Answer: Not including gamma-rays, x-ray has the shortest wavelength,
How are mass and volume alike?
They always stay the same
They are both measured in grams
The cease to exist when placed in a liquid
Answer:
its b
Explanation:
b
what reactions do catalytic converters catalyze
Which of the following is an example of work: bowling or reading?
Answer:
bowling
Explanation:
bowling is an example of work because it involves hand movement.
Do you believe that global warming is happening? Tell why or why not. If you believe global warming is happening, what can we do to slow it down?
Answer:
Yes I do believe global warming is happening, mainly because there is a plethora of data and research from scientists to support the claim. The effects of global warming around us are clearly observed as well, such as the rise in acidity in the oceans. Another example is in the Artic, where a natural occurence takes place. Ice freezes and cold salty water takes its place, and because of it's high density it sinks and sweeps across the ocean floor. That cold water is then replaced by warmer water, and this is called the global ocean conveyor belt. As seen through the example with the Artic, ocean temperature plays a key role in the conveyor belt. Climate change is fueled through human activities, which could harm the system. If one part of the conveyor belt were to break down, such as the one in the Artic, nutrients will not be distributed to start the food chain. Organisms such as phytoplankton need those nutrients to thrive. If phytoplankton are endangered, all life in the oceans is endangered. So as we can see, global warming is extremely harmful to the environment and it's effects are observed around us.
To slow global warming down we should consume less meat, and go to vegan or vegetarian diets. Your carbon footprint is halved by consuming less meat and eating a more vegan or vegetarian diet. Another thing is that we as a society should stop using so much plastic. It takes more than a century to degrade, most landfills are composed of it. Microplastics also get into our oceans, and our fish end up consuming them.
Explanation:
In your own words explain how acceleration differs from uniform motion.
Explanation:
acceleration is the Changing of throut per unit time ....
and in uniform motion .....
in that the speed of an object is uniform means same
Which of these force&mass pairs will result in the largest acceleration? *
50 N and 5 kg
60 N and 3 kg
30 N and 1 kg
25 N and 100 kg
10 N and 8 kg
Answer:
30N and 1 kg has largest acceleration
hope it helps youWrite down the factors on which moment depends upon ?
Answer:
The size of a forceThe perpendicular distance from the pivot the line of action of forceExplanation:
Factors that affect the moment of a force are;
The size of a forceThe perpendicular distance from the pivot the line of action of forceThe magnitude of force applied is directly proportional to the moment of force in that for a perpendicular distance d, increased in force applied will result to a higher moment of force. When the perpendicular distance from the pivot is decreased while the force applied remains constant, the moment of force decreases.
Which statement describes the relationship between bond strength and the
melting and boiling points of a substance?
A. Substances held together by hydrogen bonding have lower melting
and boiling points than those held together by Van der Waals
forces.
B. Substances held together by ionic bonding have higher melting
and boiling points than those held together by hydrogen bonding.
C. Substances held together by Van der Waals forces have higher
melting and boiling points than those held together by ionic
bonding
O D. Substances held together by ionic bonding have lower melting and
boiling points than those held together by hydrogen bonding.
SUB
Answer: Wrong
Explanation:
The statement that accurately describes the relationship between bond strength and the melting and boiling points of a substance is; "substances held together by ionic bonding have higher melting and boiling points than those held together by hydrogen bonding."
Intermolecular forces refers to forces of attraction that holds molecules together in a particular state of matter. The nature and magnitude of intermolecular forces impacts on the magnitude of the melting and boiling points of substances.
Substances held together by ionic bonding have higher melting and boiling points than those held together by hydrogen bonding. The bonds between ionic substances can only be broken at very high temperature.
Learn more: https://brainly.com/question/865531
Ozone gas in the atmosphere protects living things on Earth from some of the Sun's harmful
rays. The chemical formula for ozone is 03.
Complete the statement.
Ozone is
an elementary substance
or is it an compound
Answer:
Ozone is a compound.
Explanation:
Elements are simple atoms that can merge or combine to produce a bigger molecule called a compound. They can not be splitted into smaller atoms. Examples are: hydrogen, carbon, etc.
A compound is formed as a result of the combination of two or more elements. They can be splitted into elements. Examples are: ammonium, water, carbon dioxide etc.
Ozone ([tex]O_{3}[/tex]) is a less stable allotrope of oxygen which is made up of three atoms of oxygen. Therefore, it is a compound.
What is the main difference between speed and velocity?
Answer:
Speed is the time rate at which an object is moving along a path, while velocity is the rate and direction of an object's movement.
Answer:
Speed is the time rate at which an object is moving along a path, while velocity is the rate and direction of an object's movement.
Explanation:
Sam is moving house and is carrying a 300N box of books up a flight of steps 5m high, it takes her 30 seconds. Gary follows her carrying a bag of clothes doing 1000 J of work; it only takes him 25 seconds. Who provides the biggest power? Show your working.
Answer:
Sam is providing the biggest power i.e. 50 W
Explanation:
Sam is moving house and is carrying a 300N box of books up a flight of steps 5m high, it takes her 30 seconds.
Sam's power :
[tex]P_1=\dfrac{W_1}{t_1}\\\\P_1=\dfrac{F_1d}{t_1}\\\\P_1=\dfrac{300\times 5}{30}\\\\P_1=50\ W[/tex]
Gary follows her carrying a bag of clothes doing 1000 J of work; it only takes him 25 seconds.
Gary's power :
[tex]P_2=\dfrac{W_2}{t_2}\\\\P_2=\dfrac{1000}{25}\\\\P_2=40\ W[/tex]
So, it is clear that Sam is providing the biggest power.
If an element forms a 2+ ion in which group of the periodic table would you expect to find it
4. The electric force between electric charges is much larger than the
gravitational forces between charges. Why, then, is the gravitational force
between the Earth and the Moon much larger than the electric force between
them?*
A. The electric force is small in comparison because charges are VERY small but the
gravitational force has to do with the mass of the Earth and Moon.
B. The electric charge is actually greater and the question is false.
C. The phases of the Moon determine the amount of electric and gravitational force.
The electric force is small in comparison because charges are VERY small but the
gravitational force has to do with the mass of the Earth and Moon.
What causes the electrons to move in the “Electromagnetic Induction” animation?
a.
Current
c.
Changes in magnetic field
b.
Voltage
d.
Kinetic energy
Please select the best answer from the choices provided
A
B
C
D
Answer:
Change in the magnetic field
Gravity can be described as (2 points)
O a magnetic force found in nature
O the force that moves electrical charges
O the force that repels object with like charges
O the force of attraction between two objects
If the mass of a box is 200 Kg, with what net force would you use to make the box accelerate 2.4 m/s 2 ?
Answer:
The net force used on the box was 480 N
Explanation:
Mechanical Force
According to the second Newton's law, the net force exerted by an external agent on an object of mass m is:
F = ma
Where a is the acceleration of the object.
The mass of a box is m=200 kg and it's accelerated at a=2.4\ m/s^2 by a net force whose magnitude is:
F = 200 * 2.4 N
F = 480 N
The net force used on the box was 480 N
A 58 kg skier starts at rest from a 24.0 m high hill. They travel to the bottom and then up a second hill to a height of 19.0 m. How much kinetic energy do they have at the top of the second hill?
Answer:
10.791 kJ
Explanation:
Given that,
Mass of the skier, m = 58 kg
Initial position, h₁ = 24 m
Final position, h₂ = 19 m
We need to find the kinetic energy do they have at the top of the second hill.
Using the conservation of energy for both positions.
[tex]v_1=\sqrt{2gh_1} \\\\=\sqrt{2\times 9.8\times 24} \\\\=21.68\ m/s[/tex]
And
[tex]v_2=\sqrt{2gh_2} \\\\=\sqrt{2\times 9.8\times 19} \\\\=19.29\ m/s[/tex]
Kinetic energy :
[tex]K=\dfrac{1}{2}mv_2^2\\\\K=\dfrac{1}{2}\times 58\times 19.29^2\\\\=10791.01 J\\\\=10.791\ kJ[/tex]
So, the kinetic energy they have at the top of the second hill is 10.791 kJ.
what english word does the following- the first two signify a male, the 1st 3 letters support a female, the first four support a great signifiles a woman. What is the english word?
Answer:
lol i know - i was rushing -_-
he= male
her=female
One word with both is heroin but Im not 100% sure
What is the acceleration due to gravity near the earth’s surface?
Its value is 9.8 m/s2 on Earth. That is to say, the acceleration of gravity on the surface of the earth at sea level is 9.8 m/s2
thank me and mark me as brainliest
Tyler is in downtown San Antonio entertaining the tourists with amazing feats of physics. He carries a nickel
(mass of 5.0 grams) up to the top of the Tower of the Americas and places it on the edge of the observation
deck, a height of 124 meters. Tyler pushes the nickel off the edge of the Tower, and then tells the tourists
that he will be able to calculate the velocity of the nickel just before it hits the ground. What will be the
nickel's velocity?
Answer:
The velocity of the nickel just before it hits the ground is approximately 49.3 m/s
Explanation:
In order to calculate the velocity of the nickel just before it hits the ground, we recall the kinematic equation of motion, v² = u² + 2·g·h, where the variables of the equation are defined as follows;
v = The velocity of the nickel just before it hits the ground after it is pushed off the observation deck
u = The initial velocity of the nickel just before it is pushed off the observation deck = 0 m/s
g = The acceleration due to gravity = 9.8 m/s²
h = The height from which he nickel is pushed off the edge = 124 m
Substituting the given values and the constant, "g", we have;
v² = 0² + 2 × 9.8 × 124 = 2,430.4
v = √2,430.4
Using a graphing calculator, we have;
v = √2,430.4 = 14·√(62/5) ≈ 49.3
The velocity of the nickel just before it hits the ground = v ≈ 49.3 m/s.
Which statement accurately compares the trends in atomic number and atomic mass in the periodic table?
O The atomic number increases from left to right, while the atomic mass increases from right to left.
O The atomic mass increases from left to right, while the atomic number increases from right to left.
O Both the atomic mass and the atomic number increase from left to right.
O Both the atomic mass and the atomic number increase from right to left.
Answer:
C.
That is your answer
What is everything in our physical environment made of? *
A matter
B solids
C gases
Answer: matter
Explanation:
Sam is moving house and is carrying a 300N box of books up a flight of steps 5m high, it takes her 30 seconds. Gary follows her carrying a bag of clothes doing 1000 J of work; it only takes him 25 seconds. Who provides the biggest power? Show your working.
Answer: Sam provides the biggest power
Explanation: Power is defined, in Physics, as the rate of work done. Work is energy transferred to an object due to the force causing the displacement of the object.
So, to determine Power:
For Sam:
P = [tex]\frac{work}{time}[/tex]
[tex]P=\frac{F.d}{t}[/tex]
[tex]P=\frac{300.5}{30}[/tex]
P = 50 Watts
The unit for Power is [P] = J/s = Watt
For Gary:
P = [tex]\frac{work}{time}[/tex]
[tex]P=\frac{1000}{25}[/tex]
P = 40 Watts
Comparing power of Sam and Gary, we can conclude that Sam provides the biggest power of 50 Watts.
A funnel shaped low pressure system that is typically associated with strong thunderstorms is a(n)_______. *
Answer:
Tornadoes
A tornado is a violently rotating column of air that is in contact with both the surface of the Earth and a cumulonimbus cloud or, in rare cases, the base of a cumulus cloudExplanation:
You may have noticed that there was a big difference in the results of
the two hollow pipe experiments, but very little difference in the solid chunk experiments.
Why do you think this was the case?
ANSWER QUICK PLS!
Answer:
For conduction you don't need position. For convection you do.
Explanation:
you just needed to look it up LOL <3
An LED light bulb is favored over an incandescent light bulb because it is more , what?
An LED light bulb is favoured because it is more bright.
An LED light is favored over an incandescent light bulb because it is more bright than the incandescent bulb.
What is an LED bulb?An LED is a light emitting diode. It is used widely for the production of light because it shows some advantages which include:
Many traditional lighting systems like the incandescent bulbs turn more than 90% of the energy which they use to heat, allocating only about 10% of energy to actual light production. LEDs emit almost no heat energy, and most of the light energy they emit is within the visible spectrum.
LEDs use much less energy than that of incandescent bulbs because the diode light is much more efficient, power-wise, than the filament light. LED bulbs use more than 75% less energy than those of incandescent lighting.
Learn more about LED bulb here:
https://brainly.com/question/30272515
#SPJ6
A box is pushed 40 meters by a mover. The amount of work done was 2,240 joules. How much force was exerted on the box?
Write the formula used in the correct form and your answer with the appropriate unit.
Answer:
56N
Explanation:
Given parameters:
Distance = 40m
Work done = 2240J
Unknown:
Force exerted = ?
Solution:
The work done on a body is the force applied to move a body through a certain distance.
Work done = Force x distance
Now insert the parameters and solve for the force
2240 = Force x 40
Force = 56N
If the only force acting on an object is friction during a given physical process, which of the following
assumptions must be made in regard to the object's kinetic energy?
Answer:
The kinetic energy decreases.
Explanation:
Friction is defined as a opposite force to motion. If friction is the only force acting on an objects, its kinetic energy decreases.
It is so because due to resistive force or friction, kinetic energy is converted to heat energy and that reduces the total kinetic energy in the system.
Hence, the correct answer is "The kinetic energy decreases."
The assumptions must be made base in the object’s kinetic energy in a situation whereby frictional force is the only force acting on an object is A:The kinetic energy decreases.
Frictional force can be regarded as opposing force that is formed between two surfaces which have their movement in the same direction or opposite directions. Friction always brings about reduction in motion of a body which in turn bring a decrease to it's kinetic energy, because it us an energy of motion.Therefore, option A is correct.
Learn more at:
https://brainly.com/question/3763752?referrer=searchResults
YALL PLS HELP ME! CAN YOU GUYS CHECK MY ANSWERS?
Answer:
1. Newton's First Law of Motion
2.Newton's Third Law of Motion
3.Newton's Third Law of Motion
4.Newton's Second Law of Motion
5.Newton's Third Law of Motion
6.Newton's Second Law of Motion
7.Newton's First Law of Motion
Explanation:
Newton's First Law of Motion states that an object remain at rest or moving with a uniform velocity unless an external force acts on it. This is the law of inertia
Newton's Second Law of Motion states that the force of an objects is the product of mass and acceleration.
Newton's Third Law of Motion states that when two objects interact, a pair of forces act on the objects, and they are equal and act in opposite directions.
SI. unit of resistance ?
Answer:
si unit of resistance is Ohm
