Answer:
C. Recording an item that should be recorded as an operating activity as an investing activity.
Explanation:
Hope it helped
Identify five HRM criteria or components that can be used to measure organizational effectiveness or ineffectiveness. "Grievance rate" is an example.
Answer:
They include;
1. Customer Satisfaction
2. Absenteeism
3. Legal Compliance
4. Performance
5. Training
Explanation:
The Human Resource Management criteria that are used to measure the effectiveness or ineffectiveness of an organization, are a list that gives an idea of how an organization is performing, and this list can serve as a basis of comparison with other organizations. These options include;
1. Satisfaction: If the employees are treated fairly and so, feel satisfied with the organization, then they can be said to be effective.
2. Absenteeism: When workers are always absent from work it does not present the organization as an effective one.
3. Legal Compliance: The organization must be able to comply to government rules and regulations guiding the business to be rated as effective.
4. Performance: High or low-performance which is reflected in the turnover rates would be an indication of how effective or ineffective an organization is.
5. Training: The organization should be able to provide regular standard training for its workers to be rated as effective.
Kelley Company reports $1,250,000 of net income for 2017 and declares $175,000 of cash dividends on its preferred stock for 2017. At the end of 2017, the company had 380,000 weighted-average shares of common stock. 1. What amount of net income is available to common stockholders for 2017
Answer:
Net income available to common stockholders is $1,075,000
Explanation:
Net Income $1,250,000
To Preferred Shareholders $175,000
Net income available to $1,075,000
common stockholders
Basic earnings per share = Net income available to common stockholders / weighted average shares of common stock
Basic earnings per share = $1,075,000 / 380,000
Basic earnings per share = $2.8290 per share.
Someone offers to buy your car for four, equal annual payments, with the first payment coming 2 years from today. If you think that you could sell your car to another purchaser for an immediate payment of $9,000 and the interest rate is 10%, what is the minimum annual payment that you would accept from this buyer?
Answer:
4i8484884858585848484i
The declaration, record, and payment dates in connection with a cash dividend of $77,000 on a corporation's common stock are October 1, November 7, and December 15.
Required:
Journalize the entries required on each date.
Answer:
Oct 1
Dr Cash Dividend $77,000
Cr Dividend Payable $77,000
Nov 7
No Entry required on the record date
Dec 15
Dr Dividend Payable $77,000
Cr Cash
Explanation:
Preparation of the Journal entries for each date
Based on the information given we were told that the cash dividend of the amount of $77,000 was a corporation's common stock are October 1, November 7, and December 15 which means that the transaction will be recorded as:
Oct 1
Dr Cash Dividend $77,000
Cr Dividend Payable $77,000
Nov 7
No Entry required on the record date
Dec 15
Dr Dividend Payable $77,000
Cr Cash
Geese Company utilizes the LIFO retail inventory method. Its cost-to-retail percentage is 60% based on beginning inventory and 64% based on current-period purchases. The company determined that beginning inventory at retail was $200,000 and that during the current period a new layer was added with retail value of $50,000. The cost of ending inventory should be
Answer:
$152,000
Explanation:
Calculation for the cost of the ending inventory
First step is to calculate the cost-to-retail percentage of the beginning inventory amount
Using this formula
Beginning Inventory =Cost-to-retail percentage*Beginning inventory at retail
Let plug in the formula
Beginning Inventory =60%*$200,000
Beginning Inventory =$120,000
Second step is to calculate current-period purchases percentage of the new layer amount
Using this formula
Current period purchases= Purchases percentage* New layer
Let plug in the formula
Current period purchases=64%*50,000
Current period purchases=$32,000
The last step is to find the cost of the ending inventory using this formula
Ending inventory cost=Beginning Inventory+Current period purchases
Let plug in the formula
Ending inventory cost=$120,000+$32,000
Ending inventory cost=$152,000
Therefore the cost of the ending inventory will be $152,000
You must decide between $25,000 in cash today or $30,000 in cash to be received two years from now. If you can earn 8 percent interest on your investments, which is the better deal?
Answer:
The deal to receive $30000 is better.
Explanation:
To find the better deal we need to calculate the present value of $30000 and then compare it with the amount $25000. If the amount is greater than the $25000, then the amount should be received after the 2 years.
The given time period (n )= 2
Interest rate (r ) = 8%
The amount received after 2 years = $30000
[tex]\text{Present value of money} = \frac{Future \ value}{(1 + r)^n } \\= \frac{30000}{(1+0.08)^2} \\= $25720.16[/tex]
Since the amount is more than $25000 so the deal to receive the money after 2 years will be better.
One year ago, you purchased a stock at a price of $55.20 per share. Today, you sold your stock at a loss of 18.63 percent. Your capital loss was $12.62 per share. What was the total dividends per share paid on this stock over the year
Answer:
Dividend = $2.34
Explanation:
Purchase Price = $55.20
Loss on stock = 18.63% of $55.20 = $10.28
Capital Loss = $12.62
Dividend = Capital Loss - Total Loss
Dividend = $12.62 - $10.28
Dividend = $2.34
The following accounts are from last year's books of Sharp Manufacturing: Raw Materials Bal 0 (b) 154,800 (a) 166,000 11,200 Work In Process Bal 0 (f) 513,200 (b) 132,400 (c) 168,800 (e) 212,000 0 Finished Goods Bal 0 (g) 464,000 (f) 513,200 49,200 Manufacturing Overhead (b) 22,400 (e) 212,000 (c) 26,400 (d) 156,800 6,400 Cost of Goods Sold (g) 464,000 Sharp uses job-order costing and applies manufacturing overhead to jobs based on direct labor costs. What is the amount of direct materials used for the year
Answer:
$132,400
Explanation:
Based on the information given we were told that Sharp make use of job order costing as well as applies manufacturing overhead to jobs which are often based on the direct labor costs, which simply means the amount of direct materials that is been used for the year will be a debit amount of $132,400 in the work in process .
Therefore the amount of direct materials used for the year will be $132,400
Division A had ROI of 15% last year. The manager of Division A is considering an additional investment for the coming year. What step will the manager likely choose to take
Answer: c.Reject the investment if it returns less than 15% ROI.
Explanation:
Additional investments should yield incremental returns if they are to be accepted. In the previous year, Division A had an Return on Investment of 15%, when an additional investment is being considered, it must bring in more than that 15% if it is to be accepted.
Therefore, if an investment is to give a less than 15% ROI, it should be rejected as it is not bringing additional returns for the Division.
A stock had returns of 15.51 percent, 22.47 percent, −8.68 percent, and 9.43 percent over four of the past five years. The arithmetic average return over the five years was 12.71 percent. What was the stock return for the missing year?
Answer:
24.82%
Explanation:
Arithmetic average = sum of observations / number of observations
Let x = the stock return for year 5
12.71 % = (15.51% + 22.47% −8.68% + 9.43 + x) /5
Multiply both sides by 5
63.55% = (5.51% + 22.47% −8.68% + 9.43 + x)
63.55% = 38.73% + x
x = 63.55% - 38.73% = 24.82%
Bramble Corp. recorded operating data for its shoe division for the year. Sales$1300000 Contribution margin360000 Controllable fixed costs180000 Average total operating assets720000 How much is controllable margin for the year
Answer:
controllable margin for the year is $180,000.
Explanation:
The Controllable Margin is the Profit that is controllable by the divisional manager.
Calculation of Controllable Margin :
Contribution Margin $360,000
Less Controllable fixed costs ($180,000)
Division Controllable Margin $180,000
Akram owns a small farm. He employs 80 workers in the field and has recently hired a manager to help him manage the farm. The income of the business varies greatly during the year. The farm makes a small profit but Akram is ambitious. He wants to take over a neighbour’s farm and increase the range of crops he sells. He thinks that he needs long-term finance and plans to take out bank loan to pay for the takeover. He has already borrowed money to buy a new tractor. A friend has advised him to form a company and sell shares
Question Completion:
Requirement. Identity two types of short-term finance Akram could use when the farm income is low
Answer:
Akram's Farm
Akram's farm can make good use of the following short-term financing sources:
1. Akram's farm can use Accounts Payable to provide short-term trade finance when the farm buys farm inputs, equipment, and other supplies on credit. The farm's Accounts Payable can provide interest-free trade loans by allowing the farm to take longer time to settle the suppliers. But, the farm should not miss out on cash discounts - an important source of trade finance.
2. Akram's farm can generate finances by ensuring early collections of the Accounts Receivable. Akram's farm can also go ahead and borrow on the accounts receivable through short-term bank loans guaranteed on the accounts. The farm can also factor the accounts receivable by selling them to factoring and finance houses for less.
Explanation:
Akram's farm is still a small farm that is not yet formed as a company. The immediate concentration is growing the entity and starting the processes for changing its corporate status so that it can take advantage of the sources of finance available to companies.
Suppose that Mexico experienced a very severe period of inflation in 1972. As prices in Mexico rose, the demand in the foreign exchange market for Mexican pesos:
Answer:
demand for pesos would fall and supply would rise. their value would decrease as a result
Explanation:
Inflation is a persistent rise in general price level.
When there is high inflation in a country, the demand for the currency would fall because the value of the currency is low. this fall in demand coupled with the excess supply of the currency would lead to a fall in the value of the currency.
Hughey Co. as lessee records a capital lease of machinery on January 1, 2011. The seven annual lease payments of $350,000 are made at the end of each year. The present value of the lease payments at 10% is $1,704,000. Hughey uses the effective-interest method of amortization and sum-of-the-years'-digits depreciation (no residual value). Round to the nearest dollar.
a) Prepare an amortization table for 2 011 and 2012.
b) Prepare all of Hughey's journal entries for 2011.
Answer:
Both requirements are solved below
Explanation:
An amortization table can be made as follows
DATA
Lease term = 7years
annual lease payments = $350,0000
Present value of the leases payment = $1,704,000
Implicit interest rate = 10%
Requirement A Amortization table for 2011 and 2012
Date Annual payment Effective decreased Balance
interest liability $1,704,000
12/31/11 $350,000 $170,400 $179,600 $1524,400
12/31/12 $350,000 $152,440 $197,560 $1,326,840
Requirement B journal entries for 2011
January 1
Entry
DEBIT CREDIT
Leased machinery $1,704,000
Lease liability $1,704,000
December 31
Entry
DEBIT CREDIT
Interest expense $170,400
Lease liability $179,600
Cash $350,000
December 31
Entry
DEBIT CREDIT
Depreciation expense(w) $426,000
Accumulated depreciation $426,000
Working
Sum of the years = (7+6+5+4+3+2+1) = 28
Cost = $1,704,000
Residual value = $0
Estimated life = 7years
Depreciation expense = $1,704,000 x 7/28
Depreciation expense = $426,000
FIFO Perpetual Inventory
The beginning inventory at Dunne Co. and data on purchases and sales for a three-month period ending June 30 are as follows:
Date Transaction Number
of Units Per Unit Total
Apr. 3 Inventory 48 $150 $7,200
8 Purchase 96 180 17,280
11 Sale 64 500 32,000
30 Sale 40 500 20,000
May 8 Purchase 80 200 16,000
10 Sale 48 500 24,000
19 Sale 24 500 12,000
28 Purchase 80 220 17,600
June 5 Sale 48 525 25,200
16 Sale 64 525 33,600
21 Purchase 144 240 34,560
28 Sale 72 525 37,800
Required:
1. Record the inventory, purchases, and cost of merchandise sold data in a perpetual inventory record similar to the one illustrated in Exhibit 3, using the first-in, first-out method. Under FIFO, if units are in inventory at two different costs, enter the units with the LOWER unit cost first in the Cost of Goods Sold Unit Cost column and in the Inventory Unit Cost column.
Dunne Co.
Schedule of Cost of Goods Sold
FIFO Method
For the Three Months Ended June 30
Purchases Cost of Goods Sold Inventory
Date Quantity Unit Cost Total Cost Quantity Unit Cost Total Cost Quantity Unit Cost Total Cost
Apr. 3 $ $
Apr. 8 $ $
Apr. 11 $ $
Apr. 30
May 8
May 10
May 19
May 28
June 5
June 16
June 21
June 28
June 30 Balances $ $
2. Determine the total sales and the total cost of goods sold for the period. Journalize the entries in the sales and cost of goods sold accounts. Assume that all sales were on account.
Record sale
Record cost
3. Determine the gross profit from sales for the period.
$
4. Determine the ending inventory cost as of June 30.
$
5. Based upon the preceding data, would you expect the ending inventory using the last-in, first-out method to be higher or lower?
Answer:
Dunne Co.
Schedule of Cost of Goods Sold
FIFO Method
For the Three Months Ended June 30
Purchases Cost of Goods Sold Inventory
Date Description Quantity Unit Cost Total Cost Sales
Apr. 3 Inventory 48 $150 $7,200
Apr. 8 Purchase 96 180 17,280
Apr. 11 Sale 64 500 32,000
Apr. 30 Sale 40 500 20,000
May 8 Purchase 80 200 16,000
May 10 Sale 48 500 24,000
May 19 Sale 24 500 12,000
May 28 Purchase 80 220 17,600
June 5 Sale 48 525 25,200
June 16 Sale 64 525 33,600
June 21 Purchase 144 240 34,560
June 28 Sale 72 525 37,800
June 30 Total 448 360 $92,640 $184,600
June 30 Balances 88 $240 $21,120
2. Determination of total sales and cost of goods sold and Journal Entries:
Debit Accounts Receivable $184,600
Credit Sales Revenue $184,600
To record the sales of goods on account for the period.
Debit Cost of Goods Sold $92,640
Credit Inventory $92,640
To record the cost of goods sold for the period.
3. Income Statement for determining the gross profit:
Sales Revenue $184,600
Cost of goods sold $92,640
Gross profit $91,960
4. Determination of the ending inventory cost of June 30:
Ending Inventory units = 88
Cost per unit (FIFO) = $240
Total = $21,120
5. The ending inventory would be lower if the ending inventory was valued using the Last-in, First-out (LIFO) method. The purchase price was increasing instead. Using LIFO means that ending inventory would be valued at the cost of the purchases in earlier months because of the assumption with LIFO that goods sold are from the last purchases instead of the earlier purchases.
Explanation:
Assume you have a margin account with a 50% initial margin. You purchase 100 shares of stock at $80 per share. The price increases to $100 per share. What is the net value of your investment (margin) now
Answer:
Net value of the investment (margin) is $6,000
Explanation:
The initial margin = (100 shares * $80) * 50%
The initial margin = $4,000
Increase in the Margin value = 100 shares* ($100-$80)
Increase in the Margin value = 100 shares * $20
Increase in the Margin value =$2,000
Net value of the investment (margin) = $4,000 + $2,000
Net value of the investment (margin) = $6,000
When Production decreases what is a very likely possibility? a hire new workers b expand production c purchase new equipment d downsizing
The correct answer is D. Downsizing
Explanation:
In businesses, the term "downsizing" is used to describe a reduction in the number of workers or the total labor force. This often means non-essential workers are fired or even complete departments are eliminated. Moreover, this is likely to occur if the business expenses are higher than its profits or if the production decreases because in both situations fewer workers are needed to eliminate unnecessary expenses. In this context, if production decreases it is likely downsizing occurs.
When preparing an income statement vertical analysis, each revenue and expense is expressed as a percent of net income.
A. True
B. False
You find a zero coupon bond with a par value of $10,000 and 14 years to maturity. The yield to maturity on this bond is 5.1 percent. Assume semiannual compounding periods. What is the price of the bond
Answer:
Bond Price = $4940.8468 rounded off to $4940.85
Explanation:
The price of a zero coupon bond is simply calculated by calculating the present value of the face value of the bond that the bond pays at maturity. The formula for the price of a zero coupon bond is,
Bond Price = Face Value / ( 1 + r )^n
Where,
r is the rate or YTM n is the number of periods left to maturityAssuming that the r or YTM is always stated in annual terms, the semi annual YTM will be 5.1% / 2 = 2.55%
Assuming semi annual compounding periods, the total number of periods or n will be,
n = 14 * 2 = 28
Bond Price = 10000 / (1 + 0.0255)^28
Bond Price = $4940.8468 rounded off to $4940.85
Suppose you invested in the Ishares High Yield Fund (HYG) a month ago. It paid a dividend of today and then you sold it for . What was your dividend yield and capital gains yield on the investment?
Complete Question:
Suppose you invested $100 in the Ishares High Yield Fund HYG your dividend yield and capital gains yield on the investment?
It paid a dividend of $2 today and then you sold it for $95. What was Dividend Yield and Capital Gains Yield on the investment?
Answer:
Dividend Yield is 2%
Capital Gains Yield is -5%
Explanation:
Dividend Yield:
We can calculate the Dividend Yield using the following formula:
Dividend Yield = D0 / Initial Stock Price
Here
D1 was Dividend paid just now and is $2 per share
Initial Stock Price before the dividend payment was $100 per share
By putting values, we have:
Dividend Yield = $2 per share / $100 per share = 2%
Capital Gains Yield:
We can find capital gains yield by using following formula:
Capital Gains Yield = (P1 - P0) / P0
Here
P1 is $95
P0 is $100
By putting values we have:
Capital Gains Yield = ($95 - $100) / $100 = -5%
Your client is 40 years old; and she wants to begin saving for retirement, with the first payment to come one year from now. She can save $5,000 per year; and you advise her to invest it in the stock market, which you expect to provide an average return of 9% in the future.
Answer:
14,000
Explanation:
im smart
Empirical evidence from 1960 to 2010 shows that convergence in economic growth is occurring in which of the following cases?
a. All low-income countries are catching up to all high-income countries.
b. Low-income industrial countries are catching up to high-income developing countries.
c. Low-income developing countries are catching up to high-income industrial countries.
d. Low-income industrial countries are catching up to high-income industrial countries.
Answer:
Correct Answer:
c. Low-income developing countries are catching up to high-income industrial countries.
Explanation:
The evidence which shows that low income developing countries are catching up to high-income industrial countries could be found in the series of developmental strides made by some countries like Rwanda, Kenya, Tanzania, Indonesia, Vietnam etc over the years. Most of their achievements is at par with most European countries in different sectors such as educational, and social sectors.
On July 1, 20Y7, Pat Glenn established Half Moon Realty. Pat completed the following transactions during the month of July:
A. Opened a business bank account with a deposit of $25,000 from personal funds.
B. Purchased office supplies on account, $1,850.
C. Paid creditor on account, $1,200.
D. Earned sales commissions, receiving cash, $41,500.
E. Paid rent on office and equipment for the month, $3,600.
F. Withdrew cash for personal use, $4,000.
G. Paid automobile expenses (including rental charge) for the month, $3,050, and miscellaneous expenses, $1,600.
H. Paid office salaries, $5,000.
I. Determined that the cost of supplies on hand was $950; therefore, the cost of supplies used was $900.
What would the Financial Statement look like?
Answer:
Explanation:
A) Debit cash 25,000 , credit capital 25,000
B)Credit Payable 1850 , Debit supplies 1850
C) Credit cash (1200), Debit payable (1200)
D) Debit cash 41,500 , credit sales commission 41,500
E)Credit cash (3600). debit rent 3,600
F)Credit cash ( 4000), debit drawings 4000
G)credit cash (4,650), debit automobile 3,050,miscellaneous 1600
H) Credit cash (5,000), debit salaries 5000
i)Credit supplies (900) debit supplies expense 900
Overall total
Cash = 25000-1200+41500-3600-4000=4650-5000 48,050
Supplies = 1850 -900 =950
Account payable = 1850-1200 =650
Capital = 25,000
Drawing =4000
Sales commission = 41,500
Salaries = 5,000
Rent = 3,600
Automobile expenses =3050
Miscellaneous expenses =1600
Supplies expenses = 900
Income statement
Revenue ( sales commission ) 41,500
Expenses
salaries 5,000
Rent 3,600
Supplies 900
Automobile 3,050
Miscellaneous 1,600
Total expenses 14,150
Gross profit 27,350
Statement of financial position
Assets
Cash 48,050
Supplies 950
Total 49,000
Liabilities
Account payable 650
Capital 25,000
Drawing (4000)
Total 21,650
Owners equity 27,350
Total liabilities and equities 49,000
Owners equity = ( sales commission - salaries - rent -supplies - automobile -miscellaneous )
The difference between total sales revenue and total cost of goods sold is the: A. Trade margin B. Gross marketing contribution C. Net marketing contribution D. All of the above
Answer:
A. Trade margin
Explanation:
The profit obtained from trading operations is known as gross profit or trade margin.This is calculated as sales less costs of goods sold.
The difference between total sales revenue and total cost of goods sold is the gross marketing contribution.
The following information is considered:
When the cost of goods sold is deducted from the sales revenue so the gross marketing contribution should come. Neither it is trade margin, nor net marketing contribution.In other words, the difference is called as gross margin.Therefore we can conclude that the correct option is B.
Learn more: brainly.com/question/16115373
Your supervisor instructs you to purchase 480 pens and 6 staplers for the workplace. Pens are purchased in sets of 6 for $2.45. Staplers are sold in sets of 2 for $14.95. How much will the purchase of these products cost?
Answer:
Total cost= $225.9
Explanation:
Giving the following information:
Your supervisor instructs you to purchase 480 pens and 6 staplers for the workplace.
Pens are purchased in sets of 6 for $2.45.
Staplers are sold in sets of 2 for $14.95.
First, we need to calculate the number of "packs" to buy:
Pens= 480/6= 80
Staplers= 6/2= 3
Total cost= 80*2.45 + 2*14.95= $225.9
A company with a WACC of 8.5% is considering two possible investments. Project A will return 10% and be financed using equity costing 9.5%. Project B will return 8% and be financed using debt costing 6%. Which project should the company undertake
Answer:
The Company should undertake project A.
Explanation:
The finance of projects is usually done through pooling of funds, that is using various sources of finance. The WACC represents the return required by providers of this finance and also shows the risk of the company.
A company will always accept projects that provide a return higher that their weighted average cost of capital (risk) and reject any project offering a return below the WACC.
Conclusion :
The Company should undertake project A as this gives a return higher than the WACC of 8.5%.
Q3) Creative Sports Design (CSD) manufactures a standard-size racket and an oversize racket. The firm’s rackets are extremely light due to the use of a magnesium-graphite alloy that was invented by the firm’s founder. Each standard-size racket uses 0.125 kilograms of the alloy and each oversize racket uses 0.4 kilograms; over the next two-week production period only 80 kilograms of the alloy are available. Each standard-size racket uses 10 minutes of manufacturing time and each oversize racket uses 12 minutes. The profit contributions are $10 for each standard-size racket and $15 for each oversize racket, and 40 hours of manufacturing time are available each week. Management specified that at least 20% of the total production must be the standard-size racket. How many rackets of each type should CSD manufacture over the next two weeks to maximize the total profit contribution? Assume that because of the unique nature of their products, CSD can sell as many rackets as they can produce.
Answer:
165 oversize rackets = 32 machine hours (79.71% of total production)
42 standard size rackets = 7 machine hours (20.29% of total production)
total profit contribution = (165 x $15) + (42 x $10) = $2,895
Explanation:
materials machine hours profit
standard size 0.125 kg 1/6 $10
oversize 0.4 kg 1/5 $15
constraints 80 kilograms of materials
40 hours of manufacturing
profit per machine hour:
standard size $10 x 6 = $60 x 40 hours = $2,400 (total possible production = 240 rackets)
oversize $15 x 5 = $75 x 40 hours = $3,000 (total possible production = 200 rackets)
profit per kilogram of alloy:
standard size $10 / 0.125 = $80 x 80 kgs = $6,400 (total possible production = 480 rackets)
oversize $15 / .4 = $37.50 x 80 hours = $3,000 (total possible production = 200 rackets)
since the most important constraint is the manufacturing hours available, the company should try to produce the products that yield the highest contribution margin per machine hour. In this case, at least 20% of total production must be standard size rackets, so the remaining 80% should be oversize rackets that yield a higher profit.
165 oversize rackets = 32 machine hours (79.71% of total production)
42 standard size rackets = 7 machine hours (20.29% of total production)
total manufacturing time = 40 hours
if we produce 166 oversize rackets and 41 standard size rackets, total manufacturing time will exceed 40 hours (40.03 hours exactly).
hich of the following is NOT one of the ways companies are using mobile apps? Group of answer choices track behavior across tablets and mobile devices utilize cookies to track mobile activity utilize GPS data to provide location-based offers track loyalty program participation add social value and entertainment to consumers' lives
Answer: Add social value and entertainment to consumers' lives
Explanation:
In this age of technology, companies have found that being able to offer their customers relevant products can be greatly helped by gathering information about them and offering it to them directly on their phones. A great way to do so is through the use of mobile apps.
With mobile apps a company can track behavior on the device as well as track mobile activity. They could even use the GPS capabilities of the phone through the app to offer relevant location based content.
However, as much as companies would like their customers to have enjoyable lives, this is not an aim with mobile apps. The apps are there to boost the companies sales not to add social value and entertainment to consumers' lives unless of course, that is the company's main business.
Answer:
Which features are created by wave erosion?
Your answer is:
- arches
- cliffs
- stacks
Explanation:
Onslow Co. purchases a used machine for $178,000 cash on January 2 and readies it for use the next day at a $2,840 cost. On January 3, it is installed on a required operating platform costing $1,160, and it is further readied for operations. The company predicts the machine will be used for six years and have a $14,000 salvage value. Depreciation is to be charged on a straight-line basis. On December 31, at the end of its fifth year in operations, it is disposed of.Required:Prepare journal entries to record the machine's disposal under each of the following separate assumptions: a. It is sold for $22,000 cash. b. It is sold for $88,000 cash. c. It is destroyed in a fire and the insurance company pays $32,500 cash to settle the loss claim.
Answer:
All the requirements are solved below
Explanation:
Purchase = $178,000
Ready to use cost = $2,480
Installation cost = $1,160
Salvage value = $14,000
Depreciation method = Straight line
Useful life = 6 years
Solution
Requirement A If sold for $22,000
Entry DEBIT CREDIT
Cash $22,000
Accumulated depreciation $140,000
Profit/loss on disposal $20,000
Machinery $182,000
Requirement B If sold for $88,000
Entry DEBIT CREDIT
Cash $82,000
Accumulated depreciation $140,000
Profit/loss on disposal $40,000
Machinery $182,000
Requirement C If destroyed in fire and insurance company paid $32,500
Entry DEBIT CREDIT
Cash $30,000
Accumulated depreciation $140,000
loss from fire $12,000
Machinery $182,000
Workings
Cost =$178,000 + $2,480 + $1,160
Cost = $182,000
Accumulated depreciation = ([tex]\frac{182,000-14,000}{6}x5[/tex]
Accumulated depreciation = 140,000
A project has estimated annual net cash flows of $56,600. It is estimated to cost $339,600.
Required:
Determine the cash payback period.
Answer:
It will take exactly 6 full years to cover for the initial investment.
Explanation:
Giving the following information:
Cash flow= $56,600
Initial investment= 339,600
The payback period is the time required for the cash flow to cover the initial investment:
Year 1= 56,600 - 339,600= -283,000
Year 2= 56,600 - 283,000= -226,400
Year 3= 56,600 - 226,400= -169,800
Year 4= 56,600 - 169,800= -113,200
Year 5= 56,600 - 113,200= -56,600
Year 6= 56,600 - 56,600= 0
It will take exactly 6 full years to cover for the initial investment.
