Answer:
Explanation:
mass and distance
A car generator turns at 400 rpm (revolutions per minute) when the engine is idling. It has a rectangular coil with 300 turns of dimensions 5.00 cm by 6.46 cm that rotates in an adjustable magnetic field. What is the field strength needed to produce a 24.0 V peak emf
Answer:
The field strength needed to produce a 24.0 V peak emf is 0.5913 T
Explanation:
From the formula for maximum emf of a generator,
[tex]emf_{max}= NAB\omega[/tex]
∴ [tex]B = \frac{emf_{max} }{NA\omega}[/tex]
Where N is the number of loops
A is cross section of loops
B is magnetic field strength
ω is the angular frequency of loops
From the question, [tex]emf_{max} = 24.0V[/tex]
N = 300 turns
A = l × b ( since it is a rectangular coil)
A = 6.46 cm × 5.00 cm
A = 0.0646 m × 0.05 m
A = 0.00323 m²
ω = 400 rpm = (400/60)×2π rad/s
ω = 41.8879 rad/s
Putting all the parameters into the formula
[tex]B = \frac{emf_{max} }{NA\omega}[/tex]
[tex]B = \frac{24.0}{300\times0.00323\times41.8879}[/tex]
[tex]B = 0.5913T[/tex]
Hence, the field strength needed to produce a 24.0 V peak emf is 0.5913 T
a man does 1500 J of work to pull a box of 150 N. what is the displacement of the box?
We know
[tex]\boxed{\sf Work\:Done=Force\times Displacement}[/tex]
[tex]\\ \sf\longmapsto 1500=150\times Displacement[/tex]
[tex]\\ \sf\longmapsto Displacement=\dfrac{1500}{150}[/tex]
[tex]\\ \sf\longmapsto Displacement=10m[/tex]
A uniform bridge span of weight 1200 kN and of
length 17.0 m rests on a support of width 1.0 m at
either end. A stationary lorry of weight 60 kN is the
only object on the bridge. Its centre of mass is 3.0m
from the centre of the bridge.
15.0 m
Non-ideal behavior for a gas is most likely to be observed under conditions of a) high pressure and low temperature. b) high temperature and high pressure. c) high temperature and low pressure. d) standard temperature and pressure. e) low temperature and low pressure.
Answer:
high temperature and low pressure
Explanation:
Real gases have intermolecular forces of attraction between them hence they can be liquified. However, gases approach ideal behavior at high temperature and low pressure.
According to the kinetic theory of gases, gases molecules move at incredibly high speeds and exhibit no intermolecular interaction because the gas molecules are isolated from each other.
At high temperature and low pressure, gas molecules are found to possess maximum kinetic energy. They move with a very high velocity and have minimal intermolecular interaction between them in accordance with the proposition of the kinetic theory of gases.
A ball is thrown vertically upward.It's velocity at the highest point is?
A. 10 ms^-1
B. Zero
C. 10 ms^-2
D. None of these
B
Explanation:
BECAUSE IT WAS GOING UPWORD THEN IT'S VELOCITY WAS DECREASING -10MS¹
Answer:
Explanation:
From physics, which is directly related to math (especially when it comes to parabolic motion!), we learn that at the very top of the parabola the object has to stop for a millisecond so it can turn around and fall back to earth. This translates to a velocity of 0 at its highest point. So B.
A car covers a distace of 20km in 20 seconds. Calculate its speed in km/h m/s.
Answer:
speed = 3600 kilometers per hour
= 3600 km/h
speed = 1000 meters per second
= 1000 m/s
Answer From Gauth Math
any correct ans guess for 30 pts and brainlist
Answer:
a) ii
b) i
c)iii
d)iii
e) i
f)iii
Explanation:
i hope this will help
Answer:
the answer of b is N and d is mol
A force of 100 N stretches a spring by 5cm. Calculate the work done.
Answer:
Work done is 5 J
Explanation:
Workdone = Force × distance
[tex]{ \sf{W = 100 \times (5 \times {10}^{ - 2}) }} \\ { \sf{W = 5 \: joules}}[/tex]
Which of the following is a contact force?
A. applied
B. electromagnetic
C. nuclear
D. gravity
applied force is a contact force
The force exerted by the earth on a body is called ______of a body.
Answer:
The force exerted by the earth on a body is called gravitational of a body.
i think this is the answer
Answer:weight
Explanation:
1. explain the procedure undertaken if you have to measure the density of the contents of a milk carton. 2. two objects have the same mass. How about the density of the two objects?
To calculate the density of a substance, its mass and volume has to be determined. So that:
i. For the milk in the carton, its mass and volume should be known.
ii. For the two objects given in the question, their individual masses and volumes have to be determined.
Density of a substance (ρ) is the rate of the mass (m) of the substance to its volume (V). It is measure in kg/[tex]m^{3}[/tex].
i.e ρ = [tex]\frac{m}{V}[/tex]
The density of a substance can be determined once the mass and its volume have been accurately measured.
1. How to measure the density of the contents of a milk carton.
a. Determine the mass of the milk carton with its content.
b. Determine the mass of the milk carton when empty.
c. Subtract the mass of the milk carton when empty from the mass of the carton with its content. This will give the mass of the milk in the carton.
d. Using a beaker, measure the volume of the milk.
e. Divide the mass of the milk by its volume to determine its density.
2. How to measure the densities of two objects of equal mass.
a. Fill an Eureka's can or a beaker with sprout with water to its brim.
b. Slowly drop the mass into the beaker with water so as to collect the volume of the liquid displaced into another beaker.
c. The volume of the liquid displaced is the volume of the mass.
d. Divide the mass of the object by its volume to determine its density.
NB: These procedures are observed to determine the densities of the two object individually.
For more explanations, visit: https://brainly.com/question/17924956
Which nucleus completes the following equation?
Please ignore the answer I chose, it might be wrong
Answer:
D. [tex]^{39}_{18} Ar[/tex]
Explanation:
The given nuclear equation is the beta decay of chorine in which an electron, known as a beta particle, is given off from within the nucleus due to the breakdown of a neutron within the nucleus into a proton and a beta particle, such that the atomic number is increased by 1 from 17 to 18, which is the atomic number or argon, Ar, as follows;
[tex]^{39}_{17}Cl \ \rightarrow \ ^0_{-1} e + \ ^{39}_{18} Ar[/tex]
The moving bicycle moves for sometime even after stopping the paddling.why
Answer:
when you are paddling the push carry on when you paddle the hard put on the push.
Answer:
Because of inertia
Explanation:
As stated in Newton first law "An object at rest will stay at rest, an object in motion will stay in motion unless it is acted upon by a force."
For an example:
If you have a drink without a lid in a car and a car suddently the car stop, u will automatically try to catch the drink preventing it from spilling. This is because that the drink that was in motion with the car want to stay in motion, but when the car stop, the drink still wanna be in motion, that's why it will be flying off and spill if u don't catch it.
Back to the question:
if a bicyccle is in motion, it will wants to be in motion untill a force act upon it, let's say a bump or fricition.
hope this help. give me the brainliest if u can.
The mass of earth 6*10^24kg and radius is 400kg Now find the value of acceleration due to gravity when a object is 3600km from the earth surface
What is meant by the term wave front?
Explanation:
Wave front, imaginary surface representing corresponding points of a wave that vibrate in unison. ... Wave fronts for longitudinal and transverse waves may be surfaces of any configuration depending on the source, the medium, and the obstructions encountered.
Density of an object can be found by calculating mass divided by volume. If two objects have the same mass, but one has a greater volume, the object with more volume is less dense. Does water’s density change when it is frozen?
Answer:
yes, the density of ice is less than the density of water. Ice floats on water.
Explanation:
how is one standard kilogram defined in SI system?
Answer:
One standard kilogram is define as the mass of platinium iridium cylinder having equal diameter and height kept at the particular condition of international bureo of weigh and measure sevre near paris.
Which type of wires (copper, aluminum, or string) are ferromagnetic metals?
Answer:
Copper isn't ferromagnetic,
Aluminum isn't ferromagnetic,
String has a ferromagnetic property
So in conclusion:
The answer is strings :)
What is the difference between gross anatomy and microscopic anatomy?
Answer:
The gross (or macroscopic) anatomy: The study of anatomical features visible to the naked eye, such as internal organs and external features.
The microscopic anatomy: The study of minute anatomical structures on a microscopic scale, including cells (cytology) and tissues (histology).
give scientific reasons when the body falls freely to the ground its motion as the uniform acceleration
Answer:
When an object falls freely to the ground, its acceleration is uniform. Hint: When an object falls freely on the ground, the force of the gravity works on it. So the acceleration on the object is the acceleration due to gravity. So the acceleration is uniform on the freely falling body.
Quien fue el físico platon
Answer:
Platón se cree que nació entre los años 428-427 a.C. en Atenas o Egina. Murió en Atenas sobre el año 347 a.C. Filósofo griego, Platón fue discípulo de Sócrates y maestro de Aristóteles. Fue, además, el fundador de la escuela filosófica La Academia de Atenas.
Which is the formula that describes the magnitude of an object's kinetic energy? A. kinetic energy = mass * (velocity)2 x 0.5
B. kinetic energy = mass x acceleration C. kinetic energy = mass x change in velocity
D. kinetic energy = mass x velocity
Answer:
A
kinetic energy=(mv²)/2
(1/2)(mv²)
(mv²)*0.5
where m=mass and v=velocity/speed
What is the most accurate and precise method to measure the thickness of a coin?
Answer:
The most accurate and precise method to measure the thickness of a coin would be by a micrometer screw guage.
The most accurate and precise method to measure the thickness of a coin is with the help of a screw gauge.
What is a unit of measurement?
A unit of measurement is a specified magnitude of a quantity that is established and used as a standard for measuring other quantities of the same kind.
It is determined by convention or regulation.
Any additional quantity of that type can be stated as a multiple of the measurement unit.
The smallest length that a screw gauge can measure is called its least count.
Thus, if we have to measure the thickness of a coin using a screw gauge to measure a coin is the most exact and precise approach available.
Learn more about the unit of measurement here, refer to the link given below;
brainly.com/question/12629581
#SPJ2
3) All numbers that are divisible by both 3 and 5 are also divisible by 10. Which of the following numbers can be used to show that the statement above is FALSE? (A) 20 (B) 25 (C) 30 (D) 40 (E) 45
Answer:
answer E
Explanation:
cuz its 45 is divisible by 3 and 5 but not 10
What is not one of the main uses of springs?
A. Bike suspension
B. The seasons
C. Clock making
D. Car suspension
Quick answer
Answer:
b. the seasons
Explanation:
Annie has a soccer ball and a cake ball she kicks each ball with the same Force the soccer ball accelerates at 3 m per second squared and the kickball accelerates at 5 m per second squared use Newton's law to describe why the kickball has a greater acceleration
what is metel and non metel ?
Answer:
Metals (like copper and aluminium) are good conductors of heat and electricity, while nonmetals (such as phosphorus and sulfur) are insulators.
Explanation:
i don't really have one i just know
Answer:
1 of them is metel and one is not
Explanation:
the force between the earth and the body which is at a distance r from the center of the earth is F. What must be this distance for the force to be doubled.
Answer:
Explanation:
The gravitational force between the earth and another body is F = -GM_em/r^2 r where G = 6.67 times 10^-11 Nm^2/kg^2 is the gravitational constant, M_e = 5.97 times 10^24 kg is the mass of the earth, m is the mass of the other body, and r is the position vector of the second body with respect to the centre of the earth.
V = ?
d= 15 m left
t = 5 s
What is the velocity?
Answer:
Velocity= 3[tex]ms^{-1}[/tex]
Explanation:
Formula to find velocity = Displacement/time taken
therefore, velocity= 15/5 ➤ Velocity = 3 [tex]ms^{-1}[/tex]
How can you distinguish wave motion and particle motion?
Answer:
The particle is defined as the small quantity of matter under the consideration. ... The wave is defined as the propagating dynamic distrubance. The energy of the wave is calculated based on the wavelength and velocity
I HOPE THIS WILL HELP YOU IF NOT THEN SORRY :)Explanation:
In Physics, we distinguish between wave motion and particle motion. Wave motion refers to the movement of a wave-like pattern from one location on the medium to another. ... When you observe the motion of these points, you are observing particle motion - the motion of particles of the rope.
