Answer:
d
Explanation:
Is sodium chloride a reactant
Answer:
yes it is a reactant
Only the healthy foods we eat provide
energy to our body
true
false
Answer:
True
Explanation:
Yes absolutely the food which provede us energy is termed as healthy..
Describe the parts of a hurricane and the hazards of a Category 3 Hurricane.
A category three hurricane are major ones that can cause incredible damage like blowing off roofs, cause power outages, uproot trees, lead old buildings to fall, etc. The parts of a hurricane are the eye, storm surge, eyewall, rain bands, and outflow.
Two point charges, Q1 = -1.0 PC and Q2 = +3.0 PC, are placed as shown in the diagram.
What is the vertical component of the electric field at the origin? Let the constant k = 9.0 x
109Nm²/C2
2.2 m
2.1 m Q1
O A zero
O B. -2100 N/C
O
C. 2100 N/C
o D. -8900 N/C
E. 8900 N/C
NEED ANSWER NOW
NO LINK
An outside thermometer reads 57°F. What is this temperature in °C? Round your answer to the nearest whole number. 14 49 71 135
Answer:
An outside thermometer reads 57°F. What is this temperature in °C? Round your answer to the nearest whole number.
14
49
71
135
answer is A:14
Explanation:
The temperature of the thermometer which reads 57 °F in degree celsius (°C) to the nearest whole number is 14 °C
Conversion formulaWe can convert from degree celsius (°C) to degree Fahrenheit (°F) with the following equation
°C = 5/9(°F – 32)
How to determine the temperature in degree celsius (°C) Temperature (°F) = 57 °FTemperature (°C) =?°C = 5/9(°F – 32)
°C = 5/9(57 – 32)
°C = 5/9 × 25
°C = 14 °C
Thus, the temperature in degree celsius (°C) of the thermometer is 14 °C
Learn more about conversion:
https://brainly.com/question/2139943
HELP pleaseee which nucleus completes the following equation?
Answer:
its D
Explanation:
i just got it correct on a. p. e. x. :)
What type of energy is thermal energy? A. Sound energy B. Chemical energy C. Kinetic energy D. Nuclear energy
Answer:
kinetic energy
Explanation:
Which of the following are the two factors used to calculate average
speed? *
a. total acceleration and total time
b. velocity and time
c. total distance and total time
d. motion and time
Answer:
i think its its c but im not positive :>
Explanation:
Imagine you leave the dock on a fishing boat that travels east for 30 kilometers when the captain realizes he left the fishing rods on the dock. It takes him 40 minutes to travel out against the current but only 20 minutes to return to the dock.
Answer:
Average speed is 60 km/hr whereas average velocity is 0 km/ hr.
Explanation:
The average speed of the boat is 60 km/ hr while on the other hand, the average velocity of the boat is 0 km/ hr because average speed is the total distance covered by the boat in total time and average velocity is the displacement covered by the boat in total time. The total distance covered by the boat is 60 km and the total time is 60 minutes which is equals to one hour so the answer is 60 km/hr whereas the displacement is the shortest distance between initial and final position which is 0 in this case so 0 divided by 60 minutes or one hour is also 0.
A car and a semi-truck are both traveling along a road. Based on Newton's 2nd law, what will happen if both cars apply the same type of brakes at the same time?
Answer: ask god in your prayers
Explanation: im here for the same reason you are
I DONT KNOW THE ANSWER
Answer:
The semi-truck will stop after the car.
Explanation:
It will do that because the semi-truck has more mass than the car.
Use the drop-down menus to complete the statements. Outlook allows users to insert symbols and characters not located on the , but they can have shortcut keys. Inserting horizontal lines in the message body breaks up different sections and mostly benefits people using Outlook on .
Answer:
Keyboard and Mobile devices
Explanation:
got it right on edge 2021
Answer:
Outlook allows users to insert symbols and characters not located on the
keyboard
, but they can have shortcut keys.
Inserting horizontal lines in the message body breaks up different sections and mostly benefits people using Outlook on
mobile devices
.
Explanation:
Atmospheric pressure on the peak of Mt. Everest can be as low as 0.197 atm, which is why
climbers need to bring oxygen tanks for the last part of the climb. If the climbers carry 10.0
liter tanks with an internal gas pressure of 40 atm, what will be the volume in liters of the gas
when it is released from the tanks?
Answer:2,030
Explanation:
40 atm x 10.0 L = 400
400/0.197 atm = 2,030
What makes water a natural resource?
A.
It is a natural material that can be easily replaced.
B.
It is a material found in nature that people can use.
C.
It is a material that people can easily make and use.
D.
It is a energy source that cannot be replaced.
Answer:
I belive is the answer is B. It is a material found in nature that people can use. Because water is technically a natural resource.
What is the color of lava at its hottest? Help asap
Do you think the plan for the skyscraper in California is appropriate based on its location? Why or why not? Your answer should include at least three complete sentences. (plz write out answer) (this is about earth quakes)
Answer:
No
Explanation:
No because like my other answer if we put to many diesels on it it will crack and little by little it will break eventually everyone will come tumbling into the water making them drown because they can't get the buckles loose or they wanted to save their families lives
What is the relationship between large amplitude waves and small amplitude waves?
A Both waves have variable energy.
B Large amplitude waves have more energy than small amplitude waves.
C Large amplitude waves have less matter than small amplitude waves.
D Both waves have constant matter.
Answer:
c.large amplitude waves have less matter than small amplitude waves
In a real pully system the work supplied must be _____ the work accomplished and no links plz
7. Thermal energy depends upon the______ and _____ of an object?
:
Please give me brainly,
The thermal energy of an object depends on three things: 4 the number of molecules in the object 4 the temperature of the object (average molecular motion) 4 the arrangement of the object's molecules (states of matter). The more molecules an object has at a given temperature, the more thermal energy it has.
Mass and Temperarture
I am pretty sure that is right if Not sorry
Have a great day.
How much work is done when a car is moved 10 m with a force of 3.4 N?
Answer:
34J I assume
Explanation:
force×distance is work done. 10×3.4 is 34. therefore its 34 joules of work done
Answer:
34J
Explanation:
The formula for work is W=Force x Distance
W=FxD
F=3.4N
D=10m
W=10x3.4
W=34 Joules
A cyclist travels 21 km in 90 minutes. Calculate, in m s–1 , the speed of the cyclist.
Answer:
35/9 m/s
Explanation:
21 km = 21000 m
90 min = 90*60 s = 5400 s
21000/5400 = 35/9 m/s
PLS ANWSER FAST WILL GIVE BRAINL!!!!
Explain to me in YOUR own words, how convection currents create a cycle? In other words, tell me how heat and cooling create a cycle.
Answer:
because it get the energy from the heat and the cold mixed together
Explanation:
The equivalent resistance in a series circuit is found by ____
the resistances of all the resistors.
A. multiplying
B. comparing
C. adding the reciprocals of
D. adding
Explanation:
In a series circuit the equivalent resistance is the algebraic sum of the resistances.
Kamal, Kamala, Krishna invert a sum of RS= 30,000 on a business in the ratio 2 : 3 : 5. Find the each of their investment.
Answer:
Explanation:
Kamal, Kamala, Krishna invert in the ratio 2 : 3 : 5.
As 2+3+5 =10, their respective share is 2/10, 3/10 and 5/10.
Sum of investment = 30000Rs
Kamal's investment = 30000 * 2/10 = 6,000 Rs
Kamala's investment = 30000 * 3/10 = 9,000 Rs
Krishna's investment = 30000 * 5/10 = 15,000 Rs
Show that liquid pressure is directly
proportional to height of liquid in a vessel.
Answer:
P=F/A where F is the weight of the water and A is the area on which it is resting. The weight of the water is mg. The mass of the water is dv where d is the density and v is the volume. Finally, the volume of the water in a vessel is equal to the area of the base of the vessel times the height of the vessel. (v=Ah)
Plugging everything in we get:
P = dAhg/A
So
P=dhg
So we have shown that liquid pressure is directly proportional to height of liquid in a vessel.
If the current of a circuit is 1.5 A, and the power is 24 W. what is the resistor?
Answer:
The resistor has a resistance of 10.667 ohms.
Explanation:
By Ohm's Law, voltage ([tex]V[/tex]), in volts, is directly proportional to the current ([tex]i[/tex]), in amperes, and by definition of power ([tex]\dot W[/tex]), in watts, we have the following formula:
[tex]\dot W = i^{2}\cdot R[/tex] (1)
Where [tex]R[/tex] is the resistance, in ohms.
If we know that [tex]\dot W = 24\,W[/tex] and [tex]i = 1.5\,A[/tex], then the resistance of the resistor is:
[tex]R = \frac{\dot W}{i^{2}}[/tex]
[tex]R = 10.667\,\Omega[/tex]
The resistor has a resistance of 10.667 ohms.
1.45 L of 16°C water is placed in a refrigerator. The refrigerator's motor must supply an extra 10.7 W power to chill the water to 6°C in 0.7 hr. What is the refrigerator's coefficient of performance?
Answer:
The coefficient of performance of the refrigerator is 2.251.
Explanation:
In this case, the coefficient of performance of the refrigerator ([tex]COP[/tex]), no unit, is equal to the ratio of the heat rate received from the water to the power needed to work, that is:
[tex]COP = \frac{\dot Q_{L}}{\dot W}[/tex] (1)
[tex]COP = \frac{\rho\cdot V\cdot c_{w}\cdot \Delta T}{\dot W \cdot \Delta t}[/tex] (2)
Where:
[tex]\dot Q_{L}[/tex] - Heat rate received from the water, in watts.
[tex]\dot W[/tex] - Power, in watts.
[tex]\rho[/tex] - Density of water, in kilograms per cubic meter.
[tex]V[/tex] - Volume of water, in cubic meters.
[tex]c_{w}[/tex] - Specific heat of water, in joules per kilogram-degree Celsius.
[tex]\Delta T[/tex] - Temperature change, in degrees Celsius.
[tex]\Delta t[/tex] - Cooling time, in seconds.
If we know that [tex]\rho = 1000\,\frac{kg}{m^{3}}[/tex], [tex]V = 1.45\times 10^{-3}\,m^{3}[/tex], [tex]c_{w} = 4187\,\frac{J}{kg\cdot ^{ \circ}C}[/tex], [tex]\Delta T = 10\,^{\circ}C[/tex], [tex]\dot W = 10.7\,W[/tex] and [tex]\Delta t = 2520\,s[/tex], then the coefficient of refrigeration of the refrigerator is:
[tex]COP = \frac{\rho\cdot V\cdot c_{w}\cdot \Delta T}{\dot W \cdot \Delta t}[/tex]
[tex]COP = 2.251[/tex]
The coefficient of performance of the refrigerator is 2.251.
Which is used to zero a triple beam balance
A.
the pan
B.
a rider
C.
a beam
D.
the tare knob
how long would it take a leopard, running at an average speed of 20 m/s to travel 500 m?
Answer:
25 seconds
Explanation:
500/20
What happens, if anything, when you change the mass of the planet? Why do you think the mass of the planet does, or does not, affect the orbit of the planet?
Answer:
We know that the gravitational force between two objects of mass M1 and M2 that are at a distance R, is given by:
F = G*(M1*M2)/R^2
Where G is a constant.
If you reduce one of the masses, then the gravitational force between the objects will change.
So if we take un account the Earth and the Sun, when you reduce the mass of Earth, the force between Earth and the Sun will decrease, and this will change the orbit of the Earth around the Sun.
(The orbit also depends on the gravitational force between the Earth and the other planets in the system, and all those forces also change, which also has an impact in the orbit change)
A 13 500 N car traveling at 50.0 km/h rounds a curve of radius 2.00 × 102 m. Find the following: a. the centripetal acceleration of the car b. the centripetal force c. the minimum coefficient of static friction between the tires and the road that will allow the car to round the curve safely
Answer:
a. 0.947 m/s^2
b. 1304.54 N
c. 0.0966
Explanation:
mass of car = 13500 N = 13500/9.8 = 1377.55 kg
velocity = 50 km/h = 50,000 m/h = 13.9 m/s
raidus = 204 m
a. centripetal acceleartion = v^2/r = 13.9^2/204 = 0.947 m/s^2
b. centripetal force = m*centripetal acceleration = 1377.55 * 0.947 = 1304.54 N
c. In order for the car to round the curve safely, static friction = centripetal force
static friction = coefficient of friction (mu) * mg = mu* 1377.55*9.8 = 13500mu
13500mu = 1304.54
mu = 1304.54/13500 = 0.0966
The acceleration, force and coefficient of friction is required.
Centripetal acceleration is [tex]0.965\ \text{m/s}^2[/tex]
Centripetal force is [tex]1328\ \text{N}[/tex]
Coefficient of friction is [tex]0.1[/tex]
N = Weight of car = 13500 N
v = Velocity = [tex]50=\dfrac{50}{3.6}=13.89\ \text{m/s}[/tex]
r = Radius = [tex]2\times 10^2\ \text{m}[/tex]
m = Mass of car = [tex]\dfrac{N}{g}[/tex]
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
Centripetal acceleration is
[tex]a_c=\dfrac{v^2}{r}\\\Rightarrow a_c=\dfrac{13.89^2}{2\times 10^2}\\\Rightarrow a_c=0.965\ \text{m/s}^2[/tex]
Force is given by
[tex]F_c=ma_c\\\Rightarrow F_c=\dfrac{N}{g}a_c\\\Rightarrow F_c=\dfrac{13500}{9.81}\times 0.965\\\Rightarrow F_c=1328\ \text{N}[/tex]
Coefficient of friction is given by
[tex]\mu=\dfrac{F_c}{N}\\\Rightarrow \mu=\dfrac{1328}{13500}\\\Rightarrow \mu=0.098\approx 0.1[/tex]
Learn more:
https://brainly.com/question/19487466?referrer=searchResults