Answer:
D
Explanation:
Answer:
D
Explanation:
Light from other galaxies appears shifted toward the red end of
the spectrum, which shows that the galaxies are moving away
from Earth
how can you say that joule and Newton are derived units
Answer:
F = M a where M is acceleration and a is acceleration
a = x / s^2 = distance / time squared
The Newton is derived because mass, distance, and time are all fundamental units One would have to look at the fundamental requirements for these definitions, but they can all be repeated in a laboratory.
So the Newton is determined from these fundamental units and since the Joule equals Newton * Distance it is also derived from the fundamental units.
If one has the three fundamental units then one can derive the Joule and Newton.
How is the mass defect determined? A. The mass defect is determined by measuring the mass of emitted alpha particles B. The parent nuclear mass is divided by the daughter nuclear mass. C. The mass of a nucleus is subtracted from the mass of its components. OD. The loss of mass of a nucleus is determined by looking at its line spectrum.
Answer:
C. The mass of a nucleus is subtracted from the mass of its components.
Explanation:
The difference in the mass of a stable nucleus and the combined masses of its constituents (i.e. nucleons) is called “Mass Defect” or “Mass Deficit”. It is denoted by Δm.
Symbolically,
[tex]\Delta m = (Zm_p+Nm_n)-m[/tex]
where,
Δm = mass defect
Z = Atomic Number
[tex]m_p[/tex] = mass of Proton
N = Neutron Number
[tex]m_n[/tex] = mass of Neutron
m = mass of Nucleus
Hence, the correct option is:
C. The mass of a nucleus is subtracted from the mass of its components.
What what is the change in internal energy if 500 joule of heat is added to a system and 125 joule of work are done on a system
Answer:
DU = 375 Joules
Explanation:
Given the following data;
Quantity of heat = 500 Joules
Work done = 125 Joules
To find the change in internal energy;
Mathematically, the change in internal energy of a system is given by the formula;
DU = Q - W
Where;
DU is the change in internal energy.Q is the quantity of energy.W is the work done.Substituting into the formula, we have;
DU = 500 - 125
DU = 375 Joules
what is the meaning of physic
the scientific study of natural forces such as light, sound, heat, electricity, pressure, etc.
Cuộn dây có N = 1000 vòng, mỗi vòng có diện tích S = 20 cm2 đặt trong một từ trường đều. Trục của cuộn dây song song với vectơ cảm ứng từ của từ trường. Cho độ lớn B biến thiên, người ta thấy có suất điện động cảm ứng eC = 10V được tạo ra. Độ biến thiên cảm ứng từ là bao nhiêu trong thời gian ∆t = 10-2 s
What was the role of gravity in the formation of the solar system?
A. Gravity caused the solar system to separate into individual
celestial bodies
B. Gravity caused the solar system to move closer to the Sun.
C. Gravity caused the solar system to compress into one larger
mass
D. Gravity caused the solar system to expand from a central point.
Answer:
Approximately 4.6 billion years ago, the solar system was a cloud of dust and gas known as a solar nebula. Gravity collapsed the material in on itself as it began to spin, forming the sun in the center of the nebula. ... Small particles drew together, bound by the force of gravity, into larger particles.
16 100 g of water at 25 °C is poured into an insulating cup. 50 g of ice at 0 °C is added to the water.
The water is stirred until the temperature of the water has fallen to 0°C.
18 g of ice remains unmelted.
The specific heat capacity of water is 4.2 J /g °C.
Which value does this experiment give for the specific latent heat of fusion of ice?
Answer:
Q = Q
mcT = ml
100 x 4.2 x 25 = (50-18) l
l = 328
*Hope it helps*
The specific latent heat of fusion of the melted ice is 328.13 J/kg.
Conservation of energy
The specific latent heat of fusion of the melted ice is determined by applying the principle of conservation of energy as shown below;
Heat lost by the water = Heat gained by the ice
McΔθ = mL
where;
c is specific heat capacity of waterL is pecific latent heat of fusion of icem is mass of melted ice = 50 g - 18 g = 32 g(100)(4.2)(25) = (32)L
32L = 10500
L = 328.13 J/kg
Thus, the specific latent heat of fusion of the melted ice is 328.13 J/kg.
Learn more about heat capacity here: https://brainly.com/question/16559442
A man is running on the straight road with the uniform velocity of 3m/s. Calculate acceleration.
Answer:
Answer is zero
Explanation:
Acceleration is defined as the rate of change in velocity. If there’s no change in velocity, then the rate of change is zero, hence the acceleration is zero. The question says the man is running at a uniform velocity (i.e. he’s running at a steady speed in a fixed direction). This means his velocity is constant, or unchanging. Hence, his acceleration is zero.
A man is running on the straight road with the uniform velocity of 3 m/s.
To find out:Acceleration produced by the man.
Solution:Given, the man is running with uniform velocity of 3 m/s.So the velocity did not change.It remains constant.We know, acceleration is the change of velocity per unit time.Since there is no change in velocity in this case, so there will be no acceleration.So, the acceleration produced by the man is zero.Answer:The acceleration produced by the man is zero.25)Two forces are acting on a block in opposite directions as shown in the figure above
(a) Calculate the net force acting on the block.
(b) In which direction will the net force tend to move the object?
(c) Will any other force try to oppose the motion of the block?
[tex]\boxed{ \sf{Answer}} [/tex]
____________________
(a) A = 5 kgwt
B = 10 N
First convert 5 kgwt to N,
[tex]5 \times 9.8 \\ = 49 \: N[/tex]
Net force [the forces are acting in 2 opposite directions]
[tex]A - B \: \\ = 49 - 10 \\ = 39 \: N[/tex]
____________________
(b) Since, the force is greater by A ↦the block will move towards B, i.e, to the right.
____________________
(c) Frictional force will try to oppose the motion of the block but since A has greater force than B, the frictional force will be resisted.
____________________
ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ ツ
꧁❣ ʀᴀɪɴʙᴏᴡˢᵃˡᵗ2²2² ࿐
An object is free falling near the surface of the earth. At a certain instant in time, it is falling downward at a rate 25.0 m/s. After 2.5 seconds, what are its acceleration and velocity?
Answers:
acceleration = 9.81 m/s^2velocity = 49.5 m/sThe values are approximate.
==========================================================
Explanation:
When near the surface of the earth, the acceleration of gravity is roughly 9.81 m/s^2. This means that after each second passes, the velocity increases by roughly 9.81 m/s.
After 2.5 seconds, the velocity increases by 2.5*9.81 = 24.525 m/s = 24.5 m/s
If it was already going 25.0 m/s, then it bumps up to 25.0+24.5 = 49.5 m/s which is also approximate.
The acceleration of gravity stays the same when the object is close to the surface of the earth, so it stays at roughly 9.81 m/s^2
Side note: I'm ignoring air resistance (aka air friction or drag) since that greatly complicates things, and we would need to know the shape and surface area of the object. The material type would also be relevant info as well.
ANSWER ASAP PLEASE
why is there repulsion between the North Pole of these two magnets
A . The magnetic fields between the north poles repel each other
B . A new and different magnetic field forms between the two north poles
C . The magnetic fields between the South Poles repel each other
D. North poles repel each other , and south poles attract each other
Explanation:
A the magnetic fields between the north poles repel each other
Explanation:
the correct answer is A
hpoe it help u
A sample of nitrogen gas is inside a sealed container. The volume of the container decreases while the temperature is kept constant. This is a ________ process.
a) isothermal
b) constant-volume
c) adiabatic
d) isobaric
a car traveles a distance of 800m in 40s ， calculate its distance
Answer:
DISTANCE=800M
TIME=40s
Speed=20m/s
Explanation:
Have a nice day
Answer:
the distance is 800m
Explanation:
but i think its velocity
formula = D÷T
now 800m÷40
velocity=20m/s
11 e) Can a conductor be given limitless charge? Obtain the equivalent resistance of several resistors if (a) they are in series, (b) they are in parallel
Answer:
(e) no
(a) Rs = R' + R'' + R'''
(b) 1/Rp = 1/R' + 1/R'' + 1/R'''
Explanation:
11 e)
Practically it is not possible to give limitless charge to a conductor. It depends to the number of valence electrons.
(a) When the three resistances R'. R'' and R''' is in series combination.
Let they are connected to the voltage V and the current in each resistance is I.
According to Ohm's law
Voltage across R', V' = I R'
Voltage across R'', V'' = I R''
Voltage across R''', V''' = I R'''
So, let the equivalent resistance is Rs.
I Rs = I R' + I R'' + I R'''
Rs = R' + R'' + R'''
(b)
When the three resistances R'. R'' and R''' is in parallel combination.
Let they are connected to the voltage V and the current in each resistance is I', I''. I'''.
Current in R', I' = V/R'
Current in R'', I'' = V/R''
Current in R''', I''' = V/R'''
The equivalent resistance is Rp.
V/Rp = V/R' + V/ R'' + V/R'''
1/Rp = 1/R' + 1/R'' + 1/R'''
A 20-N force acts on a 5-kg object at rest. How fast will
the object accelerate on a frictionless surface?
A. 15 m/s^2
B. 25 m/s^2
C. 4 m/s^2
D. 100 m/s^2
Answer:
C.
Explanation:
Force = Mass * Acceleration
So 20 = 5* Acceleration
4 = Acceleration
The acceleration of the object is 4 m/s².
To find the acceleration, the given values are:
Force = 20 N
Mass = 5 kg
Define acceleration.Definition:
As it was given as the values of Force and mass, here acceleration definition depends on the Newton's second law of motion.
Using the second law of motion, the force will be equal to the product of the mass and the acceleration.
As formula,
F = ma Newton
Here, to find acceleration,
a =f/ m
Substituting the values,
= 20 / 5
a = 4m/s².
So, the acceleration was 4 m/s². The Option C is the correct answer.
Learn more about acceleration,
https://brainly.com/question/12550364
#SPJ6
what do you mean by supplementary quantities and its unit?
$ \large\boxed{ \sf \red{More ~Info :}}$
The units of supplementary quantities are dimensionless units.
[tex] \\ [/tex]
What idea did Bohr introduce to atomic models?
a. Electrons travel in fixed orbits.
b. Energy levels in an atom are quantized.
c. Electrons have wave properties.
d. Electrons are found in electron clouds.
The bohr Effect states that the lower the ph,?
Answer:
Explanation:
The Bohr effect describes how low pH (acidity) lowers the affinity of hemoglobin for oxygen, making hemoglobin more likely to offload oxygen in areas of low pH, which for reasons I'll get into, tissues in need of oxygen tend to have.
A research historian is interested in finding a sunken treasure in the Atlantic Ocean. She knows that her equipment is only good enough to recover items that are at a depth of 5 000 m or less. The speed of sound through the water is 1 530 m/s. While working, the sonar equipment detects a reflection that is of interest. The echo from the item takes 6.2 s to return to the sonar detector. Will she be able to retrieve this item?
Yes, she will be able to retrieve the item
An echo is the repetition of sound formed due to the reflection of the sound wave.
From the question, we are given the following;
Speed of sound through water v = 530m/s
The time it takes the echo to reach the sonar detector t = 6.2s
First, we need to know how far the echo can travel using the formula;
2x = vt
x is the distance from the source of the sound to the reflector
v is the speed of sound
t is the time
Substituting the given values into the formula:
[tex]x=\frac{vt}{2}\\x=\frac{530*6.2}{2} \\x=530*3.1\\x= 1643m[/tex]
Since the research historian knows that her equipment is only good enough to recover items that are at a depth of 5 000 m or less and 1643m is less than 5000m, hence she will be able to retrieve the item.
Learn more about echo here: https://brainly.com/question/23127522
The research historian can retrieve the item.
Sound is a form of mechanical waves, which is a kind of waves that needs a medium to propagate itself and whose kinematic is representative of motion at constant speed. The maximum echo time ([tex]t_{e}[/tex]), in seconds, is the distance travelled by waves ([tex]s[/tex]), in meters, divided by velocity of sound through the medium ([tex]v_{s}[/tex]), in meters per second:
[tex]t_{e} = \frac{s}{v_{s}}[/tex] (1)
Please notice that distance travelled by sound is twice the depth of the sunken object.
If we know that [tex]s = 10000\,m[/tex] and [tex]v_{s} = 1530\,\frac{m}{s}[/tex], then the maximum echo time is:
[tex]t_{e} = \frac{10000\,m}{1530\,\frac{m}{s} }[/tex]
[tex]t_{e} = 6.535\,s[/tex]
Any sunken object whose echo time is less than 6.535 seconds can be retrieved. As the echo time related to the item was 6.2 seconds, the research historian can be able to retrieve the object.
A ball is projected horizontally from the top of a bertical building 25.0m above the ground level with an initial velocity of 8.25m/s . Calculate :
a. How long is the ball in flight before striking the ground
b. How far from the building does the ball strike the ground
Answer:
Solution given:
height [H]=25m
initial velocity [u]=8.25m/s
g=9.8m/s
now;
a. How long is the ball in flight before striking the ground?
Time of flight =?
Now
Time of flight=[tex]\sqrt{\frac{2H}{g}}[/tex]
substituting value
=[tex]\sqrt{\frac{2*25}{9.8}}[/tex]=2.26secondsthe ball is in flight before striking the ground for 2.26seconds.b. How far from the building does the ball strike the ground?
Horizontal range=?
we have
Horizontal range=u*[tex]\sqrt{\frac{2H}{g}}[/tex]
=8.25*2.26=18.63mThe ball strikes 18.63m far from building.When solving projectiles you will often get two possible times for solutions. Sometimes a time will be negative and can be rejected. Other times both times will be positive and therefore possible. Explain why both times above make sense in the context of the given information used. Which time will you ultimately choose and why?
Context is attached below.
Answer:
The reason why times, 0.23 s, and 1.80 s makes sense is that a projectile passes through a given height level, which is lesser than the maximum height reached by the projectile, twice in its trajectory
Explanation:
The formula for the time of motion of a projectile is given as follows;
[tex]t = \dfrac{-V_{oy} \pm \sqrt{V_{oy} ^2 - 2 \cdot g \cdot \Delta y} }{-g}[/tex]
Therefore, when [tex]V_{oy} ^2 = 2 \cdot g \cdot \Delta y}[/tex], we have only one time value
When [tex]V_{oy} ^2 > 2 \cdot g \cdot \Delta y}[/tex], two time values can be obtained and both will be positive when we have;
[tex]V_{oy} > \sqrt{V_{oy} ^2 - 2 \cdot g \cdot \Delta y} }[/tex]
When [tex]V_{oy} < \sqrt{V_{oy} ^2 - 2 \cdot g \cdot \Delta y} }[/tex], one of the time values will be negative and can be rejected
Therefore, given that the times obtained above are 1.80 s, and 0.23 s, and both make sense due to the following reason;
In the path of the projectile motion of the basketball, there are two points in time at which the height of the basketball above the starting point is exactly 2 meters, given that the maximum height reached is more than 2 meters
The first time the basketball is 2 meters above the point it is shot is lesser of the two calculated time values, which is during the upward motion of the basketball before it reaches the maximum height, while the second time is, which is the larger calculated time, is the time that the basketball reaches the hoop, after flying past the highest point
What is the change in velocity of a 22-kg object that experiences a force of 15 N for
1.2 seconds?
Answer:
Force = mass × acceleration
Acceleration:
[tex]{ \tt{15 = (22 \times a)}} \\ { \tt{a = \frac{15}{22} \: {ms}^{ - 2} }}[/tex]
From first Newton's equation of motion:
[tex]{ \bf{v = u + at}} [/tex]
Change = v - u:
[tex]{ \tt{v - u = (a \times t)}} \\ { \tt{v - u = ( \frac{15}{22} \times 1.2) }} \\ { \tt{v - u = 0.82 \: {ms}^{ - 2} }}[/tex]
How to cause a short circuit?
Answer:
Make the bare wired touch each other or loosen the connection at one point
to determine the temperature of a gas in kelvins add ____ to the ____ temperature a) 100 degrees, celsius b) 273 degrees, fahrenheit c)273 degrees, celsius
A gas cylinder contains argon atoms (m = 40.0 u). The temperature is increased from 293 K (20◦C) to 373 K (100◦C).(a) What is the change in the average kinetic energy per atom? *
Answer:
1.656 × 10^(-21) J
Explanation:
Formula for the average translational kinetic energy per atom is;
K.E = (3/2)kΔt
Where;
k is boltzmann constant = 1.38 × 10^(-23) J/K
ΔT is change in temperature = 373 - 293 = 80 K
Thus;
K.E = (3/2) × 1.38 × 10^(-23) × 80
K.E = 1.656 × 10^(-21) J
which of the following is an example of the correlation of productivity and a positive attitude ?
Group of answer choices.
A. James likes ch.atting with his coworkers but is easily distracted.
B. James does some of his coworkers' work because he wants to be popular.
C. James accepts additional tasks at work as a way to show he can handle greater responsibility.
D. James turns down additional tasks at work because he doesn't want more responsibility.
Answer:
C. James accepts additional tasks at work as a way to show he can handle greater responsibility.
Explanation:
An employee can be defined as an individual who is employed by an employer of labor to perform specific tasks, duties or functions in an organization.
Basically, an employee is saddled with the responsibility of providing specific services to the organization or company where he is currently employed while being paid a certain amount of money hourly, daily, weekly, or monthly depending on the contractual agreement between the two parties (employer and employee).
A productive employee is a kind of person that is highly effective and efficient in the performance of his or her duties, especially through the use of their skills, knowledge, competence and expertise (experience). Also, a positive attitude or attribute are ethical and morally right characteristics (qualities) that a person exhibits.
Typically, there exist a strong relationship between a positive attitude and the level of productivity of an employee.
Hence, an example of the correlation of productivity and a positive attitude would be James accepting additional tasks at work as a way to show he can handle greater responsibility. Thus, he is more focused on challenging himself to handle greater responsibility by accepting additional tasks at his work place.
M1=1kg,m2=2kg,khi chuyển động cùng chiều có vận tốc lần lượt là v1=5m/s và v2 =6m/s động lượng của 2 vật bằng
Answer:
Total momentum is 17 kg m/s.
Explanation:
M1 = 1 kg, m2 = 2 kg, when moving in the same direction with speeds v1 = 5 m/s and v2 = 6 m/s, the momentum of the two bodies is equal to
The momentum is defined as the product of mass and the velocity of body.
Momentum of first body. p' = M1 v1 = 1 x 5 = 5 kg m/s
Momentum of second body, p'' = M2 v2 = 2 x 6 = 12 kg m/s
As they both are moving in the same direction so the net momentum is
p = p' + p''
p = 5 + 12 = 17 kg m/s
What is the length of the y-component of the vector plotted below?
A. 1
B. 4
C. 2
D.3
Answer:
um .... D. D D D D D this should be it
4 (a) (1) Which lens is a converging lens with the greatest power?
OOIY
回A
B
OD
(ii) The equation that relates the power of a lens to the focallar
Answer:
Answer
Explanation:
please like and mark be mrain list
Which of the following objects is NOT accelerating?
Group of answer choices
a bicyclist moving at a constant speed in a straight line
a space shuttle as it is orbiting the Earth
a truck turning a sharp corner
a car going from 5 mph to 10 mph
Answer:
A Bicycle
Explanation:
A Space shuttle accelerating because the Earth pulls on it through the gravitational force.
A Truck is accelerating because acceleration is necessary for an object to change direction.
A car is accelerating because it is speeding up unexpectedly?????
