Answer:
option a and c both are correct
Explanation:
please mark me as brainliest
The pairs of compounds have the same empirical formula are:
a. acetylene, C₂H₂, and benzene, C₆H₆ and
c .nitrogen dioxide, NO₂, and di nitrogen tetroxide, N₂O₄
What is empirical formula?The empirical formula of a compound is defined as the formula that shows the ratio of elements present in the compound, but not the actual numbers of atoms found in the molecule.
In some cases, the empirical formula is the same as the molecular formula, which gives the actual number of atoms in a compound (e.g., H₂O).Otherwise, the molecular formula is a multiple of the empirical formula (e.g., CH₂O is the empirical formula for glucose, C₆H₁₂O₆).
Examples of empirical formulas:
Glucose has a molecular formula of C₆H₁₂O₆. It contains 2 moles of hydrogen for every mole of carbon and oxygen. The empirical formula for glucose is CH₂O.
The molecular formula of ribose is C₅H₁₀O₅, which can be reduced to the empirical formula CH₂O.
The pair with empirical formula is acetylene, C₂H₂, and benzene, C₆H₆ and
nitrogen dioxide, NO₂, and di nitrogen tetroxide, N₂O₄
Thus, option (A) and (C) are correct.
To learn more about empirical formula, refer to below link:
https://brainly.com/question/14044066
#SPJ2
Question 10 of 10 A certain seed is surrounded by a sticky coating. It is fairly dense and does not float in water. How is this seed most likely spread?
A. It is dispersed by the wind, and it sprouts after it falls to the ground
B. It drops to the bottom of a body of water, where it sprouts.
C. It attaches to the fur of an animal, and it sprouts after it falls from the animal's fur.
D. Animals eat it, and it is deposited in their waste.
Which equation describes a physical change? i. H2O(s) ⟶ H2O(l) ii. Na+(aq)+Cl−(aq) +Ag+(aq)+NO3−(aq) ⟶ AgCl(s)+Na+(aq)+NO3−(aq) iii. CH3OH(g)+O2(g) ⟶ CO2(g)+H2O(g) iv. 2H2O(l) ⟶ 2H2(g)+O2(g) v. H+(aq)+OH−(aq)⟶ H2O(l)
Answer:
The answer is "Option i"
Explanation:
In this question, only option (i) is correct, and others were wrong which can be defined as follows:
In option (ii):
[tex]Na^+\ (aq)+Cl^- \ (aq) +Ag^+ \ (aq)+NO_3^- \ (aq) \to AgCl\ (s)+Na^+ \ (aq)+NO_3^-\ (aq) \\\\[/tex]
It is the complete ionic equation.
In option (iii):
[tex]CH_3OH\ (g)+O_2\ (g) \to CO_2\ (g)+H_2O\ (g)[/tex]
It is the combustion reaction but a not balanced equation.
In option (iv):
[tex]2H_2O\ (l) \to 2H_2\ (g)+O_2\ (g)[/tex]
It is the decomposition equation.
In option (v):
[tex]H^+\ (aq) +OH^-\ (aq)\to H_2O\ (l)[/tex]
It is the complete ionic equation.
7. What measures are applicable in the context of Nepal to push energy crisis further. Describe any three points clearly.
Answer:
which energy?........
Explanation:
..........................
........
....
Assertion: Atomic mass of aluminium is 27 Reason: An atom of aluminium is 27 times heavier than 1 / 12th of the mass of the C – 12 atoms.
Answer:
i is the correct answer.
Explanation:
the RAM of aluminum is indeed 27. And since the RAM of substances are measured in terms of the C-12 isotope then R indeed explains why the RAM Al is 27.
What is known about a reaction with a positive enthalpy?
Answer:
"Endothermic reaction: In an endothermic reaction, the products are higher in energy than the reactants. Therefore, the change in enthalpy is positive, and heat is absorbed from the surroundings of the reaction."
Explanation:
When enthalpy is positive and delta H is greater than zero, this means that a system absorbed heat. This is called an endothermic reaction. When enthalpy is negative and delta H is less than zero, this means that a system released heat. This is called an exothermic reaction.
What does a high positive enthalpy mean?
The sign of q for an endothermic process is positive because the system is gaining heat. A chemical reaction or physical change is exothermic if heat is released by the system into the surroundings. Because the surroundings are gaining heat from the system, the temperature of the surroundings increases.
Learn more about the endothermic reaction here: brainly.com/question/6506846
#SPJ2
I need help with b) c) and what is the electronic configuration of atom E
Answer:
(b) A and C belongs to same group.
(c) D is a non metal.
Explanation:
The Electronic Configuration of E is
[tex]1s {}^{2} 2s {}^{2}2p {}^{6} 3s {}^{2} 3p {}^{6} 4s {}^{2} [/tex]
Why doesn’t the KHP concentration have to be exactly 0.100M? Explain using complete sentences.
Answer:
The answer is in the explanation.
Explanation:
The KHP is an acid used as standard in titrations to find concentration of bases as NaOH.
The reaction that explain this use is:
KHP + NaOH → KNaP + H2O
where 1 mole of KHP reacts per mole of NaOH
That means, at equivalence point of a titration in which titrant is NaOH, the moles of KHP = Moles of NaOH added
With the moles of KHP = Moles of NaOH and the volume used by titrant we can find the molar concentration of NaOH.
The moles of KHP are obtained from the volume and the concentration as follows:
Volume(L)*Concentration (Molarity,M) = moles of KHP
If the concentration is more or less than 0.100M, the moles will be higher or lower. For that reason, we need to know the concentration of KHP but is not necessary to be 0.100M.
Question 2 Multiple Choice Worth 2 points)
(01.01 LC)
Which of the following is a characteristic of science?
O Reproducible by other scientists
The personal opinion of the scientist
Using vanable conditions for each test
O Including only the data that supports a hypothesis
Question 3 Multiple Choice Worth 2 points)
Answer:
Reproducible by other scientists
The personal opinion of the scientist
Using vanable conditions for each test
Explanation:
Which of the following is a common property of both strong acid and strong base?
a. They are good electrolytes
b. They are non-electrolytes
c. They are weak electrolytes
d. They are sour in test
Answer:
They are good electrolytes
Identify an element as a metal or a non-metal according to its position in the Periodic
Table
Answer:
Metals on the left of the Periodic Table.
Non-Metals on the top-right, plus Hydrogen.
Identify each of the highlighted materials as an element, a compound, or a mixture, and explain your reasoning.
Answer:
These are compounds.
Explanation:
As it is formed by chemically bonding of two elements C ( carbon) and H (hydrogen) .
Its not a mixture because mixture is Just dispersed of diferrent elements or a compound which are not in fix ratioAnswer:
Butane and benzene are both compounds. They contain multiple elements bonded together in a specific ratio. Kerosene and gasoline are mixtures because they are combinations of several compounds. Oxygen is an element because it is made up of only one type of atom.
Explanation:
PLZ HELP ME WITH MY WORK
Answer:
Explanation:
pretty sure its mixure.
Describe the principle and process for the manufractured of sulphuric acid witha a well labeled diagram by contact process.
The steps involved in the manufacture of sulphuric acid by contact process:
(1) Sulphur (or iron pyrites) are burnt in air to form sulphur dioxide.
S+O2→SO24FeS2+11O2→2Fe2O3+8SO2
(2) Catalytic oxidation of sulphur dioxide to sulphur trioxide.
2SO2+O2V2O52SO3ΔrHo=−196.6kJ
The reaction is reversible and exothermic.
(3) Sulphur trioxide is dissolved in 98% sulphuric acid to form oleum (fuming sulphuric acid).
SO3+H2SO4→H2S2O7
(4) Oleum is diluted with water to form sulphuric acid of desired concentration.
H2S2O7+H2O→2H2SO4
and
Manufacture of H2SO4 by contact process involves three steps:
1. Burning of sulphur in air to generate SO2.
2. Conversion of SO2 to SO3 by oxidation with air in the presence of
Mercury poisoning is a debilitating disease that is often fatal. In the human body, mercury reacts with essential enzymes leading to irreversible inactivity of these enzymes. If the amount of mercury in a polluted lake is 0.4 Hg/mL, what is the total mass in kilograms of mercury in the lake
Answer:
The total mass of mercury in the lake is 631,542.7 kg
Explanation:
Question: The given dimensions of the lake as obtained from a similar question posted online are;
The surface area of the lake, A = 100 mi²
The lake's average depth, d = 20 ft.
The concentration of the mercury, C = 0.4 μg Hg/mL = 0.4 × 10⁻⁶ kg Hg/L
Therefore, we have;
The volume of water mixture in the lake, V = A × d
∴ V = 100 mi² × 20 ft. = 2,787,840,000 ft.² × 20 ft. = 55,756,800,000 ft.³
1 ft³ = 28.31685 L
∴ 55,756,800,000 ft.³ = 55,756,800,000 ft.³ × 28.31685 L/ft.³ = 1.57885675 × 10¹² L
The total mass of mercury in the lake, m = C × V
∴ m = 0.4 × 10⁻⁶ kg Hg/L × 1.57885675 × 10¹² L = 631,542.7 kg
The total mass of mercury in the lake, m = 631,542.7 kg.
Which sentence describes existing cells?
All cells, once formed, continue to live forever.
All cells come from previously existing cells.
All the cells that are on Earth have always been here.
All cells develop from the remains of other cells.
write an importance of endothermic reactions
Answer:
the uses of exothermic reactions are:
1) lighting of stove
2) self heating cans
3) hand warmers
4) in some case exothermic process can be used to cook food such as rice (by adding calcium oxide to water heat is evolved and it helps to cook food )
Explanation:
hope this helps you pls mark me as brainilst
what apparatus is used to investigate the conductivity of solutions
[tex]v=0.164m*8.3cm*12.4cm[/tex]
Answer:
helloooo
0.164m * 100 = 16.4 cm
now multiplying all of em
v = 1,687.888
50. Carbon mono-oxide can be prepared by heating following substance with Conc. H2SO4. a. Oxalic acid b. Acetic acid c. Ethanoic acid d. All ic 252
A
Carbon monoxide gas can be prepared in lab by heating formic acid or oxalic acid with conc. H2SO4.
Procedure: Small amount of oxalic acid crystal is taken in a round- bottomed flask and all the apparatus are fitted as shown in figure. When conc. H2SO4 is poured in the flask through thistle funnel and heated then a mixture of CO and CO2 gas is formed. The mixture of gas is passed through a bottle containing NaOH solution where the CO2 gas is absorbed by NaOH.
2NaOH + CO2 → Na2CO3 + H2O
The pure CO gas is then collected in a gas jar by downward displacement of water.
Tenemos una disolución de HNO3 cuya pureza es del 65% y tiene una densidad de 1.32 g/mL. ¿Cuál es la molaridad de la disolución? PM HNO3 = 63.0 g/mol.
Teniendo en cuenta que la molaridad es el número de moles de soluto que están disueltos en un determinado volumen, la molaridad de la disolución de HNO₃ es 14.67 [tex]\frac{mol}{L}[/tex].
El porcentaje en masa o en peso de una disolución es el número de gramos de soluto que hay por cada 100 gramos de disolución.
Entonces una pureza de 65% indica que hay 70 g de HNO₃ puro por cada 100 g de HNO₃ impuro.
Por otro lado, la densidad es la relación entre el peso o masa de una sustancia y el volumen que ocupa esa misma sustancia.
Entonces, si la disolución de HNO₃ tiene una densidad de 1.32 g/mL (equivalente a 1320 g/L), donde la cantidad de masa es impura, se puede obtener la cantidad de masa de HNO₃ presente 1 L de la solución mediante el siguiente cálculo:
[tex]\frac{1320 g HNO_{3} impuro}{1 L}x \frac{70 g HNO_{3}puro}{100 g HNO_{3}impuro}= 924 \frac{g HNO_{3}puro}{L}[/tex]
Finalmente, la masa molar de HNO₃, es decir la masa presente en un mol de la sustancia, es 63 [tex]\frac{g}{mol}[/tex].
Entonces, teniendo en cuenta que la molaridad es el número de moles de soluto que están disueltos en un determinado volumen, es posible determinar la molaridad como:
[tex]\frac{924 g HNO_{3}puro}{L}* \frac{1 mol}{63 g}= 14.67 \frac{mol}{L}[/tex]
En resumen, la molaridad de la disolución es 14.67 [tex]\frac{mol}{L}[/tex]
Aprende más sobre la molaridad:
https://brainly.com/question/17647411?referrer=searchResultshttps://brainly.com/question/21276846?referrer=searchResultsPlsss help with this ASAP TT
Answer: lithium- 3 protons, 3 electrons, 3 neutrons
Oxygen- nucleon no. 16, Atomic no. 8, 8 protons, overall charge (-2)
Sorry I don't the others. Hope this helps
Can someone plz help me :<
Answer: cats r alliens because they r kind of like ufos they would usually wonder around rather u know it or not when they spy on us it could b with us sleep cooking anything so they r like aliens
Explanation:
distinguish between sugar and non-sugar with examples.
Answer:
Reducing sugars are sugars where the anomeric carbon has an OH group attached that can reduce other compounds. Non-reducing sugars do not have an OH group attached to the anomeric carbon so they cannot reduce other compounds. ... Maltose and lactose are reducing sugars, while sucrose is a non-reducing sugar
True or false, The four units that must always be used when using the ideal gas are 44.0 liters
Answer:
for volume only liters can be used
Explanation:
At what approximate temperature and pressure can all three phases of water exist simultaneously?
0°C, 760 mmHg
0°C, 5 mmHg
80°C, 380 mmHg
100°C, 760 mmHg
Answer:
0⁰c , 5 mmHg
Explanation:
Because at this temperature we all know water can be in state of both solid and liquid and when pressure is decreased it can be in form of gas too
If 16.4 grams of calcium nitrate is heated as shown in the reaction:
2Ca(NO3)2 -> 2CaO + 4NO2 + O2.
Calculate the volume of nitrogen dioxide produced at STP.
Answer:
7.2
Explanation:
you first have to find the number of moles of nitrogen dioxide by using the number of moles for calcium nitrate and the mole to mole ratios
number of moles of calcium nitrate=mass/mm
=16.4/102
=0.16g/mol
then you use the mole to mole ratios
2 : 4
0.16: x
2x/2=0.64/2
x=0.32g/moles of nitrogen dioxide
then you use the formula for the volume
v=22.4n
=22.4×0.32
=7.2
I hope this helps
the element of group 1 are reactive but those of group 18 are inert, why
Answer:
Because elements of group 1 does not have stable electronic configuration and elements of group 18 have stable electronic configuration.
Explanation:
Because elements of group 1 do not contain stable electronic configuration and elements of group 18 include stable electronic configuration.
What are the element of group 1?Group 1 elements contain the alkali metals, Li, Na, K, Rb, Cs, and Fr. The alkali metals exist all soft, shiny, and metallic when cut. They react efficiently with water, have low melting points and densities, and are good conductors of electricity. They all include one valence electron that they lose easily to form ions. Noble gas exists as any of the seven chemical elements that create up Group 18 (VIIIa) of the periodic table. The elements exist as helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn), and oganesson (Og).
The element of group 1 exist as reactive but those of group 18 exist as inert Because elements of group 1 do not contain stable electronic configuration and elements of group 18 include stable electronic configuration.
To learn more about element of group1 refers to:
https://brainly.com/question/2116245
#SPJ2
What process is used to refine aluminum from its ore bauxite?
A. Electrolysis
B. Electrolytic oxidation
C. Voltaic cell processing
D. Smelting
The correct option for the process used to refine aluminum from its bauxite ore is option D.
D. Smelting
The reason why smelting is the correct choice is as follows;
Bauxite is the aluminum ore from which alumina, also known as aluminum
oxide, Al₂O₃, is produced. Bauxite is extracted from the topsoil regions of
some subtropical and tropical regions, and the Bayer process is primarily
then used to produce alumina from the bauxite.
Aluminum is produced from the alumina by an aluminum smelting process
known as the Hall—Heroult electrolytic process which involves the use of a
carbon anode and direct current to produce aluminum by reducing the
aluminum oxide
Learn more about smelting process here:
https://brainly.com/question/3444206
differentiate between Physical and chemical changes
Answer:
In a physical change the appearance or form of the matter changes but the kind of matter in the substance does not. However in a chemical change, the kind of matter changes and at least one new substance with new properties is formed.
I HOPE THIS WILL HELP YOU IF NOT THEN SORRY HAVE A GREAT DAY:)Is water the only liquid? If not, name 5 more
Answer:
Is water the only liquid? If not, name 5 more
Water, ethanol, household bleach, blood, paint, milk, gasoline, mineral oil, acetone and butyl alcohol are examples of liquids. Liquids' properties allow them to flow or be poured easily into containers, lava
water is not the only liquid.
Answer:
apple juice, milk, smoothie, blood, urine
