Answer:
creativity is the personal trait that scientists mainly depend upon when they design an experiment.
SOMEONE HELP PLEASE!
Answer:
The nose consists of the visible external nose and the internal nasal cavity. The nasal septum divides the nasal cavity into right and left sides. Air enters two openings, the external nares (nostrils; singular, naris), and passes into the vestibule and through passages called meatuses. The bony walls of the meatuses, called concha, are formed by facial bones (the inferior nasal concha and the ethmoid bone). From the meatuses, air then funnels into two (left and right) internal nares. Hair, mucus, blood capillaries, and cilia that line the nasal cavity filter, moisten, warm, and eliminate debris from the passing air.
The pharynx (throat) consists of the following three regions, listed in order through which incoming air passes:
The nasopharynx receives the incoming air from the two internal nares. The two auditory tubes that equalize air pressure in the middle ear also enter here. The pharyngeal tonsil (adenoid) lies at the back of the nasopharynx.
The oropharyrnx receives air from the nasopharynx and food from the oral cavity. The palatine and lingual tonsils are located here.
The laryngopharynx passes food to the esophagus and air to the larynx.
The larynx receives air from the laryngopharynx. It consists of several pieces of cartilage that are joined by membranes and ligaments, shown in Figure 2:
The epiglottis, the first piece of cartilage of the larynx, is a flexible flap that covers the glottis, the upper region of the larynx, during swallowing to prevent the entrance of food.
The thyroid cartilage protects the front of the larynx. A forward projection of this cartilage appears as the Adam's apple (anatomically known as the laryngeal prominence).
The paired arytenoid cartilages in the rear are horizontally attached to the thyroid cartilage in the front by folds of mucous membranes. The upper vestibular folds (false vocal cords) contain muscle fibers that bring the folds together and allow the breath to be held during periods of muscular pressure on the thoracic cavity (straining while defecating or lifting a heavy object, for example). The lower vocal folds (true vocal cords) contain elastic ligaments that vibrate when skeletal muscles move them into the path of outgoing air. Various sounds, including speech, are produced in this manner.
The cricoid cartilage, the paired cuneiform cartilages, and the paired corniculate cartilages are the remaining cartilages supporting the larynx.
The trachea (windpipe) is a flexible tube, 10 to 12 cm (4 inches) long and 2.5 cm (1 inch) in diameter (Figure 2).
The mucosa is the inner layer of the trachea. It contains mucus‐producing goblet cells and pseudostratified ciliated epithelium. The movement of the cilia sweeps debris away from the lungs toward the pharynx.
The submucosa is a layer of areolar connective tissue that surrounds the mucosa.
Hyaline cartilage forms 16 to 20 C‐shaped rings that wrap around the submucosa. The rigid rings prevent the trachea from collapsing during inspiration.
The adventitia is the outermost layer of the trachea. It consists of areolar connective tissue.
The primary bronchi are two tubes that branch from the trachea to the left and right lungs.
Inside the lungs, each primary bronchus divides repeatedly into branches of smaller diameters, forming secondary (lobar) bronchi, tertiary (segmental) bronchi, and numerous orders of bronchioles (1 mm or less in diameter), including terminal bronchioles (0.5 mm in diameter) and microscopic respiratory bronchioles. The wall of the primary bronchi is constructed like the trachea, but as the branches of the tree get smaller, the cartilaginous rings and the mucosa are replaced by smooth muscle.
Alveolar ducts are the final branches of the bronchial tree. Each alveolar duct has enlarged, bubblelike swellings along its length. Each swelling is called an alveolus. Some adjacent alveoli are connected by alveolar pores.
The respiratory membrane consists of the alveolar and capillary walls. Gas exchange occurs across this membrane. Characteristics of this membrane follow:
Type I cells are thin, squamous epithelial cells that constitute the primary cell type of the alveolar wall. Oxygen diffusion occurs across these cells.
Type II cells are cuboidal epithelial cells that are interspersed among the type I cells. Type II cells secrete pulmonary surfactant (a phospholipid bound to a protein) that reduces the surface tension of the moisture that covers the alveolar walls. A reduction in surface tension permits oxygen to diffuse more easily into the moisture. A lower surface tension also prevents the moisture on opposite walls of an alveolus or alveolar duct from cohering and causing the minute airway to collapse.
Alveolar macrophage cells (dust cells) wander among the other cells of the alveolar wall, removing debris and microorganisms.
I Wanted to ask.. it's a weird question I know or maybe it's gonna get reported But
Why is my friend so irritating..
Answer:
if hyper its probaly because the have ADHD which is a type of drug that helps people with behavior disorders . the might have ticks wich is something that people can not control.
Explanation:
which one of the following groups are decomposers a. algae b. protist c. fungi d. green plants e. photosynthetic bacteria
Answer:c
Explanation:
Select the correct answer from each drop-down menu.
Researchers stationed at different areas on a mountain and in a tunnel midway through the mountain boiled water at the same time. Even though the water at every station was at the same temperature, the pot at the top of the mountain started boiling before the others. Why?
Water boils when the vapor pressure is
the atmospheric pressure. The atmospheric pressure
at the top of the mountain.
Water boils when the vapour pressure is least the atmospheric pressure.
The atmospheric pressure is equal at the top of the mountain.
What is atmospheric pressure?The air around you has weight, and it presses against everything it touches. That pressure is called atmospheric pressure, or air pressure. It is the force exerted on a surface by the air above it as gravity pulls it to Earth.
As we go up in altitude the air pressure becomes less. When the pressure decreases, it takes less energy to get the water molecules to escape the surface. So the temperature is less than it would be at sea level.
Air pressure is higher or greater at the bottom of a mountain. This is because the height of the air above that level is thicker than at the top.
Pressure is given by the equation, P=rho*g*h, where rho is the air density, g is the gravity value and h is the thickness of the air layer on top of the level where we are considering the pressure.
Therefore, as we can see, at the bottom of the mountain, the thickness h of air is greater, and so is the pressure.
Hence, water boils when the vapour pressure is least the atmospheric pressure and the atmospheric pressure is equal at the top of the mountain.
Learn more about the atmospheric pressure here:
https://brainly.com/question/11484577
#SPJ2
define the clinical thermometer
Answer:
a small medical thermometer with a short but finely calibrated range, for taking a person's temperature.
Answer:
Thermometer which are used in clinical to measure the temperature of human body is called clinical thermometer.
Which feature does an iron metal have?
O electrons that transfer between atoms to make cations and anions
O a sea of electrons
O firmly bonded electrons
O electrons shared between single pairs of atoms
Answer:
a sea of electrons
Iron metal has a sea of electrons.
Iron metal is an element which possesses a sea of electrons as a result of it
containing cations which are usually surrounded by electrons which move at
a very fast pace .
This property makes Iron metal to be reactive when exposed to air( oxygen)
and it then forms various compounds such as Iron(II) oxide, Iron(III) oxide and
rust.
Read more on https://brainly.com/question/20466452
Identify the following as a chemical (C) or physical property (P):
1. blue color ______
2. melting point ______
3. density ______
4. reacts with water ______
5. flammability (burns) ______
6. solubility (dissolves) ______
7. boiling point ______
8. luster ______
Answer: 1. Phys 2. Phys 3. Phys 4. Chem 5. Chem 6. Phys 7. Phys 8. Phys
Explanation:
According to the concept of physical and chemical property ,reaction with water and flammability are chemical properties while rest are physical properties.
What are chemical properties?These properties are defined as those properties which become evident during or after a chemical reaction after the identity of the substance is changed during chemical reaction.
These properties cannot be determined externally just by viewing the substance ,these change immensely after a substance undergoes a chemical change.These are used for identification of unknown substances and for building up chemical classifications.
The major chemical properties are flammability,toxicity,reactivity,acidity and heat of combustion.For a chemical property to be apparent , it is necessary that the structure of the substance is altered.
Learn more about chemical properties,here:
https://brainly.com/question/5186976
#SPJ2
WILL GIVE BRAINLIEST
Answer: pretty sure it B
Explanation:
Answer:
the answer is b hope this helps
Explanation:
ffffxxxjehejr
Answer quickly plz. CO2 dissolving in bodies of water forms_____
which causes the pH to____? Fill in the blanks.
A. Carbonate Acid; decrease
B. Carbonic Acid; increase
C. Carbonic Acid; decrease
D.Carbonate Acid; increase.
CO2 dissolving in bodies of water forms carbonic acid which causes the pH to decrease.
Hope this helps! Please correct me if im wrong! :)
Answer:C. Carbonic Acid; decrease
Explanation:
Carbonic acid is formed and acid decrease pH
"Religion and culture are also affected by the climate and topographic diversity."
Justify this statement
Answer:
In a survey of a group of people, it was found that 60 0f them have
business, 45 have government jobs, 125 have farming, 27 have business
only, 15 have government job only, 10 have business and government
job only, 5 have government job and farming only.
i) How many people have all the profession?
ii) How many people were there in a survey?
5. Describe the effects of photons of light on an electron of the hydrogen atom
Answer:
How do atoms give off light?
Atoms emit light when they are heated or excited at high energy levels. The color of light that is emitted by an atom depends on how much energy the electron releases as it moves down different energy levels. ... It shows the electron moving down energy levels.
Explanation:
Match each atomic particle with the correct charge.
1. proton neutral
2. neutron positive
3. electron negative
The proton is a postitive charge, therefore, being 1 (proton) matched to positive. Whilst neutron (2) is matched to neutral. Thus electron (3) is matched to negative.
27.2Pb(NO3)2 --> 2Pb0 + 4NO2 + O2
O A. Synthesis
B. Single displacement
C. Decomposition
D. Combustion
under which conditions would the solubility of a gas be greatest
Answer:
when there is high pressure and low temperature then the solubility of a gas will be greatest.
Answer:
B
Explanation:
edg 2021
How many elements, compounds and atoms are in CH3COOH
Answer these three please! Thank you <3333
(I will give brainliest)
Answer:
Explanation:
21:B 22:B
Write the ionic equation, including state symbols, for the reaction between zinc and iron(II) sulfate
Answer:
Fe (s) + Cu^2+ (aq) + SO4^2- (aq) --> Cu (s) + Fe^2+ (aq) + SO4^2- (aq)
Explanation:
The water gained 900 J of energy, what was the energy change of the metal?
Answer:
it lost 900J of energy I will assume and that would mean the change in energy is -900J
Explanation:
As the first five elements in Group 14 are considered in order from top to bottom, there are changes in both the
A
electronegativity values and number of first shell electrons
B
electronegativity values and atomic radii
C
number of valence shell electrons and number of first shell electrons
D
number of valence shell electrons and atomic radii
Answer:
A
Explanation:
beacause in both the electronegativity values and number of first she'll electrons
In group 14 from top to bottom there are changes in both the electronegativity values and atomic radii changes.
What are groups?Groups in the periodic table are the columns in which elements are present which all are having same number of valence electrons.
On moving top to bottom in the 14th group of the periodic table:
Atomic size of the elements increases and electronegativity decreases.Number of electrons in the first shell of all elements will be same and in the outer most shell is also same.Hence electronegativity values and atomic radii changes.
To know more about groups of periodic table, visit the below link:
https://brainly.com/question/1645905
#SPJ2
what is cell explain in a paragraph
Answer:
Cells are the basic building blocks of living things. The human body is composed of trillions of cells, all with their own specialised function. Cells are the basic structures of all living organisms. Cells provide structure for the body, take in nutrients from food and carry out important functions.
How many
How long does it take to go
from a new moon to a third
quarter?
Answer:
about three weeks
Explanation:
because after a full moon, which is about 21 days, it comes to a third quarter moon
How many hydrogen atoms Is needed for C4H8 to become saturated
Answer:
2 atoms
Explanation:
Because it contain one double bond
what kind of chemical bond is established in hydrochloric acid?
Answer and Explanation:
HCl, also known as hydrochloric acid, has a covalent bond. The hydrogen (H) atom shares an electron with the chlorine (Cl) to form the bond.
8. __H2 + __O2-> __H2O
9. __K2SO4 + __H2-> __H2SO4 + __K
10. __NO2 + __H2O-> __HNO3 + __NO
Anser:
Explanation:
hope this helps
PLEASE HELPPP!!!!!! ASAP!!!!
Which of the following best describes cations? Question 19 options: A) They're negatively charged because they lost an electron. B) They're positively charged because they gained an electron. C) They're positively charged because the number of electrons remained the same. D) They're positively charged because they lost an electron.
Answer:D
Explanation:trust me bro
Answer:
D
Explanation: I took the test
What three types of particles make up an atom? What are their charges?
Answer:
Protons, neutrons, and electrons are the three main subatomic particles found in an atom. Protons have a positive (+) charge. An easy way to remember this is to remember that both proton and positive start with the letter "P." Neutrons have no electrical charge.
Answer:
Protons, positive charge
Neutrons, neutral
Electrons, negative charge
Explanation:
can someone please help me solve this? i dont understand this problem :(
Answer:
–4020 KJ
Explanation:
The following data were obtained from the question:
H₂(g) + F₂(g) —> 2HF(g) ΔH = –536 KJ
Next, we shall determine the mass of H₂ that reacted from the balanced equation to produce –536 KJ of heat energy. This can be obtained as follow:
Molar mass of H₂ = 2 × 1 = 2 g/mol
Mass of H₂ from the balanced equation = 1 × 2 = 2 g.
Summary:
From the balanced equation above,
2 g of H₂ reacted to produce –536 KJ of heat energy.
Finally, we shall determine the heat change produced by the reaction of 15 g of H₂. This can be obtained as follow:
From the balanced equation above,
2 g of H₂ reacted to produce –536 KJ of heat energy.
Therefore, 15 g of H₂ will react to produce = (15 × –536)/2 = –4020 KJ of heat energy.
Thus, the heat change for the reaction is –4020 KJ
Which statement about anabolism is true?
A. In anabolism, energy is released.
B. In anabolism, energy is absorbed.
C. In anabolism, energy is absorbed and then released.
O
D. In anabolism, energy is released and then absorbed.
Answer:
i would say B? Im sorry if im wrong
Explanation:
i think that because Catabolic reactions release energy, while anabolic reactions use up energy. Anabolism is the opposite of catabolism.
Answer:
B) In anabolism, energy is absorbed.
One of the steps to sweeten sour gas using the Claus process is reacting
hydrogen sulfide gas with sulfur dioxide gas to produce water vapour and sulfur.
16 H2S(g) + 8 SO2(g) → 16 H2O(g) + 3 Sg(s)
8.56 kL of hydrogen sulfide at 175 kPa and 250 °C reacts with excess sulfur
dioxide. Calculate the mass, in kg, of sulfur produced.
The mass, in kg, of Sulfur produced : 2.072 kg
Further explanationGiven
V = 8.56 kL = 8560 L
P = 175 kPa = 1,73 atm
T = 250 + 273 = 523 K
Required
mass of Sulfur produced
Solution
mol of H₂S :
[tex]\tt n=\dfrac{PV}{RT}\\\\n=\dfrac{1.73\times 8560}{0.082\times 523}\\\\n=345.3[/tex]
mol of Sulfur based on mol H₂S as a limiting reactant( excess Sulfur dioxide)
From equation, mol ratio H₂S : S = 16 : 3, so mol S :
[tex]\tt \dfrac{3}{16}\times 345.3=64.74[/tex]
Mass S(Ar = 32 g/mol) :
= mol x Ar s
= 64.74 x 32
= 2071.68 g = 2.072 kg
instructions for #4-5, balance each equation after substituting symbols and formulas for words, remembering to include abbreviations for the physical state.
For subscripts, just make sure the number is in the right location in the compound formula.
4. Iodine crystals react with chlorine gas to form solid iodine trichloride.
5. Solid sodium bicarbonate reacts with hydrochloric acid [HCl (aq)] to produce aqueous sodium chloride, water, and carbon dioxide gas.
Answer:
Ok:
Explanation:
4.
[tex]I_2_{(s)} + 3Cl_2_{(g)} => 2ICl_3{(s)}[/tex]
5.
[tex]NaHCO_3_{(s)} + HCl_{(aq)} => NaCl_{(aq)} + H_2O_{(l)} + CO_2_{(g)[/tex]
