Which term describes this reaction?

A- addition
B- condensation
C- elimination
D- substitution

Answer: 2.13

Explanation: i crawled so you could run :)

Answer:

Astronomers have observed their movements over time

Explanation:

Just took the test!!!

The future collision of Andromeda and milky way are known by astronomers because ; ( C ) Astronomers have observed their movements over time

Andromeda also known as messier 31 is a spiral galaxy that appears as a  milky blur when viewed from the earth and it is believed to be slightly over 2.5 million years old.

Astronomers predict that based on its movement and the movement of the Milky way there is most likely going to be a collision in future between the Andromeda and milky way.

Hence we can conclude that The future collision of Andromeda and milky way are known by astronomers because Astronomers have observed their movements over time

Learn more : https://brainly.com/question/2849133

Answer:

- From octane: [tex]m_{CO_2}=1.54x10^5gCO_2[/tex]

- From ethanol: [tex]m_{CO_2}=9.57x10^4gCO_2[/tex]

Explanation:

Hello,

At first, for the combustion of octane, the following chemical reaction is carried out:

[tex]C_8H_{18}+\frac{25}{2} O_2\rightarrow 8CO_2+9H_2O[/tex]

Thus, the produced mass of carbon dioxide is:

[tex]m_{CO_2}=5.00x10^4gC_8H_{18}*\frac{1molC_8H_{18}}{114gC_8H_{18}}*\frac{8molCO_2}{1molC_8H_{18}}*\frac{44gCO_2}{1molCO_2} \\\\m_{CO_2}=1.54x10^5gCO_2[/tex]

Now, for ethanol:

[tex]C_2H_6O+3O_2\rightarrow 2CO_2+3H_2O[/tex]

[tex]m_{CO_2}=5.00x10^4gC_2H_6O*\frac{1molC_2H_6O}{46gC_2H_6O}*\frac{2molCO_2}{1molC_2H_6O}*\frac{44gCO_2}{1molCO_2} \\\\m_{CO_2}=9.57x10^4gCO_2[/tex]

Best regards.

Answer:

[tex]4.6\,\,moL\,\,L^{-1}[/tex]

Explanation:

Molarity refers to a measure of concentration.

Molarity = moles of solute/Litres of solution

Molarity refers to number of moles of solute present in this solution.

In order to find a solution's molarity, use value for the number of moles of solute  and the total volume of the solution expressed in liters

As molarity of 2.3 mol of Kl is dissolved in 0.5 L of water,

Molarity = [tex]\frac{2.3}{0.5} =4.6\,\,moL\,\,L^{-1}[/tex]

Answer:

[tex]x = 6.634\times 10^{23}\,atoms[/tex]

Explanation:

The quantity of atoms within the mass of copper is determined by multiplying the quantity of moles by the Avogadro's Number:

[tex]x = \left(\frac{70\,g}{63.546\,\frac{g}{mol}} \right)\cdot \left(6.022\times 10^{23}\,\frac{atoms}{mol} \right)[/tex]

[tex]x = 6.634\times 10^{23}\,atoms[/tex]

Answer:

6.64x10^23 atoms.

Explanation:

From Avogadro's hypothesis, 1 mole of any substance contains 6.02x10^23 atoms. This implies that 1 mole of Cu also contains 6.02x10^23 atoms.

1 mole of Cu = 63.5g

If 63.5g of Cu contains 6.02x10^23 atoms,

Then 70g of Cu will contain = (70x6.02x10^23) /63.5 = 6.64x10^23 atoms.

Therefore, there are 6.64x10^23 atoms in 70g oh Cu

Answer:

Option B is correct.

0.119 mole of Kr has a mass of 10.0 g

Explanation:

The complete Question was ontained online, albeit, it was incomplete, even from the online source. But the solution is possible based on the part of the question obtained.

Complete Question

Which of the following Noble Gases has a mass of 10.0 g?

A. 2.02 mol Ne B. 0.119 mol Kr C.

Solution

Number of moles = (Mass)/(Molar Mass)

Mass = (Number of moles) × (Molar mass)

Checking the options, one at a time,

A. 2.02 moles of Neon

Number of moles = 2.02 moles

Molar Mass of Neon = 20.1797 g/mol

Mass = 2.02 × 20.1797 = 40.762994 g ≠ 10.0 g

Not the answer.

B. 0.119 moles of Krypton

Number of moles = 0.119 moles

Molar Mass of Krypton = 83.798 g/mol

Mass = 0.119 × 83.798 = 9.971962 g ≈ 10.0 g

This is definitely the answer.

Hope this Helps!!!

Answer: 0.119 mol Kr

Explanation:

Answer: 3.05L= V2

Explanation:

using

P1V1/T1=P2V2/T2

where p1= 345torr

T1, tempertaure= -15c+ 273=258K

T2, temperature= 36+ 273=309K

p2, Pressure= 468 torr

V2=???

P1V1/T1=P2V2/T2

v2=P1V1T2/T1P2= 345X3.46L X 309/ 258X 468=

V2=  3.05L

Answer: molecules get closer

Explanation:

Condensation is the process in which molecules of a gas slow down, come together, and form a liquid. When gas molecules transfer their energy to something cooler, they slow down and their attractions cause them to bond to become a liquid

hope this helps

pls mark me brainliest

Answer:

D. The molecules get closer together and move more slowly.

Answer: The inner layers are core, radiative zone, and convective zone. The putter layers a photosphere, the chromosphere, the transition region and the corona

Answer: 1- gas 2- solid

Explanation:

Answer:

?

Explanation:

What are the statements? You've given the passage but not the statements

Answer:

Ideal Gas Law

PV = nRT

Explanation:

Pressure is proportional to temperature;

The heat of the fire would cause increased pressure inside the closed aerosol vessel, eventually resulting in explosion of the vessel, once the temperature rises enough.

Answer:

- [tex][H^+]=1x10^{-12}[/tex]

- Basic.

Explanation:

Hello,

In this case, given the concentration of hydroxyl ions, one could compute the pOH as shown below:

[tex]pOH=-log([OH^-])=pOH=-log(1x10^{-2})=2[/tex]

Then, since the pOH and the pH are related by:

[tex]pH+pOH=14[/tex]

One computes the pH:

[tex]pH=14-pOH=14-2=12[/tex]

Now, we compute the concentration of hydronium by:

[tex][H^+]=10^{-pH}=10^{-12}[/tex]

[tex][H^+]=1x10^{-12}[/tex]

Finally, since the pH is greater than 7 (neutral point) we conclude that the solution is basic.

Best regards.

Answer:

A. Hydrogen ion concentration, [H+] is 1x10^–12 mol/L

B. Since the pH is 12, the solution is basic.

Explanation:

Data obtained from the question. This includes the following:

Concentration of Hydroxide ion, [OH-] = 1x10^–2 mol/L

Concentration of Hydrogen ion, [H+] =.?

pH =..?

A. Determination of the hydrogen ion concentration, [H+] .

The hydrogen ion concentration, [H+] can be obtained as follow:

[H+] x [OH-] = 1x10^–14

[OH-] = 1x10^–2

[H+] x 1x10^–2 = 1x10^–14

Divide both side by 1x10^–2

[H+] = 1x10^–14 / 1x10^–2

[H+] = 1x10^–12 mol/L

B. Determination of the pH of the solution.

The pH of the solution can be obtained as follow:

pH = –Log [H+]

[H+] = 1x10^–12 mol/L

pH = –Log 1x10^–12

pH = 12.

Then pH of a solution ranges between 0 and 14.

A pH reading between 0 and 6 is termed an acidic solution, a pH reading of 7 is termed a neutral solution and a pH reading between 8 and 14 indicates an alkaline or a basic solution.

The higher the pH value, the more alkaline or basic the solution becomes.

Since the pH is 12, the solution is basic.

Answer:

The options that apply to the description of grid-lines of the map are;

They are measured in degrees

They set up a reference system

They divide Earth into four equal parts

FIRST OPTION , SECOND OPTION and FIFTH OPTION are correct.

Explanation:

FIRST OPTION gave the describtion that the grid-lines of the map are measure in degrees,this option is applied to the gridlines on a map because the grid are lined as a result of angular measurement which makes it to makes the unit to be measured degrees and angles.

SECOND OPTION described it as been set up by a reference system which let us know that the area that are plotted were all grid as a result of the size

FIFTH OPTION also applied to the

description of the gridlines on a map because the Earth is divided into 4 equal parts through the Prime Meridian i.e the latitudinal line and longitudinal line .

.

Answer:

They are measured in degrees.

They set up a reference system.

They divide Earth into four equal parts.

Explanation:

i took the test

Answer:

It uses the mass and specific heat of water along with a thermometer to measure the gain or loss of energy when a substance is added.

Explanation:

The calorimeter is an instrumental device, which is used to measure the heat of chemical reactions. The heat is measured when the reactants change their state in specified conditions.

The correct answer is:

Option D. It uses the mass and specific heat of water along with a thermometer to measure the gain or loss of energy when a substance is added.

The coffee cup calorimeter works as:

1. Coffee cup is a type of insulator. The cup of styrofoam with an inserted thermometer can calculate the heat transfer.

2. The thermometer is used to measure the change in the enthalpy of the reaction.

3. The water in the cup absorbs the heat from a reaction, and the cup is adiabatic. Thus, the outer cup is an insulator.

4. The coffee cup measures the specific heat and mass of the water during a chemical change.

Thus, the coffee cup calorimeter uses the heat transfer and mass of the water when a substance is added.

To know more about calorimeter, refer to the following link:

https://brainly.com/question/10987564

Answer:

77.5 grams of Na2O

Explanation:

Convert grams to mols.

1.06 x 10^2 grams x 1 mol NaOH/39.99

= 2.50 mols NaOH

Find the mole ratio of NaOH and Na2O

1:2

Convert mols NaOH to Na2O mols

2.50 mols NaOH x 1 mol Na2O/2 mols NaOH

= 1.25 mols Na2O

Convert to grams

1.25 mols Na2O x 61.98 grams Na2O/1 mol

= 77.5 grams Na2O required to produce 1.06 x 10^2 grams of NaOH

Answer:

B) 88.6%

Explanation:

Percent yield equals actual yield divided by theoretical yield

actual yield is 31.0g

theoretical yield is 35g

percent yield was 88.57 which rounds up to 88.6%

Answer:

Hydrogen bonding.

Explanation:

Ammonium lauryl sulfate is also known as ammonium dodecyl sulfate there are two parts in Ammonium lauryl sulfate one is nonpolar hydrocarbon and other part polar sulfate group.

Due to polarity of sulfate group its form hydrogen bond very easily.

It is mainly used as foaming agent the main reason of its use is very much soluble in water and making hydrogen bond with water.

Answer:

P IBr: 15.454atm

I₂: 0.923 atm

P Br₂: 0.923atm

Explanation:

Basados en la reacción:

I₂(g) + Br₂(g) ⇄ 2 IBr(g)

La constante de equilibrio, Keq, es definida como:

[tex]Keq = \frac{P_{IBr}^2}{P_{I_2}P_{Br_2}}[/tex]

Se cumple la relación de Keq = 280 cuando las presiones están en equilibrio

Usando PV = nRT, la presión inicial de IBr es:

P = nRT / V; 0.500mol*0.082atmL/molK*423.15K / 1.00L = 17.3 atm

Siendo las presiones en equilibrio:

P IBr: 17.3 - 2X

P I₂: X

P Br₂: X

Donde X representa el avance de reacción.

Remplazando en Keq:

280 = (17.3 - 2X)² / X²

280X² = 4X² - 69.2X + 299.29

0 = -276X² - 69.2X + 299.29

Resolviendo para X:

X = -1.174 → Solución falsa. No existen presiones negativas

X = 0.923 → Solución real

Así, las presiones parciales en equilibrio de cada compuesto son:

P IBr: 17.3 - 2X = 15.454atm

P I₂: X = 0.923atm

P Br₂: X = 0.923atm

Answer:

[tex]p_{I_2}=0.926atm\\p_{Br_2}=0.926atm\\p_{IBr}=15.5atm[/tex]

Explanation:

Hello,

In this case, given the initial load of 0.500 mol of IBr in the 1.00-L, we compute its initial concentration:

[tex][IBr]_0=\frac{0.500mol}{1.00L}=0.500M[/tex]

Hence, by knowing the original reaction, we should invert it as IBr will produce iodine and bromine considering the initial load:

[tex]2IBr(g)\rightleftharpoons I_2(g) + Br_2(g)[/tex]

Therefore, the equilibrium constant should be inverted:

[tex]K'=\frac{1}{Keq}=\frac{1}{280}=3.57x10^{-3}[/tex]

So we write the law of mass action:

[tex]K'=\frac{[I_2][Br_2]}{[IBr]^2}[/tex]

That in terms of the change [tex]x[/tex] due to the reaction extent turns out:[tex]3.57x10^{-3}=\frac{(x)(x)}{(0.500-2x)^2}[/tex]

In such a way, solving by using solver or quadratic equation we obtain:

[tex]x_1=-0.0339M\\x_2=0.0267M[/tex]

Clearly, the solution is 0.0267M, thus, the equilibrium concentrations are:

[tex][I_2]=x=0.0267M[/tex]

[tex][Br_2]=x=0.0267M[/tex]

[tex][IBr]=0.5M-2x=0.5M-2*0.0267M=0.447M[/tex]

Thus, with the given temperature (150+273.15=423.15K), we compute the partial pressures by using the ideal gas equation:

[tex]p_{I_2}=[I_2]RT=0.0267\frac{mol}{L} *0.082\frac{atm*L}{mol*K}*423.15K\\\\p_{I_2}=0.926atm\\\\p_{Br_2}=[Br_2]RT=0.0267\frac{mol}{L} *0.082\frac{atm*L}{mol*K}*423.15K\\\\p_{Br_2}=0.926atm\\\\p_{IBr}=[IBr]RT=0.447\frac{mol}{L} *0.082\frac{atm*L}{mol*K}*423.15K\\\\p_{IBr}=15.5atm[/tex]

Best regards.

Answer:A heating curve graphically represents the phase transitions that a substance undergoes as heat is added to it. The plateaus on the curve mark the phase changes. The temperature remains constant during these phase transitions.

Answer:

Explanation:

Each share costs $36000/4500

= $8

800 shares will cost 800*8

= $6400

Find attached the journal

Answer:

c

Explanation:

¨Halogens being non metals have greater electronegativities hence, attract electrons and making the statement disputed. Nobel gases are highly stable; this explains why they are nonreactive. They do not form chemical bonds because they only have a little tendency to either gain or lose an electron; on the other hand, halogens are reactive because they only need one additional electron to complete their octet. ¨

i found that from another users answer for the same question

Answer:

answer c

Explanation:

Answer:

28.69 grams

Explanation:

To find the mass, we first need to find the moles. Once we have the moles, it is easy to use the molar mass of H2SO4 to find its mass.

To find the moles, remember that molarity (M) is equal to the moles divided by the volume (L). The volume HAS TO be converted to liters!

M = moles / V

5.85 M = moles / 0.05 L

moles = 0.2925

Now we know that we have 0.2925 moles of sulfuric acid. The molar mass of sulfuric acid is 98.08 g/mol.

0.2925 moles * (98.08 g / mol) = 28.69 grams

Make sense? If you have any questions, don't hesitate to ask!

Answer:

hypothalamus

Explanation:

Answer:

2L

Explanation:

We'll begin by writing the balanced equation for the reaction this is illustrated below:

2H2 + O2 —> 2H2O

1 mole of a gas occupy 22.4L.

1 mole of O2 occupy 22.4L.

2 moles of H2O occupy = 2 x 22.4 = 44.8L.

From the balanced equation above,

22.4L of O2 produced 44.8L of H2O.

Therefore, 1L of O2 will produce = 44.8/22.4 = 2L.

Therefore, 1L of O2 will produce 2L of H2O.

Answer:

the liver

Explanation:

it processes alcohol, work very hard

Answer:

pH test strips will lose colour and their pH sensitivity as strips are made from universal indicator. Universal indicator is composed of phenolphthalein, methyl red, methyl orange and thymol blue.

Explanation:

pH test strips are made from the universal indicator. The universal indicator is composed of phenolphthalein, methyl red, methyl orange, and thymol blue. All of these will react with chlorine in bleach. As a result, they will lose color and pH sensitivity. Due to this, it is difficult to determine the pH of bleach using ph strips.

Answer:

An organ

Explanation:

An organ is one or more tissues that work together to form a specific function.

- Hope that helps! Please let me know if you need further explanation.