents discuss wentz eg
Answer:
2,2,1,2
2 Ca + 2 CO2 + 1 O2 → 2 CaCO3
Explanation:
Got it right on Oddesyware!!!!
20 grams of hydrogen fluoride gas, HF, is dissolved in 0.5 liters of solution. Determine the molarity (M).
Answer:
40
Explanation:
M = n/v hope this helps :b
Given that the nucleophilic substitution reaction used 5.0 mL of t-pentyl alcohol and 12.0 mL of conc. hydrochloric acid to produce t-pentyl chloride, what is the theoretical yield of t-pentyl chloride, in grams
Answer:
4.90 g
Explanation:
Given that:
volume of t-pentyl alcohol = 5 mL
the standard density of t-pentyl alcohol = 0.805 g/mL
Recall that:
density = mass(in wt) /volume
mass = density × volume
mass = 0.805 g/mL × 5 mL
mass = 4.03 g
Volume of HCl used = 12 mL
The reaction for this equation is shown in the image attached below.
From the reaction,
88.15 g of t-pentyl alcohol reacts with concentrated HCl to yield 106.59 g pf t-pentyl chloride.
4.03 g of t-pentyl alcohol forms,
[tex]= \dfrac{106.59 \ g \times 4.03 \ g}{88.15 \ g}[/tex] of t-pentyl chloride.
Therefore,
Theoretical yield of t-pentyl chloride = 4.90 g
The formula for the pH of a solution of hydronium ions is given by the logarithmic equation pH= -log[h3o^+], where [H3o^+] is the hydronium ion concentration. Find the pH of a certain agricultural product with the hydronium ion concentration of 4.7x10^-4
The pH is =?
Answer:
pH = 3.3
Explanation:
Step 1: Given data
Concentration of hydronium ions in the agricultural product ([H₃O⁺]): 4.7 × 10⁻⁴ M
Step 2: Calculate the pH of the agricultural product
We will use the definition of pH.
pH = -log [H₃O⁺]
pH = -log 4.7 × 10⁻⁴
pH = 3.3
Since the pH < 7, the agricultural product is acidic.
describe two sources of energy and explain how they work
please help me (50points)
Solar energy:-
In this way the energy generated through sun light with the help of solar panels and to be used in many works.
Wind energy:-
This is generated by moving turbines with windmills .It is used to create electric energy
Question 3 of 10
Which best explains why the sun maintains its size and shape?
A. Pressure caused by high temperatures are balanced by gravity.
B. The sun burns from its core to its surface.
C. Forces exerted by orbiting planets cause the sun to rotate.
SUBMIT
Answer:A
Explanation:
Balance this reaction:
___Naz3(PO4)+ ___K(OH) ---> ___Na(OH) +___K3(PO4)
The bullet train was traveling at a speed of 200mi/hr for 2 hours. What
was the total distance traveled? *
O 100mi
O 01mi
O 40mi
O 400mi
Answer:
Distance is speed x time
So 200 x 2 =400mi
The city of Annandale has been directed to upgrade its primary wastewater treatment plant to a secondary treatment plant with sludge recycle that can meet an effluent standard of 11 mg/l BOD5. The following data are available: Flow = 0.15 m3/s, MLSS = 2,000 mg/L. Kinetic parameters: K, = 50 mg/L, Hmax = 3.0 d-, kų = 0.06 d-1, Y = 0.6 Existing plant effluent BOD5 = 84 mg/L. a. Calculate the SRT (Oc) and HRT (0) for the aeration tank. b. Calculate the required volume of the aeration tank. c. Calculate the food to microorganism ratio in the aeration tank. d. Calculate the volumetric loading rate in kg BOD3/m3-d for the aeration tank. e. Calculate the mass and volume of solids wasted each day, when the underflow solids concentration is 12,000 mg/L. 10 A
ii) Sodium thiosulphate dissolves in dilute nitric acid at a steady rate. Copy out which
of the following changes would quicken up the reaction- 3
a. Cooling the reacting vessel to drop the temperature.
b. Breaking the reactants into smaller pieces.
c. Adding more concentrated acid.
d. Using more sodium thiosulphate.
Answer:
d
Explanation:
What is the difference between chemical change and physical change
Answer:
In a physical change the appearance or form of the matter changes but the kind of matter in the substance does not. However in a chemical change, the kind of matter changes and at least one new substance with new properties is formed.
How does an electric field change and influence its surroundings?
Answer:
The electric force acts over the distance separating the two objects. ... The space surrounding a charged object is affected by the presence of the charge; an electric field is established in that space. A charged object creates an electric field - an alteration of the space or field in the region that surrounds it.
Explanation:
