Which of the following is the correct Lewis structure for the molecule NH3?
N=H
Option 1
H-N-H
Option 3
-I
H
H=N:
Option 2
H-N-H
H
Option 4

Atomic number of Technetium is 43, Mass number is 99  and symbol is Tc ,hence symbol of isotope is  99 m43 Tc

General representation of atom is AZ X

Where ,  A is mass number , Z is atomic number and X is symbol of element. Atomic number of Technetium is 43, Mass number is 99  and symbol is Tc ,hence symbol of isotope is  99 m43 Tc ,Where m stands for meta stable.

A chemical element with the atomic number 43 and the symbol Tc is known as technetium. It is the lightest element whose radioactive isotopes are all present. Technetium is a synthetic element that is created in abundance. The most prevalent source of naturally occurring technetium is uranium and thorium ores, where it spontaneously fissions as a byproduct, while molybdenum ores produce it as a byproduct of neutron capture. This crystalline, silvery-gray transition metal in group 7 of the periodic table is sandwiched between rhenium and manganese, and its chemical characteristics fall somewhere in the middle of the two nearby elements. Only in traces, 99Tc is the most prevalent naturally occurring isotope.

Learn more about Technetium here:

https://brainly.com/question/16184700

#SPJ4

A ring of C3H5 makes up the structure of a chemical with the empirical formula C5H8O that passes the iodoform test and does not discolor permanganate.

C5H8O → 1/2 (C5H12-C5H8) = 1/2(4)=2 carbons CH3C=O

No C=C after a negative permanganate test

Has a C=O bond

Methyl ketone as it tested positive for iodoform

C3H5 = ring

A cyclopropyl group is a chemical structure produced from cyclopropane that may take part in cycloadditions and rearrangements of cyclopropane in organic processes. The group contains a chemical link from each of the three carbons to both of the other two, and its empirical formula is C3H5.

Learn more about the cyclopropyl group at

https://brainly.com/question/29676190?referrer=searchResults

#SPJ4

False, The metals have been oxidized because they have lost electrons to oxygen; oxidation is hence the loss of electrons.

The exchange of electrons between an electron donor (which oxidizes) and an electron acceptor occurs in oxidation-reduction or redox processes (that becomes reduced). While reducing agents are quick to give up electrons, oxidizing agents have a high desire for them.

Because they are the primary sources of energy on this planet, both natural and man-made (or "redox"), oxidation-reduction reactions are significant. Large amounts of energy are typically released when molecules undergo oxidation through the elimination of hydrogen or in conjunction with oxygen.

To know more about electrons visit:-

https://brainly.com/question/1255220

#SPJ1

The table, which lists information about the measured acid dissociation constants of three unknown weak acids is 3,2 and 1 respectively.

Acid               [tex]K_{a}[/tex]                    [tex]pK_{a}[/tex]               Relative strength

A                1.6×10⁻¹¹                10.8                          3

B                 1.64×10⁻²              1.78                          2

C                 2.5×10⁻²                1.6                            1

Weak acids are acids that do not completely dissociate in solution. In other words, a weak acid is an acid that is not a strong acid. The strength of weak acids depends on the strength with which they dissociate. The more it dissociates, the stronger the acid. HCl is a strong acid because it dissociates almost completely.

KCl is naturally a salt with a strong basic cation and a strong acidic anion neither of which affect pH paper and has a standard value of pH 7.0 being neutral. shape. Vinegar is a combination of acetic acid and water made by a two-step fermentation process.

Learn more about Weak acids here:- https://brainly.com/question/24018697

#SPJ4

A short circuit can cause ​giant spark ,because there is nothing in the circuit to limit the current and absorb the electrical energy. Heat builds up quickly in the wire and power supply. (Lesson 4.05) an explosion a release of harmful chemicals a fire All of the above

What is Circuit?

The point where the electrons enter the electrical circuit is known as the source, and the point where they depart is known as the return. Let's do a little experiment; you'll require the following:

Electrical tape, wire, and electric bulbs

power source

Only when there is at least one closed loop running from the positive to the negative end of the circuit is it considered complete. This is the most basic type of electrical circuit. A television's internal circuit is more intricate and made up of several parts

Learn more about Circuit from given link

https://brainly.com/question/2969220

#SPJ1

Answer:

See below for detailed answers to each part of the question.

Explanation:

To solve this problem, we must consider Le Chatelier's Principle, which states the equilibrium position of a system will shift to counteract any changes that occur in the system. This principle can be used to answer each part of your question.

In Part i, we know that N2 is a reactant. Decreasing the concentration of N2 would cause this reaction to shift towards the reactants (to the left), effectively producing more N2 to counteract the change. This would simultaneously decrease the concentration of NH3, since this is a product of the reaction.

Considering the next part, also using Le Chatelier's principle, increasing the pressure would encourage the reaction to shift to decrease the pressure. In order to decrease the pressure, the equilibrium should shift to the side with fewer gas molecules. In this case, there are 4 gas molecules in the reactants and 2 in the products, so the equilibrium position shifts to the products (to the right) to decrease the pressure. This would also increase the amount of NH3, since NH3 is a product.

In Part iii, the temperature is increased. To counteract this change, the reaction will shift to decrease the temperature. Since we know that this reaction is exothermic, the equilibrium will shift towards the reactants (left) to decrease the temperature. This would decrease the amount of NH3.

Finally, in Part IV, if a catalyst is added, this will not change the equilibrium position. Catalysts do not change the overall energy change of a reaction, only the activation energy, so no equilibrium shift will be observed. Thus, the amount of NH3 will not increase/decrease but will remain the same.

For more practice problems with LeChatelier's Principle, check out these other questions on Brainly:

https://brainly.com/question/14892046

https://brainly.com/question/2001993

Answer:

I’m struggling with these too! Any help is appreciated

Explanation:

Both I and II are true statements. The melting point of a solid is the temperature at which solid changes from a solid to a liquid.

Molecular solids are composed of molecules held together by weak intermolecular forces, such as dipole-dipole interactions, hydrogen bonds, and London forces.

These types of bonds are weaker than the ionic bonds that are present in ionic solids, which is why molecular solids have lower melting points than ionic solids.

In addition, the shape of the molecule will influence its melting point or boiling point. For example, molecules with a higher surface area will have a higher boiling point than molecules with a lower surface area.

This is due to the increased surface area leading to increased intermolecular forces and a higher boiling point.

To know more about the London dispersion force, click here:

https://brainly.com/question/1454795

#SPJ4

Both I and II are true statements. The melting point of a solid is the temperature at which solid changes from a solid to a liquid.

Molecular solids are composed of molecules held together by weak intermolecular forces, such as dipole-dipole interactions, hydrogen bonds, and London forces.

These types of bonds are weaker than the ionic bonds that are present in ionic solids, which is why molecular solids have lower melting points than ionic solids.

In addition, the shape of the molecule will influence its melting point or boiling point. For example, molecules with a higher surface area will have a higher boiling point than molecules with a lower surface area.

This is due to the increased surface area leading to increased intermolecular forces and a higher boiling point.

To learn more about London dispersion force visit:

https://brainly.com/question/20514601

#SPJ4

The number of photons that are in the light is obtained as  133 photons.

We know that the photons are the particles of light and that we can be able to obtain the energy of the photons. Let us note that the photons also have a given wavelength which can be able to calculate with the formula for the energy of the photon.

An adaptation of the Plank's equation that has to do with the wavelength of the wave can be given by the use of the formula;

E = nhc/λ

E = energy

n = Number of photons

h = Plank's constant

c = Speed of light

λ = wavelength

Then we have;

n = Eλ/hc

n =  4.0 x 10^-17 * 600 * 10^-9/6.6 * 10^-34 * 3 * 10^8

n = 2.4 * 10^-23/1.98 * 10^-25

n = 1.33 * 10^2

n = 133 photons

There are 133 photons present

Learn more about number of photons:https://brainly.com/question/29855605

#SPJ1

The balanced chemical equation for the given chemical reaction is  AlCl₃ + 3 NaOH [tex]\rightarrow[/tex]Al(OH)₃ +3 NaCl.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ1

a) Partial pressures is Po2 = 8.13 atm,Pch4=3.94atm,Phe = 5.6 atm,B) Total pressure= 17.73 atm, C) mole fraction are Хо2 =0.46, xch4=0.22, xhe=0.32.

mole fraction are Хo2 =3.3/3.3+ 16 + 2.3,Хо2 =0.46, xch4=0.22, xhe=0.32. Xo2 = no2/no2 + nch4 + nhe, total pressure = 8.13+3.94+5.6=17.73 atm. The pressure applied by a solitary gas in a combination is did refer to as its partial pressure. Presuming we get a combination of ideal gas law, we could use ideal gas equation to resolve issues involving gases inside a mixture. Partial Pressure can be defined as if a canning jar filled with far more than one gas, evey gas enforces pressure. The pressure of any gas enclosed within in the container is regarded to as its partial pressure. The number of molecules of a special component in a mix divided by the total amount of moles in the given medium is symbolised by the mole fraction. It's a means of expressing a solution's concentration.

Learn more about Partial pressures here:

https://brainly.com/question/29905133

#SPJ4

The mass (in grams) of HNO₃ that reacted to produce 151.75 grams of H₂O is 531.125 grams

We shall consider the balanced equation to obtain usefull information.

2HNO₃ + Ca(OH)₂ → Ca(NO₃)₂ + 2H₂O

From the balanced equation above,

36 grams of H₂O were produced from 126 grams of HNO₃

With the above information, we can determine the mass of HNO₃ that reacted to produce 151.75 grams of H₂O. Details below:

From the balanced equation above,

36 grams of H₂O were produced from 126 grams of HNO₃

Therefore,

151.75 grams of H₂O will be produce from = (151.75 × 126) / 36 = 531.125 grams of HNO₃

Thus, the mass of HNO₃ that reacted is 531.125 grams

Learn more about mass:

https://brainly.com/question/25824598

#SPJ1

Among the given radiations, the one with shortest wavelength, highest energy and highest frequency is ultraviolet radiation.

Electromagnetic spectrum is the arrangement of different radiations in  the order of decreasing wavelength or increasing frequency. The wavelength of an electromagnetic wave is inversely proportional to the frequency and energy.

Thus, as the frequency increases energy of the wave increases and wavelength decreases. The order of waves in the decreasing order of wavelength is, radio waves, microwaves, infrared, visible, ultraviolet, x-ray and gamma ray.

Thus, among the given radiation, the highest energy, highest frequency and shortest wavelength is ultraviolet radiation.

To find more on ultraviolet radiation, refer here:

https://brainly.com/question/14504556

#SPJ1

D ) The answer that best depicts the diagnostic cleavage that is typical of the mica group of minerals which include muscovite and bietet is a single, planar cleavage .

Cleavage is the splitting of minerals along natural planes of weakness

When there is only one cleavage plane, a single, planar cleavage known as the basal or pinacoidal cleavage takes place. cleaved at the base of the graphite. Mica (like muscovite or biotite) has basal cleavage, that's why mica can be peeled into thin sheets.

So single planar cleavage is answer of this question.

To know more about cleavage click below link:

https://brainly.com/question/11933501#

#SPJ4

According to the given statement 5 °C temperature change is observed.

The variation in heat is measured by a calorimeter. A metal water container placed above an exhaust gases serves as the basic component of a calorimeter. The amount of water's temperature change is measured using a thermometer.

The calorimeter burns a 1.221g sample.

The calorimeter contains 1.240 kg of water .

The calorimeter has a heat capacity of 1365 j/°C.

∆H rxn = -3227 kj/mol of benzoic acid

Given: 1.221 g is the mass of the benzoic acid

Benzoic acid's molecular weight is 122.12 g/mol.

122.12 g benzoic acid = 1 mol

1.221 g benzoic acid =1.221/122.12= 0.0099 moles

When burned, 1 mol of benzoic acid releases 3227 kj of energy.

Burning 0.0099 moles of benzoic acid produces energy

= 3227kj×(0.0099mols)/1 mol =32.2647 kj =32264.7 j

The calorimeter absorbed thermal energy

= 1365 j/C ×T

Water absorbs heat

= m× C× T

= 1240 g( 4.18 j/gC ) ×T

= 5183.2j/C×T

the total amount of heat absorbed

= 1365T + 5183.2T

=6548.2T

6548.2T=32264.7

T= 4.92 deg.C

T= 5 °C

The result is a 5 °C temperature change.

To know more about Calorimeter visit:

https://brainly.com/question/4802333

#SPJ1

Zinc reacts with hydrochloric acid is the correct observation of a chemical property and the right response to the question above.

Equation:

Zn +2HCL  →    ZnCl2 +H2

Balanced equation:  

 Zn +2HCL  →     ZnCl2 +H2

Atomic number 30 and the letter Zn identify zinc as a chemical element. When the oxidation is eliminated, zinc becomes shiny-greyish and becomes a somewhat brittle metal at normal temperature.

Zinc is a crucial trace element for all living things, including humans, animals, plants, and microbes. After iron, it is the trace metal found in humans in the second-highest concentration. As a crucial cofactor for several enzymes, zinc is also a crucial vitamin for development. Many disorders can be caused by a zinc shortage. slowing in growth, infection susceptibility, and diarrhea are among effects of deficiency in children. . Consuming too much zinc can result in copper shortage, ataxia, and sluggishness.

To know more about element visit:

https://brainly.com/question/13794764

#SPJ1

Taking into account the ideal gas law, the number of moles of carbon dioxide is 0.119 moles.

An ideal gas or theoretical gas is a set of separate gaseous molecules separated from each other in such a way that no intermolecular forces are exerted between them.

The ideal gas condition normally occurs at low pressures and high temperatures, which allows each particle to be far from each other so that they do not interact.

The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:

P×V = n×R×T

Where:

In this case, you know:

Replacing in the ideal gas law:

2 atm× 2 L= n×0.082 (atmL)÷(molK)× 410 K

Solving:

[2 atm× 2 L]÷ [0.082 (atmL)÷(molK)× 410 K]= n

0.119 moles= n

Finally, the number of moles is 0.119 moles.

Learn more about the ideal gas law:

brainly.com/question/4147359

#SPJ1

An example of human intervention in the genes is; humans breed dogs to be smaller and more friendly. Option A

We know that the gene is the unit of inheritance that can be found in the chromosome of the organism. The genes that the organism does have is what would tell must the observed traits of the organism and this is called the phenotype of the organism.

We know that human's do have an impact with the fact that the genes can spread in an organism. In many cases, we can see the alteration of the genes when we deal with the genetic make up of the pets.

Learn more about genes:https://brainly.com/question/8832859

#SPJ1

The value of the  Decomposition equilibrium is 2-1 =1.

pV=nRT. n=m/Mr = 3.509 / 135 = 0.026 moles.

a) p=nRT/V=0.026 x 0.082 x 375/1 = 0.8 atm.

b) SO2Cl2 (g) ⇌ SO2 (g) + Cl2 (g).

1.43 - 0.8 = 63

2-1 =1.

0.63 x 0.026 = 0,01638. 0.026 -0,01638= 0.00962 moles of SO2CL2.

0.01638 moles of SO2 and 0.01638 moles of Cl2.

0.01638 + 0.01638 + 0.00962 = 0.04238 moles general.

1.43 x 0.01638 / 0.04238 = 0.5526 atm of SO2 and Cl2.

1.43 x 0.00962 / 0.04238 = 0.3246 atm of SO2CL2.

c) 0.01638 x 0.01638/ 0.00962=0,0278902703

d) Will react turn to the right

Decomposition is endothermic:- Yes all decomposition reactions are endothermic. Decomposition reactions involve the breaking of bonds that require energy. Due to this decomposition reactions are generally endothermic in nature.

Learn more about Decomposition endothermic here https://brainly.com/question/29999634

#SPJ4

(a) The pressure in the atmosphere would be = 0.800 atm.

(b) Partial pressure of   [tex]P_{SO_{2}Cl_{2} } =0.170 atm[/tex]

    Partial pressure of   [tex]P_{SO_{2}}=0.630atm[/tex]

    Partial pressure of   [tex]P_{Cl_{2}=0.630 atm[/tex]

(c) Equilibrium constant at 375 K is 2.33 atm.

(d) If the temperature were raised to 500K, the value of the equilibrium constant will increase.

(a) Mass of [tex]SO_{2}Cl_{2}[/tex] = 3.509 g

   Molar mass of [tex]SO_{2}Cl_{2}[/tex] = 135.0 g/mol

   Thus, moles of [tex]SO_{2}Cl_{2}[/tex] are-

   Mole of [tex]SO_{2}Cl_{2}[/tex][tex]=\frac{3.500g}{135.0g/mol}[/tex]   [tex]=0.026moles[/tex]

The initial pressure of the [tex]SO_{2}Cl_{2}[/tex]  is calculated using the Ideal gas law-

               [tex]P_{SO_{2}Cl_{2} } =\frac{nRT}{V} =\frac{(0.026moles)(0.082Latm/molK)(375K)}{1.00L}[/tex]

               [tex]P_{SO_{2}Cl_{2} } = 0.800atm[/tex]

Thus, the Initial pressure of [tex]SO_{2}Cl_{2}[/tex]= 0.800 atm.

(b) Now,

             [tex]P_{Total} =1.43atm[/tex]

At equilibrium,

             [tex]P_{Total} =P_{SO_{2}Cl_{2} } +P_{SO_{2} } +P_{Cl_{2} }[/tex]

Thus, using the data from ICE table, solve for x-

1.43 = (0.800 - x) + x + x(1.43) = 1.43 - 0.800 = 0.630 atm

Hence, at equilibrium at 375 K, the partial pressure of each species present is-

             [tex]P_{SO_{2}Cl_{2} } = 0.800-0.630 =0.170atm[/tex]

              [tex]P_{{SO_{2} } } = x=0.630atm[/tex]

              [tex]P_{{Cl_{2} } } = x=0.630atm[/tex]

(c) The expression of the equilibrium constant in terms of pressure for the decomposition of [tex]SO_{2}Cl_{2}[/tex] is written as-

                       [tex]K_{P} =\frac{P_{SO_{2} .}P_{Cl_{2} } }{P_{SO_{2}Cl_{2} } }[/tex]

Using the partial pressure values at 375 K , solve for [tex]K_{P}[/tex]-      

                      [tex]K_{P} = \frac{(0.630atm)(0.630atm)}{0.170atm} =2.33atm[/tex]

Hence, the equilibrium constant at 375 K is 2.33 atm.      

(d) As the decomposition of  [tex]SO_{2}Cl_{2}[/tex]  is endothermic, thus on increasing the temperature, more heat is added, so the reaction will go in a forward direction producing more products.

Thus, [tex]K_{500}[/tex] > [tex]K_{375}[/tex]

Hence, if the temperature were raised to 500K, the value of the equilibrium constant will increase.

Learn more about Equilibrium here

https://brainly.com/question/517289

#SPJ4

Geothermal power plants use the renewable resource of heat from within the Earth to generate electricity is true .

Define geothermal energy.

Deep in the Earth's core, heat is produced that is known as geothermal energy. A clean, sustainable energy source that can be used to generate heat and electricity is geothermal energy.

Rocks, water, gas, and other geological materials are constantly being warmed by heat radiating from the core. Nearby rocks and aquifers underground are heated by magma. Geysers, hot springs, steam vents, submerged hydrothermal vents, and mud pots can all emit hot water. These are all geothermal energy sources.

They can either be directly heated by capturing their heat or by using the steam they produce to produce power. Buildings, parking lots, and sidewalks may all be heated with geothermal energy.

To know more about thermal energy use link below:

https://brainly.com/question/19666326

#SPJ1

True. Calcium ions (Ca2+), which are released by the SR, bind to troponin in the sarcoplasm. Then, troponin displaces tropomyosin from the actin myosin-binding sites.

Troponin levels that are extremely high indicate the onset of a heart attack. Within six hours after a heart attack, the majority of individuals experience elevated troponin levels. Mostly everyone who has experienced a cardiac arrest will still have elevated levels after 12 hours. After a heart attack, troponin levels may continue to rise for 1 to 2 weeks. For instance, the typical levels for troponin I is 0 to 0.04 ng/mL, whereas the normal range for rising cardiac troponin (hs-cTn) is less than 14 ng/L. Increases in troponin levels may result from other kinds of heart damage. One of these is sinus arrhythmia.

Learn more about troponin here:

https://brainly.com/question/12973002

#SPJ4

2 remedies a seller has under the UCC when the buyer has breached and the seller still possesses the goods are that he can cancel the contract or withhold the delivery.

By contract, what did you mean?

An agreement between parties that establishes legal duties for both parties is known as a contract. Mutual consent, demonstrated by a valid offer and acceptance, sufficient consideration, capability, and legality are the fundamental components needed for the agreement to be a legally enforceable contract.

Contract with example: What is it?

A commitment made by one party to another that they will or won't take a particular action in the future. As an illustration, I'll offer you $3,500 to buy your car. An acceptance.

Therefore, it usually reflects the conditions of the offer—an indication, through speech or action, that both parties accept the terms of the contract.

To know more about Contract visit: brainly.com/question/2669219

#SPJ4

To solve such we need to have concept of spontaneity. The terms "feasible" and "likely" are both used to describe spontaneous processes. Therefore, second reaction will occur spontaneously.

The word "spontaneity" refers to a process's viability. A process is referred to as spontaneous if it can occur either on its own or as the result of some initiation under a certain set of circumstances. In other terms, a spontaneous process is one that may happen on its own, without any outside intervention.

For a reaction to be spontaneous, the value for ΔG should be negative and for that cell potential should be positive value according to following equation.

ΔG=-nFE

ΔG = Gibbs's free energy

E= cell potential

F= 96500

n= number of electron

Therefore, second reaction will occur spontaneously.

To learn more about spontaneity, here:

https://brainly.com/question/5372689

#SPJ1

Mendeleev's periodic table includes all the elements that were known at the time.

The rows of the table, were called periods and each period contained eight elements that increased in atomic mass from left to right.

The columns of the table, called groups, contained elements with similar properties.

The special this about this table was, the gaps for predicted elements were left.

In this question, we are given with four statements and are asked to determine, which of the following statement is not true regarding Dmitri Mendeleev's periodic table.

Out of these four options, option number 1 is correct as the statement distribution of elements determined by electron configuration is not true regarding Mendeleev's periodic table.

To know more about  Mendeleev's periodic table:

brainly.com/question/11974961

#SPJ4

How 3 L of ammonia is produced is discussed in detail.With the formula NH3, ammonia is a nitrogen and hydrogen inorganic chemical.

Ammonia, the simplest pnictogen hydride and a stable binary hydride, is a colorless gas with a strong, pungent odor.

N2 (g) + 3H2 (g) ——> 2NH3 (g)

2(1.5) L = 3 L

2(1.5) L = 3 L

The stoichiometric coefficients predict that 1 mol of nitrogen will combine with 3 mol of hydrogen to create 2 mol of ammonia.

As a result, if the ratio of nitrogen to hydrogen is 1:3, (let's say x and 3x), then 2x of the product, i.e. ammonia, will be produced.

Here, x = 1.5, resulting in a 3 L ammonia formation.

Complete question:Nitrogen and hydrogen gases react to form ammonia gas as follows:N2 (g) + 3H2 (g) ——> 2NH3 (g)

At a certain temperature and pressure, 1.5L of N2 reacts with 4.5L of H2.

If all the N2 and H2 are consumed, what volume of NH3, at the same temperature and pressure, will be produced?

learn more about Ammonia Refer:brainly.com/question/15409518

#SPJ4

the IUPAC name of  4 tert butyl 3 chlorophenol will be given as

3-chloro-4-(1,1-dimethylethyl)phenol.

And the structure for the compound can be given as shown in figure.

IUPAC (International Union of Pure and Applied Chemistry), serves the international scientific endeavor in the dual function of a fundamental science and mission-oriented Union.

Naming according to IUPAC is based on naming a molecule's longest chain of carbons connected via single bonds forming alkane, whether in a continuous chain or in a ring.

All other deviations, either multiple bonds or atoms other than carbon and hydrogen, are indicated by prefixes or suffixes according to a specific set of priorities.

To know more about IUPAC:

brainly.com/question/16631447

#SPJ4

The H2O bond is the most polar because the difference in electronegativity between H and O is at its highest.

Since each of the molecules in the set contains hydrogen and another element, the bond that fluorine makes with the hydrogen molecule will be the most polar of the group since fluorine is the most electronegative element in the periodic table. Check each bond's atoms' electronegativity properties. The most polar link will match the difference in electronegativity that is highest. The response is (b) N–H. The short answer is that because nitrogen is one of the most electronegative elements in the periodic table, its bond with hydrogen will be the most polar of all those mentioned.

Learn more about electronegativity here-

https://brainly.com/question/17762711

#SPJ4

The Nernst equation and the link between the standard cell potential and free energy can be used to determine the equilibrium constant of the redox process in an electrochemical cell.

The ratio of the product concentration to the reactant concentration is the equilibrium constant. a fixed value for a certain reaction at a specific temperature. The letter "c" denotes the expression of the equilibrium constant in terms of concentrations.

The standard cell potential, temperature, reaction quotient, and the cell potential of an electrochemical cell are all related by the Nernst equation. The Nernst equation can be used to determine the cell potentials of electrochemical cells even under unusual circumstances.

To know more about Equilibrium Constant :

brainly.com/question/15118952

#SPJ4

A buffer solution is the  consists of a mixture of a weak acid and its conjugate base. it resists changes in pH upon addition of small amounts of acid or base.

The correct option from the given option is , the A buffer solution is the  consists of a mixture of a weak acid and its conjugate base. or the weak base and the conjugate acid. A buffer solution resist the the change in pH upon the addition of the small amount of the acid or base to them. the pH of buffer shows the little change when we add very small amount of the strong acid and the strong base.

The buffer solution has the ability to maintain the hydrogen ion concentration with only small amount of dilution  with acid or base.                                  

To learn more about buffer solution here

https://brainly.com/question/13219011

#SPJ4

Answer:

COMBINATION - - - ✓ -

DECOMPOSITION - - ✓ - -

SINGLE REPLACEMENT ✓ - - - -

DOUBLE REPLACEMENT - - - - ✓

COMBUSTION - ✓ - ✓ -

NEUTRALIZATION - - - - ✓

It is true that the euler characteristics are equivalent if a map of chemical chain complexes induces an isomorphism on homology. A mapping between two structures.

That preserves structure is known as an isomorphism. Of the same kind that an inverse mapping can reverse. If an isomorphism can be found between two mathematical structures, they are said to be isomorphic. Chemical processes take place everywhere around us, from the food our bodies metabolize to how the sunlight we receive is produced. It's crucial to understand physical and chemical changes before starting with chemical reactions. A material thing or system's structure is how its constituent parts are arranged and structured, or the organized object or system itself.

Learn more about chemical here

https://brainly.com/question/29039149

#SPJ4