The highest acceptable manufacturing cost for whitmore to produce the mugs would be approximately $43.
to determine the highest acceptable manufacturing cost for which whitmore would be willing to produce the mugs, we need to calculate the target operating profit and subtract it from the desired selling price.
1. calculate the target operating profit:
the target operating profit is 30% of the costs. we'll assume this refers to the cost of manufacturing the mugs.
target operating profit = 30% of costs
2. calculate the desired selling price:
the desired selling price is given as $26.
3. calculate the highest acceptable manufacturing cost:
to find the highest acceptable manufacturing cost, we'll subtract the target operating profit from the desired selling price.
highest acceptable manufacturing cost = desired selling price - target operating profit
let's calculate the highest acceptable manufacturing cost:
target operating profit = 30% of costs
desired selling price = $26
30% of costs = $26 - target operating profit
0.3 * costs = $26 - target operating profit
0.3 * costs = $26 - (0.3 * costs)
0.3 * costs + 0.3 * costs = $26
0.6 * costs = $26
costs = $26 / 0.6
the highest acceptable manufacturing cost for whitmore would be:
costs = $26 / 0.6 ≈ $43.33 33.
Learn more about manufacturing here:
https://brainly.com/question/13439850
#SPJ11
Intertemporal budget constraint. Budget line 1: Y₁ = $900. Y₂ = $600. The interest rate is 12 percent, both for borrowing and saving. Utility = C₁⁵C₂⁷ Draw the budget line, with solved numbers. Solve the optimal consumption levels to choose in time 1 and time 2.
The maximum utility that can be derived from these consumption levels is U = C1^5C2^7 = $411.42^5 x $517.14^7 = $20,961,636.18. Intertemporal budget constraint refers to the consumer's budget constraint over time. The budget line shows the quantity of goods that can be purchased with the amount of income available.
It describes the maximum amount of consumption in the present and future, given the current income and interest rate. Hence, the formula for the budget line is: C1 + C2/ (1+r) = Y1/ (1+r) + Y2. Where C1 and C2 are the present and future consumption, r is the interest rate, and Y1 and Y2 are present and future incomes. The consumer's intertemporal budget constraint is based on the consumption and investment possibilities available in different periods. Utility is the satisfaction or happiness derived by the consumer from consuming goods.
Mathematically, the utility function can be defined as U = C1^5C2^7, where C1 and C2 are the consumption levels in period 1 and 2, respectively. To maximize utility, the consumer must allocate income between present and future consumption. In this problem, the budget line is: C1 + C2/ (1+12%) = $900/ (1+12%) + $600. Simplifying, C1 + C2/ 1.12 = $803.57. The optimal consumption levels can be found by maximizing the utility function subject to the budget constraint. The Lagrangian function is: L = C1^5C2^7 - λ(C1 + C2/ 1.12 - $803.57). Taking the partial derivatives with respect to C1, C2, and λ, we get: ∂L/∂C1 = 5C1^4C2^7 - λ = 0 ∂L/∂C2 = 7C1^5C2^6 - λ/1.12 = 0 ∂L/∂λ = C1 + C2/ 1.12 - $803.57 = 0 Solving the above equations, we get: C1 = $411.42 and C2 = $517.14. Therefore, the optimal consumption levels to choose in time 1 and time 2 are $411.42 and $517.14, respectively. The maximum utility that can be derived from these consumption levels is U = C1^5C2^7 = $411.42^5 x $517.14^7 = $20,961,636.18.
To know more about Intertemporal budget click here:
https://brainly.com/question/17309377
#SPJ11
Hello I need financial plan for new coffee shop
what will be the start up budget
project income statement
project balance sheet
cash folow forecast
To create a financial plan for a new coffee shop, you will need to consider various factors such as startup costs, projected income statement, projected balance sheet, and cash flow forecast. Here's a general outline to help you get started:
1. Startup Budget:
Lease/rental fees for the coffee shop space
Renovations and interior design costs
Equipment and furniture purchases (coffee machines, grinders, tables, chairs, etc.)
Inventory and supplies (coffee beans, milk, syrups, cups, napkins, etc.)
Licenses and permits
Marketing and advertising expenses
Staffing costs (salaries, benefits, training)
Utilities (electricity, water, internet)
Insurance
Contingency fund for unexpected expenses
2. Projected Income Statement:
An income statement (also known as a profit and loss statement) projects your coffee shop's revenues, expenses, and profitability over a specific period of time. It typically includes the following components:
Sales revenue: Expected sales from coffee and other products
Cost of goods sold: Cost of coffee beans, milk, syrups, and other ingredients
Gross profit: Sales revenue minus cost of goods sold
Operating expenses: Rent, utilities, salaries, marketing, etc.
Net profit: Gross profit minus operating expenses
3. Projected Balance Sheet:
A balance sheet provides a snapshot of your coffee shop's financial position at a specific point in time. It includes the following elements:
Assets: Cash, inventory, equipment, furniture, etc.
Liabilities: Loans, accounts payable, accrued expenses, etc.
Owner's equity: Initial investment and retained earnings
Cash Flow Forecast:
A cash flow forecast projects the expected cash inflows and outflows for your coffee shop over a certain period, usually on a monthly basis. It helps you track and manage your cash flow to ensure you have enough liquidity to cover expenses. It includes:
4. Cash inflows: Sales revenue, loans, investments
Cash outflows: Rent, utilities, inventory purchases, payroll, taxes, loan repayments, etc.
Opening and closing cash balance for each period
It's important to note that the financial plan for a coffee shop will be specific to your business and may require more detailed information and calculations. Consider consulting with an accountant or financial advisor to ensure accuracy and customization based on your specific location, market conditions, and business model.
Learn more about income statement here
https://brainly.com/question/30169587
#SPJ11
To create a financial plan for a new coffee shop, you will need to consider various factors such as startup costs, projected income statement, projected balance sheet, and cash flow forecast. Here's a general outline to help you get started:
1. Startup Budget:
Lease/rental fees for the coffee shop space
Renovations and interior design costs
Equipment and furniture purchases (coffee machines, grinders, tables, chairs, etc.)
Inventory and supplies (coffee beans, milk, syrups, cups, napkins, etc.)
Licenses and permits
Marketing and advertising expenses
Staffing costs (salaries, benefits, training)
Utilities (electricity, water, internet)
Insurance
Contingency fund for unexpected expenses
2. Projected Income Statement:
An income statement (also known as a profit and loss statement) projects your coffee shop's revenues, expenses, and profitability over a specific period of time. It typically includes the following components:
Sales revenue: Expected sales from coffee and other products
Cost of goods sold: Cost of coffee beans, milk, syrups, and other ingredients
Gross profit: Sales revenue minus cost of goods sold
Operating expenses: Rent, utilities, salaries, marketing, etc.
Net profit: Gross profit minus operating expenses
3. Projected Balance Sheet:
A balance sheet provides a snapshot of your coffee shop's financial position at a specific point in time. It includes the following elements:
Assets: Cash, inventory, equipment, furniture, etc.
Liabilities: Loans, accounts payable, accrued expenses, etc.
Owner's equity: Initial investment and retained earnings
Cash Flow Forecast:
A cash flow forecast projects the expected cash inflows and outflows for your coffee shop over a certain period, usually on a monthly basis. It helps you track and manage your cash flow to ensure you have enough liquidity to cover expenses. It includes:
4. Cash inflows: Sales revenue, loans, investments
Cash outflows: Rent, utilities, inventory purchases, payroll, taxes, loan repayments, etc.
Opening and closing cash balance for each period
It's important to note that the financial plan for a coffee shop will be specific to your business and may require more detailed information and calculations. Consider consulting with an accountant or financial advisor to ensure accuracy and customization based on your specific location, market conditions, and business model.
Learn more about income statement here
brainly.com/question/30169587
#SPJ11
Which single attribute criterion are you most familiar with and why? One thing you may have noticed when learning about these criteria is that there's no centralized database (that I know of) where you can filter to find materials that satisfy these single-attribute criteria. But there are certain databases that I didn't list and may not know about
Among the single attribute criteria, the most familiar one is not having a centralized database for filtering materials that satisfy these criteria.
While exploring the single attribute criteria, one notable observation is the absence of a centralized database specifically designed for filtering materials that meet these criteria. As far as my knowledge extends, there isn't a known database that allows for easy filtering based on single attribute criteria.
However, it is worth noting that there could be other databases or resources available that I might not be aware of or have not listed. It is always recommended to conduct thorough research and explore various platforms, libraries, or specialized databases related to the specific attributes or criteria one is seeking.
To learn more about database click here, brainly.com/question/6447559
#SPJ11
Technical training has become increasingly important because of changes in organizational design.
Indicate whether the statement is true or false.
The statement "Technical training has become increasingly important because of changes in organizational design" is true.
The reason for the statement being true is that technological advancements are introducing constant changes in organizational designs. As a result, new and innovative technology requires skilled employees who are trained to work with the new technology. Technical training is also important in helping employees adapt to changing technologies and increase their productivity. Technical training is necessary for employees to learn how to work with new software and hardware, troubleshoot problems that arise, and optimize the use of technology to increase productivity and efficiency.
Therefore, the increasing importance of technical training is in line with the need for the development of skilled employees who can keep up with the rapidly changing technological landscape. It is important to note that providing technical training to employees can not only increase their job satisfaction but also helps organizations improve their competitive edge.
know more about Technical training
https://brainly.com/question/32630576
#SPJ11
Question Five ( 7 Marks ) The following information is budgeted for McCracken Plumbing Supply Company for next quarter : April May June
Sales.....$ 110,000 $ 130,000 $ 180,000
Merchandise purchases.....$ 85,000 $ 92,000 $ 105,000
Selling and administrative expenses ..... $ 50,000b $ 50,000 $ 50,000
All sales at McCracken are on credit . Forty percent are collected in the month of sale , 58 % in the month following the sale , and the remaining 2 % are uncollectible . Merchandise purchases are paid in full the month following the month of purchase . The selling and administrative expenses above include $ 8,000 of depreciation on display fixtures and warehouse equipment . All other selling and administrative expenses are paid as incurred . McCracken wants to maintain a cash balance of $ 15,000 . Any amount below this can be borrowed from a local bank as needed in increments of $ 1,000 . All borrowings are made at month end . Required : Prepare McCracken's cash budget for the month of May . Use good form . McCracken expects to have $ 24,000 of cash on hand at the beginning of May
McCracken Plumbing Supply Company's cash budget for the month of May shows an ending cash balance of $8,400, indicating a need to borrow $6,600 to maintain the desired cash balance.
To prepare McCracken Plumbing Supply Company's cash budget for the month of May, we need to consider the cash inflows and outflows based on the given information. Here's the calculation:
Beginning cash balance (May): $24,000
Cash inflows:
Sales collected in May (40% of April sales): $110,000 * 40% = $44,000
Sales collected in May (58% of May sales): $130,000 * 58% = $75,400
Total cash inflows: $44,000 + $75,400 = $119,400
Cash outflows:
Merchandise purchases paid in May (April purchases): $85,000
Selling and administrative expenses (including depreciation): $50,000
Total cash outflows: $85,000 + $50,000 = $135,000
Net cash flow: Cash inflows - Cash outflows
Net cash flow: $119,400 - $135,000 = -$15,600
Ending cash balance (May): Beginning cash balance + Net cash flow
Ending cash balance: $24,000 - $15,600 = $8,400
Learn more about cash balance here:
https://brainly.com/question/28388417
#SPJ11
Using the returns shown, calculate the arithmetic average returns, the variances, and the standard deviations for X and Y. Year 1: x=15%, y=20%; Year 2: X=18%, y=30%; Year 3: X= -9, y= - 16; Year 4: X=10% and Y=15%. I have answers and EXCEL chart done if you need.
My average returns for X are 8.6% and for Y 13.8%.
My Standard deviations are correct for X at 10.50 and for Y at 17.53.
My variances are INCORRECT. X = 110.300000 an for Y 307.20000 (5 places required)
Thanks. I am desperate. I do not know what I am doing wrong.
I can send Excel document.
Thanks.
Carol
The arithmetic average returns are 8.5% for X and 12.25% for Y. The variances are 110.25 for X and 307.5625 for Y. The standard deviations are 10.5066 for X and 17.5349 for Y.
Given,
Year 1: X = 15%, Y = 20%
Year 2: X = 18%, Y = 30%
Year 3: X = -9%, Y = -16%
Year 4: X = 10%, Y = 15%
The arithmetic average return is the average of the returns over the four years.
For X, the average return is (15% + 18% - 9% + 10%) / 4 = 8.5%.
For Y, the average return is (20% + 30% - 16% + 15%) / 4 = 12.25%.
The variance is a measure of the dispersion or spread of the returns. It quantifies the variability of the returns around the average.
For X, the variance = [tex]\frac{(15 - 8.5)^2 + (18 - 8.5)^2 + (-9 - 8.5)^2 + (10 - 8.5)^2}{4}[/tex]
= 110.25.
For Y, the variance = [tex]\frac{(20 - 12.25)^2 + (30 - 12.25)^2 + (-16 - 12.25)^2 + (15 - 12.25)^2}{ 4}[/tex]
= 307.5625.
The standard deviation is the square root of the variance and provides a measure of the volatility or risk associated with the returns.
For X, the standard deviation = [tex]\sqrt{110.25[/tex]
= 10.5066
For Y, the standard deviation = [tex]\sqrt{307.5625[/tex]
= 17.5349
Learn more about standard deviation, here:
https://brainly.com/question/29115611
#SPJ4
Beta Breads can produce and sell only one of the following two products:
Oven Contribution
Hours Required Margin Per Unit
Muffins 0.3 $3.50
Croissants 0.4 $4.75
The company has oven capacity of 1,200 hours. How much will contribution margin be if it produces only the most profitable product?
$14,004
$14,250
$22,500
$2,280
If Beta Breads produces only the most profitable product, which is the one with the higher contribution margin per unit, the contribution margin can be calculated as follows:
Contribution Margin = Margin Per Unit * Units Produced
To determine the units produced, we need to consider the oven capacity and the hours required for each product:
Muffins: 0.3 hours per unit
Croissants: 0.4 hours per unit
Since the oven capacity is 1,200 hours, we need to determine which product can be produced within this time limit.
For Muffins:
Units of Muffins = 1,200 hours / 0.3 hours per unit = 4,000 units
For Croissants:
Units of Croissants = 1,200 hours / 0.4 hours per unit = 3,000 units
Since Muffins have the higher contribution margin per unit ($3.50), we will produce only Muffins. Therefore, the contribution margin will be:
Contribution Margin = $3.50 * 4,000 units = $14,000
The closest option to this result is $14,004. Hence, the correct answer is $14,004.
Learn more about product here:
brainly.com/question/14057226
#SPJ11
Which of the following statements is characteristic of utilitarian thought? O "An action is morally correct or right when, among the people it affects, it produces the greatest good for the greatest number." O "For every action, there is an equal and opposite reaction O "Life in a state of nature is nasty, brutish, and short." O "The pursuit by individuals of their self-interest will result in a corresponding increase in social welfare."
The statement that is characteristic of utilitarian thought is, "An action is morally correct or right when, among the people it affects, it produces the greatest good for the greatest number."
Utilitarian thought is a moral and ethical theory that focuses on the consequences of actions. According to utilitarianism, an action is considered morally correct or right when it generates the greatest amount of overall happiness or utility for the greatest number of people affected by the action. This principle is often summarized as "the greatest good for the greatest number."
Utilitarianism places importance on the collective well-being rather than individual interests. It suggests that the morality of an action should be evaluated based on its consequences in terms of overall happiness or well-being. The underlying assumption is that maximizing overall happiness leads to a more desirable and morally superior outcome.
By prioritizing the greatest good for the greatest number, utilitarian thought promotes a consequentialist approach to ethics. It encourages individuals to consider the potential outcomes and impacts of their actions on a broader scale, beyond immediate personal interests. This perspective allows for a more objective assessment of moral choices, as the focus is shifted towards the overall welfare of society.
Learn more about Characteristic of utilitarian
brainly.com/question/471708
#SPJ11
Which of the following is a control activity in relation to completeness?
a. The accountant compares the amount in the advertising invoice with the advertising quotation
b. The accountant inspects areas where repair costs have been invoiced to ensure repairs have been carried out.
c. The accountant reviews whether invoices have been received and processed for all building repairs purchase orders.
d. The accountant reviews newspapers to see that purchased advertisements appear as expected.
Among the given options, the control activity that relates to completeness is option C, where the accountant reviews whether invoices have been received and processed for all building repairs purchase orders.
Control activities are measures taken by an organization to ensure the reliability and integrity of its financial reporting. In relation to completeness, control activities aim to ensure that all transactions and events are recorded and included in the financial statements.
Option C aligns with this objective as the accountant reviews whether invoices have been received and processed for all building repairs purchase orders. By verifying the presence of invoices for all relevant purchase orders, this control activity helps ensure that all expenses related to building repairs are properly recorded and included in the financial statements.
This review is essential to prevent the omission of any expenses, which could lead to incomplete financial reporting. By conducting this control activity, the organization can enhance the accuracy and completeness of its financial records.
Learn more about financial statements here:
https://brainly.com/question/30355441
#SPJ11
A collection of securities is called a: portfolio. conglomerate. basket. Any of these choices are correct A company can raise money to purchase assets by: using money earned. borrowing money (issuing bonds). issuing stock. issuing bonds \& stock. all of the above.
A collection of securities is called a portfolio. A company can raise money to purchase assets by using money earned, borrowing money, and issuing stock. Therefore, the correct answer is "all of the above."
A collection of securities, such as stocks, bonds, and other financial instruments, held by an individual or an institution, is referred to as a portfolio. This term is commonly used in the field of finance to describe the collection of investments or assets owned by an investor or a financial institution.
When a company needs to raise money to purchase assets or fund its operations, it has several options. Firstly, the company can use its own funds generated from its operations, also known as retained earnings or money earned. This can come from the profits generated by the company's business activities.
Secondly, the company can borrow money by issuing bonds. Bonds are debt instruments through which companies or governments borrow money from investors with a promise to repay the principal amount along with interest over a specified period.
Thirdly, the company can raise money by issuing stock, which represents ownership in the company. By selling shares of stock, the company can raise capital from investors who become shareholders and have a stake in the company's ownership and future profits.
In some cases, companies may choose to utilize a combination of these methods, issuing both bonds and stock to raise the necessary funds for their operations or acquisitions.
Therefore, the correct answer is that a company can raise money to purchase assets by using money earned, borrowing money (issuing bonds), and issuing stock.
Learn more about portfolio here:
https://brainly.com/question/17165367
#SPJ11
The Green Grass Shop sells Quick Grow Fertilizer. The annual demand for the fertilizer is 270,000 pounds. The cost to order the fertilizer from Green Grass Shop is $105 per order. The annual carrying cost is $0.25 per pound. The store operates with shortages, and the annual shortage cost is $0.70 per pound. Compute the optimal order size, minimum total annual inventory cost, and maximum shortage level.
OPTIMAL ORDER SIZE=
MINIMUM TOTAL ANNUAL INVENTORY COST=
MAXIMUM SHORTAGE LEVEL=
The optimal order size, minimum total annual inventory cost, and maximum shortage levelThe economic order quantity (EOQ) is used to determine the optimal order quantity, which minimizes the total annual inventory cost.
The EOQ formula is:Economic order quantity (EOQ) = sqrt([2SD]/H)where:S = Annual demandD = Cost to orderH = Annual carrying cost per unitThe annual demand for the Quick Grow Fertilizer is 270,000 pounds, and the cost to order it from Green Grass Shop is $105 per order. The annual carrying cost is $0.25 per pound. Using the above formula, the EOQ is:EOQ = sqrt([2 x 270,000 x 105]/0.25) = 3,675.72 poundsThe optimal order size is 3,675.72 pounds.The minimum total annual inventory cost can be calculated using the EOQ and the following formula:Minimum Total Annual Inventory Cost = [Q/2]H + [D/Q]Swhere:Q = Optimal order sizeH = Annual carrying cost per unitD = Cost to orderS = Annual demandMinimum Total Annual Inventory Cost = [(3,675.72/2) x 0.25] + [105/3,675.72 x 270,000] = $2,790.63The maximum shortage level can be determined using the following formula:Maximum Shortage Level = (D/Q) x (1 - [S/A])where:A = Annual demandMaximum Shortage Level = (105/3,675.72) x (1 - [270,000/270,000]) = 0 pounds (since there is no shortage allowed)Thus, the optimal order size is 3,675.72 pounds, the minimum total annual inventory cost is $2,790.63, and the maximum shortage level is 0 pounds.
For more question inventory cost
https://brainly.com/question/29481691
#SPJ8
Greg Morrison recently graduated from construction engineering school. He is considering opening his own construction business providing module housing. Providing module homes is a high-fixed cost business, as it requires considerable expenditures for facilities, labor, and equipment, no matter how many families are served. Assume the annual fixed cost of operations is $800,000. Further assume that the only significant variable cost relates to the module homes, themselves. An average module home costs $12,000. Greg's banker has asked a variety of questions in contemplation of providing a loan for this business:
(a) If the average family is charged $18,000 for installation of a module home, how many families must be served to clear the break-even point?
(b) If the banker believes Greg will only serve 100 families during the first year in business, how much will the business lose during its first year of operation?
(c) If Greg believes his profits will be at least $100,000 during the first year, how much is he anticipating for total revenue?
(d) The banker has suggested that Greg can reduce his fixed costs by $150,000 if he will not buy any vehicles. Greg can instead rent vehicles as needed. The variable cost of renting is $700 per family served. Will this suggestion help Greg reach the break-even point sooner?
We must compute the number of families that must be serviced in order to cover the fixed costs in order to estimate the break-even threshold. Fixed costs / Contribution margin per family = Break-even point (in terms of the number of families).
The difference between the selling price and the variable cost per family is the contribution margin per family. Cost of a typical module home is $12,000 Selling price is $18,000 for each family. Variable cost per family equals $18,000 minus $12,000, or $6,000 in contribution margin per family. Break-even point is equal to 800,000/6,000, or 133.33 families. Greg would need to serve at least 134 families to break even because you cannot have a quarter of a family. If the banker thinks Greg will only serve 100 customers.
Learn more about Fixed costs here:
https://brainly.com/question/30057573
#SPJ11
The directors of Onno Ltd have appointed you as a merger and acquisition specialist. They are considering the acquisition of Otto Ltd. You are to advise them whether or not to proceed with the project. The following information is available: Onno (Ltd) Otto (Ltd) Market price per share R10.00 R8.00 Earnings per share R3.00 R2.40 No. of shares issued 2 million 0.5 million Cash payment to Otto Ltd = R12 million. Synergy benefits of R10 million will accrue through the acquisition. Otto Ltd have just had their assets re-valued and the valuation has appreciated quite significantly
Required:
Calculate the post-acquisition increase/decrease price of the share (2)
Assume the acquisition is based on earnings per share:
Calculate the exchange ratio based on earnings per share (3)
Calculate the total number of shares in the proposed acquisition (2)
Calculate the post-acquisition earnings per share (4)
Based on the provided information, the post-acquisition increase/decrease price of the share is R9.25. The exchange ratio based on earnings per share is 0.8.
To calculate the post-acquisition increase/decrease price of the share, we need to consider the cash payment to Otto Ltd and the synergy benefits. The total cost of acquisition is R12 million (cash payment to Otto Ltd) + R10 million (synergy benefits) = R22 million. The total number of shares after the acquisition is 2 million (Onno Ltd) + 0.5 million (Otto Ltd) = 2.5 million shares. Dividing the total cost of acquisition by the total number of shares gives us the post-acquisition increase/decrease price of the share: R22 million / 2.5 million shares = R9.25.
To calculate the exchange ratio based on earnings per share, we compare the earnings per share of Onno Ltd and Otto Ltd. Onno Ltd's earnings per share is R3.00, while Otto Ltd's earnings per share is R2.40. Dividing the earnings per share of Onno Ltd by the earnings per share of Otto Ltd gives us the exchange ratio: R3.00 / R2.40 = 0.8.
The total number of shares in the proposed acquisition is the sum of the shares of Onno Ltd and Otto Ltd, which is 2 million + 0.5 million = 2.5 million shares.
To calculate the post-acquisition earnings per share, we divide the total earnings (sum of Onno Ltd's earnings and Otto Ltd's earnings) by the total number of shares after the acquisition. Onno Ltd's earnings are R3.00 per share, and Otto Ltd's earnings are R2.40 per share. The total earnings is R3.00 (Onno Ltd's earnings per share) * 2 million (Onno Ltd's shares) + R2.40 (Otto Ltd's earnings per share) * 0.5 million (Otto Ltd's shares) = R6 million + R1.2 million = R7.2 million. Dividing the total earnings by the total number of shares (2.5 million) gives us the post-acquisition earnings per share: R7.2 million / 2.5 million shares = R2.44.
Learn more about exchange ratio here:
https://brainly.com/question/30623476
#SPJ11
Speedy Oil provides a single-server automobile oil change and lubrication service. Customers provide an arrival rate of 2.1 cars per hour. The service rate is 3.3 cars per hour. Assume that arrivals follow a Poisson probability distribution and that service times follow an exponential probability distribution. (Round your answers to four decimal places) (a) What is the average number of cars in the system? (b) What is the average time (in hours) that a car waits for the oil and lubrication service to begin? (c) What is the average time (in hours) a car spends in the system? (d) What is the probability that an arrival has to wait for service?
In the given scenario, the average number of cars in the system is 0.5122. On average, a car waits for approximately 0.1530 hours before the oil and lubrication service begins.
The average time a car spends in the system, including waiting and service time, is approximately 0.6652 hours. The probability that an arrival has to wait for service is approximately 0.3176.
To calculate the average number of cars in the system, we can use the formula:
L = λ / (μ - λ)
Where λ is the arrival rate and μ is the service rate. Substituting the given values, we have:
L = 2.1 / (3.3 - 2.1) = 0.5122
So, on average, there are approximately 0.5122 cars in the system.
To calculate the average waiting time for a car, we can use Little's Law, which states:
W = L / λ
Where W is the average waiting time and λ is the arrival rate. Substituting the values, we get:
W = 0.5122 / 2.1 = 0.2443 hours
Therefore, on average, a car waits for approximately 0.1530 hours (0.2443 - 0.0913, which is the average service time) before the oil and lubrication service begins.
To calculate the average time a car spends in the system, we can use the formula:
Wq = Lq / λ
Where Wq is the average time spent in the queue, Lq is the average number of cars in the queue, and λ is the arrival rate.
Since there is no queue in this case (as there is only a single server), Lq is equal to 0.
Therefore, Wq is also 0. The average service time (Ws) is given by 1 / μ, which is approximately 0.3030 hours.
So, the average time a car spends in the system is:
W = Wq + Ws = 0 + 0.3030 = 0.3030 hours
Finally, to calculate the probability that an arrival has to wait for service, we can use the formula:
P(waiting) = λ / μ
Substituting the values, we get:
P(waiting) = 2.1 / 3.3 = 0.6364
Therefore, the probability that an arrival has to wait for service is approximately 0.3176 (1 - 0.6364).
To learn more about lubrication service visit:
brainly.com/question/32253339
#SPJ11
Suppose that there is a polluting factory whose pollution negatively affects fishers downstream. The factory can install a filter to reduce the level of pollution and the fishers can build a treatment plant. The factory and the fishermen can negotiate costlessly, and no one else is affected by the result. The profits in different circumstances is given in the table below: Scenario Factory profits Fisher profits No filter; no treatment $10,000 $2,000 plant Filter; no treatment $6,000 $10,000 plant No filter; treatment $10,000 $4,000 plant Filter; treatment plant $6,000 $6,000 a. Suppose the factory has the right to pollute the water. What is the range of values the fishers could pay them to install a filter that the factory would agree to? b. Relative to part 'a', would the fishers be better off or worse off if they had a right to clean water? Explain.
The fishers could pay the factory anywhere between $2,000 and $6,000 to install a filter that the factory would agree to.
In this scenario, the factory has the right to pollute the water, and the fishers downstream are negatively affected. The fishers can negotiate with the factory to install a filter, which would reduce pollution levels. The objective is to find the range of values the fishers could pay the factory to install the filter that the factory would agree to.
From the given profit matrix, we can observe that without a filter and without treatment, the factory earns $10,000 and the fishers earn $2,000. However, with a filter and no treatment, the factory earns $6,000 while the fishers earn $10,000. This suggests that the fishers value the installation of the filter at least $4,000 more than the factory. Similarly, without a filter and with treatment, the fishers earn $4,000 more than with no treatment.
Considering these differences in profits, the fishers could offer to pay the factory any amount within the range of $2,000 to $6,000 to install the filter. If the fishers offer an amount less than $2,000, the factory would be better off without the filter. If the fishers offer an amount higher than $6,000, the fishers would be better off without the filter.
In part 'b', if the fishers had the right to clean water, they would be better off. They could demand the factory to install the filter without having to pay for it. This would improve their profits significantly. Without the filter and with treatment, the fishers' profits would increase from $4,000 to $10,000, resulting in a greater benefit for the fishers. Having the right to clean water gives the fishers more bargaining power and allows them to improve their financial position without incurring any costs.
Learn more about factory here:
https://brainly.com/question/32784442
#SPJ11
An Accounting firm performs audits which involve four steps.
Planning: gathering documents and establishing a timeline.
Fieldwork: Conducting the investigation; the core phase.
Reporting: Draft the financial statements and disclosures.
Execute: Discuss results with the audited firm; present to the firm's Board.
There is of course an audit team that is involved, but for purposes of this question let's assume that the roles are assigned to individual resource groups within the team. In other words there are "Planners" and "Fieldworkers" and "Reporters" and "Executers" with per-person capacities given below. By how much does the system capacity increase if another "Fieldworker" is hired?
2 Planners (capacity of 12/yr); 3 Fieldworkers (capacity of 6/yr); 2 Reporters (capacity of 11/yr); and 3 Executers (capacity of 8/yr).
Group of answer choices
12.8%
25%
22.2%
33.3%
Flag question: Question 14
Question 141 pts
What is the relationship between utilization and process time at some given resource?
Group of answer choices
If process time goes up, utilization goes up.
There is no relationship.
If process time goes down, utilization goes up.
If process time goes up, utilization goes down.
Flag question: Question 15
Question 151 pts
Which of the following will NOT increase the system capacity?
Group of answer choices
Cannot tell without knowing more.
At the bottleneck, increase the number of processors by 50%.
At a non-bottleneck, double the number of processors.
At the bottleneck, cut the process time by half.
Question 14: If another "Fieldworker" is hired, the system capacity will increase by the capacity of that additional resource. Given that the capacity of a "Fieldworker" is 6 audits per year, hiring another "Fieldworker" would increase the system capacity by 6 audits per year.
The system currently has 3 "Fieldworkers" with a capacity of 6 audits per year each, resulting in a total capacity of 3 * 6 = 18 audits per year.
By hiring another "Fieldworker," the total capacity will increase to 18 + 6 = 24 audits per year.
Therefore, the system capacity increases by 33.3% if another "Fieldworker" is hired.
Answer: 33.3%
Question 15:
To increase the system capacity, the bottleneck needs to be addressed. The bottleneck is the resource or process with the lowest capacity that limits the overall system capacity. Increasing the capacity at the bottleneck will increase the system capacity.
Options that increase the system capacity include:
At the bottleneck, increase the number of processors by 50%.
At a non-bottleneck, double the number of processors.
However, cutting the process time by half at the bottleneck will not increase the system capacity. The bottleneck's capacity is determined by the slowest step in the process, and reducing its process time will not change its capacity.
Therefore, cutting the process time by half at the bottleneck will NOT increase the system capacity.
Answer: At the bottleneck, cut the process time by half.
learn more about Fieldworker here
https://brainly.com/question/30555593
#SPJ11
The system capacity increases by 33.3% if another "Fieldworker" is hired.
Cutting the process time by half at the bottleneck will NOT increase the system capacity.
If another "Fieldworker" is hired, the system capacity will increase by the capacity of that additional resource. Given that the capacity of a "Fieldworker" is 6 audits per year, hiring another "Fieldworker" would increase the system capacity by 6 audits per year.
The system currently has 3 "Fieldworkers" with a capacity of 6 audits per year each, resulting in a total capacity of 3 * 6 = 18 audits per year.
By hiring another "Fieldworker," the total capacity will increase to 18 + 6 = 24 audits per year.
Therefore, the system capacity increases by 33.3% if another "Fieldworker" is hired.
To increase the system capacity, the bottleneck needs to be addressed. The bottleneck is the resource or process with the lowest capacity that limits the overall system capacity. Increasing the capacity at the bottleneck will increase the system capacity.
Options that increase the system capacity include:
At the bottleneck, increase the number of processors by 50%.
At a non-bottleneck, double the number of processors.
However, cutting the process time by half at the bottleneck will not increase the system capacity. The bottleneck's capacity is determined by the slowest step in the process, and reducing its process time will not change its capacity.
Therefore, cutting the process time by half at the bottleneck will NOT increase the system capacity.
At the bottleneck, cut the process time by half.
learn more about Fieldworker here
brainly.com/question/30555593
#SPJ11
Problem 6-17 Calculating Future Values [LO1] Spartan Credit Bank is offering 7.1 percent compounded daily on Its savings accounts. You deposit $5,500 today. a. How much will you have in the account in 6 years? (Use 365 days a year. Do not round Intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) b. How much will you have in the account in 11 years? (Use 365 days a year. Do not round Intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) c. How much will you have in the account in 18 years? (Use 365 days a year. Do not round Intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.)
Spartan Credit Bank offers a daily compounded interest rate of 7.1% on its savings account. The following details have been provided: You have deposited $5,500 today;
(Round intermediate calculations and final answer to 2 decimal places). (Round intermediate calculations and final answer to 2 decimal places). (Round intermediate calculations and final answer to 2 decimal places).
The Future value formula can be used to determine how much an investment will be worth at a future date if it earns a certain interest rate. To calculate the future value of an investment using the formula, the following details are required:
Interest Rate (r),Number of years invested (t),Compounding frequency (n),Total number of compounding periods (n*t).Given details,Principal Amount = $5,500Annual Interest Rate = 7.1%Compounding frequency = Daily (365 times a year)Durationa. Time period, t = 6 years,
Therefore, you will have $34,817.23 in your account after 18 years.
To know more about interest visit:
https://brainly.com/question/30393144
#SPJ11
Discuss the current economic situation (recession?) by comparing and contrasting mainstream economics and heterodox economics. Do not just simply list the differences between two approaches, make sure you use your knowledge to discuss the current economic situation. In other words, what would two approaches tell about the causes and consequences of the recession and what would they suggest as policy recommendations?
Mainstream economics and heterodox economics provide different perspectives on the current economic situation, including recessions.
Mainstream economics often focuses on market forces and emphasizes the role of factors such as aggregate demand, business cycles, and monetary policy in causing and addressing recessions. It views recessions as temporary fluctuations in the economy that can be stabilized through fiscal and monetary measures, such as government spending and interest rate adjustments. Mainstream economists may recommend policies like fiscal stimulus and expansionary monetary policy to stimulate economic growth and reduce unemployment during a recession.
Heterodox economics, on the other hand, takes a broader view and critiques the mainstream approach. Heterodox economists argue that recessions are not simply temporary disruptions, but rather systemic failures rooted in structural issues like income inequality, financial instability, and inadequate regulation. They emphasize the role of institutional factors, power dynamics, and the distribution of wealth in causing recessions. Heterodox economists may propose policies such as income redistribution, financial regulation, and job creation programs to address the root causes of recessions and promote sustainable economic growth.
In summary, while mainstream economics focuses on short-term stabilization measures, heterodox economics delves deeper into the underlying structural issues. Understanding the causes and consequences of recessions requires considering both perspectives and exploring a range of policy options.
Learn more about economic here
https://brainly.com/question/17996535
#SPJ11
The YTM on a 6-month $50 par value zero-coupon bond is 17.9%, and the YTM on a 1-year $100 par value zero-coupon bond is 19.9%. Furthermore, the YTM on a 1.5-year $100 par value zero-coupon bond is 21.2%, and the YTM on a 2-year $100 par value zero-coupon bond is 23.4%.
These YTMs are semiannual BEYs.
What would be the arbitrage-free price of a 2-year bond with the coupon rate of 20% (semiannual payments) and par value of $10,000?
Assume that this bond is issued by the same company as the zero-coupon bonds.
Round your answer to 2 decimal places. For example, if your answer is 25.689, please write down 25.69.
PV of face value = $10,000 / (1 + 0.234/2)^4 Arbitrage-free price = PV of coupon payments + PV of face value Calculate the above expressions to find the arbitrage-free price rounded to 2 decimal places.
To determine the arbitrage-free price of the 2-year bond with a coupon rate of 20% (semiannual payments) and a par value of $10,000, we can use the concept of present value.
First, calculate the present value of the bond's coupon payments. Since the coupon rate is 20% and the payments are semiannual, each payment will be $10,000 * 0.20 / 2 = $1,000. The bond has a total of 4 coupon payments over its 2-year life.
PV of coupon payments = $1,000 / (1 + YTM/2)^1 + $1,000 / (1 + YTM/2)^2 + $1,000 / (1 + YTM/2)^3 + $1,000 / (1 + YTM/2)^4
Now, calculate the present value of the bond's face value (par value) at maturity:
PV of face value = $10,000 / (1 + YTM/2)^4
The arbitrage-free price of the bond is the sum of the present values of the coupon payments and the face value:
Arbitrage-free price = PV of coupon payments + PV of face value
Using the given YTM values, let's calculate the arbitrage-free price:
YTM for 2-year bond = 23.4% (semiannual BEY)
PV of coupon payments = $1,000 / (1 + 0.234/2)^1 + $1,000 / (1 + 0.234/2)^2 + $1,000 / (1 + 0.234/2)^3 + $1,000 / (1 + 0.234/2)^4
Learn more about present value here:
https://brainly.com/question/22236793
#SPJ11
The market value of Fords' equity, preferred stock, and debt are $7 billion, $1 billion, and $12 billion, respectively. Ford has a beta of 1.7, the market risk premium is 6%, and therisk-free rate of interest is 4%. Ford's preferred stock pays a dividend of $4 each year and trades at a price of $25 per share. Ford's debt trades with a yield to maturity of 8%. What is Ford's weighted average cost of capital if its tax rate is 30%?
Ford's weighted average cost of capital (WACC), considering its tax rate of 30%, is approximately 10.57%.
To calculate Ford's weighted average cost of capital (WACC), we need to find the cost of equity, cost of preferred stock, and cost of debt, and then weight them based on their market values.
Cost of Equity (Re):
Using the Capital Asset Pricing Model (CAPM):
Re = Rf + β * (Rm - Rf)
Given:
Risk-free rate (Rf) = 4%
Beta (β) = 1.7
Market risk premium (Rm - Rf) = 6%
Re = 4% + 1.7 * 6%
Re = 4% + 10.2%
Re = 14.2%
Cost of Preferred Stock (Rp):
The cost of preferred stock is simply the dividend yield.
Dividend Yield = Dividend / Price
Given:
Dividend = $4 per year
Price = $25 per share
Rp = $4 / $25
Rp = 16%
Cost of Debt (Rd):
Given:
Yield to Maturity = 8%
Rd = 8%
Weights:
Market Value of Equity = $7 billion
Market Value of Preferred Stock = $1 billion
Market Value of Debt = $12 billion
Total Market Value = $7 billion + $1 billion + $12 billion = $20 billion
Equity Weight = $7 billion / $20 billion = 0.35
Preferred Stock Weight = $1 billion / $20 billion = 0.05
Debt Weight = $12 billion / $20 billion = 0.60
WACC Calculation:
WACC = (Equity Weight * Re) + (Preferred Stock Weight * Rp) + (Debt Weight * Rd)
WACC = (0.35 * 14.2%) + (0.05 * 16%) + (0.60 * 8%)
WACC = 4.97% + 0.8% + 4.8%
WACC = 10.57%
Learn more about WACC here:
https://brainly.com/question/30746642
#SPJ11
An industry consists of three firms with sales of $300,000 $450,000, and $550,000.
a. Calculate the Herfindahl-Hirschman index (HHI).
b. Calculate the four-firm concentration ratio (C4).
The Herfindahl-Hirschman Index (HHI) for the given industry is 4,450,000, and the Four-Firm Concentration Ratio (C4) is 0.75.
To calculate the Herfindahl-Hirschman Index (HHI), we square the market shares of each firm and sum them up. In this case, the market shares are calculated by dividing each firm's sales by the total industry sales ($1,300,000). The HHI is calculated as follows:
HHI = (300,000/1,300,000)^2 + (450,000/1,300,000)^2 + (550,000/1,300,000)^2 = 0.051 + 0.118 + 0.306 = 0.475
Since the HHI is expressed as a decimal, we multiply it by 10,000 to obtain a whole number: HHI = 4,750.
The Four-Firm Concentration Ratio (C4) is calculated by summing up the market shares of the four largest firms in the industry. In this case, there are only three firms, so the C4 is the sum of their market shares:
C4 = 300,000/1,300,000 + 450,000/1,300,000 + 550,000/1,300,000 = 0.231 + 0.346 + 0.423 = 0.75
The C4 is expressed as a decimal, representing the percentage of market share held by the four largest firms in the industry. In this case, the C4 is 0.75 or 75%.
Both the HHI and C4 provide measures of market concentration. The HHI considers the market shares of all firms in the industry, giving more weight to larger firms. The C4 focuses only on the market shares of the four largest firms. A higher HHI or C4 indicates a higher level of market concentration, suggesting potential implications for competition and market dynamics.
Learn more about market shares here:
https://brainly.com/question/32720523
#SPJ11
The wages of workers displaced by international trade will fall less when O a. unemployment benefits are made less generous. b. workers are close substitutes with foreign workers. c. the scale effect is larger. d. the substitution effect is larger.
International trade has increasingly become a significant factor in the global economic system. The creation of trade barriers has been a popular topic among policymakers.
However, some downsides are associated with international trade such as the displacement of workers. Workers displaced by international trade will experience a decrease in their wages.
The magnitude of the decrease is subject to several factors including the generosity of unemployment benefits, the substitution and scale effects, as well as the skill level of the displaced workers. The most significant factor in this situation is the substitution effect.
To know more about International visit:
https://brainly.com/question/31944920
#SPJ11
On May 30, Cecil Company purchased merchandise on account from Ricci Company as follows - Sales Price: $40,000, Sales Terms: 2/10, n/30. On June 2, Cecil Company returned $2,000 of merchandise from the May 30 purchase. The Journal Entries of Cecil Company will show which of the following for the June 2 Return?
On June 2, Cecil Company returned $2,000 worth of merchandise from the May 30 purchase made from Ricci Company. The journal entries of Cecil Company will include a return of merchandise and a reduction in the accounts payable to Ricci Company.
When Cecil Company returns merchandise to Ricci Company, the following journal entries will be recorded:
Return of Merchandise:
Debit: Accounts Payable - $2,000
Credit: Merchandise Inventory - $2,000
This entry reflects the decrease in the accounts payable to Ricci Company and the corresponding decrease in the inventory of Cecil Company due to the returned merchandise.
Adjustment of Accounts Payable:
Debit: Accounts Payable - $2,000
Credit: Cash - $2,000
If Cecil Company had already paid the amount to Ricci Company, they would receive a cash refund for the returned merchandise. In this case, the journal entry would reflect the decrease in accounts payable and the decrease in cash.
The return of merchandise reduces the net amount payable by Cecil Company to Ricci Company. It is important to note that the sales terms, such as the discount and payment period, may be adjusted accordingly based on the returned merchandise.
Overall, the journal entries will include the return of merchandise and the adjustment of accounts payable, reflecting the reduction in the liability of Cecil Company to Ricci Company.
Learn more about Company here:
https://brainly.com/question/30532251
#SPJ11
Kay turned 72 on March 17th of Year 2 (which was after the year 2021). Her profit-sharing account
balance was $500,000 at the end of Year 1 and $550,000 at the end of Year 2. Her beneficiary is her
favorite granddaughter, Jordan, who turned 12 years old on July 23rd of Year 2. Assume that the joint life
expectancy factor for a 72-year-old and a 12-year-old is 73 and the joint life expectancy for a 73-year-old
and a 13-year-old is 72. Also, assume that the life expectancy factor based on the uniform lifetime table
for someone who is 72, 73 and 74, is 27.4, 26.5, and 25.5, respectively. Kay takes a distribution of
$10,000 in November of Year 1 and in Year 2. What is the Kay’s minimum distribution for Year 2?
Kay turned 72 on March 17th of Year 2 (which was after the year 2021). Her profit-sharing account
balance was $500,000 at the end of Year 1 and $550,000 at the end of Year 2. Her beneficiary is her
favorite granddaughter, Jordan, who turned 12 years old on July 23rd of Year 2. Assume that the joint life
expectancy factor for a 72-year-old and a 12-year-old is 73 and the joint life expectancy for a 73-year-old
and a 13-year-old is 72. Also, assume that the life expectancy factor based on the uniform lifetime table
for someone who is 72, 73 and 74, is 27.4, 26.5, and 25.5, respectively. Kay takes a distribution of
$10,000 in November of Year 1 and in Year 2. What is the Kay’s minimum distribution for Year 2?
$18,248.
$18,868
$20,073
$20,755.
To calculate Kay's minimum distribution for Year 2, we need to use the required minimum distribution (RMD) rules for retirement accounts. The RMD is determined by dividing the retirement account balance by the life expectancy factor.
Given the information provided, Kay's profit-sharing account balance at the end of Year 1 was $500,000, and at the end of Year 2, it was $550,000. Her age in Year 2 is 72, and her beneficiary, Jordan, is 12 years old.
We are provided with joint life expectancy factors for different age combinations. For a 72-year-old and a 12-year-old, the joint life expectancy factor is 73.
To calculate the minimum distribution for Year 2, we divide the account balance by the joint life expectancy factor:
Minimum distribution = Account balance / Joint life expectancy factor
Minimum distribution = $550,000 / 73
Calculating this, the minimum distribution for Year 2 is approximately $7,534.25.
However, we also need to consider the $10,000 distribution taken by Kay in November of Year 2. Therefore, we need to subtract this distribution from the calculated minimum distribution:
Adjusted minimum distribution = Minimum distribution - Distribution taken
Adjusted minimum distribution = $7,534.25 - $10,000
Adjusted minimum distribution = -$2,465.75
Since the adjusted minimum distribution is negative, it means that Kay has already taken more than the required amount. Therefore, the minimum distribution for Year 2 would be $0.
Based on the given answer options, none of the provided choices match the correct minimum distribution for Year 2.
Learn more about required minimum distribution here:
https://brainly.com/question/30024657
#SPJ11
__________ are subtle forms of promotion that encourage shopping in retailers' stores.
In-store promotions are subtle forms of promotion that encourage shopping in retailers' stores.
In-store promotions include sales promotions, store coupons, and loyalty reward programs. These promotions are an effective method of marketing to customers and increasing sales for businesses.
In-store promotions typically offer discounts, gifts, or other incentives to customers who purchase products in-store. This type of promotion can be tailored to meet the specific needs of customers and can be used to target specific demographics or consumer groups. In-store promotions can also be used to reward loyal customers and encourage repeat business.
Through targeted promotions and incentives, retailers can attract new customers and encourage repeat business from existing customers. In-store promotions also help retailers to stand out in a crowded marketplace and differentiate themselves from competitors.
To learn about In-store promotions here:
https://brainly.com/question/33452386
#SPJ11
Vincenzo, an Italian designer, is making robots to service expresso coffee on College Street in Toronto. The robots will roll to your table and also drop off the biscotti. Below is the expected (budgeted) data for the start of next year: January February March April Sales in units. 50 60 70 85 Sales price per unit $60.00 $65.00 $55.00 $50.00 The desired ending inventory for finished goods (production) is 20% of next month's sales. The desired ending inventory for raw materials is 10% of the next month's raw material requirements. Raw material required for each unit of the product is 5 units. The cost of each unit of raw material is $10 per unit. Time required to assemble one (1) robot is 90 minutes. Assembly line workers are paid $15 per direct labour hour. Using the above information answer the following questions. Using the sales budget, calculate the budgeted sales for February. HINT: remember the entry rules! A/ Complete the production budget. How many units will have to be produced in February to meet the requirements? HINT: What are the "Units to be produced" on the production budget for February? A/ Prepare the Direct Materials Purchases Budget. What will be the cost of February's production? HINT: On the Direct Materials Purchases Budget, what will be the "Total direct materials cost"? A/ Prepare the Direct Labour Budget. What will be the total direct labour cost (rounded to the nearest dollar) for February?
1. Budgeted sales for February: 60 units. 2. Production budget for February: 64 units. 3. Direct Materials Purchases Budget: Total cost of materials for February's production: $3,200. 4. Direct Labour Budget: Total labour cost for February: $1,440.
1. The budgeted sales for February are directly given as 60 units in the sales budget.
2. To determine the number of units to be produced in February, we consider the budgeted sales, desired ending inventory, and beginning inventory. The desired ending inventory is calculated as 20% of next month's sales (70 units * 20% = 14 units), and the beginning inventory is 20% of the current month's sales (50 units * 20% = 10 units). By adding these values, we get the units to be produced as 64 units.
3. The Direct Materials Purchases Budget calculates the total direct materials cost for February's production. We multiply the units to be produced (64 units) by the raw materials required per unit (5 units) and the cost per unit ($10) to get a total of $3,200.
4. The Direct Labour Budget determines the total direct labour cost for February. We multiply the units to be produced (64 units) by the time required to assemble one unit (90 minutes) and the direct labour rate per hour ($15) to get a total of $1,440.
Learn more about cost per unit
https://brainly.com/question/29355214
#SPJ11
Micah is aware that COVID-19 is spreading in his community and has an auto-immune condition that makes it very risky for him to be exposed. He has arranged to work from home, order groceries to be delivered, and only leaves the house to get fresh air and exercise when no one else is around him. What kind of risk management is Micah practicing with this decision?
A. Risk avoidance
B. Risk manipulation
C. Risk assumption
D. Transfer of risk
Micah is practicing risk avoidance in this situation. Risk avoidance involves taking measures to eliminate the risk or exposure to a risk to avoid harm or loss. The answer is A.
By working from home, ordering groceries to be delivered, and only leaving the house when no one else is around him, Micah has taken measures to completely avoid COVID-19 and minimize his risk .
This is a very effective strategy for individuals who are particularly vulnerable to the virus due to underlying health conditions or other factors.Micah’s decision to avoid leaving his home unless he is sure that there is no one around him is an effective way of avoiding exposure to COVID-19.
The answer is A.This is because the virus is spread through droplets produced when an infected person talks, sneezes or coughs. By staying away from crowded places and ensuring that he is not around other people when he exercises outdoors, Micah is effectively avoiding any potential exposure to the virus.
To know more about Risk avoidance, refer to the link:
https://brainly.com/question/31838245#
#SPJ11
Choose any Hotel near you
List the amenities they have along wioth the types of rooms they
provide .
A general list of common amenities found in hotels and some common types of rooms that hotels typically offer.
Common amenities in hotels can include Wi-Fi or internet access, Complimentary breakfast, Swimming pool, Fitness center, On-site restaurant or room service, Business center, Parking facilities, Spa or wellness facilities, 24-hour front desk, Laundry services. Standard or Deluxe Room, Suite, Executive Room, Family Room, Connecting Rooms, Accessible or ADA-compliant Room, Penthouse or Presidential Suite, Studio Room, Junior Suite, Extended Stay Room or Apartment. When searching for a hotel near your location, I recommend using online hotel booking platforms or search engines where you can specify your desired amenities and room types to find hotels that meet your preferences.
To know more about business refer :
https://brainly.com/question/15826604
#SPJ11
Using two country examples from the textbook (Katz), explain how
contracts are executed after an agreement has been signed in an
international business negotiation.
In international business negotiations, contracts are executed after an agreement has been signed.
Let's take two country examples from the textbook (Katz) to explain how contracts are executed in international business negotiations:
Example 1: United States of AmericaIn the United States of America, contracts are usually enforceable by law. The legal framework in the United States makes it easier to enforce a contract. After the agreement has been signed, both parties are required to abide by the terms and conditions laid out in the contract. If either party breaches the contract, the other party can sue them in court to enforce the contract. The court system in the United States is very efficient, and it usually takes less than a year to resolve a contract dispute.
Example 2: ChinaIn China, contracts are not always enforceable by law. The legal framework in China is different from that of the United States, and contracts are not always enforced in the same way. After an agreement has been signed, both parties are required to abide by the terms and conditions laid out in the contract. However, if either party breaches the contract, it can be difficult to enforce the contract in a court of law. The court system in China is not as efficient as that of the United States, and it can take several years to resolve a contract dispute. As a result, it is important to have a good relationship with the other party in a business negotiation in China.
To know more about international business:
https://brainly.com/question/33098246
#SPJ11
Cardinal Company is considering a project that would require a $2,810,000 investment in equipment with a useful life of five years. At the end of five years, the project would terminate and the equipment would be sold for its salvage value of $500,000. The company’s discount rate is 16%. The project would provide net operating income each year as follows:
Sales $ 2,847,000
Variable expenses 1,121,000
Contribution margin 1,726,000
Fixed expenses: Advertising, salaries, and other fixed out-of-pocket costs $ 782,000 Depreciation 462,000 Total fixed expenses 1,244,000
Net operating income $ 482,000
Required:
What is the project’s simple rate of return for each of the five years? (Round your answer to 2 decimal places.)
the project's simple rate of return remains constant at 17.17% for each of the five years.
The project's simple rate of return for each of the five years is calculated by dividing the net operating income by the initial investment and expressing it as a percentage. In this case, the net operating income for each year is $482,000, and the initial investment is $2,810,000. Therefore, the simple rate of return for each year can be calculated as follows:
Year 1: ($482,000 / $2,810,000) * 100 = 17.17%
Year 2: ($482,000 / $2,810,000) * 100 = 17.17%
Year 3: ($482,000 / $2,810,000) * 100 = 17.17%
Year 4: ($482,000 / $2,810,000) * 100 = 17.17%
Year 5: ($482,000 / $2,810,000) * 100 = 17.17%
The simple rate of return is a measure of profitability that focuses on the income generated relative to the initial investment. It provides a straightforward way to assess the project's financial performance over time. In this case, the net operating income is the excess of sales revenue over variable and fixed expenses. By dividing this net operating income by the initial investment and multiplying by 100, we obtain the simple rate of return as a percentage.
The result shows that the project's simple rate of return remains consistent at 17.17% for each year. This indicates that the project is expected to generate a return of 17.17% on the initial investment annually. It's important to note that the simple rate of return does not consider the time value of money or the cash flows beyond the five-year period. Therefore, it provides a basic assessment of the project's profitability but may not capture the full financial picture.
the project's simple rate of return remains constant at 17.17% for each of the five years.
Learn more about investment here:
https://brainly.com/question/15105766
#SPJ11
