Answer:
its turgor pressure decreases
Explanation: This is also important because this function regulates water loss within the plant. Lower turgor pressure can mean that the cell has a low water concentration and closing the stomata would help to preserve water. :-)
When a leaf loses much-needed water, its turgor pressure would decrease. Hence Option A is Correct
What is Turgor pressure ?Turgor Pressure is created in the cells of a leaf when there is enough water. The water stretches the cell membrane outward, creating a kind of pressure.
When the cells lose water, the cell membrane shrinks inward and loses the supporting pressure.
Thus, the turgor pressure created by the presence of water is lost by the absence of water.
The absence of water also affects the rate of photosynthesis and transpiration negatively and not positively. A leaf losing water has no bearing on the atmospheric pressure.
learn More about turgor pressure here:
brainly.com/question/2727035
#SPJ6
Compared to ionic compounds, molecular compounds generally have
A. good conductivity.
B. greater densities.
C. more chemical bonds.
D. a low boiling point.
Compared to ionic compounds, molecular compounds generally have a low boiling point and the correct option is option D.
What are Molecular compounds?
Molecular compounds are held together by covalent bonds. They are also called covalent compounds.
Covalent bonds are responsible for many of the properties of covalent compounds. Covalent compounds have relatively low boiling points, cannot conduct electricity, and may not dissolve in water.
Unlike ionic compounds, covalent compounds do not have freely moving electrons, so they cannot conduct electricity.
The individual molecules of covalent compounds are more easily separated than the ions in a crystal, so most covalent compounds have relatively low boiling points.
Therefore, compared to ionic compounds, molecular compounds generally have a low boiling point and the correct option is option D.
Learn more about Molecular compounds, here:
https://brainly.com/question/23088724
#SPJ3
Fill in the blanks using terms from this unit.
Even though plants are rooted in the ground, they still move, exert
Blank Options
choose your answer...
and do
Blank Options
choose your answer...
.
Plant cells have very strong cell walls that allow
Blank Options
choose your answer...
to build up inside of the cell as water is absorbed. This pressure is called
Blank Options
choose your answer...
.
When turgor pressure is high enough in a cell, the cell walls become
Blank Options
choose your answer...
and As a result, the cell becomes rigid and the plant is able to stand
Blank Options
choose your answer...
and straight. When a plant does not get enough water, the turgor pressure inside of the cells
Blank Options
choose your answer...
.
A decrease in pushing against the cell wall causes the cells to lose their
Blank Options
choose your answer...
and This causes the plant to begin to droop, or
Blank Options
choose your answer...
.
When the wilted plant gets enough water, the cells will become rigid again, and the plant will stand firm and straight once again.
Answer:
Even though plants are rooted in the ground, they still move, exert force, and do work.
Plant cells have very strong cell walls that allow pressure to build up inside of the cell as water is absorbed. This pressure is called turgor.
When turgor pressure is high enough in a cell, the cell walls become firm and as a result, the cell becomes rigid and the plant is able to stand tall and straight.
When a plant does not get enough water, the turgor pressure inside of the cells decreases. A decrease in pressure pushing against the cell wall causes the cells to lose their shape and shrink. This causes the plant to begin to droop or wilt.
When the wilted plant gets enough water, the cells will become rigid again, and the plant will stand firm and straight once again.
Explanation:
what is an extensive prperty of matter
Answer:
Volume
Mass
Size
Weight
Length
Explanation:
Extensive properties do depend on the amount of matter that is present. An extensive property is considered additive for subsystems. Examples of extensive properties include:
Volume
Mass
Size
Weight
Length
Which of the following is a characteristic of covalent compounds?
What are two reasons that someone would want to become a scientist?
1 point
Your answer
Magnesium is a metal that is commonly used in products that need to be lightweight. Suppose a 2.00-kg piece of magnesium has 8160 J of energy added to it. Its temperature increases 4k. What is the specific heat of magnesium. Show your work
Answer:
The specific heat of magnesium is 1.02 J/g.K
Explanation:
To calculate the energy involved in the heating of the metal (magnesium), we use the following expression:
energy = mass x Cp x ΔT
We have the following data:
mass = 2.00 kg x 1000 g/1.00 kg = 2000 g
energy = 8160 J
ΔT = 4 K
Thus, we can calculate the specific heat of magnesium (Cp) in J/g.K as follows:
⇒ Cp = energy/(mass x ΔT) = 8160 J/(2000 g x 4K) = 1.02 J/g.K
HELPPPPPPPPPPPPPPPPPPP
Answer:
not sure about the first one, but i know SDS provides information about the last 3.
Explanation:
which of these is a characteristic
of index fossils
Answer: A index fossil is any animal or plant preserved in the rock record of the earth that is characteristic of a particular span of geologic time or environment. A useful index fossil must be distinctive or easily recognizable, abundant, and have a wide geographic distribution and a short range through time.
Explanation:
What energy is formed when you put your hands together and rub them up and down rapidly
Answer:
When you rub your hands together thats mechanical energy. Once you hands warm up its heat energy.
two negative charges are placed near each other. what happens between the charges
Answer:
repulsion
Explanation:
Answer:
Explanation:
In contrast to the attractive force between two objects with opposite charges, two objects that are of like charge will repel each other. ... Similarly, a negatively charged object will exert a repulsive force upon a second negatively charged object. Objects with like charge repel each other.
what is formula for Bromine?
Br2
I looked it up and it said that Bromine's formula is Br2
Answer:Br2
Explanation:
Condensation point and freezing point of argon in KELVIN.
Answer:
Condensation: 423.3 K
Freezing: 83.96 K
(this is all i could figure out :) hope it helps)
Can someone define these for me
Answer:
These are all in order....
Explanation:
- closed system usually absorbs thermal energy from its surroundings, which is heat transfer into the system
- a solute is a substance dissolved in another substance, known as a solvent
- A solvent is a substance that dissolves a solute, resulting in a solution. A solvent is usually a liquid but can also be a solid, a gas, or a supercritical fluid
- a liquid mixture in which the minor component (the solute) is uniformly distributed within the major component (the solvent)
- a nuclear reaction in which a heavy nucleus splits spontaneously or on impact with another particle, with the release of energy
- a nuclear reaction in which atomic nuclei of low atomic number fuse to form a heavier nucleus with the release of energy.
- Half-life is the time required for a quantity to reduce to half of its initial value
- the determination of the age or date of organic matter from the relative proportions of the carbon isotopes carbon-12 and carbon-14 that it contains. The ratio between them changes as radioactive carbon-14 decays and is not replaced by exchange with the atmosphere.
- any system closed to all transfers of matter and energy, the mass of the system must remain constant over time, as the system's mass cannot change, so quantity can neither be added nor be removed
Does anyone know how to determine if a reaction is a redox or not?
2Ca+O2→2CaO2 is the reaction. I've already made it a balanced equation, I just need to determine if its a redox or not.
Thank you!
The reaction is included in a redox reaction
Further explanation:
Given
Reaction
2 Ca + O₂ → 2 CaO
Required
a redox reaction
Solution
Redox reactions are reactions where there is a change in oxidation number
Oxidation is an increase/increase in oxidation number, while reduction is a decrease/decrease in oxidation number.
Reducing agents are substances that experience oxidation and oxidizing agent are substances that experience reduction
in the above reaction is included in a redox reaction because there is a change in oxidation number
Ca⇒Ca²⁺+ 2e⁻(for balanced equation : 2Ca⇒2Ca²⁺+4e⁻)
Oxidation ( 0 to +2)
O₂+2e⁻⇒O²⁻(for balanced equation : O₂+4e⁻⇒2O²⁻)
Reduction (0 to -2)
Which Ion has the same electron configuration as an Ar atom
1. Cl -
2. F -
3. Li+
4. Na +
Which statement about cellular respiration in plants and animals is true?
Both plants and animals need water to start cellular respiration.
Both plants and animals release energy from glucose in cellular respiration.
Both plants and animals take in carbon dioxide to break down glucose in cellular respiration.
Both plants and animals need chlorophyll to make glucose before using it in cellular respiration.
Answer:
Both plants and animals release energy from glucose in cellular respiration.
which type of energy would most likely create the worst environment disaster from an accident or spill
Answer:
the dessert
Explanation:
because it is dry and very few anmals live there
how many dots would a dot diagram for selenium, one of the group 16 elements, have?
Answer:
Because selenium is in the 16th column on the periodic chart, it has 6 valence electrons. Thus, the Lewis structure (or electron dot structure) for selenium has 6 dots around it.
It will look similar to this without the underscores:
__.
. Se:
_. .
Explanation:
The Lewis structure (or electron dot structure) for selenium has 6 dots around it.
What is an electron dot structure?Electron dot diagrams are diagrams in which the valence electrons of an atom are shown as dots distributed around the element's symbol.
Selenium is in the 16th column on the periodic chart, it has 6 valence electrons. Thus, the Lewis structure (or electron dot structure) for selenium has 6 dots around it.
Learn more about electron dot structure here:
https://brainly.com/question/7242210
#SPJ2
balancing equations help!!
Someone please help will mark as brainliest
1. solute is the substance that is being dissolve,while solvent is dissolving medium
2.saturated is solution that contain maximum amount of solut that capable of being dissolve and supersaturated is solution that contain less amount or medium of solut that capable being dissolve : example vinger
3. is a number placed in front of a chemical symbol or formula. It shows how many atoms or molecules of the substance are involved in the reaction. For example, two molecules of hydrogen would be written as 2 H2, and two molecules of water would be written 2 H2O . yes it's can be change only in caseWhen you balance an equation you can only change the coefficients
Show your work with good use of units, rounding, and significant figures. [Hint: it is good practice to show the value of your answer before you round off to the final answer with the correct significant figures!]
(8 points) How much heat is required to convert 10.00 g of ice at –20.00°C to water at 25°C. The specific heat of ice is 2.09J/g°C; the specific heat of water is 4.182 J/g°C; the heat of fusion is 333.0 J/g.
Group of answer choices
Heat required : 4.8 kJ
Further explanationThe heat to change the phase can be formulated :
Q = mLf (melting/freezing)
Q = mLv (vaporization/condensation)
Lf=latent heat of fusion
Lv=latent heat of vaporization
The heat needed to raise the temperature
Q = m . c . Δt
1. heat to raise temperature from -20 °C to 0 °C
[tex]\tt Q=10\times 2.09\times (0-(-20)=418~J[/tex]
2. phase change(ice to water)
[tex]\tt Q=10\times 333=3330~J[/tex]
3. heat to raise temperature from 0 °C to 25 °C
[tex]\tt Q=10\times 4.18\times (25-0)=1045~J[/tex]
[tex]\tt Q~tot=418+3330+1045=4793~J\rightarrow rounding~and~2~sig~figs=4.8~kJ[/tex]
A hot metal plate at 150°C has been placed in air at room temperature. Which event would most likely take place over
the next few minutes?
O Molecules in both the metal and the surrounding air will start moving at lower speeds.
O Molecules in both the metal and the surrounding air will start moving at higher speeds.
O The air molecules that are surrounding the metal will slow down, and the molecules in the metal will speed up.
O The air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down.
Answer:
It would be the third answer.
Explanation:
This is because over the next few minutes, the heat would radiate away from the atoms in the metal plate and the atoms around the plate would absorb this radiation.
Help please When you are measuring your pulse (heart beats per minute) what system are you monitoring?
A. Digestive
B. Respiratory
C. Circulatory
D. Integumentary (skin)
WHAT DOES THE MASS OF AN OBJECT MEASURE HURRYYYYYYYYYYYYYYYYYYYYY
Answer:
object's inertial property
Explanation:
The mass of an object is a measure of the object's inertial property, or the amount of matter it contains. The weight of an object is a measure of the force exerted on the object by gravity, or the force needed to support it. The pull of gravity on the earth gives an object a downward acceleration of about 9.8 m/s2.
Answer:
The mass of the object internal property, or the amount of matter it contains
Explanation:
Hope this helps! Happy Holidays!
FOR 35 POINTS & A BRAINIST*
1.) For an atom of sulfur, there are
A.) two electron shells with 6 valence electrons
B.) three electron shells with 6 valence electrons
C.) four electron shells with 6 valence electrons
D.) five electron shells with 6 valence electrons
2.) Which atom has four electron shells with 7 valence electrons?
A.) F
B.) CI
C.) Br
D.) I
3.) Which atom has three electron shells with 8 electrons in its outermost orbit?
A.) He
B.) Ne
C.) Ar
D.) Kr
4.) Which method should be used to draw electrons that are involved in a collision during a chemical reaction?
A.) Bohr's model
B.) Lewis dot model
C.) Addition model
D.) Subtraction model
What is the advantage of using Microsoft Excel to create a graph, as opposed to pen and paper?
Chemistry class I NEED HELP FAST
Answer:
the advantage of using Microsoft Excel to create a graph, as opposed to pen and paper is it will help you get the right answer
Explanation:
Help me please:(:(:( with my bellwork
for brainiest
Answer:
Elements are made of only one kind of atom
Compounds are made of 2 or more elements chemically bonded together
Explanation:
Its right there????
True or false
Equal forces acting on one object in opposite directions are called balanced forces
Answer:
True
Explanation:
Forces, equal in magnitude and opposite in direction, and cancel each other out are called Balanced Forces.
Balanced Forces DO NOT cause any change in the velocity of the object, but the Object may correspond to a change in shape or size.
Example :
Blasting a balloon by compressing it tightly with both hands, roughly with an equal force, is a practical example of Balanced Forces. In this case, the balloon before the burst stays at a state of rest and same after the burst. But the burst or the compression, causes a change in the shape of the balloon.
Provide background information about different types of chemical reactions.
Synthesis Reactions
Decomposition Reactions
Single Replacement Reaction
Double Replacement Reaction
Combustion
Then explain, in a general sense, how you will determine which of the above types of reactions are occurring in your experiments.
Answer:
.
Explanation:
-Synthesis reactions are reactions that appear when two distinct atoms or molecules engage to structure a specific molecule or compound. Most of the time, when a synthesis response occurs, electricity is launched and the response is exothermic. However, an endothermic consequence is additionally possible.
-A decomposition response starts offevolved from a single substance and produces extra than one substance; that is, it decomposes. One substance as a reactant and greater than one substance as the merchandise is the key attribute of a decomposition reaction. For example, in the decomposition of sodium hydrogen carbonate (also recognized as sodium bicarbonate)
-A single-replacement response (sometimes referred to as a single-displacement reaction) is a chemical response in which one aspect is substituted for every other factor in a compound, producing a new aspect and a new compound as merchandise
-A double-replacement response (sometimes referred to as a double-displacement reaction) takes place when components of two ionic compounds are exchanged, making two new compounds. A attribute of a double-replacement equation is that there are two compounds as reactants and two distinctive compounds as product
-A combustion response happens when a reactant combines with oxygen, many instances from the atmosphere, to produce oxides of all different factors as products; any nitrogen in the reactant is transformed to elemental nitrogen, N2. Many reactants, referred to as fuels, incorporate normally carbon and hydrogen atoms, reacting with oxygen to produce CO2 and H2O
A chemical reaction may involve one or more reactants to yiled one or more products.
Types of reactionsBelow we are going to discuss the types of reaction under the following headings;
Synthesis reaction - This is a reaction in which two or more substances come together to yiled a single product.
Decomposition reaction - This involves the breakdown of a substance into new substances.
Single Replacement Reaction- This is a type of reaction in which an atoms replaces another in a compound.
Double Replacement Reaction - This is a reaction in which cations exchange anion partners in a reaction
Combustion - This is a reaction in which a substance is burnt in oxygen.
Learn more about reactions:https://brainly.com/question/17434463?
#SPJ2
What is the molar mass of B,(Croa)g?
a. 186 g/mol
b. 369 g/mol
C. 232 g/mol
d. 250 g/mol
