Which of the following could be classified as a molecular element?

Question 1 options:

krypton
lithium
nitrogen
calcium
All four are classified as molecular elements.

I don't know the answer ?

gujarati (language)

Answer:

Enter your numerical answer to 1 decimal place. Do not include the units of "g". Question: Question 14 1 pts Consider the following reaction, where A and E are hypothetical elements. A+3E --> AE The atomic mass of A is 42.1 amu. The atomic mass of Eis 56.2 amu. If 42.6 g of A fully reacts, how many grams of AE, are expected to form?

Answer:

Cr(NO3)3 (aq) +K3PO4 (s)

Explanation:

Answer:

CH3—CH2—O—CH2—CH3 is the compound of glycol.

Answer:

HOH2C―CH2―CH2―CH2OH is glycol

Explanation:

Answer:

all i can accurately say is that 2 and 4 are both true

Answer:

See explanation

Explanation:

A system is said to have attained dynamic equilibrium when the rate of forward reaction and the rate of reverse reaction are equal.

Considering the system under consideration;

I2(s)⇄I2(g)

Heating the container converts solid iodine to purple coloured iodine vapour.

At equilibrium, there will be no net change in the amount of solid iodine and iodine vapour present in the system because the two processes (forward and reverse reactions) occur at the same rate at equilibrium.

Answer:

39.02

Explanation:

From the question given above, the following data were obtained:

Isotope A:

Mass of A = 38

Abundance of A (A%) = 9.67%

Isotope B:

Mass of B = 39

Abundance of B (B%) = 78.68%

Isotope C:

Mass of C = 40

Abundance of C (C%) = 11.34%

Isotope D:

Mass of D = 41

Abundance of D (D%) = 0.31%

Average atomic mass of X =?

The average atomic mass of X can be obtained as follow:

Average = [(Mass of A × A%)/100] + [(Mass of B × B%)/100] + [(Mass of C × C%)/100] + [(Mass of D × D%)/100]

= [(38 × 9.67)/100] + [(39 × 78.68)/100] + [(40 × 11.34)/100] + [(41 × 0.31)/100]

= 3.6746 + 30.6852 + 4.536 + 0.1271

= 30.02

Thus, the average atomic mass of X is 39.02

Answer:

0.512 M

Explanation:

We'll begin by calculating the number of mole in 12 g of C₂H₆O₄. This can be obtained as shown below:

Mass of C₂H₆O₄ = 12 g

Molar mass of C₂H₆O₄ = (2×12) + (6×1) + (4×16)

= 24 + 6 + 64

= 94 g/mol

Mole of C₂H₆O₄ =?

Mole = mass /molar mass

Mole of C₂H₆O₄ = 12 / 94

Mole of C₂H₆O₄ = 0.128 mole

Next, we shall convert 250 mL to L. This can be obtained as follow:

1000 mL = 1 L

Therefore,

250 mL = 250 mL × 1 L / 1000 mL

250 mL = 0.25 L

Thus, 250 mL is equivalent to 0.25 L.

Finally, we shall determine the molarity of the solution. This can be obtained as follow:

Mole of C₂H₆O₄ = 0.128 mole

Volume = 0.25 L

Molarity =?

Molarity = mole /Volume

Molarity = 0.128 / 0.25

Molarity = 0.512 M

Thus, the molarity of the solution is 0.512 M

Answer:

See explanation

Explanation:

In Bohr's theory, electrons are found in specific regions in space called orbits. These orbits are also called energy levels. An electron may move from one energy level to another by absorbing or emitting energy.

In the wave mechanical model, electrons are not found in a particular region in space according to Heisenberg's uncertainty principle.

We rather define a certain region in space where there is a high probability of locating the electron. This region in space where there is a high probability of locating the electron is called an orbital.

Hence, in the Bohr's model of the atom,electrons can surely be found in orbits while in the wave mechanical model, the orbital is a probability function that describes a region in space where an electron may be found.

Answer:

Answer below (in explanation)

Explanation:

First find the average atomic mass of the element in question (on the periodic table)

Set up the relative abundance formula: (M1)(x) + (M2)(1-x) = M(E)

Where M1 = Mass of the first isotope, X = Relative abundance, M2 = mass of the second isotope, M(E) = Atomic mass of the element

Plug in your values (i'll use nitrogen as an example) :

(background info: The mass of one isotope, nitrogen-14, is 14.003 amu and another isotope, nitrogen-15, is 15.000 amu, find the relative abundance of the isotopes.

14.003x + 15.000(1-x) =14.007

Use algebra and solve for X. First use distributive property, combine like terms, and solve for X.

It would equal X = 0.996. Multiply by 100 to get a proper percentage and the percentage abundance of Nitrogen-14 is 99.6%

This way of solving is limited to 2 isotopes only.

Done

Answer:

bitter leaf soups

Explanation:

because it cures gems out our body system

The salt CaCl2 (calcium chloride) and water (H2O) are formed in this reaction. Also formed is the gas carbon dioxide (CO2) which may cause a bloated feeling in the stomach. The acid that is secreted in your stomach is approximately 0.1 M (moles per liter) hydrochloric acid.

I hope it helps ●~●

Answer:

Molecular mass, M = 58.20 g/mol.

Explanation:

Given the following data;

Conversion:

760 mmHg = 1 atm

770 mmHg = 770/760 = 1.0131 atm

Temperature = 25°C = 273 + 25 = 298 K

To find the molecular mass, we would use the ideal gas law equation (density version);

PM = dRT

Where;

Making M the subject of formula, we have;

[tex] M = \frac {dRT}{P} [/tex]

Substituting into the formula, we have;

[tex] M = \frac {2.41 * 0.0821 * 298}{1.0131} [/tex]

[tex] M = \frac {58.9626}{1.0131} [/tex]

Molecular mass, M = 58.20 g/mol.

Answer:

thnx for the points too muchee

Explanation:

Answer:

Explanation:

[tex]{hope it helps}}[/tex]

Answer:

a

Explanation:

Mixture is a combination of two or more elements and sodium is an element with a chemical symbol Na and a charge of +1 and chloride too is an element with a chemical symbol Cl and a charge of -1 so when these two elements are combine it form a chemical solution called Sodium chloride

Answer:

Explanation:

Overuse of antibiotics leads to bacteria's resistance against our drugs. This is increasing at an alarming rate and the reason is that overuse of antibiotics kills bacteria that lack the "resistance" gene or gene that can help them survive the antibiotics (similar is the case for insects that die to insecticides). But, some bacteria can have random mutations in their gene that can help them survive the antibiotic (similar is the case for some insects that can survive the insecticide), thus the surviving bacteria give rise to next generation of bacteria that are resistant to the given antibiotic (similar to how insects that survive the insecticide give birth to new insects that are resistant to insecticide too). Soon, every generation adds new antibiotic resistant bacteria (or new insecticide resistant insects in the case of insects) which is dangerous for all of life on this planet. Therefore, both are similar in the sense that new generations of these organisms will be resistant to our weapons against them.

Answer:

3.1 kg

Explanation:

Step 1: Write the balanced combustion equation

C₈H₁₈ + 12.5 O₂ ⇒ 8 CO₂ + 9 H₂O

Step 2: Calculate the moles corresponding to 1.0 kg of C₈H₁₈.

The molar mass of C₈H₁₈ is 114.23 g/mol.

1.0 × 10³ g × 1 mol/114.23 g = 8.8 mol

Step 3: Calculate the moles of CO₂ produced from 8.8 moles of C₈H₁₈

The molar ratio of C₈H₁₈ to CO₂ is 1:8. The moles of CO₂ produced are 8/1 × 8.8 mol = 70 mol.

Step 4: Calculate the mass corresponding to 70 moles of CO₂

The molar mass of CO₂ is 44.01 g/mol.

70 mol × 44.01 g/mol = 3.1 × 10³ g = 3.1 kg

Answer:

SLS functions in cleaning product as a surfactant, wetting surfaces, emulsifying or solubilizing oils, and suspending soil so that they can be rinsed away. This ingredient contributes foaming properties to cleaning products. SLS is safe for use in cleaning products.

Sodium lauryl sulfate and ammonium lauryl sulfate are surfactants that help with the mixing of oil and water. As such, they can clean the skin and hair by helping water to mix with oil and dirt so that they can be rinsed away or suspend poorly soluble ingredients in water.

The U.S. Food and Drug Administration (FDA) includes sodium lauryl sulfate on its list of multipurpose additives allowed to be directly added to food. Sodium lauryl sulfate and ammonium lauryl sulfate are also approved indirect food additives. For example, both ingredients are permitted to be used as components of coatings.

The safety of sodium lauryl sulfate and ammonium lauryl sulfate has been assessed by the Cosmetic Ingredient Review  (CIR) Expert Panel on two separate occasions (1983 and 2002), concluding each time that the data showed these ingredients were safe in formulations designed for brief, discontinuous use, followed by thorough rinsing from the surface of the skin. In products intended for prolonged contact with skin, concentrations should not exceed 1%.  

Sodium lauryl sulfate and ammonium lauryl sulfate may be used in cosmetics and personal care products marketed in Europe according to the general provisions of the Cosmetics Regulation of the European Union.

Learn more about Sodium lauryl sulfate and ammonium lauryl sulfate

https://brainly.com/question/12149356

#SPJ2

Answer:

O 100

Explanation:

Answer:

bakit Kay's lahat Ng module mahirap

Answer: The statement conjugate base of hydrofluoric acid is weaker than that of acetic acid is most likely true.

Explanation:

A strong acid upon dissociation gives a weak conjugate base. This can also be said as stronger is the acid, weaker will be its conjugate base or vice-versa.

Hydrofluoric acid is a strong base as it dissociates completely when dissolved in water.

For example, [tex]HF \rightleftharpoons H^{+} + F^{-}[/tex]

The conjugate base is [tex]F^{-}[/tex] which is a weak base.

Acetic acid is a weak acid as it dissociates partially when dissolved in water. So, the conjugate base of acetic acid is a strong base.

[tex]CH_{3}COOH \rightarrow CH_{3}COO^{-} + H^{+}[/tex]

Thus, we can conclude that the statement conjugate base of hydrofluoric acid is weaker than that of acetic acid is most likely true.

Answer:

A. The red side is acidic.

B. Because it has more positive hydrogen ions.

C. The blue side is basic.

D. Because it has more negative hydroxide ion.

Given the data from the question,

A. The side with more H⁺ is acidic

B. It is acidic because it contains more H⁺

C. The side with more OH¯ is basic

B. It is basic because it contains more OH¯

This is simply a measure of the acidity / alkalinity of a solution.

The pH measures the hydrogen ion concentration while the pOH measures the hydroxide ion concentration

The pH scale is a scale that gives an understanding of the variation of the acidity / alkalinity of a solution.

The scale ranges from 0 to 14 indicating:

The presence of H⁺ indicates acidity.

Thus, the side with more H⁺ is acidic.

The presence of OH¯ indicates the solution is basic.

Therefore, the side with more OH¯ is basic

Learn more about pH:

https://brainly.com/question/3709867

Answer:

c

Explanation:

Nh4OH + HCL ---> NH4Cl + H3O

so ph decreases as H3O increases

and OH also decreases

When NH4OH is added to a solution with HCI, the pH of the solution B ) increases as the OH- concentration increases.

NH₄OH is a strong base as a result of the presence of the OH compound which is a base as well. Bases have high pH and acids have low pH.

This means that as the OH- concentration increases, the solution is being made to be more basic which would lead to the pH rising.

In conclusion, option B is correct.

Find out more on Bases at https://brainly.com/question/15565260.

Answer:

electron configuration

Explanation:

The arrangement of electrons in the atomic orbitals of an atom is called the electron configuration. Electron configurations can be determined using a periodic table.

Answer:

Explanation to the following question is as follows;

Explanation:

Any phenomenon that would have the potential to cause severe death or property damage is considered a danger. When the potential for devastation is realised, a hazard becomes a disaster. All catastrophes are risks, but not all risks are catastrophes. Hazards do not always result in devastation.

Answer:

I hope this will help you.

Answer:

exactly 0.10071444308 mols or just 0.1 mols

Explanation:

converting 6.4 g of copper to moles is done by using it's Molar Mass we can find the Molar Mass by lookin at the periodic table or just googling it. In this case, copper's molar mass is 63.546g per Mole. so thats 6.4/63.546 = 0.015736631731344 moles of copper

Answer:

80 m/s.

Explanation:

NOTE: This is a physics question. However, the solution to the question given below:

From the question given above, the following data were obtained:

Acceleration (a) = 2 m/s²

Initial velocity (u) = 20 m/s

Time (t) = 30 s

Final velocity (v) =?

The final velocity of the train can be obtained as shown below:

v = u + at

v = 20 + (2 × 30)

v = 20 + 60

v = 80 m/s

Therefore, the final velocity of train is 80 m/s.