The scientist who performed an experiment with a cathode ray tube and discovered the existence of negatively charged particles within the atom was J.J. Thomson.
This experiment is commonly known as the cathode ray tube experiment. A cathode ray tube experiment is a scientific experiment that was carried out to show that negatively charged particles exist in atoms. The experiment involves passing an electric current through a gas-filled tube called a cathode ray tube. J.J. Thomson discovered that cathode rays were made up of negatively charged particles called electrons. He discovered that the charge to mass ratio of these particles was much greater than that of the atoms that the cathode ray tube was made of. This led him to conclude that these particles were not part of the atom but were rather a fundamental constituent of all atoms.
This was a groundbreaking discovery and it led to the development of the atomic model. The first "subatomic particles," called electrons by Irish scientist George Johnstone Stoney in 1891, were negatively charged particles smaller than atoms. J. J. Thomson was able to measure the charge-mass ratio of cathode rays in 1897 and demonstrate this. Ferdinand Braun, a German physicist, created the "Braun tube," the first iteration of the CRT, in 1897. A Crookes tube modified with a phosphor-coated screen, it was a cold-cathode diode. It was Braun who originally thought of using a CRT as a display device.
For more such questions on J.J. Thomson , Visit:
https://brainly.com/question/18621643
#SPJ11
According to octet rule, atoms tends to acheive _____ electrons in the outermost shell.A sixB fourC eightD one
According to the octet rule, atoms tend to achieve eight electrons in the outermost shell. The reason behind this tendency is that the atoms try to achieve a stable electronic configuration, which is similar to the noble gases, whose electronic configuration is stable.
The arrangement of an atom's or molecule's (or other physical structure's) electrons in their atomic or molecular orbitals is known as the electron configuration in atomic physics and quantum chemistry. For instance, the neon atom's electron configuration is 1s2 2s2 2p6, which means that 1, 2 and 6 electrons, respectively, are present in each of the 1s, 2s, and 2p subshells. According to electronic configurations, each electron moves individually within an orbital while being surrounded by an average field produced by all other orbitals. Slater determinants or configuration state functions are used to mathematically describe configurations. For systems with a single electron, the laws of quantum mechanics state that each electron configuration has a specific amount of energy, and that under certain circumstances, electrons can switch between configurations.
Electronic configuration is the distribution of electrons in various shells or orbitals. According to the octet rule, the outermost shell of the atoms must contain eight electrons for the atom to be stable. The octet rule is one of the essential rules that govern the formation of chemical compounds. It states that atoms tend to combine with other atoms in such a way that they will have eight electrons in their outermost shell or valence shell, which makes them more stable. The octet rule explains that the atoms combine or share electrons to form a compound in a way that each atom achieves eight electrons in its valence shell.
The sharing or transfer of electrons from one atom to another results in the formation of ionic or covalent bonds, which is the basis of chemical reactions.
For more such questions on electronic configuration , Visit:
https://brainly.com/question/26084288
#SPJ11
a) Is the energy absorption associated with bands in an infrared spectrum of higher or lower energy than the lines appearing in a visible line spectrum. Explain?
b) Identify the type of energy transition occuring in a molecule that causes a band to appear in an infrared spectrum.
c) Identify the type of energy transition occuring in an atom that causes a line to appear in a visible line spectrum.
a) The energy absorption associated with bands in an infrared spectrum is of lower energy than the lines appearing in a visible line spectrum because infrared light has a longer wavelength than visible light, meaning that the energy required for the absorption is lower. b) The type of energy transition occurring in a molecule that causes a band to appear in an infrared spectrum is a transition from one vibrational state to another. c) The type of energy transition occurring in an atom that causes a line to appear in a visible line spectrum is an electronic transition.
a) The energy absorption related to bands in an infrared spectrum is lower in energy than the lines appearing in a visible line spectrum. The energy absorption in infrared spectrum ranges from [tex]4000 cm^{-1} to 400 cm^{-1}[/tex] . The visible spectrum of lines comes from the emission spectra of atoms, and each line corresponds to a particular energy level transition in an atom. The energy absorption related to bands in an infrared spectrum is lower in energy than the lines appearing in a visible line spectrum. The frequency of energy is higher when electromagnetic radiation has a shorter wavelength (or greater frequency). Electromagnetic radiation is characterized by frequency and wavelength, which are inversely proportional. Thus, radiation with a greater frequency has a shorter wavelength, whereas radiation with a lower frequency has a longer wavelength.
b) When a molecule absorbs energy, it undergoes an energy transition from one energy level to another. Infrared absorption spectroscopy measures the vibrations of molecular bonds, which correspond to the transitions between the vibrational energy levels of a molecule. Molecular vibrational energy is absorbed when infrared radiation is absorbed. When the energy absorbed is equal to the difference between the vibrational energy states of the molecule, an infrared band is observed.
c) Visible line spectra are produced when electrons transition from a higher energy level to a lower one, causing a photon of light to be emitted. When an atom absorbs energy, such as from a flame, a plasma arc, or an electrical discharge, its electrons can be promoted to higher energy levels. When the electrons relax back to the ground state, they emit energy in the form of electromagnetic radiation. The emitted light occurs in different regions of the visible spectrum, with each color corresponding to a specific energy level transition of the atom.
To know more about the infrared spectrum, click on the below link:
https://brainly.com/question/29796312
#SPJ11
what information does the first and third digit of the VESPR number provide
Answer:
The first and third digit of the VSEPR notation indicate the number of electron groups and lone pairs on the central atom, respectively. This information is used to determine the molecular geometry of a molecule. For example, in the notation AX3E2, the first digit "3" represents three electron groups around the central atom, while the third digit "2" represents two lone pairs on the central atom, leading to a trigonal bipyramidal molecular geometry.
Explanation:
The VSEPR (Valence Shell Electron Pair Repulsion) number is a shorthand notation used to describe the molecular geometry of a molecule based on the number of electron groups (bonding and non-bonding) around the central atom.
The first digit of the VSEPR number indicates the number of electron groups around the central atom, while the third digit indicates the number of lone pairs on the central atom.
For example, in the VSEPR notation AX3E2, the first digit "3" indicates that there are three electron groups around the central atom, and the third digit "2" indicates that there are two lone pairs on the central atom. This notation corresponds to a trigonal bipyramidal molecular geometry, where three bonding pairs and two lone pairs are arranged symmetrically around the central atom.
Answer:
Explanation:The volume of a gas 100mmHg pressure and at 40°C is 480mL. What volume does the gas occupy at standard temperature and pressure
If a sample of radioactive isotopes takes 60 minutes to decay from 200 grams to 50 grams, what is the half-life of the isotope
The radioactive atom in this sample has a half-life of about 138.6 minutes.
The half-life of a radioactive isotope is the time required for half of the atoms in a sample to decay. The half-life of an isotope depends on its specific decay rate, which is determined by its nuclear properties.
In this case, the sample of radioactive isotopes decays from 200 grams to 50 grams over a period of 60 minutes. We can use this information to calculate the half-life of the isotope using the following equation:
N = N₀ x [tex](1/2)^(t/T)[/tex]
where N is the final amount of the isotope (50 grams), N₀ is the initial amount of the isotope (200 grams), t is the time elapsed (60 minutes), and T is the half-life of the isotope (in minutes).
Substituting the given values into the equation, we get:
50 = 200 x [tex]1/2^{(60/T)}[/tex]
Dividing both sides by 200 and taking the natural logarithm of both sides, we get:
ln(1/4) = -60/T
Solving for T, we get:
T = -60 / ln(1/4) ≈ 138.6 minutes
Therefore, the half-life of the radioactive isotope in this sample is approximately 138.6 minutes.
To learn more about isotopes refer to:
brainly.com/question/5357969
#SPJ4
Carbon dioxide gas is collected in a laboratory experiment to determine the molar mass of the compound. At 294 Kand 1.01 atm, 1.008 grams of co2 was collected when a 500 mL flask was filled with the evolved co2. What is the experimental molar mass of co2? a. 41.5 g/molb., 44.0 g/mol c. 46.9 g/mol d 48.2 g/mol
The experimental molar mass of CO2 collected in a laboratory experiment is 44.0 g/mol.
When carrying out laboratory experiments, carbon dioxide gas is collected to determine the molar mass of the compound. When a 500 mL flask was filled with the evolved CO2 at 294 K and 1.01 atm, 1.008 grams of CO2 was collected. It is required to determine the experimental molar mass of CO2. To solve the problem, we will make use of the ideal gas law formula:
P.V = n.R.T Where,P = 1.01 atmV = 500 mL = 0.500 Ln = number of moles of CO2R = 0.0821 L.atm.K-1.mol-1T = 294 K Substituting the values in the formula, we get;1.01 atm × 0.500 L = n × 0.0821 L.atm.K-1.mol-1 × 294 K1.01 × 0.500 = n × 24.79n = (1.01 × 0.500) / 24.79n = 0.02039 moles of CO2. We know that the mass of CO2 that was collected is 1.008 grams.Therefore, the molar mass of CO2 = mass / number of moles = 1.008 g / 0.02039 mol = 49.38 g/mol
But, we know that CO2 has a molar mass of 44.01 g/mol. Hence, the value of 49.38 g/mol is not the experimental molar mass of CO2 and so, we have to calculate the experimental molar mass of CO2 as follows:Experimental molar mass of CO2 = mass / number of moles = 1.008 g / 0.02039 mol = 49.38 g/mol. Actual molar mass of CO2 = 44.01 g/mol.
Experimental error = | experimental value - actual value | / actual value × 100%.Substituting the values in the formula, we get;
Experimental error = | 49.38 - 44.01 | / 44.01 × 100%
Experimental error = 12.2% ≈ 12%.
Therefore, the experimental molar mass of CO2 is 44.0 g/mol (Option b).
More on molar mass: https://brainly.com/question/18879890
#SPJ11
Match each equation for calculating heat lost or gained (q) during a process to its correct application. Drag statements on the right to match the left. Heating or cooling within a phase if moles are given C- q = nCAT Heating or cooling during a phase change D-a 9 = NAH change Heating or cooling within a phase if mass is given CHO q=mcAT
The correct match are: q = nCAT for Heating or cooling within a phase if moles are given, q = NAΔH for Heating or cooling during a phase change, and q = mcΔT for Heating or cooling within a phase if mass is given.
What is the heat loss during phase change?q = nCAT is used to calculate Heat lost or gained when heating or cooling within a phase if moles are given. In this equation, n is the number of moles, C is the heat capacity of the substance, A is the temperature change.
q = NAΔH is used to calculate Heat lost or gained when heating or cooling during a phase change. In this equation, N is the number of moles, ΔH is the enthalpy of fusion or vaporization.
q = mcΔT is used to calculate Heat lost or gained when heating or cooling within a phase if mass is given. In this equation, m is the mass of the substance, c is the specific heat capacity of the substance, ΔT is the temperature change.
Learn more about Phase change here:
https://brainly.com/question/30270780
#SPJ11
the enzyme pyruvate dehydrogenase generates _____ acetyl coa, _______ nadh, and _____ co2 molecule.
The enzyme pyruvate dehydrogenase generates 1 acetyl coA, 2 NADH, and 1 CO2 molecule.
Pyruvate dehydrogenase (PDH) is a complex enzyme located in the mitochondria of eukaryotic cells and is responsible for catalyzing the oxidation of pyruvate to Acetyl-CoA. This oxidation is the first step of the Krebs Cycle, the metabolic pathway by which most organisms obtain energy from carbohydrates.
During this oxidation, PDH converts 1 molecule of pyruvate into 1 molecule of Acetyl-CoA, 2 molecules of NADH, and 1 molecule of CO2.
PDH is composed of 3 components, each with its own unique function: E1, E2, and E3.
E1 is responsible for the decarboxylation of pyruvate, producing CO2.
E2 then forms the thioester bond between acetyl and CoA, producing acetyl-CoA. Finally,
E3 oxidizes NADH, producing 2 molecules of NADH.
This series of reactions allows for the energy stored in carbohydrates to be efficiently released, providing the cells with the energy they need to function. This is why the enzyme PDH is so important for the survival of most organisms.
for such more question on pyruvate dehydrogenase
https://brainly.com/question/29997944
#SPJ11
6.carbon 14 (14c) is unstable and has a half-life of 5730 years. an organic material buried in sedimentary rocks shows the parent-daughter ratio at 1:15 (meaning 1/16 parent, 15/16 daughter). assuming there was no daughter element at the time of burial, how old is this organic material?
The time of burial, the organic material will be about 34,880 years old.
What is the half-life of an element?Half-life (t½) is the time which is required for a quantity of the substance to reduce to the half of its initial value. The term is commonly used in the nuclear physics to describe how quickly the unstable atoms or chemical elements undergo the radioactive decay or how long the stable atoms survive.
The amount of carbon 14 (14C) which can be found in the organic matter decreases due to the radiocarbon process. This process is also called as the radioactive decay. The half-life of carbon-14 (14C) is 5730 years. An organic material which was buried in the sedimentary rocks is examined, and it is the parent-daughter ratio is equal to about 1:15, indicating that there will be 1/16 of the parent element and 15/16 of the daughter element.
The organic material is supposed to have no daughter element at the time of burial. The age of this organic material is to be calculated. As given, the ratio of parent-daughter elements is 1:15 (1/16 parent, 15/16 daughter). After one half-life (i.e., 5730 years), half of the parent atoms will have decayed to the daughter atoms. Therefore, the parent-to-daughter ratio would be 1/32 parent, 31/32 daughter.
After the two half-lives (5730 + 5730 = 11460 years), 1/4 of the original parent atoms will remain, and the ratio will be 1/4 parent, 3/4 daughter. 1/4 is equal to 4/16. 4/16 + 12/16 = 16/16 = 1. This implies that the original amount of carbon 14 (14C) was about 4/16 of what it would have been if there were no daughter material present. To determine the age of the organic material, we may set up the following equation:
Parent to daughter ratio = 1:15 after 2 half-lives,
which is 5730 × 2 = 11,460.15/16 = (1/2)² × (1/16) = 1/64 (15 daughter atoms)
Therefore, there were originally 4 × 15 = 60 carbon 14 (14C) atoms.
1/64 = 1/60 × (1/2)n where n is the number of half-lives which have occurred.
Multiplying both sides by 60 × 64 gives: 1 = 64 × (1/2)n
Subtracting 64 from both sides gives: 63 = (1/2)n
Taking the natural logarithm of both sides gives: ln(-63) = n ln(1/2)
The value of ln(1/2) is -0.69315, so:
n = ln(-63)/ln(1/2)n = 6.0 half-lives have passed (rounded up).
Therefore, the organic material is 6 × 5730 = 34,380 years old.
Learn more about Half-life here:
https://brainly.com/question/24710827
#SPJ11
For each of the following precipitation reactions, calculate how many grams of the first reactant are necessary to completely react with 17.3 g of the second reactant.Part A2KI(aq)+Pb(NO3)2(aq)→PbI2(s)+2KNO3(aq)m = 17.3 gSubmitMy AnswersGive Up
17.264 g of 2KI (potassium iodide) is necessary to completely react with 17.3 g of Pb(NO3)2 in a precipitation reaction.
To calculate the mass of the first reactant required, we will use the mole concept.
Let's first write the balanced chemical equation.
A 2KI(aq) + Pb(NO₃)₂ (aq) → PbI₂(s) + 2KNO₃(aq)
We need to find the number of moles of Pb(NO₃)₂.
To do that, we will use the given mass of Pb(NO₃)₂ and its molar mass.
Molar mass of Pb(NO₃)₂ = 207.2 + 3(14.01) + 6(16) = 331.2 g/mol
Number of moles of Pb(NO₃)₂ = mass / molar mass = 17.3 / 331.2 = 0.052 moles
From the balanced chemical equation, we see that 1 mole of Pb(NO₃)₂ reacts with 2 moles of KI.
Therefore, the number of moles of KI required would be twice the number of moles of Pb(NO₃)₂.
The number of moles of KI required = 2 x 0.052 = 0.104 moles
To calculate the mass of KI required, we will use its molar mass.
The molar mass of KI = 39.10 + 126.90 = 166.0 g/mol
Mass of KI required = a number of moles x molar mass = 0.104 x 166.0 = 17.264 g
Therefore, 17.264 g of KI is required to completely react with 17.3 g of Pb(NO₃)₂.
Learn more about the calculation of grams here:
https://brainly.com/question/28902645
#SPJ11
According to Appendix D of your lab manual, how do you determine if a data point can be ignored when calculating the average in General Chemistry? By using the Q-test at 90% confidence By using the Q-test at 95% confidence By using the standard deviation at 90% confidence By using the standard deviation at 95% confidence The spectator ions in the reaction between aqueous perchloric acid and aqueous barium hydroxide are: HT, OH", C104, and Ba2+ CI04 and Ba2+ H+ and Ba2+ OH and CIO4 H+ and OH-
To determine if a data point can be ignored when calculating the average in General Chemistry, Appendix D of the lab manual recommends using the Q-test at 95% confidence. The Q-test is a statistical test that is used to determine if a data point is an outlier, or if it falls outside the expected range of values for the data set.
To use the Q-test, one must calculate the Q-value for each data point and compare it to the critical Q-value at the desired level of confidence. If the calculated Q-value is greater than the critical Q-value, then the data point is considered an outlier and can be excluded from the calculation of the average.
Regarding the second question, the spectator ions in the reaction between aqueous perchloric acid and aqueous barium hydroxide are H+ and ClO4-. These ions do not participate in the chemical reaction, but are present in the solution due to the dissociation of the reactants. The actual chemical reaction is the formation of insoluble barium perchlorate (Ba(ClO4)2) and water (H2O) through the combination of barium hydroxide (Ba(OH)2) and perchloric acid (HClO4), which are the only ions involved in the reaction.
To learn more about barium hydroxide refer to
brainly.com/question/30888146
#SPJ4
which example is an exothermic reaction? responses dissolving sugar in water dissolving sugar in water melting ice melting ice dissolving ammonium nitrate in water to cool the water dissolving ammonium nitrate in water to cool the water condensation
The correct option is dissolving ammonium nitrate in water to cool the water.
Among the given options, the example of an exothermic reaction is dissolving ammonium nitrate in water to cool the water.
Exothermic reactions are chemical reactions that release heat energy into the surroundings. As a result, the products have less energy than the reactants. Dissolving ammonium nitrate in water to cool the water is a good example of an exothermic reaction because it releases heat energy and cools down the surrounding water.
When ammonium nitrate dissolves in water, it releases heat, causing the temperature of the water to decrease. The reaction is exothermic because it releases heat to the surroundings. Dissolving sugar in water and melting ice are examples of endothermic reactions because they absorb heat energy from the surroundings.
Therefore, the correct answer is the option of dissolving ammonium nitrate in water to cool the water.
To learn more about exothermic reactions refer - https://brainly.com/question/10373907
#SPJ11
In modeling solid-state structures, atoms and ions are most often modeled as spheres. A structure built using spheres will have some empty, or void, spaces in it. A measure of void space in a particular structure is the packing efficiency, defined as the volume occupied by the spheres divided by the total volume of the structure.
Given that a solid crystalizes in a face centered cubic structure that is 4.10 {eq}\overset{o}{A} {/eq} on each side. How many total atoms are there in each unit cell?
There are the presence of atoms on eight corners of the face centered cubic lattice.
Void spaces are called as the gaps that lie within certain constituent particles. These void spaces are highly packed and they can be packed in 1D, 2D, or 3D. Such complexes are seen in many complexes such as coordination complexes. The face-centered cubic lattice which is called FCC is described as the arrangement in which there is an arrangement of atoms at corners as well as at the center of cell's each cube face. There is the presence of four atoms in one unit cell in such lattices. This is a cube with an atom on each corner and each face. It has atoms at each corner of the cube and six atoms at each face of the cube.
a= 5.01°A on each side.
To learn more about face-centered cubic lattice
https://brainly.com/question/14927070
#SPJ4
The complete question is,
In modeling solid-state structures, atoms and ions are most often modeled as spheres. A structure build using spheres will have some empty, or void, space in it. A measure of void space in a particular structure is the packing efficiency, defined as the volume occupied by the spheres divided by the total volume of the structure.
Given that a solid crystallizes in a face centered cubic structure that is 5.01 A on each side.
How many total atoms are there in each unit cell?
how many millilitres of 0.200 m naoh are required to neutralize 20.0 ml of 0.100 m hcl?
10.0 mL of 0.200 M NaOH is required to neutralize 20.0 mL of 0.100 M HCl.
To calculate the milliliters of 0.200 M NaOH that are required to neutralize 20.0 mL of 0.100 M HCl, the following steps are used:
Step 1: Write the balanced chemical equation 2 NaOH (aq) + H2SO4 (aq) → Na2SO4 (aq) + 2 H2O (l)
Step 2: Determine the number of moles of the HCl solution: Concentration = 0.100 MVolume = 20.0 molarity = moles / LTherefore, Moles of HCl = (0.100 mol/L) × (20.0 mL / 1000 mL/L) = 0.00200 moles of HCl
Step 3: Determine the number of moles of NaOH needed to neutralize the HCl.The balanced equation shows that one mole of NaOH reacts with one mole of HCl.Therefore, Moles of NaOH = Moles of HCl = 0.00200 moles of NaOH
Step 4: Determine the volume of NaOH needed to reach the moles of NaOH needed to neutralize the HCl.Concentration = 0.200 MVolume = ?Molarity = moles / LTherefore, Volume = Moles / Molarity = 0.00200 moles / 0.200 M = 0.0100 L = 10.0 mL.
Learn more about molarity here:
https://brainly.com/question/8732513
#SPJ11
True or False : The experimental group is the group that is left alone during the experiment.
Answer:
False.
The experimental group is the group that is subjected to a specific treatment or intervention in an experiment, while the control group is the group that is left alone or given a placebo to compare the effects of the treatment.
Calcula el volumen en litros que tendran 2 kg de poliestireno expandidos (densidad = 0,92g/cm3)
2 kg of expanded polyethylene has a volume of 2.17 liters.
Given that,
Density = 0.9g/cm³
Mass = 2kg = 2000g
Density is the substance's mass per unit of volume. Although the Roman letter D may also be used, the sign most frequently used for density is ρ (the lowercase Greek letter rho). A substance's density changes as a function of pressure and temperature. With solids and liquids, this variance is often slight, but for gases, it is much more pronounced.
Density = Mass ÷ Volume
0.92 = 2000 ÷ Volume
Volume = 2000 ÷ 0.92
Volume = 2.17 liters.
Hence, 2 kg of expanded polyethylene has a volume of 2.17 liters.
To learn more about density, refer to:
https://brainly.com/question/26364788
#SPJ4
Your question is in Spanish. The English translation of the question is:
Calculate the volume of 2 kg of expanded polyethylene in liters. ( Density = 0.92g/cm³ )
Based on the same principles as above, classify the radioactive decays as alpha emission, beta emission, or electron capture.Alpha emission:Beta Emission:Electron Capture:-40K19-218Po84-226Ra88
-234Th90
For the given radioactive decays: ₄₀K¹⁹: Beta emission ₂₁₈Po⁸⁴: Alpha emission ₂₂₆Ra⁸⁸: Electron capture. Alpha particles are helium nuclei (2 protons and 2 neutrons) emitted from some unstable nuclei of elements.
What are gamma rays?Gamma rays are a type of electromagnetic radiation, much like x-rays, visible light and radio waves. Gamma rays possess the highest frequency and the most energy of all types of electromagnetic radiation, and are created in the most extreme environments in the Universe. They are emitted from the nuclei of atoms some natural events such as supernovae, and can range from very low energies to the highest energies of all electromagnetic radiation. Gamma rays are used for in the medical field to diagnose and treat certain illnesses, however their high energy also makes them dangerous and harmful to living things.
Why Does Radioactive Decay Occur?Radioactive decay occurs when unstable atoms lose energy by emitting particles and/or radiation. Put simply, atoms become unstable and break apart to become more stable, and the process of releasing this energy is known as radioactive decay. Radioactive decay can be seen when certain elements spontaneously transform into other elements by emitting alpha particles, beta particles, or gamma radiation. Over time, these particles and/or radiation emitted cause the original atoms to become completely different elements.
To know more about alpha emission, visit:
https://brainly.com/question/28564218
#SPJ1
Calculate the [H3O+] and the pH of a 0.140 M H3C6H5O7 solution.
The [H₃O+] and the pH of a 0.140 M H₃C₆H₅O₇ solution is [H₃O+] = 1.49 ×[tex]10^-3[/tex]M, and pH = -log[H₃O+] = 2.83.
H₃C₆H₅O₇ is a weak acid, so we need to use the acid dissociation constant (Ka) to calculate the [H₃O+] and pH of its solution. The Ka for H₃C₆H₅O₇ is 6.3 × [tex]10^-5.[/tex]
The balanced chemical equation for the dissociation of H₃C₆H₅O₇ in water is:
H₃C₆H₅O₇ + H2O ⇌ H3O+ + H₃C₆H₅O₇-
At equilibrium, let x be the concentration of H₃O+ and H₃C₆H₅O₇-. Then:
Ka = [H₂O+][ H₃C₆H₅O₇-] / [H3C6H5O7]
Ka = [tex]x^2[/tex]/ (0.140 - x)
Assuming that x is much smaller than 0.140, we can simplify this equation to:
[tex]x^2[/tex] = Ka × 0.140
x = √(Ka × 0.140)
x = √(6.3 × [tex]10^-5[/tex]× 0.140)
x = 1.49 × [tex]10^-3[/tex]M
solution is a homogeneous mixture of two or more substances that are uniformly dispersed throughout the mixture. The substance that is present in the largest amount is called the solvent, and the substances that are dissolved in the solvent are called solutes.
Learn more about solution here:
https://brainly.com/question/30665317
#SPJ4
What is the wavelength (in nm) of the photon absorbed for a transition of an electron from n_initial=1 that results in the least energetic spectral line in the ultraviolet series of the H atom?
be sure your answer has the correct number of significant figures. note: reference the fundamental constants and si prefixes tables for additional infor
The wavelength (in nm) of the photon absorbed for a transition of an electron that results in the least energetic spectral line in ultraviolet series of the H atom is 121.6 nm.
This is derived from the Rydberg formula, which relates the energy levels of an electron in an atom to the wavelength of light emitted or absorbed in the process of an electron transitioning from one level to another. Using the equation E_n = -13.6 eV/n^2, we can find the energy level of the n_initial=1 electron state to be -13.6 eV.
Subtracting this value from the energy level of the n=2 state, which is -3.4 eV, we obtain the energy difference between the two states as 10.2 eV. Using E = hf = hc/λ, where h is Planck's constant (6.626 x 10^-34 Js), c is the speed of light (2.998 x 10^8 m/s), and f is the frequency of the absorbed photon, we can calculate the wavelength of the photon as 121.6 nm.
Know more about Rydberg formula here:
https://brainly.com/question/13185515
#SPJ11
how should you write the volume dispensed by a 5 ml volumetric pipet?
When writing the volume dispensed by a 5 ml volumetric pipet, it should be written as 5.00 mL.
A volumetric pipet is a laboratory instrument utilized to dispense very accurate and precise volumes of liquid. It is commonly used in analytical chemistry to make up solutions or to dilute stock solutions. Volumetric pipettes, also known as transfer pipettes or bulb pipettes, are single-volume liquid measuring instruments. They are meant to deliver a precise volume of liquid at a fixed temperature when the tip is slightly below the liquid surface.
It is important to write the volume with two decimal places to indicate the precision of the pipette.
Volumetric pipettes are utilized to prepare and dilute solutions. They are made of glass, with a round or conical end. They are intended to provide a precise volume of liquid, such as a certain number of milliliters or milligrams of a substance. Because of its accuracy, a volumetric pipet is used to create a standard solution.
For more such questions on volumetric pipet, click on:
https://brainly.com/question/28945018
#SPJ11
what were the factors responsible for the change of dead organic matter into fossil fuels?
which of the following relationships correctly express the clausius-clapeyron equation, which relates vapor pressure to temperature? select all that apply. multiple select question. a) ln p=-delta Hvap/R (1/T) +C
B) ln p=-delta Hvap/R (T2-T1)
C) ln p=-delta Hvap/nR T (1/T) +C
D) ln P1/P2=-delta Hvap/R (1/T2-1/T1)
E) ln P2/P1=-delta Hvap/R (1/T2-1/T1)
The Clausius-Clapeyron equation relates vapor pressure to temperature and the correct relationships are A, D, and E.
A: ln p=-delta Hvap/R (1/T) +C
D: ln P1/P2=-delta Hvap/R (1/T2-1/T1)
E: ln P2/P1=-delta Hvap/R (1/T2-1/T1)
Explanation:
The Clausius-Clapeyron equation relates vapour pressure to temperature. The relationships that correctly express the Clausius-Clapeyron equation are:A) ln p = -ΔHvap/R(1/T) + C (This equation shows that the natural log of the vapor pressure is inversely proportional to the temperature.)D) ln P1/P2 = -ΔHvap/R (1/T2 - 1/T1) (This equation shows that the natural log of the ratio of two vapor pressures is proportional to the reciprocal of temperature difference.)E) ln P2/P1 = -ΔHvap/R (1/T2 - 1/T1) (This equation is the same as equation D but the order of the pressure ratio is reversed.)Therefore, options A, D, and E correctly express the Clausius-Clapeyron equation which relates vapor pressure to temperature.
For more such questions on Clausius Clapeyron
https://brainly.com/question/24073811
#SPJ11
the role of sulfuric acid in the synthesis of pyrylium bisulfate is to
The role of sulfuric acid in the synthesis of pyrylium bisulfate is to create a favorable reaction condition by promoting protonation.
Pyrylium bisulfate is an organic compound with the formula C5H5SO4H. It is a white crystalline powder that has an interesting history in the area of color chemistry. The compound was first synthesized by Henry Gilman and Edith Roberts in 1937.
Pyrylium bisulfate is synthesized through the reaction of pyridine with sulfuric acid. In the reaction, the pyridine molecule reacts with a sulfuric acid molecule to produce pyrylium bisulfate as a result. The chemical reaction can be expressed as follows:
C5H5N + H2SO4 → C5H5SO4H + H2O
Sulfuric acid plays an important role in this reaction as it acts as a catalyst. The catalyst helps to promote protonation of the pyridine molecule. This protonation is essential to the reaction because it allows the pyridine to react with the sulfuric acid. When the pyridine is protonated, it is more reactive and can easily react with the sulfuric acid.
The reaction between pyridine and sulfuric acid results in the formation of a pyridinium cation. This cation then reacts with another sulfuric acid molecule to produce pyrylium bisulfate. The process is repeated until the desired amount of pyrylium bisulfate is formed.
In summary, the role of sulfuric acid in the synthesis of pyrylium bisulfate is to create a favorable reaction condition by promoting protonation. This protonation allows the pyridine molecule to react with sulfuric acid and form pyrylium bisulfate as a result.
for such more question on sulfuric acid
https://brainly.com/question/10220770
#SPJ11
how to use edurus and maxima potions simultaneously?
It is not possible to use Edurus and Maxima potions simultaneously in the Harry Potter world.
According to the books and movies, each potion has a specific purpose and cannot be combined for a stronger effect. Edurus is a healing potion that can mend broken bones and heal other injuries, while Maxima is a spell that amplifies the strength of a spell. Therefore, the two have entirely different functions and cannot be used together.However, in some Harry Potter video games, it may be possible to use these potions together. Still, it is not consistent with the canon of the books and movies. In conclusion, it is not possible to use Edurus and Maxima potions simultaneously in the Harry Potter universe, as they serve two entirely different functions.
For more questions on Edurus
https://brainly.com/question/30766927
#SPJ11
 Please help
The enthalpy of vaporization for water is 40.7 kJ/mol. Water has a vapor pressure of 101.3 ka at 100.0 °C. Using the Clausius-Clapeyron equation, what is the vapor pressure for methanol at 70.0
°C? Give your answer in kPa, to the first decimal point.
if 1.00 kg of zn reacted with excess sulfur, how much energy would be released? enter your answer as a positive value.
describe the different roles of electrons in the formation of ions in lithium chloride and covalent bonds in hydrogen chloride
Lithium Chloride: Lithium Chloride is an ionic compound, which means that the atoms are held together by electrostatic forces.
Roles of electrons in the formation of ions in lithium chloride and covalent bondsThe electrons in the outermost shell of the lithium atom are transferred to the chlorine atom, resulting in the formation of an ionic bond between the two atoms. The electrons that are transferred become part of the chlorine ion's electron cloud, giving it a negative charge.
The lithium atom now has fewer electrons than protons, giving it a positive charge and forming a Li+ ion. The chlorine atom now has more electrons than protons, giving it a negative charge and forming a Cl- ion.
Hydrogen Chloride: Hydrogen Chloride is a covalent compound, which means that the atoms are held together by sharing electrons. In the case of hydrogen chloride, the hydrogen atom shares its electron with the chlorine atom, resulting in the formation of a covalent bond between the two atoms. The shared electron is part of both the hydrogen and chlorine atom's electron clouds, forming a neutral H-Cl molecule.
Learn more about lithium chloride here:
https://brainly.com/question/29197367
#SPJ1
which solution has the highest boiling point at standard pressure? (1) 0.10 m mgcl2(aq) (2) 0.10 m mgso4(aq)
The solution with the highest boiling point at standard pressure is the one with the highest concentration of solutes, which increases the boiling point of the solution. In this instance, the answer is 0.10 M MgCl2(aq).
What is boiling point and standard pressure?
Boiling point: The boiling point of a solution is the temperature at which the vapour pressure of the solution equals the external pressure, allowing the solution to boil.
Standard pressure: One atmosphere of pressure is defined as the standard pressure.
A solution has the highest boiling point at standard pressure (1 atm) when it has the greatest concentration of solutes (molarity).
Which solution has the highest boiling point at standard pressure?
MgCl2 will have the greatest boiling point at a normal pressure since it has the most solute concentration.
The boiling point of a liquid is raised when solutes are added to it because the vapour pressure of the solution is lowered, thus more energy is required to break the intermolecular forces between the solvent and solute particles.
The boiling point of the solution rises as more solute is dissolved in the solvent, and the solvent-solute intermolecular forces become stronger, thus increasing the boiling point.
As a result, the 0.10 M MgCl2(aq) solution has the greatest boiling point among the options given.
for more information about boiling point at standard pressure refer here:
https://brainly.com/question/238983?
#SPJ11
Consider the reaction NH4HS(s) ? NH3(g) + H2S(g)At a certain temperature, Kc = 8.5x10-3. A reaction mixture at this temperature containing solid NH4HS has [NH3] = 0.166 M and [H2S] 0.166 M. Will more of the solid form or will some of the existing solid decompose as equilibrium is reached?
The given equilibrium reaction is: NH4HS(s) ⇌ NH3(g) + H2S(g)
What is equilibrium reaction?
An equilibrium reaction is a reversible chemical reaction in which the forward and backward reactions occur at equal rates. At equilibrium, the concentrations of the reactants and products remain constant, and the rate of the forward reaction is equal to the rate of the backward reaction. In other words, the system is in a state of dynamic balance, where the concentrations of the reactants and products do not change over time.
The equilibrium constant, Kc, is given as 8.5 x 10^-3 at a certain temperature. At equilibrium, the concentrations of NH3 and H2S are given as [NH3] = 0.166 M and [H2S] = 0.166 M. We are asked to determine whether more of the solid NH4HS will form or whether some of the existing solid will decompose to reach equilibrium.
To solve this problem, we can first use the equilibrium constant expression to calculate the equilibrium concentration of NH4HS:
Kc = ([NH3] x [H2S]) / [NH4HS]
8.5 x 10^-3 = (0.166 M x 0.166 M) / [NH4HS]
[NH4HS] = (0.166 M x 0.166 M) / 8.5 x 10^-3
[NH4HS] = 3.25 M
The calculated concentration of NH4HS at equilibrium is 3.25 M, which is greater than the initial concentration of NH4HS. This indicates that more of the solid NH4HS will dissolve to form NH3 and H2S, rather than some of the existing solid decomposing. Therefore, the system will shift towards the product side to consume more NH4HS and form additional NH3 and H2S.
To know more about chemical compound visit :-
https://brainly.com/question/26487468
#SPJ1
Answer the following questions for 1,3,5-hexatriene, the conjugated triene containing six carbons. 1) Which p molecular orbitals belong in the following categories? Select all that apply A) Bonding: p 6*, p 5*, p 4*, p 3 , p 2, p1 B)Antibonding:p 6*, p 5*, p 4*, p 3 , p 2, p1 2) Select which p molecular orbital is the: A) Homo: p 6*, p 5*, p 4*, p 3 , p 2, p1 B) Lumo:p 6*, p 5*, p 4*, p 3 , p 2, p1
The categories for the p molecular orbitals are:
Bonding: p3, p2, and p1.
B) Antibonding (p 6, p 5, and p 4)
The p orbitals of the carbon atoms engage in delocalized pi-electron bonding in a conjugated system like 1,3,5-hexatriene. Although the antibonding molecular orbitals (ABMOs) are created by destructive interference, the bonding molecular orbitals (BMOs) are created by constructive interference of the p orbitals. There are three BMOs and three ABMOs in this situation.The Lumo is the lowest vacant molecular orbital, whereas the Homo is the highest occupied molecular orbital. The occupied molecule orbital with the highest energy is the HOMO, while the molecular orbital with the lowest energy is the LUMO. The HOMO and LUMO play a crucial role in conjugated systems because they are engaged in electron transitions that result in UV-visible spectroscopic characteristics like absorption and emission wavelengths.
learn more about conjugated system here:
https://brainly.com/question/30597949
#SPJ4
predict the molecular geometry and polarity of the so2 molecule.
Due to the unequal distribution of electrons between the sulphur and oxygen atoms, the molecular geometry of the SO2 molecule is twisted or V-shaped, and it is polar.
Three atoms make up the SO2 molecule: one sulphur, two oxygen. The two oxygen atoms are covalently connected to the sulphur atom, which is the centre atom. The configuration of the atoms around the sulphur atom in the middle determines the molecular shape of SO2. The SO2 molecule is bent or twisted because the two oxygen atoms in it are situated on opposing sides of the sulphur atom. A bent or V-shaped molecular geometry is the outcome of this. Because the two S-O bonds' bond dipoles do not cancel out, the molecule as a whole is polar.
learn more about molecular here:
https://brainly.com/question/14925933
#SPJ4
