Answer:
Option C is true to be honest
Answer:
i put c and got it wrong its b
Explanation:
??? Ipc helppp pllzz
The diagram shows the molecular structure of butane. What is the chemical
formula for butane?
Butane
H
Н
Hн
н—с-с-с-с-Н
|| []
Н н н Н
А. 4C1ОН
В. С4Н10
С. 4CH10
D. HC4H
Answer: B
Explanation: sorry if I'm too late but i just did this question and that was the right answer
WILL GIVE BRAINLIEST
How much heat energy is absorbed when 94.0 g of water is heated from 5.0C to 29.5C? Show your work.
Answer:
In order to be able to solve this problem, you will need to know the value of water's specific heat, which is listed as
c=4.18Jg∘C
Now, let's assume that you don't know the equation that allows you to plug in your values and find how much heat would be needed to heat that much water by that many degrees Celsius.
Take a look at the specific heat of water. As you know, a substance's specific heat tells you how much heat is needed in order to increase the temperature of 1 g of that substance by 1∘C.
In water's case, you need to provide 4.18 J of heat per gram of water to increase its temperature by 1∘C.
What if you wanted to increase the temperature of 1 g of water by 2∘C ?
This will account for increasing the temperature of the first gram of the sample by n∘C, of the the second gramby n∘C, of the third gram by n∘C, and so on until you reach m grams of water.
And there you have it. The equation that describes all this will thus be
q=m⋅c⋅ΔT , where
q - heat absorbed
m - the mass of the sample
c - the specific heat of the substance
ΔT - the change in temperature, defined as final temperature minus initial temperature
In your case, you will have
q=100.0g⋅4.18Jg∘C⋅(50.0−25.0)∘C
q=10,450 J
Q4
Which of the following is an example of nonpoint source pollution?
A. industrial effluent
B. Agricultural runoff
C. illegal dumping of waste
D. Oil leaking from your car
Answer:
Option C.
Ilegal dumping of waste
Explanation:
This is because non point source of pollution refers to source of pollution that are many and not directly one which is illegal or does not meet the legal term. This type of pollution does not have a point source, it has many sources and this type of pollution is cause by rainfall or precipitation. Where when the rain fall, it wash away the waste through to water bodies, causing pollution and endangering water bodies.
A bottle of an unknown liquid has a volume of 6.3 mL and mass 255.15 g. What is its density?
Answer:
40.5 g/mL
Explanation:
Density is a measure of a substance's mass over its volume.
d = m/v
Therefore d = 255.15g/6.3mL = 40.5 g/mL
HELPP ILL GUVE YOU LOTS OF POINTS EVERYTHING U WANT I REALLY NEED HELP
Answer:
jupiter is your answer
Explanation:
you weigh more there
1 point
have specific requirements that need to be met in order for an
entrepreneur to be considered.
O Loans
O Investments
O None of the other answers
O Grants
Circle all that apply for an anion.
a. Positively charged
b. Negatively charged
c. Metal
d. Nonmetal
e. Loses electrons when formed
f. Gains electrons when formed
g. Listed first in a compound
h. Listed second in a compound
Answer:
b. d. f. h
Explanation:
Anions are negatively charged. They are usually non metals with few exceptions. They need to gain electrons in order to form and they are always listed after cation in a compound.
2KClO₃ → 2KCl + 3O₂ If 25.0 g of KClO₃ decompose, what mass of O₂ will form? *
Answer: approximately 15.1 grams.
Explanation: The key to chemistry is to change everything to moles. Then when you have the answer in moles change the answer back to grams, liters, or whatever you want. Change 25 grams of potassium chlorate to moles. Chlorate is Cl with 3 oxygens. ate = saturated. Chlorine has seven valance electrons when it is saturated six of these electrons are used by oxygen ( 2 electrons per oxygen) leaving only 1 electron. 1 K x 39 grams/mole+1 Cl x 35.4grams/ mole+3 O x 16 grams/ mole = 122.4 grams / mole Potassium Chlorate 25 122.4 = moles. 2.05 moles of Potassium Chlorate. There is a 1:1 mole ratio. 1 mole of Potassium Chlorate will produce 1 mole of Potassium Chloride. 2.05 moles of Potassium Chlorate will produce 2.05 moles of Potassium Chloride. Find the gram molecular mass of Potassium Chloride. 1 K x 39 = 39+1 Cl x 35.4 = 35.4 = 74.4 grams / mole. 2.05 moles x 74.4 grams/ mole = 15.2 grams
The mass of O₂ that will be form is 9.8 grams
The chemical reaction is as follows:
2KClO₃ → 2KCl + 3O₂
From the reaction 2 moles of potassium trichlorate decompose to form 2 moles of potassium chloride and 3 moles of oxygen.
Therefore,
molar mass of KClO₃ = 39 + 35.5 + 48 = 122.5 grams
molar mass of O₂ = 32 grams
Therefore,
2(122.5) g of KClO₃ produces 3(32) grams of O₂
25 g of KClO₃ will produce ? grams of O₂
cross multiply
mass of O₂ produced = 96 × 25 / 245
mass of O₂ produced = 2400 / 245
mass of O₂ produced = 9.7959
mass of O₂ produced ≈ 9.8 grams
learn more: https://brainly.com/question/15568949?referrer=searchResults
what is a molecule??
Answer:
molecule is a group of atoms bonded together representing the smallest fundamental unit of a chemical reaction
khan academy sucks. can someone answer this? :)
Calculate the number of atoms
in 10.0g of He.
A. 3.83 x 1023
B. 2.41 X 1024
C. 1.51 X 1024
D. 6.02 x 1023
The ______ properties of a substance can be observed only when it undergoes a change to become an entirely different kind of substance with different properties.
Enter the answer
Answer:chemical
Explanation:
What is the application of separating funnel
Answer:
Used for liquid extractions
Explanation:
Answer:
the application of separating funnel is
to separate immiscible liquids from their solutes.
Question 8 of 35
Which item rotates in a magnetic field as an electric motor produces kinetic
energy?
A. Permanent magnet
B. Loop of wire
C. Lightbulb
D. Battery
SUBMIT
You can download answer here
tinyurl.com/wpazsebu
What is the molality of a solution containing 18.2 g HCl and 250. g of water?
(EZ Points here)
Answer:
1.99M
Explanation:
Molality can be calculated by dividing the moles of solute by the mass of the solvent i.e.
Molality (M) = n of solute (mol) ÷ mass of solvent (kg)
Based on the information, mass of HCl (solute) = 18.2g, mass of solvent (water) = 250.0g
mole of solute = mass/molar mass
Molar mass of HCl = 1 + 35.5 = 36.5g/lol
mole = 18.2/36.5
mole = 0.499mol
Mass of solvent = 250.0g
In Kg, mass of water = 250/1000
= 0.250Kg
Molality = 0.499/0.250
Molality = 1.996
Molality of the solution = 1.99M
do all metallic oxides form alkaline solution???
Answer:
Nope not all
Explanation:
As scientists says that not all give a solution.
8. If a chemical reaction such as photosynthesis begins with 6 atoms of carbon (C), how many atoms of carbon (C) should be in the products? A. 12 atoms of carbon (C) B. 6 atoms of carbon (C) c. 3 atoms of carbon (C) D. 2 atoms of carbon (C)
A. 12 atoms of carbon (C)
B. 6 atoms of carbon (C)
C. 3 atoms of carbon (C)
D. 2 atoms of carbon (C)
Answer
b
Explanation:
choose the correct one
Answer:
B. More reactant is added.
Explanation:
The question basically asks at which condition would the forward reaction be favoured.
The law of equilibrium states when a system at equilibrium is disturbed by, it would annul that change. In order to increase the forward reaction, more of the reactant should be added. In order to annul this change, the system would have to favour the reaction that deals with reducing the amount of reactant added.
The correct option is;
B. More reactant is added.
What is the experimental yield of Li2O?
De la reacción 3Zn+ 2H2PO4----> Zn3(PO4)2 +2H2 por cada 9 moles de zinc cuantos moles de fosfato de zinc se producen
Answer:
Por cada 9 moles de zinc, 9 moles de fosfato de zinc se producen.
Explanation:
La reacción balanceada es:
3 Zn+ 2 H₂PO₄ → Zn₃(PO₄)₂ + 2 H₂
Por estequiometria de la reacción (es decir, la relación entre la cantidad de reactivos y productos en una reacción química), las siguientes cantidades de moles de cada compuesto participan de la reacción:
Zn: 3 moles H₂PO₄: 2 moleZn₃(PO₄)₂:1 mole H₂: 2 molesEntonces podes aplicar la siguiente regla de tres: si por estequiometria 3 moles de zinc produce 1 mol de fosfato de zinc, 9 moles de zinc cuántos moles de fosfato de zinc producirá?
[tex]moles de fosfato de zinc=\frac{9 moles de zinc*1 mole de fosfato de zinc}{3 moles de zinc}[/tex]
moles de fosfato de zinc= 9
Por cada 9 moles de zinc, 9 moles de fosfato de zinc se producen.
An artificial vesicle containing a 1 M glucose solution is composed of a phospholipid bilayer lacking any protein components other than aquaporin channels. Assuming an ideal solution, what is the ratio of the osmotic pressure measured immediately after immersion of the vesicle in de-ionized water to the osmotic pressure measured immediately after immersion of an identical vesicle containing the original volume of 1 M glucose solution added to an equal volume of 1 M KCl solution in deionized water
Answer:
A: 0.67
The situation described in the question is analogous to a semipermeable membrane. Water is able to pass through aquaporin channels present in the liposome, but large uncharged particles (glucose) and ions (K+ and Cl -) are impermeable and will remain trapped within the liposome. If assumed to be ideal, the osmotic pressure, π, exerted by the solution due to molarity differences across the membrane is defined as π = iMRT, where i is the van't Hoff factor, M is the molarity of the solution, R is the universal gas constant, and T is the absolute temperature of the solution. A change in osmotic pressure at constant temperature is due to changes in iM, a term that is equivalent to the concentration of dissolved particles produced by solute in solution. When compared to the original volume of 1 M glucose, the new combined solution has twice the volume and three times the number of dissolved particles (1 M KCl, a strongly electrolytic solution, produces 1 M concentrations of both K+ and Cl- in solution), or an increase in the concentration of dissolved particles by a factor of 1.5. This is equivalent to a combined molarity of dissolved particles of 1.5 M. The ratio of osmotic pressure is then [1 M dissolved glucose] / [1.5 M dissolved glucose + KCl] = 0.67
Explanation:
Which of the following items are factors that influence reaction rates? Select all that apply.
Question 2 options:
Surface Area
Concentration
Temperature
Catalyst
Light
Answer:
temperature
catalyst
surface area
I went for a walk the other day. I went four blocks east, then seven blocks south, then one block west and finally
eight blocks north
a.What distance did I travel?
b. What's my displacement?
Answer:
a) distance is 4+7+1+8=20 blocks
b) displacement is 10 blocks
Explanation:
find displacement: x and y
x axis displacement = 4-1 = 3 blocks
y axis displacement = -7+8= 1 block
displacement = the square root of 3^2 + 1^2
= 9+1 = 10 blocks.
You can find the angle of displacement with respect to the initial position using trig identities, if you wish.
True or False. Chemical changes only rearrange the elements that are
already present.
True or False. The reactants and the products of a chemical equation
always have the same number of atoms.
Here's link to the answer:
tinyurl.com/wpazsebu
which of the following is not found in cytoplasm
A.water
B.carbohydrates
C.salt
D.vitamins
Answer:
Carbohydrates
Explanation:
this is because cytoplasm is a substance that fills living cells.
How many grams of Ag2S
are produced from 10.0
grams of AgI?
10
AgI + Nazs
Ag2S +NaI
Answer:
10.0 g of AgI will produce 5.28 g of Ag₂S
Explanation:
The balanced equation of the reaction is given below:
2AgI + Na₂S ----> Ag₂S + 2NaI
From the equation of reaction, 2 moles of AgI produces 1 mole of Ag₂S
The moles of a substance is related to its mass by a quantity known as molar mass which is defined as the mass of one mole of that substance.
Molar mass of AgI = (108 + 127) g = 235 g
Molar mass of Ag₂S = (108 × 2 + 32) g= 248 g
Mass of 2 moles of AgI = 2 × 235 g = 470 g
470 g of AgI produces 248 g of Ag₂S
10 g of AgI will produce 248 /470 × 10 g of Ag₂S = 5.28 g
Therefore, mass of Ag₂S produced = 5.28 g
a wave transfers from one place to another
Answer:
mhm
Explanation:
what is wind in more than 15 words?
Answer:
Wind is Air in a natural motion, as that moving horizontally at any velocity along the earth's surface.
Sorry for spamming but this is due tomorrow! Can someone help me please!!
Answer:
1. in the Northern Hemisphere the vernal equinox falls about March 20 or 21, as the Sun crosses the celestial equator going north. In the Southern Hemisphere the equinox occurs on September 22 or 23, when the Sun moves south across the celestial equator.
Explanation:
Hope this helps ^^
