Fireworks need an oxidizer, fuel, and a chemical mixture to produce the colour in the sky. Therefore, option (A) is correct.
How do colours come from firecrackers?The chemicals which are used in crackers are the main reason for the colours in the sky. The colours in the fireworks come from different compounds which are the binder and the colourant. The colourant chemicals provide the colours in the firework while the binder is the agent that binds the fuel and is responsible to burn up the colourant in the firework.
The colourants in the firecrackers can be generated with the use of various metallic salts. These salts can be defined as iconic compounds which possess an anion or an acid and a cation or a base. The metal salts are responsible for generating intense colours when they are burned.
For example, if use calcium salts in the firework will produce an orange colour, and copper salts will produce a bright blue colour.
Learn more about firecrackers, here:
https://brainly.com/question/25875131
#SPJ2
under which conditions do you expect helium gas to deviate most from ideal behavior?
Answer:
Explanation:
[2-0] NC Special Operation
[2] Supervisor
[2-1] Emergency Response
[2-2] Juggernaut
[2-3] Commander
[2-4] Division Director
What is infrared energy? simplify it
Answer:
It is a type of radiant energy that's invisible to human eyes but that we can feel as heat.
Please help This is for my chemistry class and I need to get it done but I’m lost and need answers
Answer:
chlorine is a non metal.
sodium is a alkali metal.
helium is a noble gas.
nickel is a transition metal
the distance between two successive peaks is called
Valence electrons are electrons in the ? of an atom.
Answer:
Valence electrons are the outermost of electrons.
Explanation:
valence electrons are the outermost electrons of an atom located in the shell/ orbit
Which of the following would make a solution
A. Sand in water
B. Oil in water
C. lee in water
O D. Sugar in water
When a gas is collected over water, the partial pressure of water must be subtracted from the total pressure. If the total pressure was 761 mmHg and the pressure for water is 17.2 torr, what is the pressure due to the gas collected
Answer is: the partial pressure of the hydrogen 500 mmHg.
p(total) = 523.8 mmHg.
p(water) = 23.8 mmHg.
p(total) = m(water) + p(hydrogen).
p(hydrogen) = p(total) - p(water)..
p(hydrogen) = 523.8 mmHg - 23.8 mmHg.
p(hydrogen) = 500 mmHg.
mmHg or millimeter of mercury is a manometric unit of pressure.
A 2.37 g sample of a substance suspected of being pure gold is warmed to 71.8 ∘C and submerged into 15.9 g of water initially at 24.3 ∘C. The final temperature of the mixture is 27.0 ∘C.
Answer:
specific heat capacity of the unknown is 629.66 J/kg C
Explanation:
As we know that gold is heated to 72.3 degree C and mixed with water at 24.8 degree C
Now the final temperature of the mixture is 26 degree C
here we can say that heat given by the gold = heat absorbed by the water
So we will have
Q_{in} = Q_{out}Q
in
=Q
out
2.62 s (72.3 - 24.8) = 15.6 (4186) (26 - 24.8)2.62s(72.3−24.8)=15.6(4186)(26−24.8)
so we will have
s = 629.66 J/kg Cs=629.66J/kgC
so specific heat capacity of the unknown is 629.66 J/kg C
The reactants A and B react completely in a sealed container to form a product. What is the mass of the product of the reaction between 3.0 grams of reactant A and 5.7 grams of reactant B?
Answer:
I'm pretty sure it is 8.7
Explanation:
and btw you are fineeee
Match the vocabulary word to its definition.
neutron
the central part of the atom containing
protons and neutrons
proton
a negatively charged particle that orbits
the nucleus of an atom
nucleus
a neutral particle located in the nucleus
of an atom
electron cloud
a positively charged particle located in
the nucleus of an atom
electron
the area of the atom surrounding the
nucleus where electrons can be found
Intro
Done
Answer:
neutron --> a neutral particle located in the nucleus of an atomproton --> a positively charged particle located in the nucleus of an atomnucleus --> the central part of the atom containing protons and neutronselectron cloud --> the area of the atom surrounding the nucleus where electrons can be foundelectron --> a negatively charged particle that orbits the nucleus of an atomWhat is the role of cellular respiration in organisms?
to provide energy for photosynthesis
to provide energy for breaking apart fuel molecules
to provide energy for making oxygen
to provide energy for cell activity
Answer:
C. sorry if I'm wrong ...................
what is the name of the high-energy compound that cells use to fuel chemical reactions?
Answer: Adenosine triphosphate, or ATP, is the primary carrier of energy in cells. The water-mediated reaction known as hydrolysis releases energy from the chemical bonds in ATP to fuel cellular processes.
Explanation:
Please help me, I'm stuck and I don't know how to do it.
How many atoms are there in 7.02 g Si ?
Answer:
1.51e23 atoms
Explanation:
First, using the molar mass of Si (28.1 g/mol), determine the # of moles of Si we have. Then use Avogadro's number (6.022e23 atoms = 1 mol) to convert the # of moles to the # of Si atoms.
(7.02 g Si)([tex]\frac{1 mol}{28.1 g}[/tex]) = 0.250 mol Si
(0.250 mol Si)([tex]\frac{6.022*10^{23} atoms }{1 mol}[/tex]) = 1.51e23 atoms
The atomic mass of Silicon (Si) is 28.09 g/mol. The no. of atoms present in 7.02 g of Si is 1.46 × 10²³.
What is a mole?Any substance containing 6.022 × 10²³ atoms is called one mole of that substance. The no.of moles can be calculated by dividing the given weight by the atomic mass of the substance.
Atomic mass of Si = 28.09 g/mol
Given mass = 7.02 g.
No.of moles = 7.02 g/ 28.09 g/mol
= 0.24 moles
One mole contains 6.02 × 10²³ atoms. Thus 0.24 mole of Si contains 6.02 × 10²³ × 0.24 = 1.46 × 10²³ atoms.
Hence, no.of atoms present in 7.02 g of Si is 1.46 × 10²³ .
To learn more about no. of moles, refer the link below:
https://brainly.com/question/26416088
#SPJ2
what is the total number of valence electrons in ethyl acetate?
Answer: There are 36 valence electrons.
Explanation:
Two or more than two atoms with different physical or chemical properties can not combine together to form an element. Therefore, the valence electrons of C₄H₈O₂ is 32.
What is element?Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.
A valence electron is a negatively charged particle, located in the outermost shell of an atom, that can be transferred to or shared with another atom. To calculate total valence electrons in C₄H₈O₂, we need to add the individual valence electrons of each element.
Valence electrons of C₄H₈O₂= {valence electrons of C×4}+{valence electrons of H×4}+{valence electrons of O×2}
Valence electrons of C₄H₈O₂= {4×4}+{1×4}+{6×2}
Valence electrons of C₄H₈O₂=32
Therefore, the valence electrons of C₄H₈O₂ is 32.
To know more about element, here:
brainly.com/question/8460633
#SPJ5
When pyridine is treated with a mixture of nitric and sulfuric acids, the major product is:.
Answer: 3-nitropyridine
Explanation:
What is the mass of oxygen atoms in 0. 380 mol fe(co)5?.
Answer:39+30
Explanation:
When a substance changes from a solid to a liquid, is a new substance made?
Answer:
no
Explanation:
it means melting or fusion so yhe answer is no
A substance changes from a solid to a liquid no its is not the formation of new substance. It is the change of state of the matter.
What are the states of matter?The states of matter can be defined as one of the several configurations in which matter can exist.
There are basically three states of matter.
Solid - It is defined as hard, distinct in volume and shape. Atoms and molecules are joined together to form solids.Liquid - It is defined as defined volume with the ability to flow and change shape. Atoms and molecules are only weakly bound together in liquids.Gases - It is defined as no clear shape or volume.Thus, a substance changes from a solid to a liquid no its is not the formation of new substance. It is the change of state of the matter.
To learn more about states of matter, refer to the link below:
https://brainly.com/question/9402776
#SPJ2
fork is a metal or nonmetal ?
put these atoms in order of increasing radius: Na, Mg,Cl, P
Answer:
Cl < P < Mg < Na
Explanation:
Cl must have the smallest radius because it is located to the right of the remaining elements on the same row. P must have the second smallest radius because it is located to the right of the remaining elements on the same row. Mg must have the Third smallest radius because it is located to the right of Na on the same row. Therefore, Na has the Largest radius.
I hope it helps.
7. What is the name of the compound AICO3?
Answer:
Calcium carbonate
Explanation:
Hope this helps :)
Have an amazing day <3
Potential energy depends on
Question 2 options:
Length and color
Position or shape
Density and volume
Speed and velocity
Answer:
Explanation:
Speed and velocity I think
help me please the subject is siecnce
Answer:
okay your question in science
Which factor most often affects wind and weather patterns on Earth?
Answer:
i think its solar radiation
Which of the following shows a valid combustion reaction?
2Al + 2O2 → 2AlO + O2
C2H4 + 3O2 → 2CO2 + 2H2O
2CH4 + O2 → 2CO + 4H2
Ca + O2 → CaOH
Answer: C2H4 + 3O2 → 2CO2 + 2H2O
Explanation:
2Al + 2O2 → 2AlO + O2 Not Balanced Properly: 2Al + O2 = 2AlO
C2H4 + 3O2 → 2CO2 + 2H2O Looks Good
2CH4 + O2 → 2CO + 4H2 Not Correct: CO should be CO2
Ca + O2 → CaOH Not Balanced and No source for the H
Answer:
2H4+3O2 →2CO2+2H2
Explanation:
How do erosions affect land forms?
Erosion is the only cause of land form changes.
Land forms can be created by erosion.
Erosion can prevent land forms from being built.
Land forms can only be created through erosions.
Answer:
the anwser is landforms can be created by erosion
Explanation:
what type of intermolecular force causes the dissolution of nacl in water?
Answer:
ion-dipole forces
Explanation:
positive sodium ion will be attracted to the slightly negative oxygen atoms in the water molecule, while the negative chloride ion is attracted to the slightly positive hydrogen atoms.
Is the gin world scary?
Answer:
Gin= Machine that picks cotton
Explanation:
This Machine was used in the early 1940s to help pick cotton to make things.
How do you produce a buffer.
Answer:
Buffers can be made from weak acids or base and their salts.
Explanation:
hope this helps!
(if not tell me in the comments and i will try to help you!)
Answer:
Buffers are made by adding a strong acid or base to a weak acid or base.
Explanation:
moles
Calculate the number of moles of 3.00 g of boron tribromide,
Chemical properties of water and oxygen for class 8
