Which one of the four levels of organization include the other three levels

A. Community
B. Ecosystem
C. Organism
D. Population

Answer:

P₂ = 113.49 kPa

Explanation:

Given that,

Initial pressure, P₁ = 101 kPa

Initial temperature, T₁ = 10.0°C = 283 K

Final temperature, T₂ = 45°C = 318 K

The relation between pressure and temperature is given by :

[tex]\dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]

Where

P₂ is the new pressure

So,

[tex]P_2=\dfrac{P_1T_2}{T_1}\\\\P_2=\dfrac{101 \times 318}{283 }\\\\P_2=113.49\ kPa[/tex]

So, the new pressure is equal to 113.49 kPa.

Answer:Magnesium (Mg) is a - reactant

Hydrogen (H2) is a - product

magnesium chloride (MgCI2) is a - product

hydrochloric acid (HCI) is a - reactant

Explanation: It’s in my notes

Answer:

molecule is a group of atoms bonded together representing the smallest fundamental unit of a chemical reaction

Answer:

The densest ocean water is formed in two primary locations near the poles, where the water is very cold and highly saline as a result of ice formation. The densest deep water mass is formed in the Weddell Sea of Antarctica, and becomes the Antarctic Bottom Water (AABW).

Explanation:

The densest ocean water is formed in two primary locations near the poles, where the water is very cold and highly saline as a result of ice formation. The densest deep water mass is formed in the Weddell Sea of Antarctica, and becomes the Antarctic Bottom Water (AABW).

Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. Therefore, north Atlantic Ocean is the region of Atlantic Oceans where dense waters will likely sink.

Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water.

Mathematically,

Density = Mass of the metal ball ÷volume marked on the graduated cylinder

North Atlantic Ocean is the region of Atlantic Oceans where dense waters will likely sink. Here, water is very cold and salty which makes the water denser.

Therefore, north Atlantic Ocean is the region of Atlantic Oceans where dense waters will likely sink.

To know more about density, here:

https://brainly.com/question/16894337

#SPJ2

Answer:

There is a hack in forms that forms gives u the answer hold ctrl + u, and scrool to the bottom he read the part with the question and there will be an answer.

Mark as brainliest if im right good luck

Answer: B

Explanation: sorry if I'm too late but i just did this question and that was the right answer

Answer: approximately 15.1 grams.

Explanation: The key to chemistry is to change everything to moles. Then when you have the answer in moles change the answer back to grams, liters, or whatever you want. Change 25 grams of potassium chlorate to moles. Chlorate is Cl with 3 oxygens. ate = saturated. Chlorine has seven valance electrons when it is saturated six of these electrons are used by oxygen ( 2 electrons per oxygen) leaving only 1 electron. 1 K x 39 grams/mole+1 Cl x 35.4grams/ mole+3 O x 16 grams/ mole = 122.4 grams / mole Potassium Chlorate 25 122.4 = moles. 2.05 moles of Potassium Chlorate. There is a 1:1 mole ratio. 1 mole of Potassium Chlorate will produce 1 mole of Potassium Chloride. 2.05 moles of Potassium Chlorate will produce 2.05 moles of Potassium Chloride. Find the gram molecular mass of Potassium Chloride. 1 K x 39 = 39+1 Cl x 35.4 = 35.4 = 74.4 grams / mole. 2.05 moles x 74.4 grams/ mole = 15.2 grams

The mass of O₂ that will be form is 9.8 grams

The chemical reaction is as follows:

2KClO₃ → 2KCl + 3O₂

From the reaction 2 moles of potassium trichlorate decompose to form 2 moles of potassium chloride and 3 moles of oxygen.

Therefore,

molar mass of KClO₃ = 39 + 35.5 + 48 = 122.5 grams

molar mass of O₂ = 32 grams

Therefore,

2(122.5) g of  KClO₃ produces 3(32) grams of O₂

25 g of KClO₃ will produce ? grams of  O₂

cross multiply

mass of O₂  produced = 96 × 25 / 245

mass of O₂  produced = 2400 / 245

mass of O₂  produced = 9.7959

mass of O₂  produced ≈ 9.8 grams

learn more: https://brainly.com/question/15568949?referrer=searchResults

Answer:

47.27 g HNO₃

Explanation:

The reaction between nitric acid (HNO₃) and calcium hydroxide (Ca(OH)₂) is the following:

2HNO₃(aq) + Ca(OH)₂(aq) → Ca(NO₃)₂ + 2H₂O(l)

According to the chemical equation, 2 moles of HNO₃ reacts with 1 mol of Ca(OH)₂. At the point of total neutralization, the total number of moles of  HNO₃ reacts with the total number of moles of Ca(OH)₂:

2 x moles HNO₃ = moles Ca(OH)₂

The number of moles is equal to the product of molarity of the solution (M) and the volume in liters (V):

M(HNO₃) = ?

M(Ca(OH)₂) = 0.73 M

V(HNO₃) = 25.00 mL x 1 L/1000 mL = 0.025 L

V(Ca(OH)₂) = 51.4 mL x 1 L/1000 mL = 0.0514 L

So, we can write the equation at neutralization point as:

2 x (M(HNO₃) x V(HNO₃)) = M(Ca(OH)₂) x V(Ca(OH)₂)

From this, we can calculate the molarity of HNO₃:

M(HNO₃) = (M(Ca(OH)₂) x V(Ca(OH)₂))/2 x V(HNO₃)

               = (0.73 M x 0.0514 L)/(2 x 0.025 L)

               = 0.75 M HNO₃

We can convert the molarity from M (mol/L) to g/L by using the molecular weight of HNO₃:

Mw(HNO₃) = 1 g/mol H + 14 g/mol N + (3 x 16 g/mol O) = 63 g/mol

Finally, we multiply the molarity by the molecular weight to obtain the grams of nitric acid per liter of solution:

0.75 mol/L HNO₃ x 63 g/mol = 47.27 g HNO₃

You can download answer here

tinyurl.com/wpazsebu

Answer: Acids have a pH of less than 7 and generally form [tex]H^+[/tex] when dissolved in solution. [tex]H_2SO_4[/tex] is an example of acid.

Bases  have a pH of more than 7 and generally form [tex]OH^-[/tex] when dissolved in solution. [tex]Ca(OH)_2[/tex] is an example of base.

Water is neutral and has a pH of  exactly 7. Therefore in chemical equations it can act as acid or a base.

Explanation:

pH or pOH is the measure of acidity or alkalinity of a solution.  pH is calculated by taking negative logarithm of hydrogen ion concentration.

[tex]pH=-\log [H^+][/tex]

pH values range from 1 to 14. Acids have a pH range from 1 to 6.9, water is neutral with pH of 7 and bases have pH ranging from 7.1 to 14.

Acids form hydrogen ions when dissolved in water and bases form hydroxide ions when dissolved in water. Water [tex]H_2O)[/tex] is amphoteric and thus can behave as an acid or a base.

[tex]H_2SO_4\rightarrow 2H^++SO_4^{2-}[/tex]

[tex]Ca(OH)_2\rightarrow Ca^{2+}+2OH^[/tex]

Answer:

there is no question posted

Answer:

False

Explanation:

Answer:

true

Explanation:

i dont know if you want more info on how it is true just tell me if you do and i will add it in

Answer:

Wind is Air in a natural motion, as that moving horizontally at any velocity along the earth's surface.

Answer:

Nope not all

Explanation:

As scientists says that not all give a solution.

Answer:

1. Land 2. open 3. broken 4. Lava matter 5. Force of the plates

Answer:chemical

Explanation:

Answer:

1. a body of air with horizontally uniform temperature, humidity, and pressure.

2. Boundaries between unlike air masses. Air masses have fairly uniform temperature and moisture content in horizontal direction (but not uniform in vertical). Air masses are characterized by their temperature and humidity properties.

3. Air masses have fairly uniform temperature and moisture content in horizontal direction (but not uniform in vertical). Air masses are characterized by their temperature and humidity properties.

4. Continental air masses are characterized by dry air near the surface while maritime air masses are moist. Polar air masses are characterized by cold air near the surface while tropical air masses are warm or hot.

5. Continental air masses form over land and are dry. Therefore, an air mass that develops over northern Canada is called a continental polar air mass and is cold and dry. One that forms over the Indian Ocean is called a maritime tropical air mass and is warm and humid.

6. an air mass that develops over northern Canada is called a continental polar air mass and is cold and dry.

7. Commonly, when the cold front is passing, winds become gusty; there is a sudden drop in temperature, and heavy rain, sometimes with hail, thunder, and lightning.

8. stormy

9. The symbol that is used to identify a cold front on a weather map is a blue line with triangles that point in the direction in which the cold front is moving. The line is represents the leading edge of the cooler air mass.

10. The symbol that is used to identify a cold front on a weather map is a blue line with triangles that point in the direction in which the cold front is moving. The line is represents the leading edge of the cooler air mass

11. Because a stationary front marks the boundary between two air masses, there are often differences in air temperature and wind on opposite sides of it. The weather is often cloudy along a stationary front, and rain or snow often falls, especially if the front is in an area of low atmospheric pressure.

12. At an occluded front, the cold air mass from the cold front meets the cool air that was ahead of the warm front. The warm air rises as these air masses come together. Occluded fronts usually form around areas of low atmospheric pressure.

13. The temperature drops as the warm air mass is occluded, or “cut off,” from the ground and pushed upward. Such fronts can bring strong winds and heavy precipitation. Occluded fronts usually form around mature low pressure areas.

14.An occluded front is a combination of those two signs. They are indicated on a weather map either by a purple line with alternating semicircles and triangles pointing in direction of travel, or by red semicircles and blue triangles pointing in the same direction.

Explanation:

:)

Answer:

Heya

Explanation:

1) air mass:- An air mass is a large volume of air in the atmosphere that is mostly uniform in temperature and moisture.

2) Air masses are characterized by their temperature and humidity properties.

3) ( same answer i.e. temperature and humidity properties).

4) Colder air masses are termed polar or arctic, while warmer air masses are deemed tropical. Continental and superior air masses are dry while maritime and monsoon air masses are moist. Weather fronts separate air masses with different density (temperature or moisture) characteristics.

5) Continental air masses are characterized by dry air near the surface while maritime air masses are moist. Polar air masses are characterized by cold air near the surface while tropical air masses are warm or hot. Arctic air masses are extremely cold.

6) Maritime air masses form over water and are humid. Continental air masses form over land and are dry. Therefore, an air mass that develops over northern Canada is called a continental polar air mass and is cold and dry.

7) Commonly, when the cold front is passing, winds become gusty; there is a sudden drop in temperature, and heavy rain, sometimes with hail, thunder, and lightning. Lifted warm air ahead of the front produces cumulus or cumulonimbus clouds and thunderstorms.

8) Warm fronts often bring stormy weather as the warm air mass at the surface rises above the cool air mass, making clouds and storms. Warm fronts move more slowly than cold fronts because it is more difficult for the warm air to push the cold, dense air across the Earth's surface.

9) The symbol that is used to identify a warm front on a weather map is a red line with half circles that point in the direction in which the warm front is moving. The line represents the leading edge of the warmer air mass.

10) On weather maps, the surface position of the cold front is marked with the symbol of a blue line of triangles/spikes (pips) pointing in the direction of travel.

11) Because a stationary front marks the boundary between two air masses, there are often differences in air temperature and wind on opposite sides of it. The weather is often cloudy along a stationary front, and rain or snow often falls, especially if the front is in an area of low atmospheric pressure.

12)At an occluded front, the cold air mass from the cold front meets the cool air that was ahead of the warm front. The warm air rises as these air masses come together. Occluded fronts usually form around areas of low atmospheric pressure.

13) The warm air mass rises as the cool air masses push and meet in the middle. The temperature drops as the warm air mass is occluded, or “cut off,” from the ground and pushed upward. Such fronts can bring strong winds and heavy precipitation. Occluded fronts usually form around mature low pressure areas.

14)Occluded fronts are drawn as a solid purple line with half circles and triangles pointing in the direction that the front is moving. An occluded front usually brings dry air.

[tex] \underline \blue{ \fbox{check \: the \: attachment \: too \: :) }}[/tex]

Answer:

1. in the Northern Hemisphere the vernal equinox falls about March 20 or 21, as the Sun crosses the celestial equator going north. In the Southern Hemisphere the equinox occurs on September 22 or 23, when the Sun moves south across the celestial equator.

Explanation:

Hope this helps ^^

Answer: Lithium, an alkali metal with three electrons, is also an exception to the octet rule. Lithium tends to lose one electron to take on the electron configuration of the nearest noble gas, helium, leaving it with two valence electrons. There are two ways in which atoms can satisfy the octet rules.

Explanation: Hope this helped! :)

Answer:

Carbohydrates

Explanation:

this is because cytoplasm is a substance that fills living cells.

Answer:

Intervention of Maillard reactions by the addition of natural and synthetic chemical compounds has previously been directed toward removing one of the reactants (the amino groups or the reducing sugars) or adding sulfur-containing compounds, such as sulfur dioxide or N-acetyl cysteine, which inhibit the reactions

Explanation:

Answer:

1.99M

Explanation:

Molality can be calculated by dividing the moles of solute by the mass of the solvent i.e.

Molality (M) = n of solute (mol) ÷ mass of solvent (kg)

Based on the information, mass of HCl (solute) = 18.2g, mass of solvent (water) = 250.0g

mole of solute = mass/molar mass

Molar mass of HCl = 1 + 35.5 = 36.5g/lol

mole = 18.2/36.5

mole = 0.499mol

Mass of solvent = 250.0g

In Kg, mass of water = 250/1000

= 0.250Kg

Molality = 0.499/0.250

Molality = 1.996

Molality of the solution = 1.99M

Answer:

I'd Go. B. weigh everything, let the reaction happen, then weigh everything again.

Answer:

B is the right answer

carbohydrates are not found inside the cytoplasm so therefore it is B

Answer:

D

Explanation:

The cytoplasm is composed of water, salt and some organic molecules. (e.g. carbohydrates)

Answer: Nerves, Brain and spinal cord

Explanation:the other choices are either part of the cardiovascular system or the respiratory system

Answer:

carbon monoxide (CO)

Explanation:

carbon monoxide (CO) is oxidized because it gains oxygen to turn to carbon dioxide (CO2)

Answer:

In order to be able to solve this problem, you will need to know the value of water's specific heat, which is listed as

c=4.18Jg∘C

Now, let's assume that you don't know the equation that allows you to plug in your values and find how much heat would be needed to heat that much water by that many degrees Celsius.

Take a look at the specific heat of water. As you know, a substance's specific heat tells you how much heat is needed in order to increase the temperature of 1 g of that substance by 1∘C.

In water's case, you need to provide 4.18 J of heat per gram of water to increase its temperature by 1∘C.

What if you wanted to increase the temperature of 1 g of water by 2∘C ?

This will account for increasing the temperature of the first gram of the sample by n∘C, of the the second gramby n∘C, of the third gram by n∘C, and so on until you reach m grams of water.

And there you have it. The equation that describes all this will thus be

q=m⋅c⋅ΔT , where

q - heat absorbed

m - the mass of the sample

c - the specific heat of the substance

ΔT - the change in temperature, defined as final temperature minus initial temperature

In your case, you will have

q=100.0g⋅4.18Jg∘C⋅(50.0−25.0)∘C

q=10,450 J

Answer:

Hydrogen and Chlorine

ie HCL

The pairs of chemical elements that will combine to produce a covalent bond is: 1. Hydrogen and chlorine.

In Chemistry, the three (3) main types of chemical bonds include:

A covalent bond can be defined as a type of bond that typically involves the sharing of electrons between the atoms of a chemical element.

For example, the type of bond that is produced (formed) between hydrogen atoms and a chlorine atom is a covalent bond.

The hydrogen atom shares it single electron with a chlorine atom that is having seven (7) valence electrons to produce an inert gas such as hydrochloric acid (HCL).

In conclusion, the pairs of chemical elements that will combine to produce a covalent bond is hydrogen and chlorine.

Read more: https://brainly.com/question/24212500

Answer:

B. More reactant is added.

Explanation:

The question basically asks at which condition would the forward reaction be favoured.

The law of equilibrium states when a system at equilibrium is disturbed by, it would annul that change. In order to increase the forward reaction, more of the reactant should be added. In order to annul this change, the system would have to favour the reaction that deals with reducing the amount of reactant added.

The correct option is;

B. More reactant is added.