Which of the following regions of the electromagnetic spectrum have longer wavelengths than visible light? 1. infrared radiation 2. ultraviolet radiation 3. microwave radiation

Answer:

The distance is [tex]d = 193.6 \ m[/tex]

Explanation:

From the question we are told that

   The time interval between the sounds is  k[tex]t_1 = k + t_2[/tex] =  0.50 s

    The  speed of sound in air is  [tex]v_s = 343 \ m/s[/tex]

    The  speed of sound in the concrete is [tex]v_c = 3000 \ m/s[/tex]

Generally the distance where the collision occurred is  mathematically represented as

          [tex]d = v * t[/tex]

Now from the question we see that d is the same for both sound waves

 So

        [tex]v_c t = v_s * t_1[/tex]

Now  

So [tex]t_1 = k + t[/tex]

      [tex]v_c t = v_s * (t+ k)[/tex]

=>     [tex]3000 t = 343* (t+ 0.50)[/tex]

=>    [tex]3000 t = 343* (t+ 0.50)[/tex]

=>    [tex]t = 0.0645 \ s[/tex]

So

     [tex]d = 3000 * 0.0645[/tex]

     [tex]d = 193.6 \ m[/tex]

Answer:

The vision becomes blurred due to the refractive defects of the eye. There are mainly three common refractive defects of vision. These are (i) myopia or near-sightedness, (ii) Hypermetropia or far – sightedness, and (iii) Presbyopia. These defects can be corrected by the use of suitable spherical lenses.

Answer:

Explanation:

If a sample emits 2000 counts per second when the detector is 1 meter from the sample, then;

2000 counts per second = 1 meter ... 1

In order to know the number of counts per second that would be observed when the detector is 3 meters from the sample, we will have;

x count per second = 3 meter ... 2

Solving the two expressions simultaneously for x we will have;

2000 counts per second = 1 meter

x counts per second = 3 meter

Cross multiply to get x

2000 * 3 = 1* x

6000 = x

This shows that 6000 counts per second would be observed when the detector is 3 meters from the sample

Answer:

The  period is [tex]T = 0.00255 \ s[/tex]

Explanation:

From the question we are told that

  The  frequency is  [tex]f = 392 \ Hz[/tex]

Generally the period is mathematically represented as  

           [tex]T = \frac{1}{f}[/tex]

=>       [tex]T = \frac{1}{ 392}[/tex]

=>       [tex]T = 0.00255 \ s[/tex]

Answer:

Explanation:

Friction is defined as a force which acts at the surface of separation between two objects in contact and tends to oppose motion of one over the other.

While kinetic friction is the force that must be overcome so that a body can move with uniform speed over another.

Hence let consider one of the laws of friction which states that: '' Frictional force is independent of the area of the surfaces in contact.''

The value did not vary with area. This is because when calculating the kinetic fiction, the total contact area is not relevant and only the total weight of the system as well of as the block is put into consideration.

Answer:

Will be equal to alpha x r; less than UsN

Answer:

82.2 mL

Explanation:

The process of adding water to a solution to make it more dilute is known as dilution. The formula for dilution is;

C1V1=C2V2

Where;

C1= concentration of stock solution

V1= volume of stock solution

C2= concentration of dilute solution

V2= volume of dilute solution

V2= C1V1/C2

V2= 1.48 × 55.6/ 1.0

V2= 82.2 mL

Answer:

450 x10^-6 T

Explanation:

We know that the magnetic of each wire is derived from

ByB= uoi/2pir

Thus B1= 4 x 3.14 x 10^-7 x50/( 2 x 3.142x 0.05)

= 0.2 x 10^ -3T

B2=

4 x 3.14 x 10^-7 x80/( 2 x 3.142x 0.04)

= 0.4 x 10^ -3T

So

(Bnet)² = (Bx)² + ( By)²

= (0.2² + 0.4²)mT

= 450 x10^-6T

The magnitude of magnetic field at the origin is required.

The magnitude of resulting magnetic field at origin is [tex]447.2\ \mu\text{T}[/tex]

x = Location at x axis = 5 cm

y = Location at y axis = 4 cm

[tex]I_x[/tex] = Current at the x axis point = 50 A

[tex]I_y[/tex] = Current at the y axis point = 80 A

[tex]\mu_0[/tex] = Vacuum permeability = [tex]4\pi\times 10^{-7}\ \text{H/m}[/tex]

Magnitude of the magnetic field is given by

[tex]B=\dfrac{\mu_0I}{2\pi r}[/tex]

Finding the net magnetic field using the Pythagoras theorem

[tex]B^2=B_x^2+B_y^2\\\Rightarrow B^2=\left(\dfrac{\mu_0I_x}{2\pi x}\right)^2+\left(\dfrac{\mu_0I_y}{2\pi y}\right)^2\\\Rightarrow B=\dfrac{\mu_0}{2\pi}\sqrt{\left(\dfrac{I_x}{x}\right)^2+\left(\dfrac{I_y}{y}\right)^2}\\\Rightarrow B=\dfrac{4\pi\times 10^{-7}}{2\pi}\sqrt{\left(\dfrac{50}{0.05}\right)^2+\left(\dfrac{80}{0.04}\right)^2}\\\Rightarrow B=0.0004472=447.2\ \mu\text{T}[/tex]

The magnitude of resulting magnetic field at origin is [tex]447.2\ \mu\text{T}[/tex]

Learn more:

https://brainly.com/question/14573987?referrer=searchResults

Answer:

Time, [tex]t=1.07\times 10^{-23}\ s[/tex]

Explanation:

Given that,

When a high-energy proton or pion traveling near the speed of light collides with a nucleus, it may travel [tex]3.2\times 10^{-15}\ m[/tex] before interacting.

Let t is the time interval required for the strong interaction to occur. It will move with the speed of light. So,

[tex]t=\dfrac{d}{c}\\\\t=\dfrac{3.2\times 10^{-15}}{3\times 10^8}\\\\t=1.07\times 10^{-23}\ s[/tex]

So, the time interval is [tex]1.07\times 10^{-23}\ s[/tex]

Answer:

1. Energy: ultraviolet>> visible> infrared

2. Frequency: ultraviolet>> visible > infrared

3. Wavelength: infrared >> visible > ultraviolet

Explanation:

Electromagnetic waves are a class of waves that do not require material medium for their propagation, and travel at the same speed. They are arranged with respect to either their decreasing wavelength or increasing frequency to form a spectrum called an electromagnetic spectrum.

Comparing the energy, frequency and wavelength of ultraviolet, infrared and visible regions, it can be deduced that:

1. Energy: ultraviolet has the highest energy, then followed by visible, and infrared has the lowest energy.

i.e energy: ultraviolet>> visible> infrared

2. Frequency: ultraviolet radiation has the highest frequency, visible region has a greater frequency than that of infrared.

i.e frequency: ultraviolet>> visible > infrared

3. Wavelength: infrared radiation has the highest wavelength, followed by visible region, and ultraviolet radiation has the lowest wavelength.

i.e  wavelength: infrared >> visible > ultraviolet

In terms of lowest to the highest energy,frequency, and wavelength is;

Energy: infrared > visible light > ultraviolet

Frequency: infrared > visible light > ultraviolet

Wavelength: ultraviolet > visible light > infrared

The electromagnetic spectrum is made up of all the electromagnetic waves (ultraviolet, infrared, and visible) arranged according to their energy,frequency, and wavelength.

Learn more about electromagnetic spectrum here:

https://brainly.com/question/13803241

Answer:

counterclockwise

Explanation:

given data

area = 25 cm²

solution

We know that a changing magnetic field induces the current and induced emf is express as

[tex]\epsilon = -N \frac{d \phi }{dt}[/tex]     ..................................1

and we will get here direction of the induced current in the loop that is express by the Lens law that state that the direction of induces current is such that the magnetic flux due to the induced current opposes the change in magnetic flux due to the change in magnetic field

so when magnetic field decrease and point coming out of the paper.

so induced current in the loop will be counterclockwise

Answer:

[tex]B=2.74\times 10^{-10}\ T[/tex]

Explanation:

It is given that,

A planar electromagnetic wave is propagating in the +x direction.The electric field at a certain point is, E = 0.082 V/m

We need to find the magnetic vector of the wave at the point P at that instant.

The relation between electric field and magnetic field is given by :

[tex]c=\dfrac{E}{B}[/tex]

c is speed of light

B is magnetic field

[tex]B=\dfrac{E}{c}\\\\B=\dfrac{0.082}{3\times 10^8}\\\\B=2.74\times 10^{-10}\ T[/tex]

So, the magnetic vector at point P at that instant is [tex]2.74\times 10^{-10}\ T[/tex].

The magnetic vector of the wave at the point P at that instant is [tex]2.73 \times 10^{-10}T[/tex]

The formula relating electric field and the magnetic field is given as;

[tex]c=\frac{E}{B}[/tex]

From the formula shown:

[tex]B=\frac{E}{c}\\B=\frac{0.082}{3.0\times 10^8}\\B=2.73 \times 10 ^{-10}T[/tex]

Hence the magnetic vector of the wave at the point P at that instant is [tex]2.73 \times 10^{-10}T[/tex]

Learn more on magnetic field here: https://brainly.com/question/21040756

Answer:

In an electromagnetic wave in free space, the ratio of the magnitudes of electric and magnetic field vectors E and B is equal:  speed of light(c)

Explanation:

Generally the ratio of the E(electric field ) and  the B(magnetic field ) is  equal to the speed of the electromagnetic wave i.e the speed of  light (c) the value is

    [tex]c = 3.0 *10^{8} \ m/s[/tex]

Answer:

N2 = ¼N1

Explanation:

First of all, let's define the terms;

N1 = number of electric field lines going through the sphere of radius R

N2 = number of electric field lines going through the sphere of radius 2R

Q = the charge enclosed at the centre of concentric spheres

ε_o = a constant known as "permittivity of the free space"

E1 = Electric field in the sphere of radius R.

E2 = Electric field in the sphere of radius 2R.

A1 = Area of sphere of radius R.

A2 = Area of sphere of radius 2R

Now, from Gauss's law, the electric flux through the sphere of radius R is given by;

Φ = Q/ε_o

We also know that;

Φ = EA

Thus;

E1 × A1 = Q/ε_o

E1 = Q/(ε_o × A1)

Where A1 = 4πR²

E1 = Q/(ε_o × 4πR²)

Similarly, for the sphere of radius 2R,we have;

E2 = Q/(ε_o × 4π(2R)²)

Factorizing out to get;

E2 = ¼Q/(ε_o × 4πR²)

Comparing E2 with E1, we arrive at;

E2 = ¼E1

Now, due to the number of lines is proportional to the electric field in the each spheres, we can now write;

N2 = ¼N1

Answer:

The final temperature is 61.65 °C

Explanation:

mass of copper pot [tex]m_{c}[/tex] = 2 kg

temperature of copper pot [tex]T_{c}[/tex] = 20 °C  (the pot will be in thermal equilibrium with the room)

specific heat capacity of copper [tex]C_{c}[/tex]= 385 J/kg-°C

The heat content of the copper pot = [tex]m_{c}[/tex][tex]C_{c}[/tex][tex]T_{c}[/tex] = 2 x 385 x 20 = 15400 J

mass of boiling water [tex]m_{w}[/tex] = 200 g = 0.2 kg

temperature of boiling water [tex]T_{w}[/tex] = 100 °C

specific heat capacity of water [tex]C_{w}[/tex] = 4182 J/kg-°C

The heat content of the water = [tex]m_{w}[/tex][tex]C_{w}[/tex][tex]T_{w}[/tex] = 0.2 x 4182 x 100 = 83640 J

The total heat content of the water and copper mix [tex]H_{T}[/tex] = 15400 + 83640 = 99040 J

This same heat is evenly distributed between the water and copper mass to achieve thermal equilibrium, therefore we use the equation

[tex]H_{T}[/tex] =   [tex]m_{c}[/tex][tex]C_{c}[/tex][tex]T_{f}[/tex] + [tex]m_{w}[/tex][tex]C_{w}[/tex]

where [tex]T_{f}[/tex] is the final temperature of the water and the copper

substituting values, we have

99040 = (2 x 385 x [tex]T_{f}[/tex]) + (0.2 x 4182 x

99040 = 770[tex]T_{f}[/tex] + 836.4

99040 = 1606.4[tex]T_{f}[/tex]

[tex]T_{f}[/tex] = 99040/1606.4 = 61.65 °C

Answer:

Explanation:

change in magnetic flux = .16 x .16 x .510 - 0

= .013056 weber .

rate of change of flux = change in flux / time

= .013056 / 40.5 x 10⁻³

= .32237

voltage induced = .32237 V

electrical energy dissipated = v² / R where v is voltage , R is resistance

= .32237² / 6.35

= 16.36 x 10⁻³ J .

Answer:

24.34 m/s

Explanation:

recall that one of the equations of motions takes the form:

v = u + at

where,

v = final velocity

u = initial velocity (given as 22.2 m/s)

a = acceleration (given as 2.68m/s²)

t = time elapsed during acceleration (given as 0.80s)

since we are told that the the acceleration is in the direction of the intial velocity, we can simply substitute the known values into the equation above:

v = u + at

v = 22.2 + (2.68) (0.8)

v = 24.34 m/s

Answer:

a. Moon around Earth.

Explanation:

Charon orbit takes around 6.4 earth days to complete its orbit. Charon does not rises or sets, it hovers over same spot around the Pluto. The same side of Charon faces the Pluto, this is called Tidal Locking.

The moon orbit takes around 27 days to complete its orbit. The moon has different sides that are faced with sun which creates light or dark face of moon on the earth. Moon has 384,400 km distance from the earth.

The object that should exhibit the longest orbital period is option a. Moon around Earth.

Charon's orbit takes around 6.4 earth days to finish its orbit. Charon does not rise or sets, it hovers over similar spot around Pluto. The same side of Charon faces Pluto, this we called Tidal Locking. Here the moon orbit should take approx 27 days to finish its orbit. The moon has various sides that are faced with the sun which developed the light or dark face of the moon on the earth. Also, Moon has 384,400 km distance from the earth.

learn more about orbit here: https://brainly.com/question/25404554

Answer:

The period of the motion will still be equal to T.

Explanation:

for a system with mass = M

attached to a massless spring.

If the system is set in motion with an amplitude (distance from equilibrium position) A

and has period T

The equation for the period T is given as

[tex]T = 2\pi \sqrt{\frac{M}{k} }[/tex]

where k is the spring constant

If the amplitude is doubled, the distance from equilibrium position to the displacement is doubled.

Increasing the amplitude also increases the restoring force. An increase in the restoring force means the mass is now accelerated to cover more distance in the same period, so the restoring force cancels the effect of the increase in amplitude. Hence, increasing the amplitude has no effect on the period of the mass and spring system.

.Answer;

Using Fmax=qVB

F=(1.6*10^-19 C)(5.860*10^6 m/s)(1.38 T)

ANS=1.29*10^-12 N

2. Using Amax=Fmax/ m

Amax =(1.29*10^-12 N) / (1.67*10^-27 kg)

ANS=1.93*10^15 m/s^2*

3. No, the acceleration wouldn't be the same. Since The magnitude of the electron is equal to that of the proton, but the direction would be in the opposite direction and also Since an electron has a smaller mass than a proton

Answer:

it is either constant or zero

Explanation:

Answer:

y is doubled

Explanation:

If x is halved, that means the value is doubled. Here is an exmaple:

y=1/2. If the denominater is doubled, y would equal y=1/1. So, the value of y has doubled from 0.5 to 1. Therefore, if the denominator is halved, the solution will be doubled.

Answer:

The  value is  [tex]N = 3.708*10^{7} \ \ atoms[/tex]

Explanation:

From the question we are told that

    The pressure is  [tex]P = 1.53 *10^{-7} \ N/m^2[/tex]

    The  temperature is  [tex]T = 26 + 273 = 299 \ K[/tex]

     The volume is  1 cubic cm = [tex]1 * 10^{-6} m^3[/tex]

Generally according to the ideal gas law we have that

      [tex]PV = NkT[/tex]

here  k is the Boltzmann constant with a value  [tex]k = 1.38 *10^{-23} \ J/K[/tex]

  =>  [tex]N = \frac{PV}{ k T}[/tex]

=>     [tex]N = \frac{ 1.53 *10^{-7} * (1* 10^{-6})}{ 1.38*10^{-23} * 299}[/tex]

=>    [tex]N = 3.708*10^{7} \ \ atoms[/tex]

Answer:

0.37 cm

Explanation:

The image is formed on the retina which is at a constant distance of 2.70 cm to the lens. Therefore, image distance = 2.70 cm.

The object is at a distant of 265 cm to the lens of the eye.

From lens formula,

[tex]\frac{1}{f}[/tex] = [tex]\frac{1}{u}[/tex] + [tex]\frac{1}{v}[/tex]

where: f is the focal length, u is the object distance and v is the image distance.

Thus, u = 265.00 cm and v = 2.70 cm.

[tex]\frac{1}{f}[/tex] = [tex]\frac{1}{265}[/tex] + [tex]\frac{27}{10}[/tex]

  = [tex]\frac{10+7155}{2650}[/tex]

[tex]\frac{1}{f}[/tex]  = [tex]\frac{7165}{2650}[/tex]

⇒ f = [tex]\frac{2650}{7165}[/tex]

      = 0.37

The focal length of the eye is 0.37 cm.

Answer:

0.03143 Gy

Explanation:

Mass of the human body = 70 kg

Mass of potassium in the human body = 140 g

chemical atomic mass of potassium = 39.1

From avogadros number, we know that 1 atomic mass of an element contains 6.023 × 10^(23) atoms

Thus,

140g of potassium will contain;

(140 × 6.023 × 10^(23))/(39.1) = 2.1566 × 10^(24) atoms

We are told that the natural abundance of one of the 40K isotopes is 0.012%.

Thus;

Number of atoms of this isotope = 0.012% × 6.023 × 10^(23) = 7.2276 × 10^(19) K-40 atoms

Formula for activity of K-40 is given as;

Activity = (0.693 × number of K-40 atoms)/half life

Activity = (0.693 × 7.2276 × 10^(19))/1300000000

Activity = 3.85 × 10^(10)

We are told that each decay deposits 1.0 MeV of energy into the body.

Thus;

Total energy absorbed by the body in a year = 3.85 × 10^(10) × 1 × 365 = 1405.25 × 10^(10) MeV

Now, 1 MeV = 1.602 × 10^(-13) joules

Thus;

Total energy absorbed by the body in a year = 1405.25 × 10^(10) × 1.602 × 10^(-13) = 2.25 J

1 Gy = 1 J/kg

Thus;

Yearly dose = 2.25/70 = 0.03143 Gy

(a) The car is undergoing an acceleration of

[tex]a=\dfrac{22.7\frac{\rm m}{\rm s}-0}{9.02\,\mathrm s}\approx2.52\dfrac{\rm m}{\mathrm s^2}[/tex]

so that in 9.02 s, it will have covered a distance of

[tex]x=\dfrac a2(9.02\,\mathrm s)^2\approx102\,\mathrm m[/tex]

The car has tires with diameter d = 58.5 cm = 0.585 m, and hence circumference π d ≈ 1.84 m. Divide the distance traveled by the tire circumference to determine how many revolutions it makes:

[tex]\dfrac{102\,\mathrm m}{1.84\,\mathrm m}\approx55.7\,\mathrm{rev}[/tex]

(b) The wheels have average angular velocity

[tex]\omega=\dfrac{\omega_f+\omega_i}2=\dfrac{\theta_f-\theta_i}{\Delta t}[/tex]

where [tex]\omega[/tex] is the average angular velocity, [tex]\omega_i[/tex] and [tex]\omega_f[/tex] are the initial and final angular velocities (rev/s), [tex]\theta_i[/tex] and [tex]\theta_f[/tex] are the initial and final angular displacements (rev), respectively, and [tex]\Delta t[/tex] is the duration of the time between initial and final measurements. The second equality holds because acceleration is constant.

The wheels start at rest, so

[tex]\dfrac{\omega_f}2=\dfrac{55.7\,\rm rev}{9.02\,\rm s}\implies\omega_f\approx12.4\dfrac{\rm rev}{\rm s}[/tex]

Answer:

Pressure, P = 1250 Pa

Explanation:

Given that,

Weight of a brick, F = 50 N

Dimension of the brick is 30.0 cm × 10.0 cm × 4.00 cm

We need to find the maximum pressure it can exert on a horizontal surface due to its weight. Pressure is equal to the force acting per unit area. Pressure exerted is inversely proportional to the area of cross section. So, we need to minimize area. Taking to smaller dimensions.

A = 40 cm × 10 cm = 400 cm² = 0.04 m²

So,

Pressure,

[tex]P=\dfrac{50\ N}{0.04\ m^2}\\\\P=1250\ Pa[/tex]

So, the maximum pressure of 1250 Pa it can exert on a horizontal surface.

The maximum pressure it can exert on a horizontal surface due to its weight will be 1250 Pascal.

The force applied perpendicular to the surface of an item per unit area across which that force is spread is known as pressure. It is denoted by P.

The given data in the problem is;

W is the weight of a brick = 50 N

The dimension of the brick = 30.0 cm × 10.0 cm × 4.00 cm

A is the area,

The area is found as;

A=40 cm × 10 cm = 400 cm² = 0.04 m²

The pressure is the ratio of the force and area

[tex]\rm P = \frac{F}{A} \\\\ \rm P = \frac{50}{0.04} \\\\ \rm P =1250 \ Pascal[/tex]

Hence the maximum pressure it can exert on a horizontal surface due to its weight will be 1250 Pascal.

To learn more about the pressure refer to the link;

https://brainly.com/question/356585

Answer:

Distance= 4 miles

Time = 36.3 seconds

Explanation:

80 mph = 178.95 m/s

90 mph = 201.32 m/s

V = u +at

201.32= 0+a(4.5)

201.32/4.5= a

44.738 m/s² = a

Acceleration of the cop car

= 44.738 m/s²

Distance traveled at 4.5seconds

For the cop car

S= ut + ½at²

S= 0(4.5) + ½*44.738*4.5

S= 100.66 meters

Distance traveled at 4.5seconds

For the speeding car

4.5*178.95=805.275

The cop car will still cover 704.675 +x distance while the speeding car covers for their distance to be equal

X/178.95= (704.675+x)/201.32

X-0.89x= 626.37

0.11x= 626.37

X= 5694.3 meters

The time = 5694.3/178.95

Time =31.8 seconds

So the distance they meet

= 5694.3+805.275

= 6499.575 meters

= 4.0 miles

The Time = 4.5+31.8

Time = 36.3 seconds

Answer:

Velocity of wave (V) = 5.2 × 10² m/s

Explanation:

Given:

Per unit length mass (U) = 4.80 × 10⁻³ kg/m

Tension (T)= 1,300 N

Find:

Velocity of wave (V)

Computation:

Velocity of wave (V) = √T / U

Velocity of wave (V) = √1300 / 4.80 × 10⁻³

Velocity of wave (V) = √ 270.84 × 10³

Velocity of wave (V) = 5.2 × 10² m/s