Answer:
A RAID 1 configuration of 4 disks has higher storage capacity than a RAID 0 configuration
Explanation:
Redundant Array of Independent Disks(RAID) are multiple physical drives arranged in logical units to provide data redundancy and increased performance. They are
RAID 1 configuration duplicates data storage, albeit of lower performance than RAID 0. Also called disk mirroring because it mirrors data on two or more disks, it provides at least two drives that are used interchangeably or together.
A RAID 1 is the configuration of the 4 disks that has higher storage capacity than a RAID 0 configuration. This option A is correct.
What is the RAID ?The RAID is a redundant array of the inexpensive disks and refers to the storage visualization technology that combines multiple physical disk drives. Its contract with earlies highly reliable mainframe disk drives.
The RAID one needs mini of two physical drives as the data is given simultaneously in two places. These drives are mirror images as ne fails the other can take over.
Find out more information about the RAID.
brainly.com/question/26980060.
why the internet is not policed
Answer:
The Internet allows people to circumvent law by committing criminal acts from areas where their activities are not illegal. Those areas will always exist, and thus new regulations will be just as ineffective as the old ones are ["Net Needs Law Enforcement, Author Says,"]. But Internet traffic is marked with IP addresses, and those addresses can be tied to specific networks with specific locations. Shouldn't it be possible to separate traffic based on the originating network and treat data coming from relatively insecure locations differently than data coming from relatively secure locations? It would be much harder for someone in a rogue nation to hack a network if he had to hack an intermediary network first. And unlike government regulation, which has zero impact in areas where these threats are likely to originate, separating traffic by location might actually work
Programming languages create codes that represent binary numbers so that programmers can write in a language closer to natural speech.
Answer:
True
Explanation:
A software can be defined as a set of executable instructions (codes) or collection of data that is used typically to instruct a computer how to perform a specific task and to solve a particular problem.
This ultimately implies that, programming languages are designed and developed for creating codes that represent binary numbers (0s and 1s), so that programmers or software developers can write in a language closer to natural speech i.e the human language.
Tristen is teaching her history course. She printed off her presentation so the students could take notes. Wyatt is
teaching a science course. He wants to make sure students who do not have PowerPoint can still view the
presentation. Reed is teaching a math course online. He finds the students are very visual and wants to control the
timing per slide
Which best describes how each teacher handled their presentations?
O Tristen created handouts, Wyatt saved as a PDF, and Reed saved as a video
O Tristen created a video, Wyatt saved as a PDF, and Reed broadcasted.
O Tristen created handouts, Wyatt saved as a video, and Reed saved as a PDF.
O Tristen created a video, Wyatt broadcasted, and Reed saved as a video
Since Tristen want her students to take notes on her presentations, she should have some sort of handout.
Because Wyatt, wants to ensure that students who do not have PowerPoint can still view his presentations, converting it into a pdf is best.
Since Reed's students are very visual, converting his slides into a video will make it better for students who want to spend some time assessing some of the graphs or equations.
Thus, A is the best choice.
You are concerned that if a private key is lost, all documents encrypted using your private key will be inaccessible. Which service should you use to solve this problem
Answer:
Key escrow.
Explanation:
Cyber security can be defined as preventive practice of protecting computers, software programs, electronic devices, networks, servers and data from potential theft, attack, damage, or unauthorized access by using a body of technology, frameworks, processes and network engineers.
In Cyber security, encryption is a form of cryptography and typically involves the process of converting or encoding informations in plaintext into a code, known as a ciphertext.
Typically, an information or data that has been encrypted can only be accessed and deciphered by an authorized user.
Hence, if a private key is lost, all documents encrypted using that private key will be inaccessible to the users. Thus, the service that can be used to solve this problem is a key escrow because the cryptographic (private) keys kept in an escrow system are protected and would not be released to anyone other than the original user (owner).
A key escrow can be defined as a data security method of storing very essential cryptographic keys.
Simply stated, key escrow involves a user entrusting his or her cryptographic key to a third party for storage.
As a standard, each cryptographic key stored or kept in an escrow system are directly linked to the respective users and are encrypted in order to prevent breach, theft or unauthorized access.
monitor is hard copy output device??
false
true
Answer:
false
Explanation:
monitor is an output device but not hard copy. Hard copy is paper
who is the father of computer
Answer:
Charles Babbage is the father of computer
Explanation:
Charles Babbage is know as father of computer.
hope this help!
describe in detail what each step would look like if you ran into a software error.
Answer:
First you have to identify the problem.
Second Gather information.
Third iterate through potential solutions.
Fourth Test your solution.
Explanation:
There are many different ways to handle errors in software but this is the way I do it.
Hope this helps :)
After running into a software error, a user needs to first determine the reason for the error, work towards a solution and then execute the solution discovered.
Software ErrorA software error occurs when an error or unusual behaviour is observed in a piece of software and which can be reproduced after certain actions are performed that are in line with the stated rules of the software developer. In other words, a software error does not occur if the software was not used as directed by the software developer.
You can learn more about software errors here https://brainly.com/question/18497347
#SPJ6
Define Data communication
Explanation:
Data transmission and data reception is the transfer and reception of data over a point-to-point or point-to-multipoint communication channel. Examples of such channels are copper wires, optical fibers, wireless communication channels, storage media and computer buses.
You are concerned about attacks directed at your network firewall. You want to be able to identify and be notified of any attacks. In addition, you want the system to take immediate action to stop or prevent the attack, if possible. Which tool should you use
Answer:
Intrusion Prevention System (IPS)
Explanation:
Firewall can be defined as a network security device that monitors incoming and outgoing network traffic and decides whether to allow or block specific traffic based on a defined set of security rules.
Simply stated, a firewall is a network security protocol that monitors and controls inbound and outbound traffic based on set aside security rules.
A firewall is used to control access to a computer or network, as it creates a barrier between a computer or a network and the internet in order to protect against unauthorized access.
Basically, it is a network security device or security system pre-installed on most computers to essentially inspect data being transmitted to or from a computer
Thus, the tool you should use is an intrusion prevention system (IPS).
PLEASE HELP DUE!!!
WILL GIVE BRAINLIEST!!
can someone help me please?
Answer:
see below picture
Explanation:
You can work your way through the formula from the inside out, mapping every operation to a gate.
You have been asked to help a small office with a limited budget set up and configure a Windows network. There are only five computers in this office. In addition to the ability to share network resources, security is a top priority.
Which of the following is the BEST course of action in this situation?
A. Install a HomeGroup to provide a single login and simplify security and sharing.
B. Install a WorkGroup to provide a single login and simplify security and sharing.
C. Install a WorkGroup to allow each device to control what is shared and with whom.
D. Install a HomeGroup to allow each computer to control which items are shared and who can access them.
Answer:
I will choose a option tin best
Answer: Install a WorkGroup to allow each device to control what is shared and with whom.
Explanation:
You are in charge of installing a remote access solution for your network. You decide you need a total of four
remote access servers to service all remote clients. Because remote clients might connect to any of the four
servers, you decide that each remote access server must enforce the exact same policies. You anticipate that
the policies will change frequently.
What should you do? (Select two. Each choice is a required part of the solution.)
A. Configure network policies on the RADIUS server.
B. Make each remote access server a member of the RemoteServers group.
C. Configure the exact same network policies on each server.
D. Configure one of the remote access servers as a RADIUS server, and all other servers as RADIUS clients.
E. Use Group Policy to configure network policies in the default Domain Controllers GPO.
F. Configure each remote access server as a domain controller.
Answer: configure one of the remote access servers as a RADIUS server and all other servers as RADIUS clients
configure network access policies on the RADIUS server
Explanation:
full form of ip ........?
is computers takes lots of time to do any mathematical calculations.
Answer:
I think the answer is a computer take lost of time to do any mathematical calculations because problem in the book or questions.
Hope this helps you ^^
A computer that supports LoJack technology must have two main components installed. It needs an Application Agent (residing in the OS), which sends tracking signals that enable location and recovery of a stolen device. The other component is a Persistence Module, which restores the Application Agent and allows it to survive reinstallation of an operating system or reformatting of the hard drive. The highest level of security offered by LoJack can be achieved when Persistence Module resides in the:
Answer: Computer's BIOS
Explanation:
Following the information given in the question, the highest level of security that is offered by LoJack can be achieved when Persistence Module resides in the computer's BIOS.
The BIOS (basic input/output system) refers to the program which the microprocessor of a computer uses in starting the computer system when the computer is powered on. It should also be noted that the BIOS is used in managing the data flow that exist between the operating system of the computer and the attached devices like the keyboard, hard disk, mouse, etc.
Computers work on the garbage-in, garbage-out concept. Comment
Which computer can be used where there is no regular electricity?
Answer:
A mechanical computer
Explanation:
Created from gears and levers
Which of these is NOT an input device?
O keyboard
O mouse
O blinking light
O microphone
Plz help help help
What was the first electromechanical digital computer?
For your kind information I would like to tell you that don't search on internet because it will show ENIAC and that is not the answer the answeris may be ABC or MARK I. I am just confused, Please help me
Explanation:
For your kind information the answer of the question is MARK I.
Answer:
What was the first electromechanical digital computer?
=⟩ Mark I was the first electromechanical digital computer.
Hope it helpful to you
(e) Give the output of the following:
String n="Computer Knowledge";
String m = "Computer Applications";
System.out.println(n.substring(0,8).concat(m.substring(9)));
Answer:
Computer Applications
true
Answer:
Computer Applications
Explanation:
true
8. Compare the advantages and disadvantages of using a smartphone rather than a laptop computer for creating a report.
Answer: the advantage of using a smartphone rather than a laptop computer is that you can talk to people across the world, call people, make texts, and get easy access to the internet. but the disadvantages are that a lot of people stay inside their house because of phones, not getting enough exercise.
Explanation:
The advantages and disadvantages of using a smartphone rather than a laptop computer for creating a report. have been compared below.
The advantages of using a smartphone rather than a laptop computer are;
Portability; Smartphones are portable enough that they can fit into pockets and some purses and as such can be taken with you anywhere easily unlike a laptop computer that doesn't have such physical property.Cost; Smartphones are largely cheaper than the average laptop computer. Thus, cost is a good factor.Disadvantages of using a smartphone rather than a laptop computer are;
Screen size; Smartphone screen size are always smaller than that of laptop computers .Software's; Smartphones can't run many of the type of powerful software's that can run on laptop computers.Data entry and user input; Due to the portability of smartphones, their keyboards are usually smaller than that of laptop desktops which makes data entry more difficult for those that have big fingers.Read more about smartphones and laptops at; https://brainly.com/question/21283135
1. Answer the following questions: a. What are the different types of number system? Name them.
Answer:
binary,decimal, hexadecimal and octal number system
The CPU is responsible for?
The CPU (Central Processing Unit) is the part of a computer system that is commonly referred to as the "brains" of a computer. The CPU is also known as the processor or microprocessor. The CPU is responsible for executing a sequence of stored instructions called a program .
Abdullah wants to send sessitive data. Abdullah wants to make sure that only ahmed can see and read this. How can abdullah protect this data, so that ahmed can only access it. By using this information make an algorithm.
Answer:
Use an encryption algorithm
Explanation:
An encryption algorithm can be used to hide the message from parties in-between or any third parties that might want to intercept the message being sent by Abudullah to Ahmed.
Encryption algorithms use cryptographic methods to encrypt or code data such that only the sender and receiver of that data have the keys to properly decode/decrypt these messages/data.
how are the computer classified into different types
Answer:
Computers differ based on their data processing abilities. They are classified according to purpose, data handling and functionality. ... According to data handling, computers are analog, digital or hybrid. Analog computers work on the principle of measuring, in which the measurements obtained are translated into data.Travis just got promoted to network administrator after the previous administrator left rather abruptly. There are three new hires that need onboarding with user accounts. When Travis looks at all the existing account names, he notices there is no common naming system. Where should he look to try to give the new hires user accounts with proper naming conventions
Answer:
The company's account policy
Explanation:
If there's no common naming system, It's best to go with the company's account policy.
A logistics company's vulnerability scan identifies the following vulnerabilities on Internet-facing devices in
the DMZ: SQL injection on an infrequently used web server that provides files to vendors SSL/TLS not used for a website that contains promotional information
The scan also shows the following vulnerabilities on internal resources: Microsoft Office Remote Code Execution on test server for a human resources system
TLS downgrade vulnerability on a server in a development network In order of risk, which of the following should be patched FIRST?
A. Microsoft Office Remote Code Execution
B. SQL injection
C. SSL/TLS not used
D. TLS downgrade
Answer:
A. Microsoft Office Remote Code Execution
Explanation:
From the given options, we have;
The web server having a SQL injection is infrequently use
The information on the website having SSL/TLS not used is promotional
The location of the server having a TLS downgrade is on a development network
The location of the Microsoft Office Remote Code Execution is on a human resource system test server
Therefore, given that the test server, is the deployment source of the main server, and that with a Remote Code Execution, RCE, cyber attack, the attacker is able to make commands work on other computers, the RCE attack on the test server is a potential access of an attack on the main servers, and should be patched first.
What are the advantages of Radio waves over micro waves?
Answer:
radio frequencies can penetrate deeply into the material and thus heat thick products. They heat more slowly than microwaves and thus make it possible to treat more delicate products which require a slower heating.
this help me please.
Answer:
1) 1011010
2) 1100100
3) 1010101
4) 23
5) 22
6) 24
Mary uploaded some images on her website. She chose an image and downloaded it. She found that the image she saw on screen did not seem to have the same DPI as when she had scanned it (she had uploaded a scanned image with 300 DPI). What could be reason with this visual decrease in DPI on the computer screen? (Correct Answer only)
A. Some image resolution was lost while uploading it
B. She downloaded a compressed version of the image.
C. The computer reset the resolution of the image.
D. Her file was probably corrupted while downloading.
E. Computer screens typically display images of only 72 DPI.
The reason for this visual decrease in DPI on the computer screen is some image resolution was lost while uploading it. The correct option is A.
What is resolution?Resolution is the quality of the image that we see in the screen. It is the number of pixels per inch of space. The meaning of PPI is pixel per inch. When a high-resolution picture is seen, it means there are more pixels per inch.
When a picture is downloaded from a site. It does not download in the original pixels because during downloading some pixels are lost due to slow net or the settings of the computer. And a compressed version does not download on its own, and corrupted files do not affect the resolution.
Thus, the correct option is A. Some image resolution was lost while uploading it.
To learn more about resolution, refer to the link:
https://brainly.com/question/15189307
#SPJ5
