which of the following experiments raises ethical concerns

Answer: A. 142.04 g/mol

Explanation:

Answer:

ethyl ethanoate and water

Explanation:

At the point when one fluid doesn't blend in with another yet glides on top of it, an isolating pipe can be utilized to isolate the two fluids. Oil glides on water. This combination can be isolated utilizing an isolating channel as demonstrated on the following page.  

Ethyl liquor and water are two miscible fluids.   Refining is a cycle that can be utilized to isolate an unadulterated fluid from a combination of fluids. An isolating channel can be utilized to isolate the parts of the combination of immiscible fluids.

The answer is ethyl ethanoate and water. Hope this helps you!

Answer:

Malachite

Explanation:

Malachite is a copper carbonate hydroxide mineral, with the equation Cu2CO3(OH)2. This dark, green-joined mineral solidifies in the monoclinic precious stone framework, and frequently shapes botryoidal, sinewy, or stalagmitic masses, in cracks and profound, underground spaces, where the water table and aqueous liquids give the way to synthetic precipitation. So, the answer is malachite. Best of Luck!

Equilibrium shifts to the right.

OPTION A

Answer:

1.5x10²² particulates

Explanation:

Assuming ideal behaviour, we can solve this problem by using the PV=nRT formula, where:

We input the given data:

And solve for n:

Finally we calculate how many particulates are there in 0.025 moles, using Avogadro's number:

Answer:

0.8853 mL

Explanation:

First we convert 13 lb to kg, keeping in mind that 1 lb = 0.454 kg:

Then we calculate how many mg of acetaminophen should be given, using the recommended dose and infant mass:

Finally we calculate the required mL of suspension, using its concentration:

Answer:

Please find the complete question in the attached file.

Explanation:

It would only be radioactive if the DNA molecule that employed the poly-T rand as templates. Its other molecule of the daughter would not have been radioactive as it did not need dATP for its replication. While each strand of the second molecule includes t, simultaneous reproduction dATP from both daughter molecules is needed so that each of those is radioactive.

Answer:

Mass of sample in mg = 15,285 mg

Explanation:

Given:

Volume of urine sample = 15 ml

Density of sample = 1.019 g/ml

FInd:

Mass of sample in mg

Computation:

Mass = density x volume

Mass of sample in mg = Volume of urine sample x Density of sample

Mass of sample in mg = 1.019 x 15

Mass of sample in mg = 15.285 gram

Mass of sample in mg = 15.285 x 1,000

Mass of sample in mg = 15,285 mg

Answer: The equilibrium constant for the given chemical reaction is [tex][O_2]^3[/tex]

Explanation:

The equilibrium constant is defined as the ratio of the concentration of the products to the concentration of reactants each raised to the power of their stoichiometric coefficients.

The concentration of all the solids and liquids are considered to be 1 in the expression of equilibrium constant

For the given chemical equation:

[tex]2KClO_3(s)\rightleftharpoons 2KCl(s)+3O_2(aq)[/tex]

The expression of equilibrium constant follows:

[tex]K_{eq}=[O_2]^3[/tex]

Hence, the equilibrium constant for the given chemical reaction is [tex][O_2]^3[/tex]

Answer: The pH of the resulting solution will be 3.001

Explanation:

Molarity is calculated by using the equation:

[tex]\text{Molarity}=\frac{\text{Moles}}{\text{Volume}}[/tex]          ......(1)

We are given:

Moles of NaOH = 0.0224 moles

Molarity of nitrous acid = 0.475 M

Molarity of sodium nitrite = 0.302 M

Volume of solution = 150 mL = 0.150 L          (Conversion factor: 1 L = 1000 mL)

Putting values in equation 1, we get:

[tex]\text{Moles of nitrous acid}=(0.475mol/L\times 0.150L)=0.07125mol[/tex]

[tex]\text{Moles of sodium nitrite}=(0.302mol/L\times 0.150L)=0.0453mol[/tex]

The chemical equation for the reaction of nitrous acid and NaOH follows:

                   [tex]HNO_2+NaOH\rightleftharpoons NaNO_2+H_2O[/tex]

I:                0.07125     0.0224     0.0453

C:             -0.0224     -0.0224   +0.0224

E:              0.04885         -          0.0677

The power of the acid dissociation constant is the negative logarithm of the acid dissociation constant. The equation used is:

[tex]pK_a=-\log K_a[/tex]        ......(2)

We know:

[tex]K_a[/tex] for nitrous acid = [tex]7.2\times 10^{-4}[/tex]

Using equation 2:

[tex]pK_a=-\log (7.2\times 10^{-4})=3.143[/tex]

To calculate the pH of the acidic buffer, the equation for Henderson-Hasselbalch is used:

[tex]pH=pK_a+ \log \frac{\text{[conjugate base]}}{\text{[acid]}}[/tex]         .......(3)

Given values:

[tex][NaNO_2]=\frac{0.0677}{0.150}[/tex]

[tex][HNO_2]=\frac{0.04885}{0.150}[/tex]

[tex]pK_a=3.143[/tex]

Putting values in equation 3. we get:

[tex]pH=3.143-\log \frac{(0.0677/0.150)}{(0.04885/0.150)}\\\\pH=3.143-0.142\\\\pH=3.001[/tex]

Hence, the pH of the resulting solution will be 3.001

Answer:

[tex]m_{Al_2O_3}=118.27gAl_2O_3[/tex]

Explanation:

Hello there!

In this case, if we consider the following chemical reaction, whereby Al2O3 is produced from Al and FeO:

[tex]3FeO+2Al\rightarrow 3Fe+Al_2O_3[/tex]

Thus, since there is 3:1 mole ratio of FeO to Al2O3, it turns out feasible for us to use their molar masses, 71.844 g/mol and 101.96 g/mol respectively, to obtain the grams of the latter as follows:

[tex]m_{Al_2O_3}=250.gFeO*\frac{1molFeO}{71.844gFeO}*\frac{1molAl_2O_3}{3molFeO} *\frac{101.96gAl_2O_3}{1molAl_2O_3}\\\\m_{Al_2O_3}=118.27gAl_2O_3[/tex]

Regards!

Answer:

O HCl will be completely used up while Zn will remain in excess.

Explanation:

In reactions involving two reactants, if one of them is the limiting reactant then the other one has to be the reactant in excess.

Meaning that in this case, the reaction will proceed until HCl is completely used up, and a certain amount of Zn will remain (thus being the reactant in excess).

Answer:

C₅H₈N₂O

Explanation:

The molecular formula denotes the various forms of atoms contained in a molecule at a particular fixed proportion.

The molecular ion M⁺ = 112.0499

and the exact mass values are given as follows:

C = 12.000

H = 1.0078

N = 14.003

O = 15.995

By assumption:

C = 12.000 × 5 = 60.0000

H = 1.0078 × 8 =    1.0078

N = 14.003 × 2 =  28.0060

O = 15.995 × 1 =   15.9950    

                        = 112.0634    

This is approximtely equal to 112.0499.

As such the Molecular formula for the compound = C₅H₈N₂O

Answer:

true because the bonds cannot be broken down

Answer:

Explanation: hell noo

Answer:

Light can be treated like particles because it is made of chunks like things called protons.

Answer: The mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the given balanced equation is 3.03 g.

Explanation:

The given balanced reaction equation is as follows.

[tex]2Al + 6HCl \rightarrow 2AlCl_{3} + 3H_{2}[/tex]

Here, the mole ration of Al and hydrogen produced is 2 : 3

As mass of aluminum is given as 26.98 g. So, moles of aluminum (molar mass = 26.98 g/mol) is as follows.

[tex]Moles = \frac{mass}{molar mass}\\= \frac{26.98 g}{26.98 g/mol}\\= 1 mol[/tex]

So, when 1 mole of Al reacted then 1.5 moles of hydrogen is produced as per the given mole ratio.

Therefore, mass of hydrogen formed is calculated as follows.

[tex]mass = moles \times molar mass\\= 1.5 mol \times 2.02 g/mol\\= 3.03 g[/tex]

Thus, we can conclude that the mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the given balanced equation is 3.03 g.

Answer:

D. Van der Waals forces are the strongest force between H2

molecules and between NH3 molecules.  

Explanation:

Van der Waal’s forces are the forces which arises due to disturbance in the electron density of the molecule.  

These are usually found in non polar molecules. Hence N2 is said to exhibit this force.

Out of these Van der Waals is the weakest force.

Answer:

it will be no.A genotype

Answer:

i think its A

Answer:

If a standard iodine solution is used as a titrant for an oxidizable analyte, the technique is iodimetry. If an excess of iodide is used to reduce a chemical species while simultaneously forming iodine.

Iodine always used in a solution excess KI is given to aid in the solubilization of free iodine, which would be insoluble in clean water during normal circumstances.

Iodine is a kind of element which are mainly used in iodometry titration. It can be represented by I.

A solution would be a homogenous mixture of two components, usually a solute as well as a solvent.

Iodimetry would be a technique that uses a standard iodine solution as a titrant for such an oxidizable analyte. When an excessive amount of iodide is used to decrease a chemical while somehow producing iodine.

To know more about iodine and solution

https://brainly.com/question/16867213

#SPJ2

Answer:

it would be option C

Explanation:

Speed of light = 3×10^8m/s

Planck's constant = 6.626×10^-34 Js

Wavelength = 8 x 10^-9 m

Energy = [(3×10^8) * (6.626×10^-34)] / 8 x 10^-9

Energy = [19.878×10^(8-34)] / 8 x 10^-9

Energy = 2.48475 × 10^(-26+9)

Energy = 2.48×10^-17 J

Answer:

skeletal system

Explanation:

to create and fliter blood and provide frame-work to the human body and support

Answer:

solo I

Explanation:

Según esta teoría para que se produzca una reacción deben cumplirse tres condiciones: Las moléculas de los reactivos tienen que chocar entre sí. Estos choques deben de producirse con energía suficiente de forma que se puedan romper y formar enlaces químicos.

Copper has a density of 8950 kg/m3 = 8.95 kg/dm3 = 8.95 g/cm3. Water has a density of 1000 kg/m3 = 1000 g/L = 1 kg/dm3 = 1 kg/L = 1 g/cm3 = 1 g/mL.

HOPE IT HELPS❤️

Answer:

40.0L of SO2 are produced

Explanation:

To solve this question we need to find the moles of O2 using PV = nRT in order to find the moles. Thus, we can find the limiting reactant and the moles (And volume) of SO2 produced as follows:

Moles O2:

n = PV/RT

n = 1.20atm*55.0L / 0.082atmL/molK*358K

n = 2.25 moles of O2.

Clearly, limiting reactant is O2.

The moles of SO2 produced are:

2.25 moles of O2 * (8mol SO2 / 11mol O2) = 1.6351 moles SO2

Volume SO2:

V = nRT/P

V = 1.6351 moles SO2*0.082atmL/molK*358K / 1.20atm

V = 40.0L of SO2 are produced

Answer:

154 g

Explanation:

Step 1: Write the balanced decomposition equation

2 NaN₃(s) ⇒ 2 Na(s) + 3 N₂(g)

Step 2: Calculate the moles corresponding to 79.5 L of N₂ at STP

At STP, 1 mole of N₂ occupies 22.4 L.

79.5 L × 1 mol/22.4 L = 3.55 mol

Step 3: Calculate the number of moles of NaN₃ needed to form 3.55 moles of N₂

The molar ratio of NaN₃ to N₂ is 2:3. The moles of NaN₃ needed are 2/3 × 3.55 mol = 2.37 mol.

Step 4: Calculate the mass corresponding to 2.37 moles of NaN₃

The molar mass of NaN₃ is 65.01 g/mol.

2.37 mol × 65.01 g/mol = 154 g

Explanation:

Science is the pursuit and application of knowledge and understanding of the natural and social world following a systematic methodology based on evidence

Answer:

The empirical formula is, C4H4S

Explanation:

Number of moles of carbon = 1.119 g/ 44g/mol = 0.025 moles

Mass of Carbon= 0.025 moles × 12 g/ mole = 0.3 g

Number of moles of hydrogen = 0.229/18g/mol × 2 = 0.025 moles

Mass of hydrogen = 0.025 moles × 1 = 0.025 g

Number of moles of sulphur = 0.407g/ 64 g/mol = 0.0064 moles

Mass of sulphur= 0.0064 moles ×32 = 0.2 g

Now we obtain the mole ratios by dividing through by the lowest ratio.

C- 0.025 moles/ 0.0064 moles, H- 0.025 moles/ 0.0064 moles, S- 0.0064 moles/0.0064 moles

C4H4S