which of the following is a nonanthropogenic source of carbon dioxide emissions into the atmosphere?

If nothing were done to modify the orbit, the speed of the space-shuttle orbiter at the perigee P would be approximately 17085 mi/hr

We can use the principle of conservation of energy to determine the speed of the space-shuttle orbiter at the perigee P.

At the apogee point A, the potential energy of the space-shuttle orbiter is at a maximum, while its kinetic energy is at a minimum. Conversely, at the perigee point P, the kinetic energy is at a maximum, while the potential energy is at a minimum.

The potential energy of the space-shuttle orbiter at any point in its orbit can be calculated as:

U = - G M m / r

where;

The kinetic energy of the orbiter can be calculated as:

K = (1/2) m v^2

where;

Since the sum of the kinetic energy and potential energy remains constant throughout the orbit, we can set the total energy E equal to the sum of the kinetic and potential energies at the apogee point A:

E = U(A) + K(A)

At the perigee point P, the total energy is the same, so we can write:

E = U(P) + K(P)

Equating these two expressions for E, we get:

U(A) + K(A) = U(P) + K(P)

Substituting the expressions for potential and kinetic energy, we get:

G M m / r(A) + (1/2) m v(A)² = - G M m / r(P) + (1/2) m v(P)²

Canceling out the mass of the orbiter and multiplying both sides by -1, we get:

G M / r(A) - (1/2) v(A)² = G M / r(P) - (1/2) v(P)²

Solving for v(P), we get:

v(P) = √[2 G M / r(P) - (1/2) v(A)² + 2 G M / r(A)]

Now we can substitute the given values and solve for v(P):

v(A) = 17246 mi/hr

r(A) = 3959 + 153 = 4112 mi

r(P) = 3959 + 42 = 4001 mi

G M = 1.327 × 10^11 m^3/s^2

Converting units to SI, we get:

v(A) = 7742.6 m/s

r(A) = 6617.6 km

r(P) = 6400.2 km

G M = 3.986 × 10¹⁴ m³/s²

Substituting these values, we get:

v(P) = √[2 (3.986 × 10¹⁴) / (6400.2 × 1000) - (1/2) (7742.6)² + 2 (3.986 × 10¹⁴) / (6617.6 × 1000)]

= 7640.7 m/s

Converting back to miles per hour, we get:

v(P) = 17085 mi/hr (rounded to the nearest mile per hour)

Learn more about conservation of energy here: https://brainly.com/question/27422874

#SPJ1

The velocity of the tennis ball when it is 0.27m from the ground is approximately 3.39 m/s.

What is velocity?

To calculate the velocity of the tennis ball when it is 0.27m from the ground, we can use the principle of conservation of mechanical energy, which states that the total mechanical energy of an object is conserved when it moves through a conservative force field, such as gravity.

At the initial position, the ball has potential energy due to its position above the ground, but no kinetic energy as it is at rest. At the final position, the ball has no potential energy (since it is at the same height as the ground), but it has kinetic energy due to its motion. Assuming that air resistance is negligible, the initial potential energy is converted into final kinetic energy, so we can equate these energies:

mgh = (1/2)mv²

where m is the mass of the ball, g is the acceleration due to gravity, h is the initial height of the ball above the ground, and v is the velocity of the ball when it is 0.27m from the ground.

We can rearrange this equation to solve for v:

v = √(2gh)

Substituting the given values, we get:

v = √(2 x 9.81 m/s² x (1.21 m - 0.27 m)) = 3.39 m/s

Therefore, the velocity of the tennis ball when it is 0.27m from the ground is approximately 3.39 m/s.

To know more about velocity, visit:

https://brainly.com/question/17127206

#SPJ1

The equivalent capacitance of this combination is 9.375 μF, or 9.375 × 10⁻⁶ F in scientific notation.

What is capacitor ?

A capacitor is an electronic component that stores electrical energy in an electric field. It consists of two conductive plates separated by a non-conductive material, called a dielectric. When a voltage is applied to the capacitor, electric charge builds up on the plates, creating an electric field between them. The amount of charge that can be stored on the plates depends on the capacitance of the capacitor, which is determined by the size and spacing of the plates, as well as the properties of the dielectric material.

When capacitors are in series, their effective capacitance is given by:

1/C_series = 1/C_1 + 1/C_2 + ...

In this case, we have two capacitors in series, with capacitances of 25 μF and 15 μF:

1/C_series = 1/25μF + 1/15μF

1/C_series = (15 + 25)/(1525μF²)

1/C_series = 40/(375*μF²)

C_series = 375*μF²/40

C_series = 9.375 μF

Therefore, the equivalent capacitance of this combination is 9.375 μF, or 9.375 × 10⁻⁶ F in scientific notation.

To know more about capacitor visit :-

https://brainly.com/question/27753307

#SPJ1

Period (T):

T = 2π√(m/k)

where m is the mass of the object and k is the spring constant.

Maximum speed (Vmax):

Vmax = Aω

where A is the amplitude of oscillation and ω is the angular frequency, which is given by ω = √(k/m).

Total energy (Wtotal):

W total = 1/2 kA^2

where k is the spring constant and A is the amplitude of oscillation.

Given:

m = 509g = 0.509 kg

A = 13.0 cm = 0.13 m

k = 20.0 N/m

A. Determine the period T:

T = 2π√(m/k)

T = 2π√(0.509 kg / 20.0 N/m)

T = 0.798 s

Therefore, the period of oscillation is 0.798 s.

B. Determine the maximum speed Vmax:

ω = √(k/m) = √(20.0 N/m / 0.509 kg) = 8.05 rad/s

Vmax = Aω = 0.13 m * 8.05 rad/s = 1.05 m/s

Therefore, the maximum speed of the oscillating mass is 1.05 m/s.

C. Determine the total energy W total:

Wtotal = 1/2 kA^2 = 1/2 * 20.0 N/m * (0.13 m)^2 = 0.135 J

Therefore, the total energy of the oscillating mass is 0.135 J.

Energy is a physical property of objects that can be transferred to other objects or converted into different forms, but cannot be created or destroyed. It is often defined as the ability to do work, where work is the product of a force and the distance through which it acts.

Energy exists in many different forms, including mechanical energy associated with motion and position of objects, thermal energy associated with the temperature of objects, electromagnetic energy associated with electric and magnetic fields chemical energy associated with chemical reactions), and nuclear energy associated with the energy released during nuclear reactions.

To know more about Energy visit :

https://brainly.com/question/1932868

#SPJ1

Based on the information given, we can assume that there are two alleles for a particular gene in a population: allele "A" with frequency of 0.19 and allele "a" with frequency of 0.81.

What is the frequency?

If the population is in Hardy-Weinberg equilibrium, then the allele frequencies will remain constant from generation to generation.

According to the Hardy-Weinberg equation, the expected genotype frequencies can be calculated as follows:

What is genotype?

These genotype frequencies should remain constant in future generations as long as the assumptions of the Hardy-Weinberg equilibrium are met, such as random mating, no migration, no mutation, no natural selection, and large population size.

To know more about genotype, visit:

https://brainly.com/question/29156144

#SPJ1

The nuclear family is considered the most essential family unit because it is the family unit with the most fundamental relationships. that's why the Given statement is False.

In a nuclear family, parents and their children live in a household. A nuclear family is a type of family structure that consists of a pair of adults and their children, but not grandparents who live in the family.

It is also called the traditional family, and it is considered to be the basic family unit.A nuclear family is a small family consisting of two parents and their children.

A nuclear family is often known as the basic family unit since it is a family structure consisting of two parents and their children. It is also considered the most prevalent family structure in many countries around the world.

for such more question on nuclear family

https://brainly.com/question/14512503

#SPJ11

Answer:

Explanation:

The work-energy theorem states that the net work done on an object is equal to its change in kinetic energy. Therefore, we can use this theorem to calculate the final kinetic energy of the ball in each case.

We know that the work done by a constant force is given by the equation W = Fd cos(theta), where F is the magnitude of the force, d is the displacement of the ball, and theta is the angle between the force and displacement vectors.

Using the work-energy theorem, we can write:

W = ΔK = Kf - Ki

where ΔK is the change in kinetic energy, Kf is the final kinetic energy, and Ki is the initial kinetic energy.

We can rearrange this equation to solve for Kf:

Kf = Ki + W = Ki + Fd cos(theta)

a) Kf = 150 J + (10 N)(15 m)cos(90°) = 150 J

b) Kf = 300 J + (200 N)(1.5 m)cos(180°) = 0 J

c) Kf = 200 J + (25 N)(4 m)cos(0°) = 300 J

d) Kf = 450 J + (15 N)(30 m)cos(150°) = 112.5 J

Ranking from greatest to least final kinetic energy:

c) Ki=200J F=25N d=4m theta=0 degrees

a) Ki=150J F=10N d=15m theta=90 degrees

d) Ki=450J F=15N d=30m theta=150 degrees​

b) Ki=300J F=200N d=1.5m theta=180 degrees

Answer: simple harmonic motion

Simple harmonic motion. At the instant the spring is no longer compressed(equilibrium), all of our spring potential energy(kx^2/2) has been converted to kinetic energy(mv^2/2). All you have to do is find what your spring potential energy is when the spring is compressed using the spring constant(150N/m) and the distance it's compressed(30cm), use that as your kinetic energy, and solve for the velocity since you already know the mass.

Small bodies with high thermal conductivity, the medium should be a poor conductor of heat and should be motionless in order to favour lumped system analysis.

For small bodies with high thermal conductivity, the features surrounding the medium that favor lumped system analysis are that the medium should be a poor conductor of heat and the medium should be motionless.

In other words, for small bodies with high thermal conductivity, the thermal energy will stay confined within the boundaries of the medium if it is a poor conductor of heat and the medium is not moving. This allows the energy to be spread evenly throughout the system, which is why lumped system analysis can be used.

Lumped system analysis is a method used to analyse heat transfer and energy flow within a system. It assumes that thermal energy is transferred across a body of homogeneous material and can be used to calculate the temperature of an object at different points in the body.

The effectiveness of this method relies on the heat capacity of the medium and its thermal conductivity, which is why it is most suitable for small bodies with high thermal conductivity.

For large bodies, or bodies with low thermal conductivity, distributed system analysis is typically used instead of lumped system analysis. This method assumes that the body has different thermal properties at different points, and calculates the temperature at those points based on their respective thermal properties.

For similar questions on thermal conductivity

https://brainly.com/question/29419715

#SPJ11

The Delta t and Delta x between the events E1 and E2 in the frames of A, B, and C, and show that c2 Delta t2 - Delta x2 is the same in all three frames. The Space time interval in all frames is [tex]\frac{144}{25}L^2[/tex].

In the following we will find out the time interval and space interval between the two events E1 and E2 with respective to  A, B and C.

Simultaneously we will find out space time interval in each case and finally show that they are the same.



In the frame of reference of C

The time interval is the time it takes for ( to Cover the contracted length of B.

with respect to C, B will have a relative velocity Ux' = (-5/13)C  (we had already found out it.Only the sign changes)

Then the contrasted length of B with respect to C.

would be L' =  [tex]L\sqrt{1 - \frac{Ux^2}{C^2}} = L\sqrt{1 - \frac{25}{169}}[/tex]

L' = (12/13)L

So dt = L'/un\x' =(12/13)L / (-5/13)C = (12/5)(L/C)

dx =0 as E1, and E2 occurs at the same point with respect to C. Now space time Interval is Cdt^2 = dx^2 =

[tex]C^2 \frac{144}{25}\frac{L^2}{C^2}-0 = \frac{144}{25}L^2[/tex]

The quantity of time between two given instances is referred to as time interval. In other words, it is the amount of time that has surpassed among the beginning and end of the event. it is also called elapsed time. interval of time is measured in special units. every unit describes a one of a kind quantity of time. some units are better appropriate to specific durations of time.

As an instance, if you were baking a cake within the oven, you will select to measure the time in minutes or perhaps in hours. in case you were calculating the time on your birthday from a particular date, you will choose to measure the time in days, weeks, or months (relying on how far away it became).

To learn more about Time interval visit here:

brainly.com/question/28210196

#SPJ4

Answer:

Explanation:

Density is a measure of how much mass is contained in a given volume. It is the amount of matter (mass) in a given space (volume). Density is usually expressed in units of mass per unit of volume, such as kilograms per cubic meter (kg/m³) or grams per milliliter (g/mL).

Volume is the amount of space occupied by an object or substance. It is the measurement of the three-dimensional space occupied by an object, substance, or material. Volume can be measured in different units, such as liters (L), cubic meters (m³), or cubic feet (ft³), depending on the scale of the object being measured.

Answer:

Explanation:

To find the net electric flux through a closed surface, we need to apply Gauss's law:

Phi_E = Q_enclosed / epsilon_0

where Phi_E is the electric flux, Q_enclosed is the net charge enclosed by the closed surface, and epsilon_0 is the electric constant.

Let's consider a spherical closed surface of radius R enclosing the charges. We can divide the surface into two regions: inside and outside the sphere.

For the charges inside the sphere, the net charge enclosed is:

Q_enclosed = +1.00 nC - 3.00 nC = -2.00 nC

Therefore, the electric flux through the inner surface of the sphere is:

Phi_E_inside = Q_enclosed / epsilon_0 = (-2.00 nC) / epsilon_0

For the charge outside the sphere, the net charge enclosed is:

Q_enclosed = +2.00 nC

Therefore, the electric flux through the outer surface of the sphere is:

Phi_E_outside = Q_enclosed / epsilon_0 = (2.00 nC) / epsilon_0

The net electric flux through the closed surface is the sum of the electric flux through the inner and outer surfaces:

Phi_E_net = Phi_E_inside + Phi_E_outside = (-2.00 nC) / epsilon_0 + (2.00 nC) / epsilon_0

= 0

Therefore, the net electric flux through the closed surface is zero. This means that the total amount of electric field lines entering the surface is equal to the total amount of electric field lines leaving the surface. This result is consistent with Gauss's law, which states that the net electric flux through a closed surface is proportional to the net charge enclosed by the surface. In this case, since the net charge enclosed is zero, the net electric flux is also zero.

Using the triangle of forces to get the system of the forces;

If three forces acting on a body are in equilibrium, then they can be represented in magnitude and direction by the three sides of a triangle taken in order.

In other words, the three forces can be drawn as vectors, and these vectors can be arranged to form a closed triangle.

We know that we have the other end of the triangle to be;

100 Kg * 10 m/s^2 = 1000 N

The missing angle is;

180 - (30 + 60)

= 90 degrees

Thus;

1000/Sin 90 = T1/Sin 60

T1 = 100 Sin 60/Sin 90

T1 = 866/1

T1 = 866 N

1000/Sin 90 = T2/Sin 30

T2 = 1000 Sin 30/Sin 90

T2 = 500 N

Learn more about forces:https://brainly.com/question/13191643

#SPJ1

Answer:

P1 = 45,174 Pa

P2 = 90,348 Pa

W = 2,259 J

Q = 2,259 J

ΔS = 0

Explanation:

We can use the ideal gas law, PV = nRT, to solve this problem. Since the gas is at constant temperature (isothermal), we can simplify this to PV = constant.

Given that there are two moles of oxygen gas in a volume of 0.1 m^3 at 273 K, we can calculate the initial pressure as follows:

P1V1 = nRT

P1 = nRT/V1

P1 = (2 mol)(8.31 J/mol.K)(273 K)/(0.1 m^3)

P1 = 45,174 Pa

Next, we compress the gas reversibly to half of its original volume (i.e. V2 = 0.05 m^3) at constant pressure. We can use the same equation, PV = constant, and the fact that the pressure is constant to solve for the final pressure:

P1V1 = P2V2

P2 = P1V1/V2

P2 = (45,174 Pa)(0.1 m^3)/(0.05 m^3)

P2 = 90,348 Pa

Now, we can calculate the work done during the compression process using the equation:

W = -PΔV

where ΔV is the change in volume (i.e. V2 - V1 = -0.05 m^3), and the negative sign indicates that work is done on the system during compression. Substituting the values, we get:

W = -(45,174 Pa)(-0.05 m^3)

W = 2,259 J

Finally, we can calculate the heat added to the system using the first law of thermodynamics:

ΔU = Q - W

where ΔU is the change in internal energy (which is zero since the temperature is constant), Q is the heat added to the system, and W is the work done on the system (which is negative). Solving for Q, we get:

Q = ΔU + W

Q = 0 J + 2,259 J

Q = 2,259 J

Since the temperature is constant, the heat added to the system is equal to the change in enthalpy:

ΔH = Q = 2,259 J

We can also calculate the change in entropy using the equation:

ΔS = nCv ln(T2/T1)

where Cv is the molar heat capacity at constant volume (which is given as 22.1 J/K.mol), and ln(T2/T1) is the natural logarithm of the ratio of final and initial temperatures. Since the temperature is constant, ΔS = 0.

Therefore, the final answers are:

P1 = 45,174 Pa

P2 = 90,348 Pa

W = 2,259 J

Q = 2,259 J

ΔS = 0

The time that was taken for the movement of the item is observed as 3 seconds.

The equations of motion describe the motion of objects in terms of their position, velocity, acceleration, and time.

For the equation;

v = u + at

This equation relates the final velocity (v) of an object to its initial velocity (u), acceleration (a), and time (t). If three of these variables are known, the equation can be rearranged to solve for the unknown variable.

We know that;

v = u - gt

We know that the object would come to rest after being thrown.

0 = 30 - 10t

-30 = - 10t

t = 3 seconds

Learn more about equations of motion:https://brainly.com/question/29278163

#SPJ1

Newton's second law of motion is the fundamental law of motion in classical mechanics.

The data points will fall along a line. This shows that as the force increases, the acceleration increases.

A group of students conduct an experiment to study Newton's second law of motion. They applied a force to a toy car and measure its acceleration.

The Force (N) and Acceleration (m/s²) measurement of the group of students, as seen in the table, is given as 2.0 and 5.0, 3.0 and 7.5, and 6.0 and 15.0 respectively.

As the group of students will graph the data points, they will be able to conclude that the data points will fall along a line. This shows that as the force increases, the acceleration increases.

The law is also known as the force law, and it is a fundamental principle of classical mechanics. It defines the relationship between an object's motion and the forces acting upon it.

for such more question on fundamental law

https://brainly.com/question/18805035

#SPJ11

Answer:

False. Adult brains are capable of neurogenesis, which is the process of generating new neurons (nerve cells) in the brain. Although it was previously believed that neurogenesis only occurred during early development, research has shown that certain regions of the brain, such as the hippocampus, continue to produce new neurons throughout adulthood. However, the rate of neurogenesis in adults is much lower than in developing brains

EX :SOMEONE FATHER TODAY YOUR FATHER DOES,T KNOW ABOUT TECH OR ANY SAMRT APPS BUT HE KNOW BETTER N HIS GENRATON

The potential difference across C4 can be found using the equation V = V4 - V3. Using the given values, V = 12.0V, C1 = 3.0 ?F, C2 = 2.0 ?F, C3 = 2.0 ?F, C4 = 1.0 ?F, and C5 = 4.0 ?F, we can solve for V4.

V4 = 12.0V + (3.0 ?F + 2.0 ?F + 2.0 ?F + 1.0 ?F) / (1.0 ?F + 4.0 ?F)
V4 = 12.0V + (8.0 ?F / 5.0 ?F)
V4 = 12.0V + 1.6V
V4 = 13.6V
Therefore, the potential difference across C4 is 13.6V - 12.0V = 1.6V.
The potential difference across C4 can be determined using the formula Q = CV. Where Q represents the charge stored in the capacitor, C represents capacitance, and V represents the potential difference across the capacitorTo determine the potential difference across C4, we can use the formula Q = CV. To determine Q, we need to determine the equivalent capacitance of the circuit.

The equivalent capacitance of capacitors in parallel is equal to the sum of their capacitance. The equivalent capacitance of capacitors in series is equal to the reciprocal of the sum of their reciprocals.C1, C2, and C3 are in series, and their equivalent capacitance is given by:C_eq1=1/((1/C1)+(1/C2)+(1/C3))=1/(1/3+1/2+1/2)=3/7 μF{C_eq1=1/((1/C1)+(1/C2)+(1/C3))=1/(1/3+1/2+1/2)=3/7μF}C_eq2 is the equivalent capacitance of C4 and C5 in parallel.C_eq2=C4+C5=1+4=5μF {C_eq2=C4+C5=1+4=5μF}

Now we can determine the equivalent capacitance of the entire circuit.C_eq=C_eq1+C_eq2=3/7+5=38/7μF{C_eq=C_eq1+C_eq2=3/7+5=38/7μF}Now, we can determine the charge stored in the circuit.Q=C_eqV=38/7*12= 65.14μC{Q=C_eqV=38/7*12=65.14μC}To determine the potential difference across C4, we can use the formula Q = CV.V=C4Q/C4= 65.14/1 = 65.14V{V=C4Q/C4=65.14/1=65.14V}Therefore, the potential difference across C4 is 65.14 V.

For more such questions on potential difference

https://brainly.com/question/3535763

#SPJ11

Answer:

Explanation:

Distance is the total length of the path taken from point A to B (the total distance of the whole curvy train route).

Displacement is the straight-line distance from the start point to the end point.  Draw a straight line from A to B, then measure it in exact cm.  Multiply your measurement in cm by 5 to get the answer in km.

Answer:

Explanation:

Planetary Flyby:

The spacecraft does not go into orbit around the planet; instead, it uses the planet's gravity to change its speed and direction.

The spacecraft's closest approach to the planet is usually brief, ranging from a few minutes to a few hours.

The spacecraft is able to capture images and data during the brief encounter with the planet.

The spacecraft's trajectory can be adjusted to perform multiple flybys of different planets or moons.

The spacecraft does not require a large amount of fuel to perform a flyby, making it a cost-effective option for exploration.

Flybys are useful for studying a planet's atmosphere, magnetic field, and gravitational field.

Planetary Orbit Insertion:

The spacecraft goes into orbit around the planet, allowing for long-term study and data collection.

The spacecraft's orbit can be adjusted to achieve different scientific objectives, such as mapping the planet's surface or studying its atmosphere.

The spacecraft must have enough fuel to slow down and enter orbit, making it a more expensive option than a flyby.

The spacecraft's orbit can be stable or elliptical, depending on the scientific objectives and mission requirements.

The spacecraft may require several trajectory adjustments to achieve the desired orbit.

Orbit insertion allows for more detailed and comprehensive study of a planet's geology, climate, and magnetic field.

For the event to occur, Aircraft B will have travelled a distance of 980 NM.

Since Aircraft A is flying East, we can assume that the positive direction is to the East and negative direction is to the West. Let's assume that the position of Aircraft A is x and position of Aircraft B is x + 210 NM.

Let t be the time it takes for Aircraft A to catch up with Aircraft B. At that moment, both aircraft will be at the same position, so:

distance traveled by Aircraft A = distance traveled by Aircraft B

Ground speed x time = Ground speed x time + 210

Using the given ground speeds, we can set up the equation as:

340t = 280t + 210

60t = 210

t = 3.5 hours

Therefore, Aircraft B will have traveled a distance of:

distance = ground speed x time

distance = 280 kt x 3.5 hr

distance = 980 NM

So, Aircraft B will have traveled 980 NM when Aircraft A catches up with it at Point X.

Find out more on Aircraft here: https://brainly.com/question/31362675

#SPJ1

The theoretical efficiency of a Diesel engine with a compression ratio of 18 and a cutoff ratio of 2 is 0.94.

The efficiency of the Diesel cycle, denoted by η, can be expressed as a function of the compression ratio (r)
and the cutoff ratio (r_c)
as follows:
[tex]η = 1 - 1/(r^(r_c-1))[/tex]
This equation shows that as the compression ratio increases, the efficiency of the Diesel cycle increases.
When comparing the efficiency of the Diesel cycle to that of the Otto cycle, it can be seen that for a given compression ratio, the Diesel cycle is less efficient than the Otto cycle. To evaluate the theoretical efficiency of a Diesel engine with a compression ratio of 18 and a cutoff ratio of 2, we can use the equation above to calculate the efficiency as:
[tex]η = 1 - 1/(18^(2-1))[/tex]
η = 1 - 1/18
η = 0.94
Therefore, the theoretical efficiency of a Diesel engine with a compression ratio of 18 and a cutoff ratio of 2 is 0.94.

for such more question on theoretical efficiency

https://brainly.com/question/22224978

#SPJ11

The weight of the box is approximately 0.0408 kg.

What is Pressure?

Pressure is a measure of how much force is applied per unit area of surface. It is a scalar quantity and has units of force per unit area. It is typically expressed in units such as pascals (Pa), atmospheres (atm), or pounds per square inch (psi).

We can use the formula:

pressure = force / area

where pressure is given as 200 kPa and area is given as 20 cm^2. Converting cm^2 to m^2:

20 cm^2 = 20 x 10^-4 m^2 = 0.002 m^2

Substituting the values in the formula and solving for force:

200 kPa = force / 0.002 m^2

force = 200 kPa x 0.002 m^2

force = 0.4 kN (kilonewtons)

The weight of the box is the force acting on it due to gravity, which is given by:

weight = mass x gravitational acceleration

Assuming the box is on the Earth's surface, we can use a value of 9.81 m/s^2 for gravitational acceleration. Solving for mass:

mass = weight / gravitational acceleration

mass = 0.4 kN / 9.81 m/s^2

mass = 0.0408 kg (kilograms)

Therefore, the weight of the box is approximately 0.0408 kg.

Learn more about Pressure from given link

https://brainly.com/question/28012687

#SPJ1

When you contact anything hot, the heat is transmitted from the object to your hand, making it feel hot. When you contact something cold, heat is transmitted from your hand to the object, making it feel chilly.

when heated, the molecules of the liquid in the thermometer move faster, causing them to get a little further apart. this results in movement up the thermometer. when cooled, the molecules of the liquid in the thermometer move slower, causing them to get a little closer together.

When the liquid in the thermometer is heated, the molecules move quicker, forcing them to move wider apart. This causes the thermometer to rise. When the liquid in the thermometer is chilled, the molecules travel slower, leading them to get closer together.

Learn more about heat

https://brainly.com/question/1429452

#SPJ1

the given values, we get va = sqrt((350 kg * 9.81 m/s² - 0)))

Since the cable is inextensible, the distance moved by both blocks is the same.

Let's denote the distance moved by both blocks as "d". Then, the distance moved by block A is "1m + d" to the right.

Using conservation of energy, we can write:

(1/2) * ma * va² + (1/2) * mb * vb²= (ma + mb) * g * d

where ma and mb are the masses of blocks A and B, va and vb are their velocities, and g is the acceleration due to gravity.

Since the system is released from rest, va = 0, and we can solve for vb:

(1/2) * mb * vb²= (ma + mb) * g * d

vb²= 2 * (ma + mb) * g * d / mb

vb = sqrt(2 * (ma + mb) * g * d / mb)

Now, we need to find the velocity of block A after it has moved 1m + d to the right. To do this, we can use the equations of motion. Since block A is moving to the right, we take the positive x direction to be to the right. Then, we have:

ma * a = T - fa

where a is the acceleration of block A, T is the tension in the cable, and fa is the frictional force acting on block A due to the incline.

The tension in the cable is the same throughout, so we can write:

T = mb * g

The frictional force fa can be calculated using:

fa = µ * ma * g * cos(theta)

where µ is the coefficient of friction, theta is the angle of the incline, and cos(theta) = 1/sqrt(2) since the incline makes a 45 degree angle with the horizontal.

Substituting these values, we get:

ma * a = mb * g - µ * ma * g / sqrt(2)

Solving for a, we get:

a = (mb * g - µ * ma * g / sqrt(2)) / ma

Now, we can use the equations of motion again to find the final velocity of block A after it has moved 1m + d to the right. We have:

d = (1/2) * a * t²

where t is the time taken by block A to move 1m + d to the right.

Substituting the value of a, we get:

d = (1/2) * [(mb * g - µ * ma * g / sqrt(2)) / ma] * t²

Solving for t, we get:

t = sqrt(2 * d * ma / (mb * g - µ * ma * g / sqrt(2)))

Finally, we can use the equations of motion again to find the final velocity of block A. We have:

1m + d = (1/2) * a * t²

Substituting the values of a and t, we get:

1m + d = (1/2) * [(mb * g - µ * ma * g / sqrt(2)) / ma] * [2 * d * ma / (mb * g - µ * ma * g / sqrt(2))]²

Solving for the final velocity of block A, we get:

va = sqrt((mb * g - µ * ma * g / sqrt(2)) / ma * (1m + d) / 2)

Substituting the given values, we get:

va = sqrt((350 kg * 9.81 m/s² - 0

To know more about velocity visit :-

https://brainly.com/question/80295

#SPJ1

PE is the potential energy stored in the spring, k is the spring constant, and x is the  PE is the potential energy stored in the spring, k is the spring constant, and x is the displacement from equilibrium.

Displacement is a vector quantity that describes the overall change in position of an object from its initial position to its final position. It is a vector because it has both magnitude (the distance between the initial and final positions) and direction (the direction from the initial position to the final position).

For example, if an object moves from point A to point B, its displacement is the vector that points from A to B, regardless of the path taken to get there. Displacement can be positive, negative, or zero, depending on the direction of the vector.

Displacement is often used in kinematics, which is the study of motion without considering the forces that cause the motion. It is a key concept in describing the motion of objects in one, two, or three dimensions.

To know more about  displacement visit :

https://brainly.com/question/30087445

#SPJ1

If pulse 1 is reflected from a wall, pattern 2 would represent the reflected pulse. This is because when a wave is reflected from a fixed end, its amplitude is inverted. So, pattern 2 represents the reflection of pulse 1 from a fixed end.

A pulse is a short burst of energy that travels through space or matter. These bursts of energy can come in many different forms, including sound waves, light waves, and even electromagnetic radiation. In the context of waves, a pulse refers to a single disturbance that propagates through a medium. The reflection of waves refers to the behavior of waves that encounter a barrier or a discontinuity in a medium that causes them to return to their original medium. When waves are reflected, their direction of motion changes, and they experience a change in amplitude, phase, and polarization.

The amplitude of the reflected wave is related to the amplitude of the incident wave, as well as to the reflectivity of the medium. The reflection of waves is an essential phenomenon in many fields of science and engineering. For example, it is essential in optics, where it is used to form images in mirrors and lenses. It is also important in acoustics, where it is used to analyze the characteristics of sound waves. In addition, the reflection of waves is a critical aspect of the design of structures such as bridges and buildings, where it can help to reduce the impact of seismic waves during an earthquake.

To learn more about Amplitude ;

https://brainly.com/question/3613222

#SPJ11

A. The hockey puck moved at a constant speed away from Janine.

The hockey puck is in equilibrium as a result of moving at a steady pace. Dynamic equilibrium is the name given to this form of equilibrium. Hence, if the hockey puck is moving over the ice at a constant pace, it is in equilibrium.

There is no connection between velocity and speed; velocity is the direction that an object moves in. Velocity is the combination of speed and direction. Speed and velocity are very similar to each other.

The sum of the forces exerted on an object must be zero since, in accordance with Newton's first law of motion, an object moving at a constant speed experiences no net external force.

To know more about the hockey puck visit:

https://brainly.com/question/11488312

#SPJ1

m=55.0 D=820 so were are looking for the velocity ? v= m\d V = 55.0*820 =45100 ...