Answer:
D. The pressure of the gas decreases!
Explanation:
According to Boyle's Law, there is an inverse relationship between the volume of a gas and its pressure!
So, if the volume of a gas increases, its pressure will decrease; the same thing will happen if the pressure of the gas increases -- the volume will decrease!
↑P↓V and ↓P↑V <---- this is what it would look like visually!!
Hope this helps! :)
When the volume of a gas increases then the pressure of the gas decreases.
What is ideal gas equation?Ideal gas equation is a hypothesis which tells about the behavior of gas in different conditions and it will be represented as:
PV = nRT
From this equation it is clear that pressure and volume are inversely proportional to each other:
P ∝ 1/V
Means if pressure increases ten volume decreases or if pressure decreases then volume increases.
Hence option (4) is correct.
To know about ideal gas equation, visit the below link:
https://brainly.com/question/25290815
Which atom attracts electrons most strongly? br F Rb
Fluorine has the highest electronegativity in comparison to other elements therefore, the F atom attracts electrons most strongly.
What is electronegativity?The electronegativity of an atom measures the tendency of an element to attract the bonded electrons pairs towards itself. The electronegativity of an atom is determined with respect to another bonded atom.
Electronegativity can be described as a chemical property of an atom or a functional group to attract electrons toward itself. The electronegativity of an atom depends on the atomic number and the distance of valence electrons from the charged nuclei.
When two different atoms are bonded through a bond. More electronegative will attract the electron density of the bond towards itself.
As we know, the electronegativity decreases as we move down the group in the periodic table. Fluorine is the most electronegative element in the periodic table therefore, Fluorine (F) will attract the electrons toward it most strongly.
Learn more about electronegativity, here:
brainly.com/question/17762711
#SPJ6
sources of magnesium to plants
If the half life of iridium-182 is 15 years, how much of a 3 gram sample is left after 2 half-lives?
A) .57 grams
B) .70 grams
C) 2.25 grams
D) .75 grams
Answer:
D. 0.75 grams
Explanation:
The data given on the iridium 182 are;
The half life of the iridium 182, [tex]t_{(1/2)}[/tex] = 15 years
The mass of the sample of iridium, N₀ = 3 grams
The amount left, N(t) after two half lives is given as follows;
[tex]N(t) = N_0 \left (\dfrac{1}{2} \right )^{\dfrac{t}{t_{1/2}} }[/tex]
For two half lives, t = 2 × [tex]t_{(1/2)}[/tex]
∴ t = 2 × 15 = 30
[tex]\dfrac{t}{t_{(1/2)}} = \dfrac{30}{15} = 2[/tex]
[tex]\therefore N(t) = 3 \times\left (\dfrac{1}{2} \right )^2 = 0.75[/tex]
∴ The amount left, N(t) = 0.75 grams
Calculate weight of anhydrous compound from remains upon dehydration of 2g copper sulphate pentahydrate
Answer:
1.28 g
Explanation:
Mass of anhydrous compound/molar mass of anhydrous compound = mass of hydrated compound/ molar mass of hydrated compound
Mass of anhydrous compound = ?
Mass of hydrated compound = 2g
Molar mass of anhydrous compound= 160 g/mol
Molar mass of hydrated compound = 250 g/mol
x/160 = 2/250
250x = 2 ×160
x= 2 × 160/250
x= 1.28 g
Explain why the buffering action of these chemical reactions is limited by the present day rate of change for atmospheric CO2 concentration
Answer:
Due to increase in carbondioxide gas.
Explanation:
The buffering action of these chemical reactions is limited by the present day rate of change for atmospheric carbondioxide concentration because the the rate of atmospheric carbondioxide rises as compared to ancient atmospheric carbondioxide gas. Due to increase of human activities, the concentration of carbondioxide gas increases in the atmosphere which limits the buffering action of these chemical reactions so we can say that carbondioxide gas is responsible for its limited action.
A neutron collides with a nitrogen atom, resulting in a transmutation. Balance the equation.
on + '
NX+1H
Identify the unknown product by identifying the unknown letters.
Ais
Z is
X is
Answer:
The answer is ¹³₆C
Explanation:
searched it up
The formula for calclum chloride Is CaCl2. Which argument best describes the type of chemical bond that was formed between the calcium and chlorine atoms? An lonic bond because calcium is sharing its electrons with the chlorine. A covalent bond because calclum is transferring its electrons to the chlorine. A covalent bond because calcium is sharing its electrons with the chlorine. An lonic bond because calcium is transferring Its electrons to the chlorine.
Answer:
An lonic bond because calcium is transferring Its electrons to the chlorine.
Explanation:
Metals usually form compounds with non-metals through ionic bonding.
Metals are electropositive elements which form ions by the loss of electrons, whereas non-metals are electronegative elements which form ions by the gain of electrons.
Compounds are formed when two or more elements combine together. The formation of compounds involves formation of bonds which may be either ionic or covalent bonds.
The type of bonding that exists between the a metallic calcium atoms and non-metallic chlorine atoms in calcium chloride, CaCl₂, is ionic bonding. In the process of formation of the compound, calcium atoms which have a valency of 2 readily donates their two valence electrons to chlorine atoms to form calcium ions, Ca²+. Each chlorine atoms having a valency of 1 accepts an electron to form chloride ions Cl-. Two chlorine atoms accept the two electrons donated by a calcium ion. Due to strong electrostatic forces of attraction between the calcium ion and the two chloride ions, the ionic compound CaCl₂ is formed.
An inverse relationship can be represented by what?
Answer:
1/....
Explanation:
If we say acceleration 'a' is inversely proportional to mass 'm', then
a=1/m.
Explain why rubbing an alkali like bicarbonate of soda onto an acidic bee sting can ease the pain ?
Read the following graduated cylinder.
How many ML?
Answer:
12.8 mL
Explanation:
the bolded bar indicates a count of 5. counting from there would add up to 8/10ths of a mL.
Which of these is true for natural selection but not artificial selection?
A.Humans choose specific organisms to reproduce.
B.Competition for resources determines reproductive success.
C.Unfavorable traits decrease in frequency in a population.
D.Genetic engineering introduces new traits into a population.
Answer:
B
Explanation:
The radius of the large cylinder of a hydrolic press
20cm and that of the small cylinderis 5 cm. If a force of 100N is applied on the small piston Calculate the force on the large piston. if the piston of the small cylinder move through a distance of 0.4m through what distance can the large piston be raised
Answer: 1) 400N
2)1.6
Explanation:
1) 5cm = 100N of force
so
20cm=400n
2) 0.4 X 4 = 1.6
Find the area of the sector with a central angel of 120 and a radius of 8 inshces. Leave in terms of pie
Answer:
A = 66.98 square in.
Explanation:
The Area of a sector is given by the formula
[tex]A = \frac{\theta}{360}\times \pi r^2[/tex]
here θ is the central angle and r is the radius
given that θ = 120° and radius = 8 inches
[tex]A = \frac{120}{360}\times3.14\times 8^2[/tex]
A = 66.98 square in.
Why increasing the temperature of a gas would increase the volume of its container in gas law?
When the amount of gas in a container is increased, the volume increases. Lussac's law states that the pressure of a given amount of gas held at constant volume is directly proportional to the Kelvin temperature.
The reaction of hydrogen with nitrogen to produce ammonia is shown below. If there are 3 moles of nitrogen, how many moles of hydrogen are needed to react completely with the nitrogen?
Answer:
9
Explanation:
I took the same test :)
The stoichiometry is important in chemistry which helps us to use the balanced equation to calculate the amount of reactants and products. Here the moles of hydrogen needed is 9. The correct option is B.
What is stoichiometry?The quantitative study of the reactants and products involved in a chemical reaction is known as the chemical stoichiometry. The stoichiometric coefficients can be fractions including the whole numbers. It helps to establish the mole ratio.
The stoichiometric coefficient is basically the number which is present in front of the atoms, molecules or ions. The stoichiometric calculations are also used in gravimetry and volumetry.
Here the balanced equation for the reaction is:
N₂ + 3H₂ → 2NH₃
Number of moles of H₂ = 3 mol N₂× 3 mol H₂ / 1 mol N₂ = 9 mol H₂
So the number of moles of H₂ is 9.
Thus the correct option is B.
To know more about stoichiometry, visit;
https://brainly.com/question/29775083
#SPJ7
Pure hydrogen (H₂) is a hazardous substance. Thus, safer and more cost effective techniques have been developed to store it as a solid for shipping purposes. One such method is the reaction below, which occurs at 200 °C.
Answer: hello your question has some missing details attached below is the missing details
answer : 25.5% ( B )
Explanation:
Determine percentage yield
molar mass = 35 g/mol
mass of Li₃N(s) = 70 g
product LiH(s) = 8.0 g ( actual yield )
theoretical yield ( LiH ) = 4 * 7.95 = 31.8 g
percentage yield = actual yield * 100 / theoretical yield
= 8 * 100/31.8
= 25.5%
Please answer. Brainliest!
The equation is balanced.
Explanation:The number of P atoms in the reactant side is 4 and the number of P atoms in the product side is also 4.
The number of O atoms in the reactant side is 16 and the number of O atoms in the product side is also 16.
The number of H atoms in the reactant side is 12 and the number of H atoms in the product side is also 12.
These results are in accordance with the law of conservation of mass.
#ILoveChemistry
Which of these takes place when a chemical change occurs? option 1: Bonds connecting atoms in products and reactants form. option 2: Bonds connecting atoms in products and reactants break. option 3: Bonds connecting atoms in reactants break, and bonds connecting atoms in products form. option 4: Bonds connecting atoms in reactants form, and bonds connecting atoms in products break.
Answer: Out of the given options bonds connecting atoms in reactants break, and bonds connecting atoms in products form are the changes which takes place when a chemical change occurs.
Explanation:
A change that leads to the change in chemical composition of a substance is called a chemical change.
For example, [tex]2NH_{3} \rightarrow N_{2} + 3H_{2}[/tex]
Here, bond between the reactant atoms nitrogen and hydrogen is broken down.
On the other hand, bond connecting the products that is [tex]N_{2}[/tex] and [tex]H_{2}[/tex] is formed.
Thus,, we can conclude that out of the given options bonds connecting atoms in reactants break, and bonds connecting atoms in products form are the changes which takes place when a chemical change occurs.
Additional Activities
Direction: Sharpen your understanding in projectile motion. Calculate the maximum height reached and the horizontal range of the given launched angles and initial velocity of a projectile. You may opt to use the Projectile Motion Simulation with Air Friction by AERDEMIR which can be downloaded via Play Store for free.
1. To use the simulator, set the given values as shown in the left.
Start Angle = Launched Angle = refer to the table Start Velocity = Initial Velocity = 20 m/s
Change the gravitational acceleration to 9.8 only Delete the values in Air Density and Drag Coefficient
2. Deactivate the friction force by tapping the icon indicated in the above image.
The maximum height of an object, given the initial launch angle and initial velocity is found with:
h = v2 is in2θi 2g
h = v i 2 sin 2 θ i 2 g.
A certain atom has a mass of 16 and an atomic number of 7. What element is this ?
Answer:
Nitrogen
Explanation:
According to the Periodic Table, the atom with a mass is 16 but the Atomic number is 7 for Nitrogen. That means that Nitrogen is an isotope.
Which has more molecules in it 10g H, 0 or 10g NaCl*
A)010g of H0
B)10g of NaCl
C)They have the same number of molecules
D)Cannot be determined
Answer:
10 grams of hydrogen
Explanation:
How would the balloons interaction with each other change if the balloons were moved further apart? Explain.
Explanation:
It is known that like charges repel each other and unlike charges attract each other.
As the balloons are facing each other with like charges so they will repel each other. Hence, they will move apart.
But when balloons were moved further apart then interaction between them will decrease and then there will be no force of repulsion or force of attraction.
Al2S3 + 6H20 + 2Al(OH)2 + 3H2S
How many TOTAL number mole to mole ratios will there be total?
Answer:
the correct answer is 23:19
A curium-245 nucleus is hit with a neutron and changes as shown by the equation. Complete the equation by filling in the missing parts. 52 54 138 140 142 Xe Te Ce
The question is incomplete, the complete question is:
A curium-245 nucleus is hit with a neutron and changes as shown by the equation. Complete the equation by filling in the missing parts.
[tex]_{96}^{245}\textrm{Cm}+_0^1\textrm{n}\rightarrow _{42}^{103}\textrm{Mo}+_{r}^{q}\textrm{p}+3_0^1\textrm{n}[/tex]
Answer: The complete equation formed is [tex]_{96}^{245}\textrm{Cm}+_0^1\textrm{n}\rightarrow _{42}^{103}\textrm{Mo}+_{54}^{140}\textrm{Xe}+3_0^1\textrm{n}[/tex]
Explanation:
The general representation of an isotope is given as:
[rex]_Z^A\textrm{X}[/tex]
where,
A is the mass number, Z is the atomic number and X is the symbol of the element
In a nuclear reaction, total atomic number and total mass number on either side of the reaction remains the same
For the given chemical reaction:
[tex]_{96}^{245}\textrm{Cm}+_0^1\textrm{n}\rightarrow _{42}^{103}\textrm{Mo}+_{r}^{q}\textrm{p}+3_0^1\textrm{n}[/tex]
On the reactant side:
Total atomic number = [96 + 0] = 96
Total mass number = [245 + 1] = 246
On the product side:
Total atomic number = [42 + r + 0] = 42 + r
Total mass number = [103 + q + 3] = 106 + q
Calculating for 'r' and 'q', we get:
[tex]96= 42 + r\\\\r=96-42=54[/tex]
[tex]246 = 106+q\\\\q=246-106=140[/tex]
Thus, the missing isotope is [tex]_{54}^{140}\textrm{Xe}[/tex]
Hence, the complete equation formed is [tex]_{96}^{245}\textrm{Cm}+_0^1\textrm{n}\rightarrow _{42}^{103}\textrm{Mo}+_{54}^{140}\textrm{Xe}+3_0^1\textrm{n}[/tex]
Answer: try 140 52 xe
Explanation:
Write a nuclear equation for the beta decay of Promethium-165
Answer:
see your answer in pic
Explanation:
There can be emissions of radiations like gamma radiation. There can be emission of particles too like alpha particle. Therefore, the nuclear equation for the beta decay of Promethium-165 is
¹⁶⁵Pm[tex]\rightarrow[/tex]⁰e₋₁ + ₆₂Sm¹⁶⁵
What is nuclear decay?Nuclear decay is process in which the radioactive element releases particles or radiations. Alpha particles is ⁴₂He. Alpha particle is nothing but helium particle. The kinetics that is related to nuclear decay is of first order.
The nuclear equation for the beta decay of Promethium-165 is
¹⁶⁵Pm[tex]\rightarrow[/tex]⁰e₋₁ + ₆₂Sm¹⁶⁵
Beta decay of Promethium-165 is the emission of electron particle from the given isotope. the product is Samarium ₆₂Sm¹⁶⁵.
Therefore, the nuclear equation for the beta decay of Promethium-165 is
¹⁶⁵Pm[tex]\rightarrow[/tex]⁰e₋₁ + ₆₂Sm¹⁶⁵
To know more about nuclear decay, here:
https://brainly.com/question/21114779
#SPJ2
Vhon Anadome
Atomic nucleus questions
Which of the following decay processes results in the largest change in mass of a nucleus?
Choose 1 answer:
А
Beta decay
Gamma decay
Neutron emission
D
Alpha decay
Answer:
d
Explanation:
Please help! I don't know how to do and want to understand
2. Which element below would be the best choice when creating a covalent molecule with an
Oxygen atom?
A. Na
B. Mg
C. Ne
D. O
What can a nation do to improve the exchange rate of its currency?
A.
try to improve its balance of trade
B.
try to decrease its trade surplus
C.
try to lower its gross domestic product (GDP)
D.
try to export less while importing more
Answer:
A
Explanation:
balance the trades and improving them
Answer:
A:try to improve it's balance of trade
Explanation:
If 0.654 g of oxygen dissolves in 1.5 L of water at 1.65 atm, at what pressure (in atm) would you be able to dissolve 1.35 g in the same amount of water?
Explanation:
dylalove464
06/11/2020
Hello,
In this case, we first compute the moles of oxygen in 0.654 g and 1.35 g by using its molar mass (32 g/mol):
Then, by using the ideal gas equation at the both states, given the same both temperature and volume:
We compute the volume at the second moles:
Best regards.
Answer:
3.41
Explanation:
:)
