In a single replacement reaction, one element replaces another element in a compound. Thus, d is correct.
What is replacement reaction?Replacement reactions are those in which one or two groups are replaced to form the new products. There are both single replacement reaction and double double displacement reactions.
In single replacement reactions, only one reactant will be replaced in the reaction whereas in double replacement reactions, two groups from the reactants are exchanged each other.
For example the reaction between HCl and sodium metal can be written as:
2Na + 2HCl ⇒ 2NaCl + H₂
Here, Cl is replaced from H to Na.
To find more on displacement reaction, refer here:
http://brainly.com/question/29307794
#SPJ1
Consider the half reactions one more time. Will the reaction as written here occur spontaneously?
Fe2+ (aq) +2 e-→ Fe(s) E° = -0.447 V
Cu2+ (aq) +2 e-→ Cu(s) E° = 0.342 V
Fe2+ (aq) + Cu(s) → Cu²+ (aq) + Fe(s)
yes or no or need more information
To solve such we need to have concept of spontaneity. The terms "feasible" and "likely" are both used to describe spontaneous processes. Therefore, second reaction will occur spontaneously.
What is spontaneity?The word "spontaneity" refers to a process's viability. A process is referred to as spontaneous if it can occur either on its own or as the result of some initiation under a certain set of circumstances. In other terms, a spontaneous process is one that may happen on its own, without any outside intervention.
For a reaction to be spontaneous, the value for ΔG should be negative and for that cell potential should be positive value according to following equation.
ΔG=-nFE
ΔG = Gibbs's free energy
E= cell potential
F= 96500
n= number of electron
Therefore, second reaction will occur spontaneously.
To learn more about spontaneity, here:
https://brainly.com/question/5372689
#SPJ1
A rigid 11.7 L sealed vessel containing 3.3 mol O2(g), 1.6 mol CH4(g) and 2.3 mol of He(g)
has an internal temperature of 78oC.
a. Calculate the partial pressure of each gas.b. What is the total pressure in the vessel?
c. Find the mole fraction of each gas in the vessel.d. A lab technician ignites the mist in the flask and the methane gas combusts in oxygen
to form carbon dioxide and water. Find the mole fraction of each gas in the mixture
after the reaction.
a) Partial pressures is Po2 = 8.13 atm,Pch4=3.94atm,Phe = 5.6 atm,B) Total pressure= 17.73 atm, C) mole fraction are Хо2 =0.46, xch4=0.22, xhe=0.32.
mole fraction are Хo2 =3.3/3.3+ 16 + 2.3,Хо2 =0.46, xch4=0.22, xhe=0.32. Xo2 = no2/no2 + nch4 + nhe, total pressure = 8.13+3.94+5.6=17.73 atm. The pressure applied by a solitary gas in a combination is did refer to as its partial pressure. Presuming we get a combination of ideal gas law, we could use ideal gas equation to resolve issues involving gases inside a mixture. Partial Pressure can be defined as if a canning jar filled with far more than one gas, evey gas enforces pressure. The pressure of any gas enclosed within in the container is regarded to as its partial pressure. The number of molecules of a special component in a mix divided by the total amount of moles in the given medium is symbolised by the mole fraction. It's a means of expressing a solution's concentration.
Learn more about Partial pressures here:
https://brainly.com/question/29905133
#SPJ4
which of the following is true regarding the distillation of an water-ethanol (etoh) mixture? correct! etoh distills off first based on boiling point water distills off first based on boiling point etoh and water distill off at the same time in equal proportions water has a lower boiling point than etoh correct! etoh has a lower boiling point than water
The product of the distillation is enriched in the lower boiling liquid, The vapor is a mixture of molecules from all the volatile liquids, The vapor is enriched in the lower boiling component.
Traditional distillation, often known as distillation, is the process of removing specific elements or compounds from a liquid mixture by selectively boiling and condensing them, typically inside a still. Dry distillation, which might involve chemical alterations like destructive distillation or cracking, is the heating of solid materials to produce gaseous products (which may condense into liquids or solids). In either case, the process takes advantage of variations in the relative volatility of the mixture's components. Distillation can produce an almost completely complete separation (resulting in nearly pure components), or it can be a partial separation that boosts the concentration of certain components. Distillation, a physical separation procedure rather than a chemical reaction, is a unit operation of virtually universal importance in industrial applications.
Learn more about distillation here:
https://brainly.com/question/23802525
#SPJ4
what is the iupac name of the following compound 4 tert butyl 3 chlorophenol 4 tert butyl 5 chlorophenol
the IUPAC name of 4 tert butyl 3 chlorophenol will be given as
3-chloro-4-(1,1-dimethylethyl)phenol.
And the structure for the compound can be given as shown in figure.
IUPAC (International Union of Pure and Applied Chemistry), serves the international scientific endeavor in the dual function of a fundamental science and mission-oriented Union.
Naming according to IUPAC is based on naming a molecule's longest chain of carbons connected via single bonds forming alkane, whether in a continuous chain or in a ring.
All other deviations, either multiple bonds or atoms other than carbon and hydrogen, are indicated by prefixes or suffixes according to a specific set of priorities.
To know more about IUPAC:
brainly.com/question/16631447
#SPJ4
Balance this equation, AlCl3 + NaOH -
Al(OH)3 + Nacl
The balanced chemical equation for the given chemical reaction is AlCl₃ + 3 NaOH [tex]\rightarrow[/tex]Al(OH)₃ +3 NaCl.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ1
suppose of barium nitrate is dissolved in of a aqueous solution of sodium chromate. calculate the final molarity of nitrate anion in the solution. you can assume the volume of the solution doesn't change when the barium nitrate is dissolved in it. round your answer to significant digits.
Final molarity of NO3- in solution = 0.0193864/0.200= 0.0969 M OR 0.097
Barium nitrate=Barium nitrate is the inorganic compound with the chemical formula Ba(NO₃)₂. It, like most barium salts, is colorless, toxic, and water-soluble. It burns with a green flame and is an oxidizer.
Ba(NO3)2(aq) + Na2CrO4(aq)->2NaNO3(aq) + BaCrO4(s)
Moles of Ba(NO3)2 = mass/molar mass = 1.57/161.97 = 0.0096932
Moles of Na2CrO4 = molarity volume in liters = (44*10^-3)*(200/1000) = 0.0088
From reaction,
1 mole Na2CrO4 requires 1 mole Ba(NO3)2
So, 0.0088 moles will require = 1*0.0088 0.0088 moles of Ba(NO3)2
So, Ba(NO3)2 is excess reagent and Na2CrO4 is limiting reagent.
1 mole Na2CrO4 produces 2 moles NaNO3
So, 0.0088 mole Na2CrO4 will produce = 2*0.0088 0.0176 moles
So, moles of NO3- from NaNO3 (n2) = 0.0176+1 = 0.0176
Total moles of NO3-=n1+n2 = 0.0017864 +0.0176 0.0193864 moles
Volume of solution
= 200 ml = 0.200 liters
Final molarity of NO3- in solution = 0.0193864/0.200= 0.0969 M OR 0.097
learn more about barium nitrate here
https://brainly.com/question/27233560
#SPJ4
Which statement is true? (2 points)
Group of answer choices
Geothermal power plants use the renewable resource of heat from within the Earth to generate electricity.
Solar energy is a non–renewable resource that is used by many countries all over the world.
Oil is a non–renewable resource that is hardly ever used, so there is not a concern of depleting the Earth's supply.
Hydroelectric energy uses the energy from the sun, which is a renewable resource.
Geothermal power plants use the renewable resource of heat from within the Earth to generate electricity is true .
Define geothermal energy.
Deep in the Earth's core, heat is produced that is known as geothermal energy. A clean, sustainable energy source that can be used to generate heat and electricity is geothermal energy.
Rocks, water, gas, and other geological materials are constantly being warmed by heat radiating from the core. Nearby rocks and aquifers underground are heated by magma. Geysers, hot springs, steam vents, submerged hydrothermal vents, and mud pots can all emit hot water. These are all geothermal energy sources.
They can either be directly heated by capturing their heat or by using the steam they produce to produce power. Buildings, parking lots, and sidewalks may all be heated with geothermal energy.
To know more about thermal energy use link below:
https://brainly.com/question/19666326
#SPJ1
If a little bit of lead nitrate gets in contact with a persons eye will it cause serious issues?
Answer:
Explanation:
Lead nitrate can cause serious issues if it comes into contact with a person's eye. Lead nitrate is a toxic chemical that can cause irritation and damage to the eye if it comes into contact with the eye tissue. Symptoms of eye irritation or injury from lead nitrate may include redness, swelling, pain, and blurred vision. If left untreated, lead nitrate exposure to the eye can lead to serious eye damage, including corneal abrasions, conjunctivitis, and even vision loss.
If lead nitrate comes into contact with your eye, it is important to seek medical attention immediately. You should rinse your eye with plenty of water and seek medical attention as soon as possible. Your healthcare provider will be able to determine the extent of the injury and provide appropriate treatment. It is important to follow your healthcare provider's instructions carefully to prevent further injury to your eye.
If the temperature is held constant what change in volume would cause a pressure of an enclosed guys to be reduced to 1 quart over to original value
Pressure and volume are inversely related at constant temperature, therefore if the volume is cut in half, the pressure must also be doubled.
When the temperature is constant, the relationship between a gas's pressure and volume is inverse. When temperature is constant, the product of pressure and volume is also constant. Boyle's law or Mariotte's law refers to this relationship. The pressure might be lowered to one-quarter of its initial value if you gave the gas more volume. According to the combined gas law, a gas's pressure is inversely proportional to its volume and directly proportional to its temperature. As a result, if you lower the pressure of a certain volume of gas, it will expand in volume.
Learn more about pressure here-
https://brainly.com/question/14760196
#SPJ4
the equilibrium constant of a redox reaction can be calculated from the standard reduction potentials of involved redox couples at given temperature.
The Nernst equation and the link between the standard cell potential and free energy can be used to determine the equilibrium constant of the redox process in an electrochemical cell.
The ratio of the product concentration to the reactant concentration is the equilibrium constant. a fixed value for a certain reaction at a specific temperature. The letter "c" denotes the expression of the equilibrium constant in terms of concentrations.
The standard cell potential, temperature, reaction quotient, and the cell potential of an electrochemical cell are all related by the Nernst equation. The Nernst equation can be used to determine the cell potentials of electrochemical cells even under unusual circumstances.
To know more about Equilibrium Constant :
brainly.com/question/15118952
#SPJ4
Calculate the number of moles of carbon dioxide gas if the volume is 2.0 L, the pressure is 2.0 atm, and the temperatue is 410 K.
Use three significant figures in your answer.
mol
Taking into account the ideal gas law, the number of moles of carbon dioxide is 0.119 moles.
Ideal gas lawAn ideal gas or theoretical gas is a set of separate gaseous molecules separated from each other in such a way that no intermolecular forces are exerted between them.
The ideal gas condition normally occurs at low pressures and high temperatures, which allows each particle to be far from each other so that they do not interact.
The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:
P×V = n×R×T
Where:
P is the gas pressure.V is the volume that occupies.T is its temperature.R is the ideal gas constant. The universal constant of ideal gases R has the same value for all gaseous substances. The numerical value of R will depend on the units in which the other properties are worked.n is the number of moles of the gas. Number of moles of carbon dioxideIn this case, you know:
P= 2 atmV= 2 LT= 410 KR= 0.082 (atmL)÷(molK)n= ?Replacing in the ideal gas law:
2 atm× 2 L= n×0.082 (atmL)÷(molK)× 410 K
Solving:
[2 atm× 2 L]÷ [0.082 (atmL)÷(molK)× 410 K]= n
0.119 moles= n
Finally, the number of moles is 0.119 moles.
Learn more about the ideal gas law:
brainly.com/question/4147359
#SPJ1
Which of the following characteristics was NOT included in Dmitri Mendeleev's periodic table?O distribution of elements determined by electron configurationO heavier elements placed in rows closer to the bottom of the tableO elements arranged by increasing atomic massO elements placed in columns based on chemical properties
Mendeleev's periodic table includes all the elements that were known at the time.
The rows of the table, were called periods and each period contained eight elements that increased in atomic mass from left to right.
The columns of the table, called groups, contained elements with similar properties.
The special this about this table was, the gaps for predicted elements were left.
In this question, we are given with four statements and are asked to determine, which of the following statement is not true regarding Dmitri Mendeleev's periodic table.
distribution of elements determined by electron configurationheavier elements placed in rows closer to the bottom of the tableelements arranged by increasing atomic masselements placed in columns based on chemical propertiesOut of these four options, option number 1 is correct as the statement distribution of elements determined by electron configuration is not true regarding Mendeleev's periodic table.
To know more about Mendeleev's periodic table:
brainly.com/question/11974961
#SPJ4
Can anyone answer this please. All of part 2.
please see picture
Thank you
Answer:
See below for detailed answers to each part of the question.
Explanation:
To solve this problem, we must consider Le Chatelier's Principle, which states the equilibrium position of a system will shift to counteract any changes that occur in the system. This principle can be used to answer each part of your question.
In Part i, we know that N2 is a reactant. Decreasing the concentration of N2 would cause this reaction to shift towards the reactants (to the left), effectively producing more N2 to counteract the change. This would simultaneously decrease the concentration of NH3, since this is a product of the reaction.
Considering the next part, also using Le Chatelier's principle, increasing the pressure would encourage the reaction to shift to decrease the pressure. In order to decrease the pressure, the equilibrium should shift to the side with fewer gas molecules. In this case, there are 4 gas molecules in the reactants and 2 in the products, so the equilibrium position shifts to the products (to the right) to decrease the pressure. This would also increase the amount of NH3, since NH3 is a product.
In Part iii, the temperature is increased. To counteract this change, the reaction will shift to decrease the temperature. Since we know that this reaction is exothermic, the equilibrium will shift towards the reactants (left) to decrease the temperature. This would decrease the amount of NH3.
Finally, in Part IV, if a catalyst is added, this will not change the equilibrium position. Catalysts do not change the overall energy change of a reaction, only the activation energy, so no equilibrium shift will be observed. Thus, the amount of NH3 will not increase/decrease but will remain the same.
For more practice problems with LeChatelier's Principle, check out these other questions on Brainly:
https://brainly.com/question/14892046
https://brainly.com/question/2001993
Answer:
I’m struggling with these too! Any help is appreciated
Explanation:
nitrogen and hydrogen react to form ammonia, like this: (g) (g) (g) also, a chemist finds that at a certain temperature the equilibrium mixture of nitrogen, hydrogen, and ammonia has the following composition:
How 3 L of ammonia is produced is discussed in detail.With the formula NH3, ammonia is a nitrogen and hydrogen inorganic chemical.
Ammonia, the simplest pnictogen hydride and a stable binary hydride, is a colorless gas with a strong, pungent odor.
N2 (g) + 3H2 (g) ——> 2NH3 (g)
2(1.5) L = 3 L
2(1.5) L = 3 L
The stoichiometric coefficients predict that 1 mol of nitrogen will combine with 3 mol of hydrogen to create 2 mol of ammonia.
As a result, if the ratio of nitrogen to hydrogen is 1:3, (let's say x and 3x), then 2x of the product, i.e. ammonia, will be produced.
Here, x = 1.5, resulting in a 3 L ammonia formation.
Complete question:Nitrogen and hydrogen gases react to form ammonia gas as follows:N2 (g) + 3H2 (g) ——> 2NH3 (g)
At a certain temperature and pressure, 1.5L of N2 reacts with 4.5L of H2.
If all the N2 and H2 are consumed, what volume of NH3, at the same temperature and pressure, will be produced?
learn more about Ammonia Refer:brainly.com/question/15409518
#SPJ4
The atomic number of an is equivalent to the number of
An atom's protons and neutrons are measured by its atomic number.
What is atomic number?Atomic number is defined as a chemical element's number in the periodic system, which places the elements in ascending order of the number of protons in their nuclei. An element's identity is determined by its proton count.
The atomic number of an atom is how many protons it has (Z). It also has the same value as the atom's number of electrons. Total number of protons in an atom. There are exactly the same number of protons in each atom of a given element. The quantity of protons in an element is equivalent to its atomic number.
Thus, an atom's protons and neutrons are measured by its atomic number.
To learn more about atomic number, refer to the link below:
https://brainly.com/question/16858932
#SPJ1
Check the answer that applies; there may be more than one answer
Answer:
COMBINATION - - - ✓ -
DECOMPOSITION - - ✓ - -
SINGLE REPLACEMENT ✓ - - - -
DOUBLE REPLACEMENT - - - - ✓
COMBUSTION - ✓ - ✓ -
NEUTRALIZATION - - - - ✓
Arrange these elements according to electron affinity.
You are currently in a ranking module. Turn off browse mode or quick nav, Tab to move, Space or Enter to pick up, Tab to move items between bins, Arrow Keys to change the order of items, Space or Enter to drop.
Most energy released by gaining an electron Most energy absorbed by gaining an electron
Answer Bank
He, C F
The arrangement of the elements according to electron affinity is F > C > He.
Electron affinity is the energy released when one electron is added in the outer most shell of the gaseous element.
For moving left to right electron affinity increase because the force of attraction of nucleus on electron increase and size decrease so electron affinity increase.
So F has higher electron affinity because more energy is released after adding the electron.
In carbon electron negativity is less than F so electrons are less strongly attracted by nucleus than F so electron affinity of F > C
In case of He outermost shell is completely filled so electrons are not gained so has minimum electron affinity.
So electron affinity order is F > C > He
More energy released by gaining an electron is F > C > He
More energy absorbed by gaining an electron is He > C > F
So, F > C > He is the energy released by gaining an electron.
He > C > F absorbs more energy by gaining an electron.
To learn more about Electron affinity, Here :
https://brainly.com/question/24300752?referrer=searchResults
#SPJ4
Guided Practice Activity-use the pen tool to write in the coefficients
to balance the equations then fill in the number of each type of atom
by typing in the number into the fill-in boxes.
1) Determine number of atoms for each
element.
2) Pick an element that is not equal on
both sides of the equation.
3) Add a coefficient in front of the
formula with that element and adjust
your counts.
4) Continue adding coefficients to get the
same number of atoms of each element
on each side.
Mg+0₂ →
2
Mg =
0=
0=
→
8
MgO
Mg =
0=
H₂0₂ H₂0+ 0₂
H=
2
H=
0=
The coefficients in the balanced reaction equations can be seen from the equations;
[tex]2Mg + O_{2} ----- > 2MgO\\2H_{2} O_{2} ----- > 2H_{2} O + O_{2}[/tex]
What is the equation of the reaction?We know that the equation of the reaction is the equation that would show us how the reactants and the products were combined in the reaction. In the equation of the reaction. we notice that the atoms of the reactants would be broken down and then they would be recombined so as to obtain the products of the reaction.
The we know that a universal law that governs the balancing of the reactant equations is that the number of atoms of each of the elements on the reactants side must be equal to the number of the atoms of the elements that we have on the products side.
In the balanced reaction equation, the coefficients can be used to be able to balance the number of atoms.
Learn more about reaction equations:https://brainly.com/question/3588292
#SPJ1
One of the most widely used isotopes in medical diagnostics is technetium-99m (the m indicates that it is a metastable isotope). Write the symbol for this isotope, indicating both mass number and atomic number. Express your answer as an isotope.
Atomic number of Technetium is 43, Mass number is 99 and symbol is Tc ,hence symbol of isotope is 99 m43 Tc
General representation of atom is AZ X
Where , A is mass number , Z is atomic number and X is symbol of element. Atomic number of Technetium is 43, Mass number is 99 and symbol is Tc ,hence symbol of isotope is 99 m43 Tc ,Where m stands for meta stable.
A chemical element with the atomic number 43 and the symbol Tc is known as technetium. It is the lightest element whose radioactive isotopes are all present. Technetium is a synthetic element that is created in abundance. The most prevalent source of naturally occurring technetium is uranium and thorium ores, where it spontaneously fissions as a byproduct, while molybdenum ores produce it as a byproduct of neutron capture. This crystalline, silvery-gray transition metal in group 7 of the periodic table is sandwiched between rhenium and manganese, and its chemical characteristics fall somewhere in the middle of the two nearby elements. Only in traces, 99Tc is the most prevalent naturally occurring isotope.
Learn more about Technetium here:
https://brainly.com/question/16184700
#SPJ4
Which if these options best describes the diagnostic cleavage that is typical of the mica group of minerals (which includes muscovite and bietet A) Three perpendicular cleavage planes B) Two cleavage planes intersecting at 90° C) Two cleavage planes intersecting at 120 D) A single planar cleavage
D ) The answer that best depicts the diagnostic cleavage that is typical of the mica group of minerals which include muscovite and bietet is a single, planar cleavage .
Cleavage is the splitting of minerals along natural planes of weakness
When there is only one cleavage plane, a single, planar cleavage known as the basal or pinacoidal cleavage takes place. cleaved at the base of the graphite. Mica (like muscovite or biotite) has basal cleavage, that's why mica can be peeled into thin sheets.
So single planar cleavage is answer of this question.
To know more about cleavage click below link:
https://brainly.com/question/11933501#
#SPJ4
High-purity benzoic acid (C6H₂COOH; AHxn for combustion = -3227 kJ/mol) is used as a standard
for calibrating bomb calorimeters. A 1.221-g sample burns in a calorimeter (heat capacity = 1365 J/°C)
that contains exactly 1.240 kg of water. What temperature change is observed?
°℃
According to the given statement 5 °C temperature change is observed.
How does a calorimeter function and what is it?The variation in heat is measured by a calorimeter. A metal water container placed above an exhaust gases serves as the basic component of a calorimeter. The amount of water's temperature change is measured using a thermometer.
Briefing:The calorimeter burns a 1.221g sample.
The calorimeter contains 1.240 kg of water .
The calorimeter has a heat capacity of 1365 j/°C.
∆H rxn = -3227 kj/mol of benzoic acid
Given: 1.221 g is the mass of the benzoic acid
Benzoic acid's molecular weight is 122.12 g/mol.
122.12 g benzoic acid = 1 mol
1.221 g benzoic acid =1.221/122.12= 0.0099 moles
When burned, 1 mol of benzoic acid releases 3227 kj of energy.
Burning 0.0099 moles of benzoic acid produces energy
= 3227kj×(0.0099mols)/1 mol =32.2647 kj =32264.7 j
The calorimeter absorbed thermal energy
= 1365 j/C ×T
Water absorbs heat
= m× C× T
= 1240 g( 4.18 j/gC ) ×T
= 5183.2j/C×T
the total amount of heat absorbed
= 1365T + 5183.2T
=6548.2T
6548.2T=32264.7
T= 4.92 deg.C
T= 5 °C
The result is a 5 °C temperature change.
To know more about Calorimeter visit:
https://brainly.com/question/4802333
#SPJ1
a buffer solution: consists of a weak acid in aqueous solution. consists of a mixture of a weak acid and its conjugate base. changes readily in ph upon addition of acid or base. has a ph equal to the pka of the weak acid that's in solution. resists changes in ph upon addition of large amounts of acid or base.
A buffer solution is the consists of a mixture of a weak acid and its conjugate base. it resists changes in pH upon addition of small amounts of acid or base.
The correct option from the given option is , the A buffer solution is the consists of a mixture of a weak acid and its conjugate base. or the weak base and the conjugate acid. A buffer solution resist the the change in pH upon the addition of the small amount of the acid or base to them. the pH of buffer shows the little change when we add very small amount of the strong acid and the strong base.
The buffer solution has the ability to maintain the hydrogen ion concentration with only small amount of dilution with acid or base.
To learn more about buffer solution here
https://brainly.com/question/13219011
#SPJ4
Before the Contraction CycleThe contraction cycle is the repeating sequence of events that causes the process of the sliding filament mechanism, and it is made up of FOUR phases- The SR releases calcium ions (Ca2+) into the sarcoplasm- There, they bind to troponin. Troponin then moves tropomyosin away from the myosin-binding sites on actin
True. Calcium ions (Ca2+), which are released by the SR, bind to troponin in the sarcoplasm. Then, troponin displaces tropomyosin from the actin myosin-binding sites.
Troponin levels that are extremely high indicate the onset of a heart attack. Within six hours after a heart attack, the majority of individuals experience elevated troponin levels. Mostly everyone who has experienced a cardiac arrest will still have elevated levels after 12 hours. After a heart attack, troponin levels may continue to rise for 1 to 2 weeks. For instance, the typical levels for troponin I is 0 to 0.04 ng/mL, whereas the normal range for rising cardiac troponin (hs-cTn) is less than 14 ng/L. Increases in troponin levels may result from other kinds of heart damage. One of these is sinus arrhythmia.
Learn more about troponin here:
https://brainly.com/question/12973002
#SPJ4
In the list at the left are a number of different compounds. Indicate which of them are zwitterions and which are not zwitterions. Clear All (CH3)3N Is a zwitterion HOOCCH2CH2COOH Is not a zwitterion HNCH2Coo
There are numerous distinct compounds listed on the left. List the ones that are zwitterions and those that are not. Zwitter ions are molecules that include two species with opposing charges.
A compound in chemistry is a material comprised of two or more separate chemical elements mixed together in a certain proportion. Chemical connections that are challenging to break are created when the elements interact with one another. These bonds occur as a result by atoms sharing or trading electrons. a material produced by joining two or more distinct elements physically in science. Table salt and water (H2O), that are examples of compounds, are created so when elements oxygen and hydrogen combine.
learn more about compounds here:
https://brainly.com/question/13516179
#SPJ4
draw the structure of a compound with the empirical formula c5h8o that gives a positive iodoform test and does not decolorize permanganate.
A ring of C3H5 makes up the structure of a chemical with the empirical formula C5H8O that passes the iodoform test and does not discolor permanganate.
C5H8O → 1/2 (C5H12-C5H8) = 1/2(4)=2 carbons CH3C=O
No C=C after a negative permanganate test
Has a C=O bond
Methyl ketone as it tested positive for iodoform
C3H5 = ring
A cyclopropyl group is a chemical structure produced from cyclopropane that may take part in cycloadditions and rearrangements of cyclopropane in organic processes. The group contains a chemical link from each of the three carbons to both of the other two, and its empirical formula is C3H5.
Learn more about the cyclopropyl group at
https://brainly.com/question/29676190?referrer=searchResults
#SPJ4
Which one of the following types of radiation has the shortest wavelength, the greatest energy, and the highest frequency? a. Ultraviolet radiation. b. Infrared radiation. c. Visible red light. d. Visible blue light.
Among the given radiations, the one with shortest wavelength, highest energy and highest frequency is ultraviolet radiation.
What is electromagnetic spectrum?Electromagnetic spectrum is the arrangement of different radiations in the order of decreasing wavelength or increasing frequency. The wavelength of an electromagnetic wave is inversely proportional to the frequency and energy.
Thus, as the frequency increases energy of the wave increases and wavelength decreases. The order of waves in the decreasing order of wavelength is, radio waves, microwaves, infrared, visible, ultraviolet, x-ray and gamma ray.
Thus, among the given radiation, the highest energy, highest frequency and shortest wavelength is ultraviolet radiation.
To find more on ultraviolet radiation, refer here:
https://brainly.com/question/14504556
#SPJ1
when acid is added to the blood buffer system, the in the blood reacts with the from the acid to neutralize it.
When acid is added to the blood buffer system. Overall, the buffer system in the blood plays a vital role in maintaining the pH of the blood and helping to ensure that the body functions properly.
When acid is added to the blood, it can disrupt the balance of acid and base (pH) in the blood. The body has several mechanisms in place to maintain a relatively constant pH in the blood, known as acid-base homeostasis. One of these mechanisms is the buffer system. A buffer system is a solution that helps to maintain the pH of a solution by resisting changes in pH when an acid or base is added. The buffer system in the blood consists of several different components, including bicarbonate, carbonic acid, and hemoglobin. When acid is added to the blood, the bicarbonate ions in the blood react with the hydrogen ions from the acid to form carbonic acid, which can then dissociate into water and carbon dioxide. This reaction helps to neutralize the acid and maintain the pH of the blood. Similarly, when a base is added to the blood, the carbonic acid in the blood reacts with the hydroxide ions from the base to form bicarbonate ions and water, which helps to neutralize the base and maintain the pH of the blood.
To know more about acid please refer: https://brainly.com/question/14072179
#SPJ4
What is an example of a change in the genetic traits of an organism due to human influence? OA. Humans breed dogs to be smaller and more friendly. B. Humans train dolphins to perform tricks for audiences at an aquarium. C. Humans destroy a tree frog's habitat, and the tree frogs become extinct. D. Humans feed bears, and the bears begin to enter campsites to look for food.
An example of human intervention in the genes is; humans breed dogs to be smaller and more friendly. Option A
What is the gene?We know that the gene is the unit of inheritance that can be found in the chromosome of the organism. The genes that the organism does have is what would tell must the observed traits of the organism and this is called the phenotype of the organism.
We know that human's do have an impact with the fact that the genes can spread in an organism. In many cases, we can see the alteration of the genes when we deal with the genetic make up of the pets.
Learn more about genes:https://brainly.com/question/8832859
#SPJ1
which of the following compounds contains the most polar bonds? atom (en): h (2.1); s (2.5); p (2.1); as (2.1); cl (3.0); si (1.8); sb (1.9)
The H2O bond is the most polar because the difference in electronegativity between H and O is at its highest.
Since each of the molecules in the set contains hydrogen and another element, the bond that fluorine makes with the hydrogen molecule will be the most polar of the group since fluorine is the most electronegative element in the periodic table. Check each bond's atoms' electronegativity properties. The most polar link will match the difference in electronegativity that is highest. The response is (b) N–H. The short answer is that because nitrogen is one of the most electronegative elements in the periodic table, its bond with hydrogen will be the most polar of all those mentioned.
Learn more about electronegativity here-
https://brainly.com/question/17762711
#SPJ4
choose the response that includes all the items listed below that are pure substances. i. orange juice ii. steam iii. ocean water iv. oxygen v. vegetable soup 1, 3, and 54 only 2 and 4 all of them are pure 1, 3, and 4
Given options (ii and iv) Steam and oxygen are pure substances.
A pure substance is what exactly?Pure substances include things like water, air, and nitrogen that have a constant chemical composition throughout. One element or compound does not necessarily make up a pure substance.
The number of different elements and/or compounds that make up a substance can help you determine whether it is pure. It is a pure substance if it only consists of that one type of element or compound.
A form of matter known as a pure substance has properties that are constant throughout the sample and a constant composition that is the same everywhere.
To know more about pure substances visit:
https://brainly.com/question/24462192
#SPJ1
