Answer:
3,1,4,2
Explanation:
Answer:C
Explanation:
Brandon hits a golf ball with an initial velocity of 30 m/s at an angle of 30 above the horizontal. How long is it in the air?
Given :
Brandon hits a golf ball with an initial velocity of 30 m/s at an angle of 30 above the horizontal.
To Find :
How long is it in the air.
Solution :
We know, the formula of time of flight is :
[tex]T = \dfrac{2usin\ \theta}{g}\\\\T = \dfrac{2\times 30\times sin\ 30^o}{9.8}\\\\T = 3.06\ seconds[/tex]
Therefore, the ball is in air for 3.06 seconds.
When will the Social Security fund dry up at its current level?
A.
2022
B.
2027
C.
2042
D.
2097
E.
2117
Answer:
C. 2042
Explanation:
trust me I know the answer
In 2042 the Social Security fund will dry up at its current level. The correct option is C.
The answer is not entirely clear, as projections can vary depending on various economic and demographic factors. However, based on the 2021 Social Security Trustees Report, the projected depletion date for the Social Security Trust Fund is 2034. This means that at the current rate of payouts and contributions, the Trust Fund will only be able to pay out about 78% of scheduled benefits after 2034.
Therefore, the closest option to the projected depletion date of the Social Security Trust Fund is C. 2042. However, it is important to note that this projection may change as economic and demographic factors change over time.
To learn about social security benefits click:
https://brainly.com/question/30746058
#SPJ7
A 300 kg piano needs to be moved to the other side of the room. The maximum static frictional force is equal to 90 N and the kinetic frictional force is equal to 70 N. Calculate the acceleration of the piano for an applied force of 100 N.
Answer:
a = 0.1 m/s²
Explanation:
If the maximum static frictional force is 90 N, this means that any applied force that will overcome this force, will cause the piano to slide, so kinetic frictional force applies.Under these conditions, the net force in the horizontal direction is just the difference between the applied force (which is larger that the static friction force) and the kinetic frictional force, as follows:[tex]F_{net} = F_{app} -F_{frk} = 100 N - 70 N = 30 N (1)[/tex]
By the same token, according Newton's 2nd Law, this force is just equal to the product of the mass of the piano, times the acceleration, as follows:[tex]F_{net} = m* a = 300 Kg * a = 30 N (2)[/tex]
Solving for a:[tex]a = \frac{F_{net}}{m} = \frac{30 N}{300kg} = 0.1 m/s2 (3)[/tex]
what is mean by combination reaction ?
[tex] \underline{\purple{\large \sf Combination \: reaction :-}} [/tex]
Those reaction in which two or more substances combine to form a one new substance are called Combination reaction
In this reaction, We can add :
Two or more elements can combine to form a compound.Two or more compounds can combine to from a one new compound.An element and a compound can combine to form a new compound.[tex] \underline{\green{\large \sf For\: example :}} [/tex]
[tex] \sf 2H_{2} + O_{2} \: \underrightarrow{Combination} \: 2H_{2}o[/tex]
In this, Hydrogen is an element and Oxygen is another element. Both are combined to form compound 'Hydrogen oxide'. Hydrogen oxide is commonly known as water.
Bob Beamon's 1968 Olympic long jump set a world record which remains unbroken to this day. This amazing jump resulted from an initial velocity of 9.5 m/s at an angle of 40 degrees from the horizontal.
1. Calculate the initial horizontal velocity (V_ix) to two significant figures:
2. Calculate the initial vertical velocity (V_iy) to two significant figures:
3. Calculate the time needed to reach the highest point of the jump (t_1/2) to two significant figures:
4. Calculate the total time (t_TOT) needed to complete the jump to two significant figures:
5. Calculate the maximum height (h) reached during the jump to two significant figures:
6. Calculate the range (total horizontal distance) of his jump to two significant figures:
Please answer today! Thanks!
Answer:
1.) 7.3 m/s 2.) 6.1 m/s
Explanation:
To calculate the initial horizontal velocity with just degrees and velocity alone is pretty simple. The formula is Velocity*cos(degrees)
eg 9.5*cos(40)
2. To calculate the initial vertical velocity with just degrees and velocity alone is pretty simple. The formula Velocity*sin(degrees)
eg 9.5*sin(40)
What is the relationship between kinetic and potential energy of a falling object
Answer:
See the explanation below.
Explanation:
According to the law of energy conservation. This can be transformed from potential energy to kinetic or vice versa.
For example, when you have a body at rest at a height with respect to the ground level, this body possesses potential energy with respect to the ground, but the moment that the body falls the potential energy decreases as it loses height with respect to the ground, but as the potential energy decreases, the kinetic energy increases, that is to say, the potential energy is transformed into kinetic energy as the body is falling.
As the energy relationship is maintained we can say that the potential and kinetic energies are equal.
[tex]E_{pot}=m*g*h\\E_{kin}=\frac{1}{2} *m*v^{2} \\E_{pot}=E_{kin}[/tex]
A tennis ball moves 16 meters northward, then 22 meters southward, then 12 meters northward, and finally 32 meters southward.
In an open circuit like the picture
A. the light bulb will produce light
B. a resistor controls the flow of current
C. the light bulb will be off
D. current will flow
In an open circuit like the picture the light bulb will be off. So, option (C) is correct.
What is electric circuit?Electric circuit is a way for current to flow through electricity. An electric circuit consists of a source of energy for the charged particles that make up the current, like a battery or generator; sources of current-using equipment, like lamps, electric motors, or computers; and the connecting wires or transmission lines.
Ohm's law and Kirchhoff's rules are two of the fundamental mathematical laws that define how electric circuits function.
In the given diagram, the circuit is open. So, no current passes through it and the light bulb will be off. Hence, option (C) is correct.
Learn more about electric circuit here:
https://brainly.com/question/29032441
#SPJ2
how large amount of energy is produced during the fission of uranium
Answer:
answer is a very large amount of energy is produced from a very small mass
Explanation:
nuclear energy is produced either by fusion or fission the former is fusion of lighter atoms into heavier elements while the letter is the splitting of a heavier atom into lighter atoms. both produce tremendous amount of energy fusion causes compassion of mass wild fission reduces it. and produce it. fusion does not produce radioactive particles while fission does (alpha and beta particles and neutrons)
A solid disk with a mass of 0.8 kg and a radius of 12cm is rotating at a rate of 2.6 rev/s. Another disk with half the mass and half the radius is dropped on top of the first disk. What is the new angular speed of both disks when they are rotating together?
Answer:
The new angular speed of both disks when they are rotating together is 2.311 revolutions per second.
Explanation:
This situation can be analyzed by the Principle of Conservation of Angular Momentum since there are no external forces and moments being exerted on the system, whose definition is presented below:
[tex]I_{o}\cdot \omega_{o} = I_{f}\cdot \omega_{f}[/tex] (1)
Where:
[tex]\omega_{o}[/tex], [tex]\omega_{f}[/tex] - Initial and final angular speeds, measured in revolutions per second.
[tex]I_{o}, I_{f}[/tex] - Initial and final moments of inertia, measured in kilograms per square meter.
The initial and final moments of inertia of the system are, respectively:
[tex]I_{o} = \frac{1}{2}\cdot m_{o}\cdot r_{o}^{2}[/tex] (2)
[tex]I_{f} = \frac{1}{2}\cdot \left[m_{o}\cdot r_{o}^{2}+\frac{1}{2}\cdot m_{o}\cdot \left(\frac{1}{2}\cdot r_{o} \right)^{2}\right][/tex]
[tex]I_{f} = \frac{1}{2}\cdot m_{o}\cdot r_{o}^{2}+\frac{1}{16}\cdot m_{o}\cdot r_{o}^{2}[/tex]
[tex]I_{f} = \frac{9}{16}\cdot m_{o}\cdot r_{o}^{2}[/tex] (3)
By applying (2) and (3) in (1), we obtain the following expression:
[tex]\frac{1}{2}\cdot m_{o}\cdot r_{o}^{2}\cdot \omega_{o} = \frac{9}{16}\cdot m_{o}\cdot r_{o}^{2}\cdot \omega_{f}[/tex]
[tex]\frac{1}{2}\cdot \omega_{o} = \frac{9}{16}\cdot \omega_{f}[/tex]
[tex]\omega_{f} = \frac{8}{9}\cdot \omega_{o}[/tex] (4)
If we know that [tex]\omega_{o} = 2.6\,\frac{rev}{s}[/tex], then the new angular speed of both disks when they are rotating together is:
[tex]\omega_{f} = \frac{8}{9}\cdot \left(2.6\,\frac{rev}{s} \right)[/tex]
[tex]\omega_{f} = 2.311\,\frac{rev}{s}[/tex]
The new angular speed of both disks when they are rotating together is 2.311 revolutions per second.
A 5.0-g object carries a net charge of 3.8 micro-Coulomb. It acquires a speed v when accelerated from rest through a potential difference V. A 2.0-g object acquires twice the speed under the same circumstances. What is its charge?
Answer:
The value is [tex]q_2 = 6.1 *10^{-6} \ C[/tex]
Explanation:
From the question we are told that
The mass of the object is [tex]m_1 = 5.0 \ g = 0.005 \ kg[/tex]
The net charge is [tex]q = 3.8 \mu C= 3.8 *10^{-6} \ C[/tex]
The mass of the second object is [tex]m_1 = 2.0 \ g = 0.002 \ kg[/tex]
Generally for the first object the potential energy gained at the end of its acceleration is equal to its kinetic energy
i.e
[tex]\frac{ 1}{ 2} * m_1 * v^2_1 = q_1 * \Delta V \ \ --- (1)[/tex]
Here [tex]v_1[/tex] is the velocity of the first object
[tex]\Delta V[/tex] is the potential difference through which it is accelerated
Generally for the second object the potential energy gained at the end of its acceleration is equal to its kinetic energy
i.e
[tex]\frac{ 1}{ 2} * m_2 * v^2_2 = q_2 * \Delta V[/tex]
Here [tex]v_2[/tex] is the velocity of the second object and from the question it is
[tex]v_2 = 2 v_1[/tex]
[tex]\Delta V[/tex] is the potential difference through which it is accelerated
So
[tex]\frac{ 1}{ 2} * m_2 * (2v)^2_1 = q_2 * \Delta V[/tex]
=> [tex]m_2 * 2v^2_1 = q_2 * \Delta V \ \ ---(2)[/tex]
Generally dividing equation 2 by equation 1
[tex]\frac{2m_2 v^2_1 }{ \frac{1}{2} * m_1 * v_1^2} = \frac{q_2 \Delta V }{ q_1 * \Delta V}[/tex]
=> [tex]q_2 = \frac{4m_2 * q_1 }{m_1}[/tex]
=> [tex]q_2 = \frac{4* 0.002 * 3.8 *10^{-6} }{0.005}[/tex]
=> [tex]q_2 = 6.1 *10^{-6} \ C[/tex]
=> [tex]q_2 = 6.1 *10^{-6} \ C[/tex]
Two cars each have a mass of 1050 kg. If the gravitational force between
them is 2.27 x 10-7N, how far apart are they? G = 6.67 10-11 N:(m/kg)2
A. 21 m
B. 5.6 m
C. 33 m
D. 18 m
DUBMIT
Answer: D.
Explanation:
d = ± √ G m 1 m 2 /F
Because distance cannot be negative there it goes:
d = √ G m 1 m 2 /F
d = √ 6.67 ⋅ 10 − 11 ⋅ 1050 ⋅ 1050 2.27 ⋅ 10 − 7
d = √ 0.0000735 2.27 ⋅ 10 − 7
d = √ 3239504.405
d ≈ 1799.86 m = 18m
Ok I am done waiting for an answer for 5 hours can somebody PLEASE PLEASE PLEASE help me TIMED ASSESMENT HERE!!!! PLEASE
A graph titled Speed as a Function of Time with horizontal axis time (seconds) and vertical axis speed (meters per second). A straight orange line labeled A starts at 0 seconds 4 meters per second and runs to 6 seconds 7 meters. A straight blue line labeled B starts at 0 seconds 4 meters and upward to 6 seconds 4 meters. A straight green line starts at 0 seconds 4 meters and runs to 4 seconds 0 meters.
Use the graph of speed versus time to answer the questions about acceleration.
Which of the cars is speeding up?
Which of the cars is slowing down?
Which of the cars is maintaining a constant speed?
Answer:
Explanation:
I'm going to assume that all the givens are in m/s. If I am correct, The orange line is speeding up. It is going from 4 m/s to 7 m/s. Its slant is from lower left to upper right. It is increasing in speed.
The green line is slowing down. It is going from 4 to 0 m/s. It's slant is from upper left to lower right.
The blue line is horizontal. It is neither slowing down or speeding up.
Answer:
sorry for being very very very late, but here is your answer)
car speed A
car slow down C
car constant speed B
hope this helped!!!!
Why are doorknobs placed at the edge of a door rather than in the center
Answer: so it can reach the frame
Explanation:
Answer:
To increase force on the door
A uniform hollow spherical ball of mass 1.75 kg and radius 40.0 cm rolls without slipping up a ramp that rises at 30.0° above the horizontal. The speed of the ball at the base of the ramp is 2.63 m/s. While the ball is moving up the ramp, find (a) the acceleration (magnitude and direction) of its center of mass and (b) the friction force (magnitude and direction) acting on it due to the surface of the ramp.
Answer:
2.94 m/s²
3.43 N
Explanation:
To start with, the combination of rotational and translational kinetic energy can be converted to gravity potential energy. So, we will apply this in solving our question.
PE = KE
mgh = ½mv² + ½Iω²
Moment of inertia of a hollow sphere
I = ⅔mr²
We also know that,
ω = v/r, so if we substitute for ω and I, we have
mgh = ½mv² + ½(⅔mr²)(v/r)², simplifying
gh = ½v² + ½(⅔r²)(v/r)², simplifying further
gh = ½v² + ⅓v², adding up
gh = (5/6)v², making h subject of formula
h = 5v²/6g
Now, we substitute for v and g to have
h = 5(2.63)² / 6(9.81)
h = 34.585 / 58.86
h = 0.588 m
To get the distance that the ball rolls on the ramp before stopping, we say
d = 0.588 / sin30.0
d = 0.588 / 0.5
d = 1.176 m
so acceleration is
a = (2.63² - 0²) / 2(1.176)
a = 6.917 - 0 / 2.352
a = 2.94 m/s
B
Neglecting friction, the sphere acts like a point mass and tends to rise.
mgh = ½mv², simplifying
h = v²/2g
h = 2.63² / 2(9.81)
h = 6.917 / 19.62
h = 0.353 m
The work done by the friction force is the same as the rotational kinetic energy of the sphere, so we say
U = KEr
Fd = ½Iω²
Fd = ½(⅔mr²)(v/r)²
Fd = ⅓mv²
F = mv²/3d
where d is the actual distance up the slope the sphere did roll.
The average friction force is thus
F = 1.75(2.63)² / 3(1.176)
F = 1.75 * 6.917 / 3.528
F = 12.1 / 3.528
F = 3.43 N
Putting the selected answers in parenthesis
A cation has a (Negative, Positive, Neutral) charge, because they have (Lost, Maintained, Gained) electrons. An anion has a (Negative, Positive, Neutral) charge, because they have (Lost, Maintained, Gained) electrons. An atom with the same number and protons and neutrons have a (Negative, Positive, Neutral) charge.
Answer:
gimmie
Explanation:
A car jack works when a mechanic uses a force 3.8 N, on a small piston of radius 10 cm. What force can he exert on a larger piston of radius 0.22 m?
Answer:
18.392 N
Explanation:
Given that,
Smaller force acting on the car, F₁ = 3.8 N
Radius of smaller radius, r₁ = 10 cm = 0.1 m
The radius of the larger piston, r₂ = 0.22 m
We need to find the force exerted on the larger piston. Let it is F₂.
Using the relation,
[tex]\dfrac{F_1}{F_2}=\dfrac{A_1}{A_2}\\\\\dfrac{F_1}{F_2}=\dfrac{\pi r_1^2}{\pi r_2^2}\\\\\dfrac{F_1}{F_2}=\dfrac{r_1^2}{r_2^2}\\\\F_2=\dfrac{F_1r_2^2}{r_1^2}\\\\F_2=\dfrac{3.8\times (0.22)^2}{(0.1)^2}\\\\F_2=18.392\ N[/tex]
Hence, the force exerted on the larger piston is 18.392 N.
Two clear but non-mixing liquids each of depth 15 cm are placed together in a glass container. The liquids have refractive indices of 1.75 and 1.33. What is the apparent depth of the combination when viewed from above?
A. 19.8 cm.
B. 23.1 cm.
C. 9.9 cm.
D. None of these are correct.
Answer:
A. 19.8 cm.
Explanation:
The apparent depth of the combination is
As it mentioned that the two clear but non-mixing liquid having depth of 15 cm that placed in a glass container together
Also the refractive indices would be 1.75 and 1.33
Based on the above information
As we know that
Refractive indices = real depth ÷ apparent depth
1.33 ÷ 1.75 = 15 ÷ apparent depth
So, it would be 19.736842 cm
Now the combination of apparent depth would be
= ( 19.736842 + 15) ÷ (1.75)
= 19.8 cm
hence, the correct option is A.
WILL MARK BRAINLIEST JUST PLEASE HELP
Answer:
40N in either direction is the answer
A truck pushes a pile of dirt horizontally on a frictionless road with a net force of
20
N
20N20, start text, N, end text for
15.0
m
15.0m15, point, 0, start text, m, end text.
How much kinetic energy does the dirt gain?
Answer:
300 JoulesExplanation:
This is a common question on Khan Academy's "Calculating change in kinetic energy from a force" practice exercises. (AP Physics 1)
The simplest method to use is the following: [tex]W = F * d * cos(theta)[/tex], where W represents work (joules), F represents force (newtons), d represents distance (meters), and theta represents the angle of the force that's being applied.In this scenario, the force being applied is horizontal, so we can remove the [tex]cos(theta)[/tex] from our equation.So, our equation is now: [tex]W = F * d[/tex]. This would mean that [tex]W = 20 * 15[/tex], which is equal to [tex]300[/tex]. Our answer is 300 joules. (this value is positive and not negative because kinetic energy is being GAINED, not LOST)Here's the real question without all the formatting:
A truck pushes a pile of dirt horizontally on a frictionless road with a net force of 20 N for 15.0 m. How much kinetic energy does the dirt gain?A truck pushes a pile of dirt in the horizontal direction with a force of 20 N to a distance of 15 m then the kinetic energy of the dirt is 300 J.
What is work?In physics, the term "work" refers to the measurement of energy transfer that takes place when an item is moved over a distance by an externally applied, at least a portion of which is applied inside the direction of the displacement.
The duration of the path is multiplied by the component of a force acting along the path to calculate work if the forces are constant. The work W is theoretically equivalent to the pressure f times the range d, or W = fd, to represent this idea. Work is done when a force is applied at an angle of to a displacement, or W = fd cos.
The work done, [tex]W = Force * Displacement[/tex]
W = 15× 20
W = 300 J
To know more about Work:
https://brainly.com/question/18094932
#SPJ3
The maximum electric field strength in air is 3.0 Mv/m . Stronger electric fields ionize the air and create a spark. What is the maximum power that can be delivered by a 1.5cm diameter laser beam propagating through air?
Answer:
The value is [tex]P_{max} = 2.11 * 10^{6} \ W[/tex]
Explanation:
From the question we are told that
The maximized electric field strength is [tex]E = 3.0 \ MV/m = 3.0 *10^{6} \ V/m[/tex]
The diameter is [tex]d = 1.5\ cm = 0.015 \ m[/tex]
Generally the cross -sectional area is mathematically represented as
=> [tex]A = \frac{\pi * d^2 }{4}[/tex]
=> [tex]A = \frac{3.142 * 0.015^2 }{4}[/tex]
=> [tex]A = 0.0001767 \ m^2[/tex]
Generally the maximum power is mathematically represented as
[tex]P_{max} = \frac{E_{max}^2}{ 2 * \mu_o * c } * A[/tex]
Here c is the speed of light with value [tex]c = 3.0 *10^{8} \ m/s[/tex]
[tex]\mu_o[/tex] is the permeability of free space with value [tex]\mu_o = 4 \pi *10^{-7} \ H/m[/tex]
[tex]P_{max} = \frac{ (3.0 *10^{6})^2}{ 2 * (4 \pi *10^{-7}) * 3.0 *10^{8} } * 0.0001767[/tex]
=> [tex]P_{max} = 2.11 * 10^{6} \ W[/tex]
The maximum power that can be delivered by a laser beam propagating through air is equal to [tex]2.11 \times 10^6\;Watts[/tex]
Given the following data:
Electric field strength in air = 3.0 Mv/m = [tex]3 \times 10^6\;v/m[/tex]Diameter = 1.5 cm to m = 0.015 meter.Radius = [tex]\frac{Diameter}{2} = \frac{0.015}{2} = 0.0075\;meter[/tex]
Scientific data:
Permeability of free space = [tex]1.25663706 \times 10^{-6}\;H/m[/tex]Speed of light = [tex]3 \times 10^8\;m/s[/tex]To determine the maximum power that can be delivered by a laser beam propagating through air:
First of all, we would solve for the area of the laser beam as follows:
[tex]Area = \pi r^2\\\\Area = 3.142 \times 0.0075^2\\\\Area = 3.142 \times 0.00005625\\\\Area = 1.77 \times 10^{-4}\;m^2[/tex]
Now, we can determine the maximum power that can be delivered by a laser beam:
Mathematically, maximum power is given by the formula:
[tex]P_{max} = \frac{AE_{max}^2}{2 \mu_o c}[/tex]
Substituting the given parameters into the formula, we have;
[tex]P_{max} = \frac{1.77 \times 10^{-4} \;\times \;(3 \times 10^6)^2}{2 \;\times \;1.25663706 \times 10^{-6} \; \times \;3 \times 10^8}\\\\P_{max} = \frac{1.77 \times 10^{-4} \;\times \;9 \times 10^{12}}{753.982236}\\\\P_{max} = \frac{1593000000}{753.982236}\\\\P_{max} = 2.11 \times 10^6\;Watts[/tex]
Read more on maximum power here: https://brainly.com/question/12356566
What are Newton’s 3 laws of motion?
Answer: It states that for every action, there is an equal and opposite reaction.
I hope this helps, and Happy Holidays! :)
When an element ejects an alpha particle, the mass number of that element
A.reduce by 4.
B.remains unchanged.
C.increase by 1.
D. reduce by 1.
Answer:
A.reduce by 4.
Explanation:
In Chemistry, an alpha particle which is typically a helium nucleus has an atomic mass (number of nucleons) of four (4). Therefore, the ejection of an alpha particle by any chemical element simply means that, the mass number of that particular chemical element would be reduced by four (4).
Basically, this process is referred to as an alpha decay and can be defined as a radioactive disintegration of a chemical element that causes it to emit an alpha particle and as a result reducing its mass number by four (4).
Hence, when an element ejects an alpha particle, the mass number of that element reduces by 4.
What is the steady state rate of heat flow through a pane of glass that is 40.0 cm by 30.0 cm with a thickness of 4.00 mm when the outside temperature of the glass is −10.0℃ and its inside temperature is 25.0℃? The thermal conductivity of glass is 0.105 W/(m⋅K); the specific heat of glass is 0.180 cal/(g⋅℃); and 1 cal = 4.190 J.
Answer:
110.25 watt/s
Explanation:
The rate of heat transfer is given by the formula
R = k*A(T1 - T2) / d, where
k = thermal conductivity, 0.105 (W/(m*K)
d = thickness, 4 mm = 0.004 m
T1 = inside temperature, 25° C
T2 = outside temperatures, -10° C
A = area 0.3 * 0.4 = 0.12 m²
Now, applying the given data to the formula, we have
Rate = 0.105 * 0.12 (25 - -10) / 0.004
Rate = 0.105 * 0.12(35) / 0.004
Rate = 0.105 * 4.2 / 0.004
Rate = 0.441 / 0.004
Rate = 110.25 Watt/s
Therefore, the steady state rate of heat flow is 110.25 watt/s
I need help ASAP!
1. Two wave pulses move towards each other as shown below. The pulses have the same width and amplitudes.
What is the resulting wave pattern when the centers of the two pulses meet?
Answer:
b.
Explanation:
The resulting wave pattern when the centers of the two pulses meet is undergo constructive interference.
When two waves meet?Waves are pulses of energy that propagate through space periodically. When two waves overlap in the same region of space, interference occurs, which results in another wave with different intensity. These variations in the intensity of the resulting wave are called interference fringes.
The two pulses propagate with the same phase and in opposite directions, when they meet, they suffer constructive interference, which will cause the sum of the amplitudes. After interference, each wave goes its way as if nothing happened.
See more about waves at brainly.com/question/3639648
TRUE/FALSE, the scientific question is written like “I wonder if [dependent variable] is affected by [independent variable].”
One of two 25-year-old identical twins begins a trip on a spaceship traveling at 0.8 c while her twin remains on Earth. The twin on Earth tracks her twin's trip for 10 years. After ten years, what age is the twin on the spaceship according to the twin on Earth?
a. 41.7 years old.
b. 35 years old.
c. 31 years old.
d. 37.5 years old.
An aluminum baking sheet with a mass of 225 g absorbs 2.4 x 104 J from an oven. If its temperature was initially 25 C, what will its new temperature be?
Answer:
The value is [tex]T_2 =416.9 \ K[/tex]
Explanation:
From the question we are told that
The mass of the aluminum baking sheet is [tex]m = 225 \ g = 0.225 \ kg[/tex]
The energy absorbed is [tex]E = 2.4 *10^{4} \ J[/tex]
The initial temperature is [tex]T_1 = 25 ^oC = 25 + 273 = 298 \ K[/tex]
Generally the heat absorbed is mathematically represented as
[tex]Q = m * c_a * [T_2 - T_1][/tex]
Here [tex]c_a[/tex] is the specific heat capacity of aluminum with value [tex]c_a = 897 \ J / kg \cdot K[/tex]
So
[tex]2.4 *10^{4 } =0.225 * 897 * [ T_ 2- 298][/tex]
=> [tex]T_2 - 298 = 118.915[/tex]
=> [tex]T_2 =416.9 \ K[/tex]
1+1=?
FIRST ONE TO ANSWER GETS BRAINLIEST!
Answer:
Thx for points merry Christmas answer 2
Explanation:
Answer:2
Explanation:
When a object is electrically charged, ____ have been added or removed.
A) Neutrons
B) Electrons
C)Protons
Answer:
B, electrons.
Explanation:
An electrical charge is created when electrons are transferred to or removed from an object. Because electrons have a negative charge, when they are added to an object, it becomes negatively charged. When electrons are removed from an object, it becomes positively charged.
