Which of the following is designed to help an organization continue to operate during and after a disruption?
a. incident response plan
b. business continuity plan
c. disaster recovery plan
d. risk mitigation plan

Answer:

Answered below

Explanation:

A macro or macroinstruction is a programmable pattern which translates a sequence of inputs into output. It is a rule that specifies how a certain input sequence is mapped to a replacement output sequence. Macros makes tasks less repetitive by representing complicated keystrokes, mouse clicks and commands.

By thoroughly testing a macro before deployment, you are able to observe the flow of the macro and also see the result of each action that occurs. This helps to isolate any action that causes an error or produces unwanted results and enable it to be consistent across end user platforms.

Answer:

Using the terminal in linux OS to configure a static ip address, gateway and subnet mask.

Explanation:

-Enter the terminal in the linux environment and use the ifconfig eth0 or -a to bring up the main network interface and other network interfaces.

- for static network configuration, use;

  - ifconfig eth0 10.254.1.42  

  - ifconfig eth0 netmask 255.255.0.0

  - ifconfig eth0 broadcast 10.254.255.255

- and add a default gateway with;

 -  route add default gw 10.254.0.1  eth0.

- Now verify the settings with the ifconfig eth0 command.

Answer:

An operating system (OS) is a software which is responsible for the management of computer hardware, software, and also provides common services for computer programs.

Operating System is pivotal in teaching and learning because:

1. It enables computer programs to run smoothly on various computer devices.

2. The Operating System gives teachers the opportunity to install learning apps on their devices for ease of teaching.

3. It enables students to download and install learning applications, download and upload assignments, etc.

4. The Operating System makes video conferencing for online tuition easy and smooth.

5. It makes computer users to interact with other applications and softwares within a device.

Operating systems are found on many computer devices e.g: mobile phones, video games, PCs, supercomputers, etc.

Answer:

B. UDP 67

C. UDP 68

Explanation:

In this scenario, after a new firewall is installed, users report that they do not have connectivity to the Internet. The output of the ipconfig command shows an IP address of 169.254.0.101. The ports that would need to be opened on the firewall to allow the users to obtain an IP address are both the UDP 67 and UDP 68. UDP is an acronym for user datagram protocol in computer networking and it is part of the transmission control protocol/internet protocol (TCP/IP) suite.

Generally, the standard Internet communications protocols which allow digital computers to transfer (prepare and forward) data over long distances is the TCP/IP suite.

Also, the UDP 67 and 68 ports is responsible for the connectionless framework which is typically being used by the dynamic host configuration protocol (DHCP) that is used to assign IP addresses to various computer users and manage their leases.

UDP 67 is the destination port for a DHCP server while the UDP 68 is the port number for the computer user (client).

Hence, for the users to have access to the internet or internet connectivity both UDP 67 and 68 must be opened on the firewall.

Answer:

An Operating System is pivotal in teaching and learning because:

1. It enables computer users to communicate with the hardware.

2. To run any computer programme successfully, the Operating System is basic.

3. It provides a smooth interface for teachers to use video conferencing or other conferencing systems in teaching their students.

4. The OS enables the launching of other learning packages on a computer system.

5. Students can install learning apps on their systems with the help of the OS.

Explanation:

An Operating System is a software which brings about easy communication with the hardware and enablea other programs to run on the computer easily. It provides basic functionality in systems were they are installed.

Answer:

In dynamic scoping the current block is searched by the compiler and then all calling functions consecutively e.g. if a function a() calls a separately defined function b() then b() does have access to the local variables of a(). The visible variables with the name of the function in which it was defined are given below.

Explanation:

In main() function three integer type variables are declared: a,b,c

In fun1() three int type variables are declared/defined: b,c,d

In fun2() three int type variables are declared/defined: c,d,e

In fun3() three int type variables are declared/defined: d,e,f

a. Main calls fun1; fun1 calls fun2; fun2 calls fun3

Here the main() calls fun1() which calls fun2() and fun2() calls func3() . This means first the func3() executes, then fun2(), then fun1() and last main()

Visible Variable:  d, e, f        Defined in: fun3

Visible Variable: c                 Defined in: fun2 (the variables d and e of fun2  

                                                                                                     are not visible)

Visible Variable: b                  Defined in: fun1 ( c and d of func1 are hidden)

Visible Variable: a                 Defined in: main (b,c are hidden)

b. Main calls fun1; fun1 calls fun3

Here the main() calls fun1, fun1 calls fun3. This means the body of fun3 executes first, then of fun1 and then in last, of main()

Visible Variable: d, e, f           Defined in: fun3

Visible Variable:  b, c              Defined in: fun1 (d not visible)

Visible Variable:  a                  Defined in: main ( b and c not visible)

c. Main calls fun2; fun2 calls fun3; fun3 calls fun1

Here the main() calls fun2, fun2 calls fun3 and fun3 calls fun1. This means the body of fun1 executes first, then of fun3, then fun2 and in last, of main()

Visible Variable:  b, c, d        Defined in: fun1

Visible Variable:  e, f             Defined in: fun3 ( d not visible)

Visible Variable:  a                Defined in: main ( b and c not visible)

Here variables c, d and e of fun2 are not visible

d. Main calls fun3; fun3 calls fun1

Here the main() calls fun3, fun3 calls fun1. This means the body of fun1 executes first, then of fun3 and then in last, of main()

Visible Variable: b, c, d     Defined in: fun1  

Visible Variable:   e, f        Defined in:  fun3   ( d not visible )

Visible Variable:    a          Defined in: main (b and c not visible)

e. Main calls fun1; fun1 calls fun3; fun3 calls fun2

Here the main() calls fun1, fun1 calls fun3 and fun3 calls fun2. This means the body of fun2 executes first, then of fun3, then of fun1 and then in last, of main()

Visible Variable: c, d, e        Defined in: fun2

Visible Variable:  f               Defined in: fun3 ( d and e not visible)

Visible Variable:  b               Defined in:  fun1 ( c and d not visible)

Visible Variable: a                Defined in: main ( b and c not visible)

f. Main calls fun3; fun3 calls fun2; fun2 calls fun1

Here the main() calls fun3, fun3 calls fun2 and fun2 calls fun1. This means the body of fun1 executes first, then of fun2, then of fun3 and then in last, of main()

Visible Variable: b, c, d       Defined in: fun1  

Visible Variable: e               Defined in: fun2  

Visible Variable: f                Defined in: fun3  

Visible Variable: a               Defined in: main

Answer:

The programming language is not stated;

However, the program written in Python is as follows

def solveEquation(x,y,z):

     result = z - y + 2 * x

     print(result)

x = float(input("x = "))

y = float(input("y = "))

z = float(input("z = "))

print(solveEquation(x,y,z))

Explanation:

This line defines the function solveEquation

def solveEquation(x,y,z):

This line calculates the expression in the question

     result = z - y + 2 * x

This line returns the result of the above expression

     print(result)

The next three lines prompts user for x, y and z

x = float(input("x = "))

y = float(input("y = "))

z = float(input("z = "))

This line prints the result of the expression

print(solveEquation(x,y,z))

Answer:

Enable SSID broadcast

Explanation:

All of the following are extra precautions you can take to secure a wireless network except enable SSID broadcast. The correct option is B.

When people in the area try to join their wireless devices, the name of your network is listed in the list of available networks thanks to broadcasting the SSID.

You can stop SSID broadcasting if you don't want arbitrary wireless devices attempting to connect to your network.

Home networks don't need to have a visible SSID unless they have many access points that devices can switch between.

If your network just has a single router, disabling this function means giving up the ease of adding new home network customers in exchange for certain security gains.

Apart from enabling SSID broadcast, there are other security measures you may take to protect a wireless network.

Thus, the correct option is B.

For more details regarding SSID broadcast, visit:

https://brainly.com/question/13191413

#SPJ6

Answer:

b. obA.c 5;

d. ClassA.b=23;

f. ClassA.d = 99;

Explanation:

Java is a programming language for object oriented programs. It is high level programming language developed by Sun Microsystems. Java is used to create applications that can run on single computer. Static variable act as global variable in Java and can be shared among all objects. The non static variable is specific to instance object in which it is created.

Answer:

The generator function using yield from:

def scale(s, k):

   yield from map(lambda x: x * k, s)

Another way to implement generator function that works same as above using only yield:

def scale(s, k):

  for i in s:

       yield i * k

Explanation:

The complete program is:

def scale(s, k):

   """Yield elements of the iterable s scaled by a number k.  

   >>> s = scale([1, 5, 2], 5)

   >>> type(s)

   <class 'generator'>

   >>> list(s)

   [5, 25, 10]  

   >>> m = scale(naturals(), 2)

   >>> [next(m) for _ in range(5)]

   [2, 4, 6, 8, 10]

   """

   yield from map(lambda x: x * k, s)

If you want to see the working of the above generator function scale() as per mentioned in the above comments, use the following statements :

s = scale([1, 5, 2], 5)  

print(type(s))  

#The above print statement outputs:

#<class 'generator'>

print(list(s))

#The above print statement outputs a list s with following items:

#[5, 25, 10]                                                                                                                    

The function def scale(s, k): is

def scale(s, k):

   yield from map(lambda x: x * k, s)    

This function takes two parameters i.e. s and k and this function yields elements of the given iterable s, scaled by k.

In this statement:    yield from map(lambda x: x * k, s)    

yield from is used which allows to refactor a generator in a simple way by splitting up generator into multiple generators.

The yield from is used inside the body of a generator function.

The lambda function is a function that has any number of arguments but can only have one expression. This expression is evaluated to an iterable from which an iterator will be extracted. This iterator yields and receives values to or from the caller of the generator. Here the expression is x: x * k and iterable is s. This expression multiplies each item to k.

map() method applies the defined function for each time in an iterable.

The generator function can also be defined as:

def scale(s, k):

  for i in s:

       yield i * k

For the above example

s = scale([1, 5, 2], 5)  

def scale(s,k): works as follows:

s = [1, 5, 2]

k = 5

for loop iterates for each item i in iterable s and yields i*k

i*k multiplies each element i.e 1,5 and 2 to k=5 and returns a list

At first iteration, for example, i*k = 1 * 5 = 5, next iteration i*k = 5*5 = 25 and last iteration i*k = 2*5 = 10. So the output. So

s = scale([1, 5, 2], 5)  In this statement now s contains 5, 25 and 10

print(list(s))  prints the values of s in a list as: [5, 25, 10] So output is:

[5, 25, 10]

Answer:

a. There are improvements in security and high availability during outage

Explanation:

Virtualization occurs when data that could be in several formats (for example, storage devices) are made to appear real through a software. There are virtualization providers who act as third-party between users and the original manufacturers of the software. While virtualization has received wide popularity in recent times because of the several advantages it offers of which cost-saving is included, it also has some disadvantages. One of them from the options provided is the possibility of a security breach and its uncertain availability.

The security breach arises because of the proliferation of information on the virtual space. This information can be accessed by unauthorized hackers. Also since third-party providers are the usual providers of virtualization services, the availability depends on them because if they shut down, users can no longer access the software.

Answer:

A) for 100 : < 1 times

b) for 750 : < 1 times

c) For 2000 = 1 time

D) for  10000 = 4 times

E) for  100000 = 7 times

Explanation:

Given data:

load factor = 75%

initial capacity = 1000

The number of times the enlarge method will be called for a unique number of entries  would be 2 times the initial capacity ( 1000 ) because the load factor = 75% = 0.75

A) for 100 : < 1 times

b) for 750 : < 1 times

C) For 2000

= initial capacity * 2  = 2000   ( 1 time )

D) for 10000

= 1000 * 2 *2 *2*2 = 16000 ( 4 times )

to make it 10000 we have to add another 2000 which will make the number of times = 4 times

E)for  100000

= 1000*2*2*2*2*2*2*2= 128000 ( 7 times )

unique entry of 100000 is contained in 7 times

Answer:

Following are the algorithm to this question:

Explanation:

In the RSA algorithm can be defined as follows:  

In this algorithm, we select two separate prime numbers that are the "P and Q", To protection purposes, both p and q combines are supposed to become dynamically chosen but must be similar in scale but 'unique in length' so render it easier to influence. Its value can be found by the main analysis effectively.  

Computing N = PQ.  

In this, N can be used for key pair, that is public and private together as the unit and the Length was its key length, normally is spoken bits. Measure,

[tex]\lambda (N) = \ lcm( \lambda (P), \lambda (Q)) = \ lcm(P- 1, Q - 1)[/tex]  where [tex]\lambda[/tex] is the total function of Carmichaels. It is a privately held value. Selecting the integer E to be relatively prime from [tex]1<E < \lambda (N)[/tex]and [tex]gcd(E, \lambda (N) ) = 1;[/tex] that is [tex]E \ \ and \ \ \lambda (N)[/tex].  D was its complex number equivalent to E (modulo [tex]\lambda (N)[/tex] ); that is d was its design multiplicative equivalent of E-1.  

It's more evident as a fix for d provided of DE ≡ 1 (modulo [tex]\lambda (N)[/tex] ).E with an automatic warning latitude or little mass of bigging contribute most frequently to 216 + 1 = 65,537 more qualified encrypted data.

In some situations it's was shown that far lower E values (such as 3) are less stable.  

E is eligible as a supporter of the public key.  

D is retained as the personal supporter of its key.  

Its digital signature was its module N and the assistance for the community (or authentication). Its secret key includes that modulus N and coded (or decoding) sponsor D, that must be kept private. P, Q, and [tex]\lambda (N)[/tex] will also be confined as they can be used in measuring D. The Euler totient operates [tex]\varphi (N) = (P-1)(Q - 1)[/tex] however, could even, as mentioned throughout the initial RSA paper, have been used to compute the private exponent D rather than λ(N).

It applies because [tex]\varphi (N)[/tex], which can always be split into  [tex]\lambda (N)[/tex], and thus any D satisfying DE ≡ 1, it can also satisfy (mod  [tex]\lambda (N)[/tex]). It works because [tex]\varphi (N)[/tex], will always be divided by [tex]\varphi (N)[/tex],. That d issue, in this case, measurement provides a result which is larger than necessary (i.e. D >   [tex]\lambda (N)[/tex] ) for time - to - time). Many RSA frameworks assume notation are generated either by methodology, however, some concepts like fips, 186-4, may demand that D<   [tex]\lambda (N)[/tex]. if they use a private follower D, rather than by streamlined decoding method mostly based on a china rest theorem. Every sensitive "over-sized" exponential which does not cooperate may always be reduced to a shorter corresponding exponential by modulo  [tex]\lambda (N)[/tex].

As there are common threads (P− 1) and (Q – 1) which are present throughout the [tex]N-1 = PQ-1 = (P -1)(Q - 1)+ (P-1) + (Q- 1))[/tex], it's also possible, if there are any, for all the common factors [tex](P -1) \ \ \ and \ \ (Q - 1)[/tex]to become very small, if necessary.  

Indication: Its original writers of RSA articles conduct their main age range by choosing E as a modular D-reverse (module [tex]\varphi (N)[/tex]) multiplying. Because a low value (e.g. 65,537) is beneficial for E to improve the testing purpose, existing RSA implementation, such as PKCS#1, rather use E and compute D.

Answer:

1.024x10^-5

Explanation:

To calculate the transmission delay bytes for the token,

we have the token to be = 64bytes and 10mbps rate.

The transmission delay = 64bytes/10mbps

= 51.2 microseconds

A microsecond is a millionth of a second.

= 5.12 x 10^-5

The question says the average number of stations that the token will pass through is 20. Remember this value is gotten from 40/2

20 x 5.12 x 10^-5

= 0.001024

= 1.024x10^-5

Therefore on an idle network with 40 stations, the average wait is

= 1.024x10^-5

Answer:

The correct answer is D

In the case of printing pages when you are not sure of the number of the page the printer will print you should leave some gaps or margins or leave space between the two pages.

Learn more bout the might be considered "old-school,".

brainly.com/question/26057812.

Answer:

def pyramid_volume(base_length,base_width,pyramid_height):

      return base_length * base_width * pyramid_height/3

length = float(input("Length: "))

width = float(input("Width: "))

height = float(input("Height: "))

print("{:.2f}".format(pyramid_volume(length,width,height)))

Explanation:

This line declares the function along with the three parameters

def pyramid_volume(base_length,base_width,pyramid_height):

This line returns the volume of the pyramid

      return base_length * base_width * pyramid_height/3

The main starts here

The next three lines gets user inputs for length, width and height

length = float(input("Length: "))

width = float(input("Width: "))

height = float(input("Height: "))

This line returns the volume of the pyramid in 2 decimal places

print("{:.2f}".format(pyramid_volume(length,width,height)))

Answer:

The program written in Java is as follows

import java.util.Scanner;

public class mutilate {

public static void main(String [] args) {

Scanner input = new Scanner(System.in);

int n;

System.out.print("Array Length: ");

n = input.nextInt();

while(n<1 || n > 103)  {

    System.out.print("Array Length: ");

n = input.nextInt();

}

int a []= new int [n];

int b []= new int [n];

System.out.print("Enter Elements of the Array: ");

for(int i =0;i<n;i++)  {

 a[i] = input.nextInt();

}

System.out.print("Output: ");

for(int i =0;i<n;i++)  {

 if(i == 0)   {

     b[i] = 0+a[i]+a[i+1];

 }

 else if(i == n-1)   {

     b[i] = a[i - 1]+a[i]+0;

 }

 else   {

 b[i] = a[i - 1]+a[i]+a[i+1];    

 }

 System.out.print(b[i]+" ");

}

}

}

Explanation:

This line allows the program accepts user input

Scanner input = new Scanner(System.in);

This line declares integer n

int n;

The next two line prompts user for length of the array and also accepts input

System.out.print("Array Length: ");

n = input.nextInt();

The following while iteration ensures that the user input is between 1 and 103

while(n<1 || n > 103)  {

    System.out.print("Array Length: ");

n = input.nextInt();

}

The next two lines declares array a and b

int a []= new int [n];

int b []= new int [n];

The next for iteration allows user enter values for array a

System.out.print("Enter Elements of the Array: ");

for(int i =0;i<n;i++)  {

 a[i] = input.nextInt();

}

The next for iteration calculates and prints the values for array b based on the instruction in the question

System.out.print("Output: ");

for(int i =0;i<n;i++)  {

 if(i == 0)   {

     b[i] = 0+a[i]+a[i+1];

 }

 else if(i == n-1)   {

     b[i] = a[i - 1]+a[i]+0;

 }

 else   {

 b[i] = a[i - 1]+a[i]+a[i+1];    

 }

 System.out.print(b[i]+" ");

}

Answer:

The correct answer will be "Man-in-the-browser".

Explanation:

Why MUST you request your DSO signed I-20 ship as soon as it is ready and who is responsible to request the I-20?

a. It is required you have an endorsed/signed I-20 when Customs and Border Patrol or police ask for it

b. We only keep an unsigned digital copy and cannot sign an I-20 after the fact

c. It is against U.S. regulations to send digital (signed or not) DS-2019s and must treat I-20s the same

d. You will need all signed original I-20s to make copies to apply for OPT, STEM and H-1B in the future, so get them now!

e. It is the student’s choice to request each term, however, we cannot go back retroactively to provide past copies

f. We can only provide a signed copy of current I-20 and if changes occur from previous semesters that information will not show

g. The original endorsed I-20 signed by a DSO will be destroyed after 30 days of issuance if not picked up, and it cannot be replicated

h. The cost to have I-20 shipped may go up at any time

i. All the above

Answer:

i. All the above

Explanation:

DSO means designated school officials and they have to do with Student and Exchange Visitor Program (SEVP)-certified schools where students have to get a Form I-20, “Certificate of Eligibility for Nonimmigrant Student Status which provides information about the student's F or M status.

What a student must request for from his DSO signed I-20 ship are all the above options.

Answer:

def group_by_nondecreasing( *args ) :

     num_list = [arg for arg in args]

     sorted_numlist = sorted( num_list )

     list_stream = [ sorted_numlist, sorted_numlist, sorted_numlist ]

     return list_stream

Explanation:

This python function has the ability to accept multiple and varying amount of arguments. the list comprehension shorten the logical for statement to generate a list of numbers, sorts the list in ascending order by default and duplicates the list in another list.

Answer:

quality of highest giving page hash no adds

Answer:

num_owls_zooA = 1

num_owls_zooB = 2

num_owls_zooC = 4

num_zoos = 3

avg_owls = 0.0

avg_owls = (num_owls_zooA + num_owls_zooB + num_owls_zooC) / num_zoos

print("Average owls per zoo: " + str(int(avg_owls)))

Explanation:

Initialize the num_owls_zooA, num_owls_zooB, num_owls_zooC as 1, 2, 4 respectively

Initialize the num_zoos as 3 and avg_owls as 0

Calculate the avg_owls, sum num_owls_zooA, num_owls_zooB, num_owls_zooC and divide the result by num_zoos

Print the avg_owls as an integer (Type cast the avg_owls to integer, int(avg_owls))

Answer:

b. getCost

Explanation:

Javascript is a multi-purpose programming language, used in applications like web development, software development and embedded system programming, data visualization and analysis, etc.

Its regular syntax defines variables with the "var" keyword and with additional ecmascript rules, the "let" and "const" keywords as well. function definition uses the keyword "function" with parenthesis for holding arguments. The code block of a function is written between two curly braces and returns a value stored in a variable with the return keyword.

The variable can now be called with the parenthesis and required arguments. Note that only anonymous functions can assigned to a variable.

Answer:

Here is the Python program:

import keyword  #module that contains list of keywords of python

filename = input("Enter Python source code filename: ") # prompts user to enter the filename of a source code

code = open(filename, "r") # opens the file in read mode

keywords = keyword.kwlist #extract list of all keywords of Python and stored it into keywords

dictionary = dict() #creates a dictionary to store each keyword and its number of occurrence in source code

for statement in code: # iterates through each line of the source code in the file

   statement = statement.strip() # removes the spaces in the statement of source code  

   words = statement.split(" ") #break each statement of the source code into a list of words by empty space separator

   for word in words:# iterates through each word/item of the words list  

       if word in keywords:#checks if word in the code is present in the keywords list of Python  

           if word in dictionary: #checks if word is already present in the dictionary

               dictionary[word] = dictionary[word] + 1 #if word is present in dictionary add one to the count of the existing word

           else: #if word is not already present in the dictionary  

               dictionary[word] = 1 #add the word to the dictionary and set the count of word to 1

for key in list(dictionary.keys()): #iterates through each word in the list of all keys in dictionary  

   print(key, ":", dictionary[key])# prints keyword: occurrences in key:value format of dict

Explanation:

The program is well explained in the comments attached with each line of the program.  

The program prompts the user to enter the name of the file that contains the Python source code. Then the file is opened in read mode using open() method.

Then the keyword.kwlist statement contains the list of all keywords of Python. These are stored in keywords.

Then a dictionary is created which is used to store the words from the source code that are the keywords along with their number of occurrences in the file.

Then source code is split into the lines (statements) and the first for loop iterates through each line and removes the spaces in the statement of source code .

Then the lines are split into a list of words using split() method. The second for loop is used to iterate through each word in the list of words of the source code. Now each word is matched with the list of keywords of Python that is stored in keywords. If a word in the source code of the file is present in the keywords then that word is added to the dictionary and the count of that word is set to 1. If the word is already present in the dictionary. For example if there are 3 "import" keywords in the source code and if 1 of the import keywords is already in the dictionary. So when the second import keyword is found, then the count of that keyword is increased by 1 so that becomes 2.

Then the last loop is used to print each word of the Python that is a keyword along with its number of occurrences in the file.

The program and its output is attached in a screenshot. I have used this program as source code file.

Answer:

A. UC ONE Self-Service Center

Explanation:

The UC ONE Self-Service Center is an online platform where one can get detailed information about registration, classes, finances, and other personal details. This is also the portal where one can check class schedule, bill payment, viewing available courses, checking final grades, book ordering, etc.

it gives students all the convenience required for effective learning experience.

The UC ONE platform is a platform found in the portal of University of the Cumberland.

Answer:

10010100001001010100101101010100000000000000000010100101010101111010001001010010100101001

Explanation:

I'll pick up your question from here:

Define a function print_total_inches, with parameters num_feet and num_inches, that prints the total number of inches. Note: There are 12 inches in a foot.

Sample output with inputs: 5 8

Total inches: 68

Answer:

The program is as follows:

def print_total_inches(num_feet,num_inches):

     print("Total Inches: "+str(12 * num_feet + num_inches))

print_total_inches(5,8)

inches = int(input("Inches: "))

feet = int(input("Feet: "))

print_total_inches(feet,inches)

Explanation:

This line defines the function along with the two parameters

def print_total_inches(num_feet,num_inches):

This line calculates and prints the equivalent number of inches

     print("Total Inches: "+str(12 * num_feet + num_inches))

The main starts here:

This line tests with the original arguments from the question

print_total_inches(5,8)

The next two lines prompts user for input (inches and feet)

inches = int(input("Inches: "))

feet = int(input("Feet: "))

This line prints the equivalent number of inches depending on the user input

print_total_inches(feet,inches)

Answer:

Written in Python:

def print_total_inches(num_feet,num_inches):

    print("Total inches: "+str(12 * num_feet + num_inches))

feet = int(input())

inches = int(input())

print_total_inches(feet, inches)

Explanation:

The quick key to highlighting a column is the Ctrl + Shift + down arrow. Thus, option (b) is correct.

The term column refers to how data is organized vertically from top to bottom. Columns are groups of cells that are arranged vertically and run from top to bottom. A column is a group of cells in a table that are vertically aligned. The column is the used in the excel worksheet.

The quick key for highlighting a column is Ctrl + Shift + down arrow. To select downward, press Ctrl-Shift-Down Arrow. To pick anything, use Ctrl-Shift-Right Arrow, then Ctrl-Shift-Down Arrow. In the Move/Highlight Cells, the was employed. The majority of the time, the excel worksheet was used.

As a result, the quick key to highlighting a column is the Ctrl + Shift + down arrow. Therefore, option (b) is correct.

Learn more about the column, here:

https://brainly.com/question/3642260

#SPJ6

Answer:

its (B) ctrl+shift+down arrow

hope this helps <3

Explanation:

Answer:

SELECT COUNT (DISTICT constraint_name)

FROM apd_schema.constraint_column_usage

RUN

Explanation:

General syntax to return a catalog view of information about foreign keys.

SELECT DISTINCT PARENT_TABLE =

           RIGHT(Replace(DC.constraint_name, 'fkeys_', ''),

           Len(Replace(DC.constraint_name, 'fkeys_', '')) - Charindex('_', Replace(DC.constraint_name, 'fkeys_', ''))),

           CHILD_TABLE = DC.table_name,

           CCU.column_name,

           DC.constraint_name,

           DC.constraint_type

FROM apd_schema.table_constraints DC

INNER JOIN apd_schema.constraint_column_usage CCU

           ON DC.constraint_name = CCU.constraint_name

WHERE  DC.constraint_type LIKE '%foreign'

           OR DC.constraint_type LIKE '%foreign%'

           OR DC.constraint_type LIKE 'foreign%'

RUN

Answer:

See the attached document for answer.

Explanation:

See the attached document for the explanation.