Answer:
A.Off grid homes
Explanation:
Specific type of insurance policy covers the most common perils except those specifically excluded perils such as earthquake, flood, nuclear disaster, landslide.
OFF GRID HOMES refer to homes which are self-sufficient without reliance on modern technology and public utilities. That means that this homes do not have access to electricity, gas, water, etc.
Therefore, these homes can be insured by a specific type of insurance policy.
The off-grid homes should be covered by a specific type of insurance policy.
The following information should be considered:
The specific insurance refers to the type of property insurance where only one person's property should be covered by the policy.It should be possible for the one property for the coverage that too is done from a specific insurance policy.Therefore the other options are incorrect.
Learn more about the insurance here: brainly.com/question/13293881
During normal economic times, unemployment in Europe tends to be ________ than in the United States mainly because of ________.
Answer:
higher; labor market regulations
Explanation:
I hope this helps you!
The Lime Corporation has obtained the following sales forecast data:
July August September October
Cash sales $ 80,000 $ 70,000 $ 50,000 $ 60,000
Credit sales $ 240,000 $ 220,000 $ 180,000 $ 200,000
The regular pattern of collection of credit sales is 20% in the month of sale, 70% in the month following the month of sale, and the remainder in the second month following the month of sale. There are no bad debts. The budgeted cash receipts for October would be:_________
a. $188.000
b. $248,000
c. $226,000
d. $278,000
e. none of above
Answer:
b. $248,000
Explanation:
The computation of the cash receipts for October would be
Particulars October
Cash sales $60000
August credit Sales $22000 (10% of $220,000)
September Credit Sales $126000 (70% of $180,000)
October credit Sales $40000 (20% of $200,000)
Budgeted cash receipt $248000
Hence, the correct option is b.
Trader M places a System Order to buy 100 shares of ABC stock at a price two cents below the best non-Nasdaq participant on the same side of the market. This is what type of order
Answer:
Limit order
Explanation:
There are various types of orders placed on nasdaq. These order include, market orders, limit order, All or none order, Immediate or cancel order and like wise. When a buyer places an order to buy the stock below current market price, this is type of limit order.
A stock just paid an annual dividend of $1.10. The dividend is expected to increase by 10 percent per year for the next two years and then increase by 2 percent per year thereafter. The discount rate is 14 percent. What correctly computes the current stock price?
Answer: $10.79
Explanation:
This requires the use of the Dividend Discount Model.
The price of the stock is the present value of the dividends for the two years and then the Terminal value.
Terminal value = Third year dividend / (Required return - Growth rate)
= (1.10 * 1.10² * 1.02) / (14% - 2%)
= 1.35762 / 12%
= $11.31
Price of stock is:
= Present value of first year dividend + Present value of second year dividend + Present value of Terminal value
= ((1.10 * 1.1) / 1.14) + (( 1.10 * 1.1²) / 1.14²) + (11.31 / 1.14²)
= $10.79
You are evaluating a growing perpetuity investment from a large financial services firm. The investment promises an initial payment of $2,176 at the end of this year and subsequent payments that will grow at a rate of 3.4 percent annually. If you use a 9 percent discount rate for investments like this, what is the present value of this growing perpetuity?
Answer:
the present value of this growing perpetuity is $83,692.31
Explanation:
The computation of the present value of this growing perpetuity is shown below:
present value of this growing perpetuity is
= Payment at end of this year ÷ (Discount rate - Growth rate)
= $2,176 ÷ (0.09-0.034)
= $83,692.31
Hence, the present value of this growing perpetuity is $83,692.31
Mohave Corp. is considering outsourcing production of the umbrella tote bag included with some of its products. The company has received a bid from a supplier in Vietnam to produce 8,000 units per year for $7.50 each. Mohave has the following information about the cost of producing tote bags:
Direct materials $3
Direct labor 2
Variable manufacturing overhead 1
Fixed manufacturing overhead 2
Total cost per unit $8
Mohave has determined that all variable costs could be eliminated by outsourcing the tote bags, while 60 percent of the fixed overhead cost is unavoidable. At this time, Mohave has no specific use in mind for the space currently dedicated to producing the tote bags.
Required:
1. Compute the difference in cost between making and buying the umbrella tote bag.
2. Based strictly on the incremental analysis, should Mohave buy the tote bags or continue to make them?
3. Suppose that the space Mohave currently uses to make the bags could be utilized by a new product line that would generate $10,000 in annual profits. Recompute the difference in cost between making and buying the umbrella tote bag. Does this change your recommendation to Mohave? If so, how?
4. Assume Mohave has a sustainability goal to increase the percentage of spending from local suppliers. If Mohave’s managers are responsible for improving this metric, how might it impact their sourcing decisions?
5. What other strategic or sustainability-related goals should Mohave consider before making a final decision?
Answer:
Mohave Corp.
1. Cost Differences:
Relevant costs:
Make Buy Difference
Direct materials $3
Direct labor 2
Variable manufacturing overhead 1
Fixed manufacturing overhead 0.80
Total cost per unit $6.80 $7.50 $0.70
Annual Units 8,000 8,000 8,000
Total costs $54,400 $60,000 $5,600
2. Based strictly on the incremental analysis, Mohave should continue to make the tote bags.
3. The recommendation is changed. Mohave should buy the tote bags from outside. Buying from outside increases operating income by $4,400.
Explanation:
a) Data and Calculations:
Price per unit from outside supplier = $7.50
Direct materials $3
Direct labor 2
Variable manufacturing overhead 1
Fixed manufacturing overhead 2
Total cost per unit $8
Relevant costs:
Make Buy Difference
Direct materials $3
Direct labor 2
Variable manufacturing overhead 1
Fixed manufacturing overhead 0.80
Total cost per unit $6.80 $7.50 $0.70
Annual Units 8,000 8,000 8,000
Total costs $54,400 $60,000 $5,600
Relevant costs:
Make Buy Difference
Direct materials $3
Direct labor 2
Variable manufacturing overhead 1
Fixed manufacturing overhead 0.80
Total cost per unit $6.80 $7.50 $0.70
Annual Units 8,000 8,000 8,000
Total costs $54,400 $60,000 $5,600
Annual profits from new product 0 (10,000) $10,000
Total net costs $54,400 $50,000 $4,400
Patty took a cash advance of $1,500. Her new credit card charges an Annual Percentage Rate of 21%. The transaction fee for the cash advance is 3% of the amount of the advance, with a minimum fee of $35. This fee is added to the total cash advance, and accrues interest.
Hint: calculate 3% of 1,500. Add that 3% to the original cash advance of 1,500. This becomes your charged amount.
If Patty makes monthly payments of $65:
What is the total amount Patty will end up paying for the cash advance?
How are changes in U.S. demographics affecting the workplace relative to demographic changes in our traditional competitors
Answer:
The changes in demographics are affecting the workplaces in both positive and negative manner. With continuous immigration of workforce from Asian countries and neighbor countries like Mexico, America is facing some serious crises of jobs shortage.
On the other hand, due to such import of human resource companies are able to get best talent inn hand to operate their activities.
MC Qu. 120 Dallas Company uses a job order... Dallas Company uses a job order costing system. The company's executives estimated that direct labor would be $4,160,000 (260,000 hours at $16/hour) and that factory overhead would be $1,560,000 for the current period. At the end of the period, the records show that there had been 240,000 hours of direct labor and $1,260,000 of actual overhead costs. Using direct labor hours as a base, what was the predetermined overhead rate
Answer:
See below
Explanation:
Per the given details, predetermined overhead is be calculated as seen below
Predetermined overhead = (Estimated factory overhead / Estimated direct labor hour) × 100
Estimated factory overhead = $1,560,000
Estimated direct labor hour = 260,000
Predetermined overhead = )$1,560,000 / 260,000) × 100
Predetermined overhead rate = 600%
Song, Inc., uses the high-low method to analyze cost behavior. The company observed that at 22,000 machine hours of activity, total maintenance costs averaged $33.40 per hour. When activity jumped to 25,000 machine hours, which was still within the relevant range, the average total cost per machine hour was $30.40.On the basis of this information, the variable cost per machine hour was:___________A. $8.40.B. $22.00.C. $25.00.D. $30.40.E. $33.40.
Answer:
Variable cost per unit= $8.4
Explanation:
First, we need to calculate the total cost for each level of machine hours:
Low activity level:
Total cost= 22,000*33.4= $734,800
High activity level:
Total cost= 25,000*30.4= $760,000
Now, we can determine the variable and fixed costs:
Variable cost per unit= (Highest activity cost - Lowest activity cost)/ (Highest activity units - Lowest activity units)
Variable cost per unit= (760,000 - 734,800) / (25,000 - 22,000)
Variable cost per unit= $8.4
Fixed costs= Highest activity cost - (Variable cost per unit * HAU)
Fixed costs= 760,000 - (8.4*25,000)
Fixed costs= $550,000
Fixed costs= LAC - (Variable cost per unit* LAU)
Fixed costs= 734,800 - (8.4*22,000)
Fixed costs= $550,000
Contribution Margin Ratio a. Young Company budgets sales of $890,000, fixed costs of $26,000, and variable costs of $115,700. What is the contribution margin ratio for Young Company
Answer:
87 %
Explanation:
contribution margin ratio = Contribution ÷ Sales
therefore,
contribution margin ratio = ($890,000 - $115,700) ÷ $890,000
= 0.87 or 87 %
The contribution margin ratio for Young Company is 87 %.
what is another name for advertising?
Answer:
commercial, message, pitch
Explanation:
yes
Setting a passing score for whites at 80 out of 100 and a passing score of 60 out of 100 for minority applicants in an admission test is an example of race norming.
A. True
B. False
Answer: True
Explanation:
Race norming simply refers to the practice whereby two different cut off test scores are set for employment which is based on race. Race-norming, is also referred to as the within-group score conversion and it has to do with the adjustment of test scores in order to account for the ethnicity of the test-taker.
Since a passing score for whites was set at 80 out of 100 while a passing score of 60 out of 100 was set for the minority applicants, then it's an example of race norming.
The shareholders' equity of Green Corporation includes $232,000 of $1 par common stock and $430,000 par of 7% cumulative preferred stock. The board of directors of Green declared cash dividends of $53,000 in 2021 after paying $23,000 cash dividends in each of 2020 and 2019. What is the amount of dividends common shareholders will receive in 2021
Answer:
$8,700
Explanation:
Dividends payable to preferred shareholders = [($430,000*7%)*2 - ($23,000*2)] + ($430,000*7%)
Dividends payable to preferred shareholders = [$60,200 - $46,000] + $30,100
Dividends payable to preferred shareholders = $14,200 + $30,100
Dividends payable to preferred shareholders = $44,300
Dividend available to common shareholders = Total dividend - Dividends payable to preferred shareholders
Dividend available to common shareholders = $53,000 - $44,300
Dividend available to common shareholders = $8,700
So, the amount of dividends common shareholders will receive in 2021 is $8,700.
On January 1, 2019, Eagle Company borrows $23,000 cash by signing a four-year, 9% installment note. The note requires four equal payments of $7,099, consisting of accrued interest and principal on December 31 of each year from 2019 through 2022. Prepare the journal entries for Eagle to record the note's issuance and the four payments
Answer:
See below
Explanation:
January 01, 2019
Cash Dr $23,0000
______________Notes payable Cr $23,000
December 31, 2019
Interest expense Dr $2,070
($23,000 × 9%)
Notes payable Dr $5,029
____________________Cash Cr. $7,099
December 31, 2020
Interest expense Dr $1,617
($23,000 - $5,029) × 9%
Notes payable Dr $5,082
_________________ Cash Cr $7,099
December 31, 2021
Interest expense Dr $1,160
($23,000 - $5,029 - $5,082) × 9%
Notes payable Dr $5,939
___________________ Cash Cr $7,099
December 31, 2022
Interest expense Dr $626
($23,000 - $5,029 - $5,082 - $5,939) × 9%
Note payable Dr $6,473
_____________________ Cash Cr $7,099
The MD Fund has an expected return of 16% and a standard deviation of 20%. The risk-free rate is 4%. What is the reward-to-volatility (Sharpe) ratio for the MD Fund
Answer: 60% or 0.60
Explanation:
Sharpe ratio shows the risk adjusted return of an asset and then compares it to a risk-free asset to see if its returns are higher after it has been adjusted for risk.
Formula is:
= (Expected return - Risk free rate) / Standard deviation
= (16% - 4%) / 20%
= 12% / 20%
= 60% or 0.60
During a team meeting, a team member asks about the measurements that will be used on the project to assess performance. The team member feels that some of the measures related to the activities assigned to him are not valid measurements. The project is BEST considered to be in what part of the project management process?
Answer:
The answer is "Executing".
Explanation:
In this inquiry, it is stated that certain of the measurements used to evaluate a team member's efforts are deemed invalid. As a result, he'll have to work during the project's executing phase, when project deliverables are created and project participants execute the majority of the labor. During this team meeting, one of the members inquires about the project's performance measurements, that's why Executing is the correct choice.
A competitive market analysis takes into consideration?
Answer:
A competitive analysis is the process of identifying your competitors and evaluating their strategies to determine their strengths and weaknesses relative to your own business, product, and service. The goal of the competitive analysis is to gather the intelligence necessary to find a line of attack and develop your go-to-market strategy.Explanation:
#AnswerForTreesBrenda, the sales manager of a firm, wants to generate a particular report containing sales analyses of the second and third quarter of the year. She should use a ________ to retrieve the information that she wants from the database. Group of answer choices
Answer: query
Explanation:
Since Brenda wants to generate a particular report containing sales analyses of the second and third quarter of the year, then she should use a query to get the information.
The query refers to a request that can be used to get data or information from the database table. The data gotten can be in form of graphs, pictorials or complex results, such as trend analyses etc
When equipment is sold for cash, the amount received is reflected as a cash :_________ a) inflow in the operating section. b) inflow in the financing section. c) inflow in the investing section. d) outflow in the operating section.
Answer: c. inflow in the investing section
Explanation:
The cash flow statement is prepared in order to determine the ending cash balance which is done by considering the cash that's generated from various activities of the business.
Equipment is regarded as a long term asset, and therefore when it's sold for cash, it's being regarded as an indicator for investing activities section.
Suppose that $1 lottery tickets have the following probabilities and values: 1 in 5 to win a free ticket (worth $1), 1 in 100 to win $5, 1 in 100,000 to win $1000, and 1 in 10 million to win $1 million. What is the expected value of a lottery ticket to the consumer
Answer:
$0.36
Explanation:
Expected value of the lottery ticket = (p1 x a1) + (p2 x a2) + (p3 x a3) + (p4 x a4)
p1 = probability of winning $1 = 1/5 = 0.2
a1 = $1
p2 = probability of winning $5 = 1/100 = 0.01
a2 = $5
p3 = probability of winning $1000 = 1/100,000 = 0.00001
a3 = $1000
p4 = probability of winning $1 million = 1/10,000,000 = 0.0000001
a4 = $1 million
(0.2 x 1) + (0.01 x 5) + (0.00001 x 1000) + (1,000,000 x 0.00001) = $0.36
A company makes a payment of $4,680 towards one-year insurance premium on March 1. Calculate the amount of prepaid insurance that should be reported on the August 31 balance sheet with respect to this policy.
Answer: $2,340
Explanation:
The total annual insurance is $4,680. This is prepaid insurance however and will need to be apportioned to months within the year in order to be recognized as an expense as the months go by.
The monthly insurance will be:
= 4,680 / 12 months
= $390
From March 1 to August 31 is 6 months. Total insurance recognized will be:
= 390 * 6
= $2,340
Which of the following is a component of the talent acquisition function of HR management?
Group of answer choices
Recruiting
Training
Career planning
Orientation
Answer:
Recruiting
Explanation:
Recruitment is the process of hiring individuals in an organization to accomplish the tasks assigned. It is the process carried by the Human Resource Management in an organization. The HR management is responsible to organize and manage the human talents and recruit them respectively. The talent are recognized by the team and are hired to meet the goals of the organization.
Sardi Inc. is considering whether to continue to make a component or to buy it from an outside supplier. The company uses 17,000 of the components each year. The unit product cost of the component according to the company's cost accounting system is given as follows:
Direct materials $ 8.20
Direct labor 8.30
Variable manufacturing overhead 1.20
Fixed manufacturing overhead 4.30
Unit product cost $ 22.00
Assume that direct labor is a variable cost. Of the fixed manufacturing overhead, 70% is avoidable if the component were bought from the outside supplier. In addition, making the component uses 2 minutes on the machine that is the company's current constraint. If the component were bought, time would be freed up for use on another product that requires 4 minutes on this machine and that has a contribution margin of $7.00 per unit. When deciding whether to make or buy the component, what cost of making the component should be compared to the price of buying the component?
A) $20.71 per unit.
B) $22.00 per unit.
C) $25.50 per unit.
D) $24.21 per unit.
1 points Time Remaining 41 minutes 43 seconds00:41:43 Item 13 Time Remaining 41 minutes 43 seconds00:41:43 Richards Corporation uses the FIFO method of process costing. The following information is available for October in its Fabricating Department: Units: Beginning Inventory: 80,000 units, 60% complete as to materials and 20% complete as to conversion. Units started and completed: 250,000. Units completed and transferred out: 330,000. Ending Inventory: 30,000 units, 40% complete as to materials and 10% complete as to conversion. Costs: Costs in beginning Work in Process - Direct Materials: $37,200. Costs in beginning Work in Process - Conversion: $79,700. Costs incurred in October - Direct Materials: $646,800. Costs incurred in October - Conversion: $919,300. Calculate the equivalent units of materials.
Answer:
1000$
Explanation:
no why sorry lol i just count in my brain lol
Alliances are often used to pursue business-level goals, but they may be managed at the corporate level. Explain why this portfolio approach to alliance management would make sense.
Answer:
mainly because of information
Explanation:
This approach makes sense mainly because of information. Business-level goals are all about performance and profit. Corporate is made up of individuals that are invested in the company itself. They have all the information on what the company wants to accomplish, long-term strategies being used, available resources, etc. Most of this information is closed off to the rest of the company and only available to those in Corporate. This information is what leads to informed decisions which allow for the best, most efficient, and most profitable choices to be made.
The concept of market efficiency underpins almost all financial theory and decision models. When financial markets are efficient, the price of a security—such as a share of a particular corporation’s common stock—should be____the present value estimate of the firm’s expected cash flows discounted by its appropriate rate of return (also called the intrinsic value of the stock).
Almost all financial theory and decision models assume that the financial markets are efficient. The informational efficiency of financial markets determines the ability of investors to "beat" the market and earn excess (or abnormal) becomes available. Financial theorists have identified three levels of informational efficiency that reflect what information is incorporated in stock prices.
Consider the following statement, and identify the form of capital market efficiency under the efficient market hypothesis based on this statement.
Current market prices reflect all relevant publicly available information.
This statement is consistent with:_____.
A. Strong-form efficiency.
B. Weak-form efficiency.
C. Semistrong form efficiency.
Consider that there is a semistrong-form of efficiency in the markets.
A pharmaceutical company announces that it has received Federal Drug Administration approval for a new allergy drug that completely prevents hay fever The consensus analyst forecast for the company's earnings per share (EPS) is $4.50, but insiders know that, with this new drug, earnings will increase and drive the EPS to $5.00. What will happen when the company releases its next earnings report?
A. There will be some volatility in the stock price when the earnings report is released: it is difficult to determine the impact on the stock price.
B. The stock price will not change, because the market already incorporated that information in the stock price when the announcement was made.
C. The stock price will increase and settle at a new equilibrium level.
Answer:
sry I don't know the answer
sry
The business cycle measures fluctuations in the long-run trend growth rate of GDP. fluctuations in the profit of businesses. fluctuations in consumption. short-run fluctuations in economic activity. fluctuations in the average tax rate paid by businesses.
Answer: short-run fluctuations in economic activity.
Explanation:
The business cycle helps explain fluctuations in economic activity within a period of time which makes it a short run measure. The cycle consists of expansion phases and recession phases which show that economic activity seems to expand and then go into a recession overtime.
The lowest point in the recession is called the depression and when this happens, the economy hits rock bottom and starts to expand after some time. This is what happened with the Great Depression and the Great Recession. The height of the expansion is the peak and here, the economy is at its most successful.
If the demand for a product was 16, 28, 20 and 24 units in four consecutive months, and the corresponding forecasts in those four months were 20, 16, 20 and 30 units respectively, what is the MAD at the end of four months
Answer:
5.5 units
Explanation:
Period Actual Forecast Absolute deviation
1 16 20 4
2 28 16 12
3 20 20 0
4 24 30 6
Total 22
Mean absolute deviation(MAD) = Sum of absolute deviation / Number of periods
Mean absolute deviation(MAD) = 22 / 4
Mean absolute deviation(MAD) = 5.5 units
The forecasted sales pertain to Arrow Corporation: Month Sales September $400,000 October 320,000 Finished Goods Inventory (August 31): 28,000 Arrow Corporation has a selling price of $5 on all units and expects to maintain ending inventories equal to 25 percent of the next month's sales. How many units does Arrow expect to produce in September
Answer:
68,000 units
Explanation:
The computation of the number of units that produced in september is given below;
The sales units at September is
= $400,000 ÷ 5
= 80,000 units
And, the october sales units is
= $320,000 ÷ 5
= 64,000 units
So, the production should be
= Ending finished units + sales units - beginning finished units
= (25% of 64,000 units) + 80,000 units - 28,000 units
= 16,000 units + 80,000 units - 28,000 units
= 68,000 units
