Answer:
They are good electrolytes
How much heat is added if .0948g of water is increased in temperature by .728 degrees C?
.289 J
.803 J
1.46 J
.055 J
Answer:
0.289J of heat are added
Explanation:
We can relate the change in heat of a substance with its increasing in temperature using the equation:
q = m*ΔT*S
Where Q is change in heat
m is mass of substance (In this case, 0.0948g of water)
ΔT = 0.728°C
S is specific heat (For water, 4.184J/g°C)
Replacing:
q = 0.0948g*0.728°C*4.184J/g°C
q = 0.289J of heat are added
1125 J of energy is used to heat 250 g of iron to 55 °C. The specific heat capacity of iron is 0.45 J/(g·°C).
What was the temperature of the iron before it was heated?
55 °C
55 °C
35 °C
35 °C
45 °C
45 °C
20 °C
Answer:
45 °C.
Explanation:
From the question given above, the following data were obtained:
Heat (Q) = 1125 J
Mass (M) = 250 g
Final temperature (T₂) = 55 °C
Specific heat capacity (C) = 0.45 J/gºC
Initial temperature (T₁) =?
The initial temperature of the iron can be obtained as illustrated below:
Q = MC(T₂ – T₁)
1125 = 250 × 0.45 (55 – T₁)
1125 = 112.5 (55 – T₁)
Divide both side by 112.5
1125/112.5 = 55 – T₁
10 = 55 – T₁
Collect like terms
10 – 55 = –T₁
–45 = –T₁
Multiply through by –1
45 = T₁
T₁ = 45 °C
Therefore, the initial temperature of the iron is 45 °C
PLZ HELP ME Which of the following is the process by which chloroplasts use carbon dioxide, water, and sunlight to produce sugars and oxygen?
A. Photosynthesis
B. Cellular respiration
c. Reproduction
D. Homeostasis
Answer:
a
Explanation:
solution is an example of______mixtures
Answer:
homogeneous mixture must be the answer
2 Figure 3.1 shows two different forms of carbon, A and B.
A
B
Figure 3.1
a Name the two forms of carbon shown.
Answer:
show the pictures pls specify
Balance in basic solution: O2(g) + Cr³+ (aq) → H₂O2 (1) + Cr₂O7²- (aq)
cr2o72+H2o2-(r3+o2)
Explanation:
r62o72+H2o2-(r3+o2)
what is the most appropriate unit to measure the following; the length of a football field. b) the diameter of a tennis ball
Explanation:
a) m (metre)
b) mm (millimeter)
calculate the maximum mass of ethanol that could be obtained from 30.0g of glucose
Answer:
15.3g
Explanation:
C6H12O6 → 2C2H5OH + 2CO2
1 mol C6H12O6 = 180g
1 mol CH3-CH2-OH = 46g
From 180g glucose ethanol can get = 92g
30g glucose ethanol gives us = (92*30)/180 = 15.33g
HF or HCl which can form the hydrogen bond? Explain your answer.
Answer:
can only form one hydrogen bond each
Explanation:
can only form one hydrogen bond each
Identify any three acids.
Identify any three bases.
In a hospital, bags of saline solution are used to rehydrate patients. They are made by dissolving a specific amount of salt in water. What is the solvent in the saline solution?
A. Bag
B. Patient
C. Saline
D. Water
Water is the solvent in the saline solution. Hence, option D is correct.
What is the solute?A solute is something being dissolved, a solvent is a thing dissolving the item, and the solution is the mixture of the two items.
In a hospital, bags of saline solution are used to rehydrate patients. They are made by dissolving a specific amount of salt in water. Water is the solvent in the saline solution.
Hence, option D is correct.
Learn more about the solution here:
https://brainly.com/question/7932885
#SPJ5
Explain which intermolecular force is primarily responsible for the unusually high boiling point of H2OH2O. Compare the strengths of intermolecular forces of attraction present in a sample of liquid water to the strengths of intermolecular forces of attraction present in liquid samples of H2SH2S, H2SeH2Se, and H2TeH2Te. Justify your answer using the information presented in both tables, and complete the statements below.
Answer:
See explanation
Explanation:
Intermolecular forces are forces of attraction that exist between molecules of a substance in a particular state of matter.
The dominant intermolecular force of attraction in H2O is the hydrogen bond. The hydrogen bond exists between molecules of a substance when the substance is made of hydrogen atoms bonded to atoms of a highly electronegative element. Hence, strong hydrogen bonding accounts for the high boiling point of water.
The magnitude of hydrogen bonding between molecules depends on the electro negativity of the atoms to which hydrogen is bonded.
The more the electro negativity of the atoms to which hydrogen is bonded, the greater the magnitude of intermolecular hydrogen bonding.
Since the electro negativity of elements decrease down the group, the strength of intermolecular hydrogen bonding between the molecules decreases as follows;
H2O> H2S> H2Se> H2Te
If I add sugar into water then _________________
Pls help
Explanation:
When adding sugar to water it became a syrupy solution. Here sugar acts as solute, the water acts as solvent and syrupy acts as solution. When adding sugar to water, the disaccharide of sucrose is converted into monosaccharides of glucose and fructose
Answer:
syrupy solution
Write the relation of M3 with its multiples
Explanation:
HI friends good morning
What is the molecular geometry of a molecule made of two atoms that share one pair of electrons and have no lone electrons pairs?
trigonal pyramidal
linear
trigonal planar
bent
Answer:
linear
Explanation:
Actually I consulted various sources too and that was the most sought answer,I just decided to answer you before studying it too
Differentiate between emperical and
molecular formula. Give an example of
a substance having different emperical
and molecular formula
Answer:
Here’s an example:
CH (methylene) is the empirical formula.
C2H2 is a molecular formula. It is a gas called Ethyne.
C8H8 is an oily liquid called Styrene. It is also a molecular formula.
Now compare: even though the empirical formula for these compounds is the same, they have different molecular formulas and different properties.
Explanation:
Some background information:
The empirical formula is the formula with the lowest whole number ratio of an element in a compound. A molecular formula is the chemical formula of a (molecular) compound. The molecular formula gives us the exact number of atoms or moles in that compound.
I have attached pictures for a better understanding of the empirical formula.
Identify the correct mole ratio for each substance.
Sodium chloride (NaCl)
Na:Cl = 1: _
Ammonium nitrate(NH.NO3)
H:0 = 4: _
Answer:
The mole ratio of H : O in ammonium nitrate is 4 : 3.
Explanation:
We are given a compound named ammonium nitrate having formula
There are 3 elements in this compound which are nitrogen, hydrogen and oxygen.
To calculate the mole ratio, we write the ratio of their subscripts. For this compound,
Which statement describes the law of conservation of energy?
All systems will exchange matter and energy with their surroundings.
All systems can exchange energy, but not matter, with their surroundings.
Energy cannot be created nor destroyed, but it changes from one form to another.
Energy is destroyed in most chemical reactions when new products are formed.
Answer:
All systems will exchange matter and energy with their surroundings.
Explanation:
Answer:c
Explanation:
Are you ready kids?
Aye, aye Captain.
I can't hear you!
AYE, AYE CAPTAIN!
Oooooooooh.
Who lives in a pineapple under the sea?
Spongebob squarepants!
Absorbent and yellow and porous is he?
Spongebob squarepants!
If nautical nonsense be something you wish!
Spongebob squarepants!
Then drop on the deck and flop like a fish!
Spongebob squarepants!
Ready?
Spongebob squarepants.
Spongebob squarepants.
Spongebob squarepants.
Spongebob squarepants.
Spongebob-squarepants.
****URGENT****
I need help!!!
the answers are there, i need someone to explain please!
Explanation:
your answer was correct
Which of these solutions is acidic?
Answer:
Option a is a solution acidic ([OH⁻] = 7.0x10⁻⁹ M).
Explanation:
To know if a solution is acidic we need to calculate the pH and it must be lower than 7. A value of pH equal to 7 is a neutral solution and a solution with a pH value higher than 7 is a basic solution.
a. For the [OH⁻] = 7.0x10⁻⁹ M we have:
[tex] pOH = -log[OH^{-}] = -log(7.0 \cdot 10^{-9}) = 8.15 [/tex]
Now, the pH is:
[tex] pH + pOH = 14 [/tex]
[tex] pH = 14 - pOH = 14 - 8.15 = 5.85 [/tex]
This solution is acidic (pH < 7)
b. [H₃O⁺] = 8.5x10⁻⁸ M
[tex] pH = -log(8.5 \cdot 10^{-8}) = 7.07 [/tex]
This is not an acidic solution. Is a neutral one (pH around to 7).
c. [OH⁻] = 2.5x10⁻⁶ M
[tex] pOH = -log[OH^{-}] = -log(2.5 \cdot 10^{-6}) = 5.60 [/tex]
Then, the pH is:
[tex]pH = 14 - pOH = 14 - 5.60 = 8.40[/tex]
Hence, this is not an acidic solution. It is basic (pH > 7).
Therefore, option a is a solution acidic ([OH⁻] = 7.0x10⁻⁹ M).
I hope it helps you!
A sample of gas occupies 1.2 L at 12.0oC. Assuming pressure remains the same, what would be the volume (in L) of this gas at 67oC?
A.
1.4
B.
1.0
C.
0.2
D.
5.0
E.
6.7
Answer:
e.
6.7
hope it help
.
.
.
.
.
.
A new stable element with an atomic number of 120 and an atomic mass of 246 is created in a particle accelerator. Enough of this element is created to determine that it combines with chlorine in a 1:2 ratio. Element 120 should be placed in the same group as _____ on the periodic table.
Answer:
Be,Mg,Ra etc
Explanation:
It should be palced in group 2A because as it reacts with chlorine in ratio of 1:2 . It's valancy is 2 and is metal as it react with non metal donating two electrons .
one more thing it fits there orderly
PLZ HELP ME WITH MY WORK
What is a compound?
A substance that is made from two different metals
B. A substance that cannot be broken into simpler substances
C. A substance that is made using a chemical reaction
D. A substance that can be separated by physical means
Answer:
C.
Explanation:
Answer A is incorrect because a compound doesn't have to be made with only metals.
Answer B is incorrect because that is actually the definition of a pure element.
Answer C is correct because to make a compound, there has to be a chemical reaction where bonds are formed and an entirely new substance is created.
Answer D is incorrect because compounds cannot be separated by physical means.
Hope this helps :D
can you solve this science question ⁉️
Answer:
chemical reaction between those a b c it's a reaction which occurs when heating
What is the name for the compound li2so4
Answer:
Explanation:
Lithium Sulphate
Answer:
Lithium sulfate is a white inorganic salt with the formula Li2SO4. It is the lithium salt of sulfuric acid.
hii pls help me to balance the equation thanksss
Explanation:
2KCLO3 (s) = 2KCl (s) + 3O2 (g)
Which of the following is a scientific question you could ask about the game
of basketball?
A. Do you enjoy basketball more than volleyball?
B. Which team is this year's best?
C. Which player should be traded to another team?
D. Do teams that practice more win more games?
SUBMIT
The scientific question related to the game of basketball is option D: "Do teams that practice more win more games?"
This question is scientific because it explores a cause-and-effect relationship between practice and game outcomes. It can be investigated through empirical observation and data analysis.
To answer this question, researchers could collect data on the practice hours of different basketball teams and compare them to their corresponding game performance. Statistical analysis could be used to determine if there is a correlation between practice time and winning percentage or other performance metrics.
By examining a large sample of teams over an extended period, researchers could draw conclusions about the impact of practice on game outcomes. This scientific inquiry would contribute to the understanding of the factors that influence team success in basketball and could potentially inform training strategies and coaching techniques.
For more question on basketball
https://brainly.com/question/29505871
#SPJ8
Small quantities of spilled acids can be made safe with *
1 point
o gasoline.
alcohol.
water.
sodium bicarbonate solution.
Answer:
sodium bicarbonate solution
The number of joules required to heat one gram of a substance one degree Celsius is _____.
endothermic
temperature
exothermic
specific heat capacity
What is an atomic mass unti
Explanation:
a unit of mass used to express atomic and molecular weights, equal to one twelfth of the mass of an atom of carbon-12.
Answer:
Atomic Mass Unit is also called Dalton. It is used to express atomic and molecular weight. It is defined as 1/12 of the mass of an unbound neutral atom of carbon.
